Changing the defined disabled?

Similar Questions

• Wireless Internet takes awhile to connect after the sleep or Hibernate? Already changed the wireless power management settings

  Hello

  I have a Dell XPS 17. I bought last week.

  My internet config:

  Intel Centrino Wireless adapter N 1030.

  I already changed the settings disable the wireless adapter power management "allow this computer to turn this device to save power". After looking at other threads I also did this for USB ports. Drivers have been updated to the last pilot intel: 14.3.0.0

  Whenever I put my PC in sleep or hibernation from the recovery, it does not automatically connect to the internet, and when I select the wireless network, it takes a long time to connect, at least 2-3 minutes. Normally, it displays ' windows takes long time to connect.

  The network is selected to connect automatically, but it isn't after the mode 'sleep'.

  Everything works fine when I stopped and power on as usual. Just not in "standby mode"!

  Hi PMDAY2013,

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• Person changes button is disabled because of the events of life

  Hello

  I am trying to create a new life event 'new hire' type work. However, I find that define the changes of no and related person change button are disabled.  Kindly let me know what needs to be done. Receive a quick response.

  Thank you

  Paul George

  Hi all

  Thank you very much and I found a note related to this problem and it is mentioned here that if OAB (Oracle Advanced benefits) is not fully installed then the button is disabled.

  Kind regards

  Paul George

• I have two problems: 1) a theme that does not change the look of my Firefox at all 2) there is no button 'disable' for my themes only 'delete '. Help, please!

  Okay, so my problems are...
  (1) I downloaded a theme for the first time and when I did, it worked perfectly fine. After updating, I download the theme again and it helped, but the theme will not change the look of my browser. When I tried one of the relevant articles, I cleared my cookies and cache and downloaded the theme (A Blue Fox), installed and turned on, and it worked perfectly fine! I tried to upload another (Pink Fox), one installed and activated, but it did not work. Instead, he returned to the default theme. So I tried to clear my cache and cookies again and repeat the process, but now after downloading, it says "error".... "I don't know if it says"Error Downloading"or"installation error ". Now, I tried to download it again after turning off my computer and turn it back on again, but (today), the two has not applied to my browser. They both had the same look... by default! Please tell me what is the problem!
  (2) in my "Add-ons Manager" page, on the appearance tab, there is no button disable for my modules. Only the "delete" button is present.

  Please help me!

  NOTE: I already tried to reset Firefox, but it does not solve my problem.

  You do not disable a theme, but you choose another theme if you want to change the theme.
  
  Remove button is for when you no longer want this theme.

  You must select a theme and then close and restart Firefox, if you want to use this theme.

  If this does not work, then you may have a problem with the prefs or something interferes.

  If you don't keep changes after a reboot then see:

  • http://KB.mozillazine.org/Preferences_not_saved

• Hello, my backup is disabled, and I can't change on how I can change the?

  Hello, my backup is disabled, and I can't change on how I can change the?

  Exactly what did you do (including all the troubleshooting steps you took) and what exactly happened?

• How to change the constant value for the property node "Disabled"?

  Hi all

  I enclose one vi example of what I'm willing to do. It happens during the event for "left selectorrogrammed 1: changing values.»

  Basically, I created a property to a Boolean LED control node. Once clicked, I'm eager to turn it off so that the user cannot change the value (I have a reset all button for use on that).

  I created the node property for this control for disabled people.  When I'm in the block diagram, I change to write mode.

  I rt clicked on it and said: ' create constant ", he does.  However, the constant comes each time as "Enabled". I tried clicking on this constant and looking through all of that property, but I can't find a way to scroll the values or set the value of this constant to "Enabled" to "disabled."

  I see where you can change the elements of this constant... but I guess there is a way to switch this constant to the value you want... any suggestions?

  Thanks in advance,

  Cayenne

  To change a constant value, your cursor must be in the mode 'finger '.

  You can select this option in holding down the SHIFT key and right-click on the diagram - then select the finger.

  Another way is to put the automatic selection of tools:

  Tools > Options > environment > lock automatic selection of tools

  With this option, LabVIEW will choose the tools for you.

  Play with him a bit to see how it works.

  Steve

• Is it possible to change the values of particular #define of the various controls in CVI.

  In my application, I have different panels to file single .uir. When I save the .uir file, I get the same values of #define for different controls in different panels. For this reason, I am not able to use these #defines block switch. Is it possible to change the values of #define according to my condition.

  Hi, a little more Wolfgang post. It is the combination of the Panel to manage and control the unique ID: as you know, you can load the same panel more than once, so even if you recover the full chain of PANEL_CONTROL you have duplication. items that exactly identifies a particular control in a particular group are the combination control panel manage AND panel_control ID.

  On the one hand which guarantees more flexibility to your application, you can design only a few panels and reuse them whenever you want, even having some of them loded several times in the same instant. On the other hand, as you have discovered, there is the possibility (Finally, almost certain) duplicated in your app ID.

  To resolve the problem of duplicated IDS you can act in two ways:

  1. If you know that no Panel is never loaded several timer in your application, you can retrieve the name of constant of Panel with GetPanelAttribute (panelHandle, ATTR_CONSTANT_NAME, string); and to distinguish between the name of constant, then switch between control ID

  2. If you happen to have duplicate panels you will need to store each panelHandles in the non-volatile variables, switch between them and then switch between the control ID

  An alternative might be to use Panel callbackData attribute and assign a significant value during the loading of the Panel, other callbackData finally from a control ID. Something like this:

  Loading panels:

  panelHandle = LoadPanel (0, "myfile.uir", PANEL1);

  SetPanelAttribute (panelHandle, ATTR_CALLBACK_DATA, (void *) 1);   Assign different callbackData in each instance

  During the failover between controls:

  void * cbkd;

  GetPanelAttribute (panelHandle, ATTR_CALLBACK_DATA, &cbkd);)
  Switch (cbkd (int)) {}
  case 1: / / elements of the PANEL1
  switch (command) {}
  case PANEL1_NUMERIC:

  your code here
  break;
  case PANEL1_STRING:
  your code here
  break;
  }
  break;
  case 2:
  // .....
  break;
  }

  One final note: it seems to me that all this is necessary in a very limited situation, where you have the same callback called on various panels/controls. Whenever the reminder is unique to a specific panel or controls on a single panel you don't need to work that way.

• In XP, cannot change the way users log on and outside, getting the error "a recently installed program has disabled the Welcome screen and the user fast switching.

  The switch on my fast computer of user function has been disabled on my computer. When I try to use this function. I get the following message.

  A recently installed program has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the program

  . The following file can help you identify the program that made the change. GT Gina.dll

  * original title - I have a windows xp. Under user accounts, choose a task. Under change the way users log on and outside.  I get a message that the function of the Welcome screen has been blocked *.

  Hello

  You can try the steps outlined in the article below and check out them.

  The logon screen "Welcome to Windows" does not appear when you start the computer
  http://support.Microsoft.com/kb/817142

• Try to change the wallpaper, it says that this feature has been disabled contact admin system

  original title: wallpaper

  Try to change the wallpaper, it says that this feature has been disabled contact admin, me, system how can I get rid of him?

  If you did not disable the ability to change the desktop background, then you can be infected with some form of malware on your computer. I would recommend that you run that a full and spyware antivirus scan to make sure that your computer is clean.

  Try this:

  1. click on start-> Type on the start search: type gpedit.msc-> press ENTER.
  2. under Local computer policy, expand "User Configuration".
  3. under User Configuration, expand "Administrative Templates".
  4. under administrative templates expand 'Desktop '.
  5. under the desk, click on "Desktop", on the right pane, double-click "wallpaper".
  6. on the "Desktop WallPaper properties" click on the option button "not configured".

  I hope I could help

• How can I disable the Speedstep settings or change the IRQ?

  I'm doing a record with external USB audio interface and speed of 700 m (Intel Pentium Mobile Centrino) seems to have an impact on the recording. I get blips every 40 seconds that make it impossible to get anything recorded. When I turn the SpeedswtichXP for power settings, the blip becomes more frequent and even more disturbing, about every ten seconds.

  I'm running an Insipron 700 m with Windows XP SP3. If it helps, the Audio interface / Midi is a M-Audio Fast Track Ultra 8R.

  My guess is that I have to disable Speedstep. But my BIOS does not have this option. Is there an option to change my IRQ, a separate but related matter. I tried to upgrade (flash) BIOS that Dell offers on its site, but I must have version cureent th because nothing has changed.

  If someone could help understand me how to turn off Speedstep in BIOS or change the IRQ of the external devices on my system, I'll ask them to marry me... uh, or not. I'll be super happy however. Thank you!

  
  

• Can just disable us the pop-up alert message "Windows - delayed write failed"? for example to change the pc registry policy or change etc...?

  Can just disable us the pop-up alert message "Windows - delayed write failed"?

  for example to change the pc registry policy or change etc...?

  not a virus infection problem.

  Our PC operating system have been using XP and Win7.

  These error message that we ran the backup with Windows XP and Win7 PC client process.

  Backup the software client PC named SSR 2011.

  Tom

  Hi Tom,

  The question you posted would be better suited to the TechNet community. Send the query in the link.
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt#Forum=w7itprogeneral%2Cw7itprovirt&filter=AllTypes&sort=lastpostdesc&content=search

  Hope this information helps.

• How to disable or change the General the keyboard shortcut "CTRL + Shift" that switches between multiple keyboard entries?

  I use the Switzerland of Windows 7 version in English on a German keyboard (QWERTZ).  The general shortcut to switch between QWERTY and QWERTZ keyboard's CTRL + SHIFT. When you use Excel, I use this combination all the time with arrows to navigate large worksheets.  If I start a movement, only by pressing CTRL + SHIFT, but do not press the arrow, I find keyboard layout changes.  Is it possible to change the General shortcut or for otherwise, delete or disable this feature?

  Hi Thalwil,

  What is the number and model of your computer?

  You cannot use the shortcuts by default windows to other applications unless the application has been designed accordingly.
  
  If you want to change your keyboard type to refer:
  http://Windows.Microsoft.com/en-us/Windows7/change-your-keyboard-layout

• Password changed after you disable the login screen

  Then I disabled my login screen, today and now when I start my computer, it brings me to a page that said 'incorrect password' and then returns to the login screen. Then when I enter my password it does not work. It seems that my password has been changed somehow when I disabled the login screen. In the meantime I can use my fingerprint reader to log on, but if I were to ever lose a finger in the future I wouldn't be able to access my computer. So, how can I reset my password?

  Curiously the admins cannot change her password without having to type the current password, but they can change the password of any other account without knowing the password.

  Not true - see here:

  1. click on the start planet.

  2. type the three letters cmd in the search box.

  3. press on Ctrl + Shift + Enter

  4. click on "run as Administrator".

  5. type the following commands and press ENTER after each:

  NET user "Zach" 123456
  The command above will set the password of the account selected to 123456.

• Disable the keyboard screen and change the currency format.

  Original title: parameters

  1. whenever I start my windows 8 pro, keyboard display on this subject...
  How to disable that?
  2. in the windows store, the currency format is in Euros. How can I change the Indian currency?

  Hi Shakur,

  You can disable the keyboard on the screen of the accessibility.

  Note: The touchpad is disabled permanently.

  Steps to follow:

  (a) press "Windows + R" and type 'control' in the open field.

  (b) in the search at the top right field, type "ease of access" and open the "accessibility".

  (c) click on 'Use the computer without a mouse or keyboard' and uncheck the "use of on-screen keyboard" if it is checked.

  (d) restart the computer and see if you still face the question.

  To purchase an application from the Store in a specific country or region (based on the location of the House for your PC), you must use a method of payment of that country or region.

  Here is a link that tells you how to change the method of payment in store Windows:

  Add or change your payment method for the Windows store

  http://Windows.Microsoft.com/en-us/Windows-8/Add-Edit-payment-method-Windows-store

  For more information, see the article:

  Set your preferences for the Windows store

  http://Windows.Microsoft.com/en-us/Windows-8/set-preferences-Windows-store

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Is it possible to change the title of the integrated login form, of "Login" to something custom defined (for example "Login MyApp")?

  Is it possible to change the title of the integrated login form, of "Login" to something custom defined (for example "Login MyApp")?

  Thank you

  Ivica

  Matthew,

  Good document! I'll try to do my own login screen suggest you. It would be the right solution for my client.

  Thank you