Channels in the Panel layers appear reversed when they are not

Similar Questions

• Folders appear empty when they are not

  I am a new user and if competent would not consider myself particularly knowledgeable.

  I want only the P3 player to listen to music or audio books while working so once loaded that I have loaded to the top with a few books.  I used just drag / move (as by accident he only would allow me to put them in the music folder).

  Everything worked well, it loaded, I listened to etc.  Until I came to change for some new books.  I have connected to the computer (Win 7) in Explorer, the player ended up with predefined folders but I was told that there is no file in the music folder.  I checked on the player, and they are there.  I tried to load a new file on in any case.  I was told that it there was not enough room.

  I checked how many the player has been used: almost all of it - still checked every file individually this is a not add up!

  So I don't see any of my files, I cannot delete any and can't put new.  I tried on 4 different computers.

  I tried to sync with Media player thinking it would eliminate what was out there.  No pass - it just tells me that there is not enough room.

  Am I missing something obvious?

  The easy way to clear the contents of your drive:

  Under the player settings - menu system settings, there is an option to Format (or reformat).  Select it and the content that you have added to your drive will be deleted (this will not delete the files system of the player).

  The option for setting USB also can be found here, for the value MSC or MTP (avoid self!).

• How is it, I don't see any of my themes of appearance, even when they are turned on?

  I don't see one of my themes of appearance, even when they are activated. I tried deactivating and reactivating them and gone through all my themes, but none show except the default 20.0.01; which when I try other themes shows even when it is disabled.
  Also, I don't see any new themes when I try to preview them or hover over with the mouse.

  Sorry, but if you start automatically to the top in private browsing mode, this is a bug that has been tracked and should be corrected in the next version of Firefox. More information: themes, not more function from auto update to firefox 20.

• My iPhone think that my headphones are plugged when they are not if will not play music or alerts through the speakers. What should I do?

  My iPhone randomly started thinking my headphones are plugged when they are not. As a result, it won't play music or message/call alert through the speakers. What should I do?

  Try to push the helmet a few times to move the switch. If not, then please post something here and I'll be happy to help you further.

  AppleMan

• How to stop the movieclip created in flash when they are imported to seduce?

  I created a movieclip and drag it onto the main timeline(flash cs4), the movieclip have 60 fps and I put stop(); the last image. When they are imported from the swf to Captivate, the movieclip loop play. I tried the rdcmndPause = 1; but don't know where to put it. I don't really know the idea how to proceed. (already search in the forum and read adobe help, but no step by step how to do this).

  Hello

  Maybe try to animate your Flash in the main Flash timeline. I don't know if it is possible to promote a MovieClip to the main timeline, but usually people want the animation to loop and it doesn't and it is because they have not animate in a MovieClip. They did it in the main Flash timeline.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Video input appears tense, when they are imported into Premiere Pro CS6

  I'm on a level of beginner on Premiere Pro, so please be nice if this question is very basic. I'm doing a video that preserves the video resolution of entry exactly. My video entry was a MP4 movie with a resolution of 1440 x 1080. It is a recording of screen iPad using the X-Mirage software. When I opened normally in quicktime format, it seems not tense. However, when I imported the clip in first, the clip appeared tense. I checked the properties of the element, and it proved to have Pixel Aspect Ratio 1.3333, which means that the pixels are elongated. My output sequence was also strained because of this, although the output indicated that the resolution is the same: 1440 x 1080. I tried to comply with the "Clip Mismatch warning' and the result was still a stretched version. Help, please!

  

  

  I'm guessing that first interpreter clip homesick. He probably than her video hdv 1440 x 1080, which is equal to 1.33.

  Go to interpret images and set the format of the pixels to 1.0.

  See if that will fix it.

• Canon 5 d Mark ii Images with the value of the white balance fixed. When they are imported into Lightroom, the value is different.

  If I take a shot with the fixed value of 5200K WB (5 d Mark ii) and import into LR 2015.2.1, happens to 4850K. No presets or applied adjustments.

  No idea why? How can I solve this problem?

  Rich

  All raw converters use four multipliers of white balance RGGB tinted and embedded in the raw file EXIF data to set the white balance and 'calculate' the temperature values displayed inside the module development LR WB.

  Scroll down to the "White Balance" section of the DCRAW tutorial PDF here: GUILLERMO LUIJK > TUTORIALS > DCRAW TUTORIAL it's all so raw converters all the rest of the white raw file and 'calculate' the temperature and tint values.

  Here is a Canon 5 d MKII CR2 file with the White Balance adjustment 'in the know' behind closed doors:

  (Data EXIF Maker Notes)

  

  The setting "As Shot" WB in LR shows a Temp of 4800 reading, which should produce a slight visual difference that the planned in-camera closed 5134 parameter, correct?

  

  However, with the LR settings file, "As Shot" above the white balance CR2 is the JPEG file in camera perfectly on my Canon 5 d MKII (raw + JPEG file format). It's just that Temp readings do not, because they are "calculated" four RGGB multipliers. Each raw (LR, opening, C1) converter will probably show the values of temperature and tint different, since they are derived by using "reverse engineering" of the manufacturer of exclusive camera raw data structure and camera sensor response file.

  Keep in mind that the spectral response of the camera is affected by changes in batch. A Canon 5 d MKII body can produce slightly different WB as one another using the same exact settings. Rather than depend on private clos or LR presets use a good white balance card or the ColorChecker Passport to 'calibrate' LR white balance settings standard shooting conditions (daylight, cloudy, Flash, etc.). For critical projects draw card of the white balance at least once for each unique lighting condition. You can then determine the correct inside the LR setting and settings of synchronization of the World Bank through all the images taken with this specific lighting.

• Design of a logo for a client, when they are not sure of the intended use

  Hello

  Can someone tell me a good "rule" in the design of a logo for someone who does not know what size they want to use this logo in the future? If they do not know what print size they can (business card size or more big sign) - what size is the best to give them AND if they don't know what web size they need, what size is good to give them where they have room to resize? What format is best, I? or pdf?

  This is especially a concern if the logo is done in Photoshop. Any suggestions on standard dimensioning or normal practice in this case? Thanks in advance - K-

  In general, I would like to put the logo to any size that fits on a format sheet paper letter so that the customer can easily print on almost any printer of office as is. If you are an Illustrator *.ai or EPS file without linked or embedded, bitmap images then you don't need to worry about the final size in its various applications, as it will scale without loss of resolution. It can be used for a business card or a billboard.

  If this is done in Photoshop, then you can start with a master file which is enough PPP resolution larger size of the logo of the application. Then, you or the customer can downsample from there. (But since we are in an Illustrator forum and not a forum for Photoshop, I'll show my prejudices Illustrator here and recommend that you use Illustrator for logo if possible work ;-)

  Always handy to give a customer a PDF and JPEG version in addition to .ai or .eps files in case they do not have a Postscript printer or Illustrator.

  Others may have standard practices to suggest.

• Windows Mail displays messages with attachments, even when they are not

  I am running Vista Business SP2 and Windows Mail 6 worm.

  Many, but not all messages display attachment in the attachment column icon, but they have no attachments.  When you click on the message, there is no icon of attachment in the message header.

  Messages that have attachments are working very well.

  Is there a setting that can be changed so that these messages that really have no attachments do not appear as they do in the attachment column?  I went through all the settings options and found nothing.

  You will be always safe without analysis of electronic mail.

  Viral irony: the most common Cause of Corruption:
  http://www.Microsoft.com/Windows/IE/community/columns/filecorruption.mspx#EOAAC

  Why you don't need your anti-virus to scan your email:
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Disable the email option in your antivirus scanning software:
  http://www.oehelp.com/OETips.aspx#3

  And it is from Symantec, but applies to all anti-virus programs.

  From:
  http://snipurl.com/bmf6

  My computer is always protected against viruses if I disable e-mail analysis?

  Disable e-mail analysis won't let you without protection against viruses that are distributed as attachments to email. Norton AntiVirus Auto-Protect scans incoming files as they are saved on your hard drive, email and attachments to emails. Scan to email is just another layer on top of that. To make sure that Auto-Protect provides maximum protection, keep active Auto-Protect and run LiveUpdate regularly to ensure that you have the most recent virus definitions.

  You could always dump AVG and MSE try. It has no analysis of electronic mail and is well rated. MS made mistakes certainly, but they got this right.

  Microsoft Security Essentials
  http://www.Microsoft.com/security_essentials/default.aspx

  Bruce Hagen ~ MS - MVP [Mail]

• iPhone says headset connected when they are not

  I have a Verizon 6 iPhone with software update iOS 9.3.2.

  Today, I found that, when answering a phone call, the caller could hear me talk through the microphone of the iPhone, but I couldn't hear any speaker iPhone sound when holding it up to my head. However, if I passed it to speaker, I could hear the voices of the appellant normally.

  When I press the volume up/down buttons, the window that opens displays the volume bar is labeled "Helmet" at the top.

  If I plug in the headphones, I can hear audio and telephone calls from other applications normally. However, if I unplug the headphones, he still seems to think that they are connected.

  I don't think that Bluetooth is a problem, because I tried to disable Bluetooth before turning off all Bluetooth devices.

  Thinking that perhaps it would be a physical problem with the headphones, I have it plugged and unplugged the headset several times, but it does not help.

  By the recommendations contained in a file of help here, I tried to restart the phone, but it does not help. As noted above, the software is updated.

  This sounds like a hardware failure with the plug headphones? Or is there anything else I can try?

  Hey FrankO23,

  Thanks for this info and choosing the communities Support from Apple. I know that have a problem with the sound on your iPhone is not a good time!

  Based on what you said, it seems that you have problems with the headphone jack, as you mentioned. Discover the steps in this link and if these steps do not resolve your issue, contact Apple to get your iPhone inspected further.

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone

  Contact Apple support

  See you soon!

• Help!  Slide progress when they are not supposed too

  Need help as soon as possible.  Captivate question 7...

  I have an e-Learning very simple.  On the slide, it will play an audio short (4 to 8 seconds) with a screenshot.  I click on the screen capture boxes that are defined on run back and forward (to the previous slide, go to the next slide).  Click the boxes on display for the entire slide and are put on pause for the legends of success or failure.

  Here's the thing... it WILL take a break at the start.  But if the user clicks ANYWHERE on the screen, it advances.  I want to move forward only when they hit the box click Next.

  I tried to change the option "on success" (go to slide 3, etc.), I also replaced the boxes click with buttons, I also hid a box invisible click that hides and pauses for the slide and none of it works.  No matter what I try, the slide advances once the user clicks anywhere.

  I am using Captivate for almost 5 years, but I'm stuck with this one.  We have similar elearnings that will work perfectly.  Any ideas?  I'll post some pictures...

  OK, so we have found two solutions.

  1. as stated above, we changed the original PPT (disable ahead of characteristic click), created a whole new captivate file based on the updated PPT and copy/paste the call outs + click boxes + audio + etc. in the new file.  This works.  No advance without clicking in the box click OK.  NOTE to readers: I tried to fix the PPT, and simply reinserting in the existing captivate file (basically import the PPT updated the broken lesson) and that has not worked.  I had to do more in a new lesson of captivate with the PPT update.  If this solution works, but there is a lot of work.

  2 - the 2nd solution (weird), is to insert an image in the captivate slide and merge with the background.  This will stop the slide to move forward until the user click in the box click OK.  Originally, all of our screenshots are in the TPP, not the captivate file.  So, when we import the TPP, there already the image that we need.  Now, I just insert a new image on top of the blade of captivate > size > fit > merge with background and this prevents the slide to move forward (unless the user clicks on the appropriate box click).  I have no idea why that works.  It's also faster that you rebuild the project.

  Thanks for your help.

• Is it possible to use a box Structure to hide digital indicators on the front panel, when they are not in use?

  I'm rather new to LabVIEW, only used for about 1.5 weeks from this post, it means that I may be missing something pretty obvious due to ignorance, but is it possible to make my front to change as my changes of breakage due to the selection of the user to a certain case via the front panel?

  The goal of the program is to make a simple layout for a user who uses the digital multimeter that the proposed code is designed for and I don't want tons of digital controllers and such clutter the screen that do not work with the function of the user uses to measure with.

  Thanks in advance.

  Yes.

  Two ways: 1. use a tab control.

  2. use of property nodes (Visible property).

  The tab control is a bit easier on the block diagram, but if some controls should appear in many cases it is difficult to do.  Property nodes take more space on the diagram but allows you the versatility to do almost everything you want.

  Read the help files and look at a few examples.

  Lynn

• XPS 17 L701X audio controls control panel no driver found when they are affected

  When you tapoterez control audio control panel on the Control Strip, I get the message: "Please install the audio driver before using this button."  This button is supposed to launch the control panel Audio from Dell.  I don't know which driver is missing and would appreciate any help on how to install it.

  It is possible that your laptop has a generic HD audio driver Windows installed. This pilot will allow you to have audio but takes does not support all the audio features. That is the case, then install the driver audio Realtek HD to your laptop in the Audio category on the XPS L701X download page.

• Always displayed in the form of closed lines - even when they are not

  Hello

  I searched around a response for this but all I found are answers about the evolution of the degree of openness are bad - so sorry if it's easy.

  I have a line that I left open but Illustrator retains the display it closed when I preview the illustration.

  How you force illustrator to correctly display the open paths?

  Any help would be appreciated.

  See you soon

  Ben

  That is your problem. Select the objects, and then click the expand button in the Pathfinder Panel

  

  After this just click on the straights to remove.

• After the upgrade to 16.0.1, entered the flash menus bar menu when they are clicked on.

  It also occurs in any folder that I have in my bookmarks toolbar. Restart in safe mode resolves the problem, but it returns after you restart normally. I also went through all my Extensions and Plug-Ins to disable individually and restart after each, but I found myself with any of them activated and the problem persists.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/