Character encoding does not work.

Similar Questions

• VI quadrature encoder does not work after programming of FPGA

  I'm rather new on the MyRIO, and I work on the motor of the MyRIO and read control in a quadrature encoder at the same time. Programmed individually, the two pieces of work at Marvel, but once I have combine them and try programming, control of motors not to not work signals, but the reader encoder does not work. I use the Express VI for the LabVIEW quadrature encoder reader, and I produce four stepper motors signals using FPGA.

  It seems as if the encoder is disabled when I program the FPGA with my code, because if I have two parallel loops, one for the reader encoder and the control of step motors, if I stop the loop of step motors, the encoder works immediately.

  Is there something simple that I'm missing?  Any suggestions would be greatly appreciated!

  Thank you

  Enan

  I realize now that my last answer could have been confused and not useful to someone else who may come across the same problems later.

  Here is how I solved the problem I've had:

  I had to derive Boolean expressions for an encoder quadrature (essentially to create my own) and then used the outputs (UP, DOWN) to increment/decrement a counter using the conditional statements. Then, I stored the value of direction in a flip flop implemented using two conditional statements of T/F in series and connected to a shift on the edge of the loop register.

  It was all able to be implemented in a single cycle timed Loop, and then I managed to place in the same loop that I used to control stepper motor.

  In this way, I could have a VI collected in a Bitfile and could be programmed to the FPGA.

  Hope this is clearer!

  Enan

• Gzip encoding does not work

  For some reason, there are a few problems with the encoding of internet files which does not not specific files.

  some research more told me there is a problem with gzip encoding (I'm not sure that all deflate). Decompression doesn't seem to work.

  Below you can see the result a website (http://vagrantcloud.com) where the CSS file failed to load. Obviously, no tag.
  http://imgur.com/dPuv2S7

  If you need more information about this issue, don't think and just ask in the comments.
  I hope this will be fixed soon.

  Looks like a problem of specific site. I use many sites like vagrantcloud and vagabond as sysadmin. It seems that the server (or CMS-system) does not work well with the application of pipeline. For this reason, the generated files (CSS or JS) are not completely generated when the HTML is sent through. This could be the reason why I had the problem that with the CSS which was not able to load (JS is almost never generated by a server)

  @jscher2000 I think the sign of mixed content is also resolved by turning off the pipeline processing.

• Export to Flash (.fla) file! -Media encoder does not work. Export failed!

  Hello

  A few weeks ago, I bought creative cloud and especially Flash Pro programs.

  I use a PC for Windows 8.1.

  I had just finished my project and wanted to export by clicking on file-> export-> export video. Now, a new Panel arrives and wants to know certain specific issues, as usual.

  After you click 'Export', he will now try to download this file to the Media Encoder. And that is the problem: Flash, then mentions that the file could not be imported to the Media Encoder, and at the same time the media encoder will say the same thing: "this file cannot be imported", or "this file cannot be read.

  I don't understand the media encoder cannot be not able to import a normal "FLA" - file and then put it in a .mov, .mp4 or whatever it is for Windows.

  I did not and do not want to use the quick time player, that the video would be able to play whith. And I can't imagine that the media encoder does not have Windows-compatible video formats to be does. But, as I mentioned before, it is not yet I would go that far, because he's not import the file!

  I already tried to reinstall all the programs, and each of them are also updated!

  So far I have not really found someone with this problem after doing a lot of research on the Internet!

  Thank you very much!!

  Your

  Rich

  You can open the video in any player after convert you, but adobe media encoder requiring some QuickTime plugins to work...

• See character key does not work the keyboard.

  original title: keyboard problems

  the

  @ button will not work unless I have copy and paste the table of characters, but then on the odd occasion does not work. Why is this and can I do about it?

  Hello

  1. What is the serial number and model of the keyboard?

  2. is the specific question of the @ key?

  3. have you made changes on the computer before this problem?

  For general information, to obtain @ key on keyboard, you must press shift + 2 buttons on the keyboard at the same time.

  Check if it works fine with the keypad.

  http://Windows.Microsoft.com/en-us/Windows-Vista/type-without-using-the-keyboard-on-screen-keyboard

  You can also check if the problem is keyboard or does not connect the external keyboard.

  Also: check if the keyboard input language is defined accordingly.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-input-language

  I suggest you to fallow the below methods:

  Method 1:

  Run the fixit available in the link below and check if that makes a difference

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

   

  Step 1: Check in SafeMode with network.

   

   

  You can also check if the problem persists in safe mode with network and check.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If the key on the keyboard does not work, then fallow step 2.

   

  Step 2: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Hope the above information is helpful.

• Menu of character encoding does not

  I have updated the app today to the latest version. When I tried to change the character encoding on a Web site that does not display properly, I found that by selecting another encoding did nothing except check the circle next to it.
  The only thing I could do from there was to click on cancel or press return on my phone. It becomes a bit annoying surfing a few sites now since I can't fix the coding.

  I filed bug https://bugzilla.mozilla.org/show_bug.cgi?id=1003897

  It seems that this problem is fixed on Firefox 30. As a workaround, you might be interested to install Firefox Beta out Google tomorrow when update us. It will be 30 Firefox.

• My media encoder does not work anymore and finally fails when it gets to the jpeg format...

  .. few of the jpegs, I got it to fit the size of the screen, som, I didn't--doesn't seem to matter.  I'm relatively new to working with Adobe, so any help would be appreciated.

  Thank you!

  Hi Ray,

  Make sure that the jpg is in RGB format (check in Photoshop or other). In addition, is not superior to, say, 4000 x 4000 pixels.

  Thank you

  Kevin

• "BOLD" in the character tag does not work in the cross-reference text

  Hello

  I use cross references to introduce pieces of text that are repeated in two chapters. The referenced text includes characters of the text that is defined in a character tag. The chapter where I insert a reference to the text has the same exact character tag in his catalogue of character (I imported the character formats to be sure). But bold disappears in the cross-reference text. Any ideas on how to do bold appear?

  Thank you

  Tami

  Character formats or text attributes caused by Variables seem to be kept on the xref.

  What might work, however, is to put the text in a file external FM and bring it as a Medallion.

• Camera flashes in the audio window and a camera when using HD Pro Webcam C920 with Mac 0s 10.10.3 character animation - does not work.

  Wen, using my HD Pro Webcam C920 with my MAC pro with OS 10.10.03 the camera and audio Panel flashes just market every second or so and there is no connection to the tracker or facilitator. Y at - it an inconsistency with the camera?

  Solved the problem by turning on another webcam program (Facetime) and it seemed to stabilize the camera.

• Encoded video does not work on Toshiba Blu - ray disc player

  I have a problem I'm trying to encode a sequence of images into a video container, but does not work the video encoded on toshiba blu - ray disc player... I use the following command to ffmpeg to encode images and convert a video:

  ffmpeg-i "C:\ManVsWigan\Frames\%d.png" - vcodec libx264 'C:\ManVsWigan\encoded.mp4 '.

  I have tried several video codecs but no luck yet
  "- vcodec mpeg4.
  "- vcodec mpeg2video.

  If you have an idea please help me

  >... I'm trying to encode a sequence of images into a video container
  Please be so kind and try to explain why you need all this?

  I mean Toshiba portable computers offers equipped with pre-installed readers and offer laptop owners to enjoy watching BD movies. Everything else is not interesting for s Toshiba support I guess that if I put t think that this question has something directly with Toshiba.

  Have you tried to find the answer on another forum?

• character animation camera does not work

  Hello

  Does anyone know why my camera does not work in character animator.

  The audio does not work.

  In the preferences of character animator, I only see "audio equipment"! and nothing about the video or camera.

  or would it be a thing of the system?

  I have a macbook pro and I use AE 15.3

  thanx

  Honey

  Thank you. problem solved. There was a small app called camtwist causing problems. I deleted the app so I could reset the default camera!

• Why by default fonts and color does not work after the upgrade to version 31?

  As mentioned on, my default fonts does not work. Any type of police that I've changed, he always showed the times I think that a new font Roman.
  pls help me thanks

  Problem solved. The character encoding for the outgoing is false, I change to the West. Then its ok now

• Number of features in the CONTAINER does not work

  Hi all
  I was working on a simple word processor for the local language using JTextPane and RTF. The program works fine in Netbeans. But the JAR file does not work. For example, the program should save on the hard drive but also to read the file. The JAR version does not work so that it works correctly in Netbeans. The JAR is created using Netbeans. Can you help me?
  
  Thank you.

  (1) we have no idea what class instance "editor" made reference.
  (2) always specify the character encoding when reading and writing the characters or you plan to use the encoding that may or may not support characters to work of characters by default. You can use OutputStreamWriter and InputStreamReader in order to be able to specify the character encoding. I suggest that you use "utf-8", given that it will work for all UNICODE characters.
  (3) your exception handling throws away most of the useful information. Most of the logging system to pass an exception without having to convert to a string.
  (4) Please use

   tags to make code readable.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
  

• Help! I've updated Firefox to version 20.0 on my Imac, and now UX does not work. What's wrong? What can I do about it?

  With the new version 20.0 UX does not work, how can I me personas to work?

  Make sure that you are not Firefox running in (permanent) private browsing mode.

  • https://support.Mozilla.org/KB/private+browsing
  • Firefox > Preferences > privacy > Firefox will be: "use the custom settings for history".
  • Uncheck the box: [] "always use the navigation mode private.

  If you switch to private browsing and then a special built-in character is applied to disable the theme so it is impossible to use other characters.

• Tab key does not work at the macro program

  Hello

  We have an in-house custom macro program that fills the fields in a web page displayed by Firefox.

  It is the window handle of the field with the circumflex, sends a string of WM_CHAR messages to fill it with text, sending a WM_CHAR message with a TAB character to change areas and repeat the above for the next field.

  This morning 15 Firefox updated itself, and now the program macro does not work. Specifically, Firefox is no longer changes fields form when it receives a tab character, and everything goes in the first field.

  No idea what happened?

  Better yet, there is a topic a chance: parameter of config to change to make it work again?

  Failing that, is it possible to revert to the previous version of Firefox 15?

  Thank you.

  Jack

  Good... ignore the above. It is a real problem with the update of Firefox 15, but a member of our staff has designed a work around for our macro program.

  See you soon.

  Jack