Charm: Smart profile: Face down to vibrate.

Similar Questions

• iPhone face-down detection

  I just got an iPhone s. 6, just a quick question. At work, I have my phone hidden under a couple of reason papers is not alllowed to text. I noticied that my phone lights when I get a text, but I can hear it vibrate. Because of the new face of the iPhone down detection? I know because I have previou had the iPhone 6 and kept under documents at work but I could tell the screen turned on when I received notifications.

  Hello jessk456,

  Thank you for using communities of Apple Support.

  Yes, if your screen is safe and its screen is not illuminated, then this is the detection likely face down, what's new in iOS 9.

  • Detection of face down to turn the screen off the power when you are not using it

  Download iOS 9.0 - 9.3.1 Information

  Take care.

• I dropped my iPhone face down on the concrete

  DDo, I have need of a new phone or can it be repaired? I dropped my iPhone 5, OS7.1.2, face-down on the concrete and now it does not illuminate screen is gray and cannot see all of the icons, as applications.

  Have you ever tried to force the reboot by holding down the button sleep and home for 10 seconds, until the return of the Apple logo again? You won't lose data.

  Next step after that would be to connect in recovery mode, as explained in this article:

  If your iPhone, iPad or iPod touch won't turn on - Apple Support

  If this does not work, you will get the phone repaired.

  Launch a service request

  Find an Apple authorized service provider

  Make an appointment at the Apple Store

• When sending faxes with 4215 all in one, he go face up or face down?

  When sending faxes with a HP officejet 4215 all-in-one, you put the pages you send face up or face down?

  You will need to place fax FACE up if you go the the top of the charger PAGE. On the glass, you need to get off the FACE.

• Sort of the research, New Check-in and Switch Profile drop downs in UCM

  Hello
  IHAC who would want to research, New Check-in and the Switch Profile drop down sorted by alphabetical order. Has anyone done this before for a client? Have you created a custom component or was there a configurable option available?
  
  Thanks in advance,
  Ananta Ahluwalia

  We just released an update today has 11g compatibility as well as backwards compatibility with 10g.

  http://corecontentonly.com/2011/09/29/alphabetizemenus-11g/

  Jonathan
  http://redstonecontentsolutions.com
  http://corecontentonly.com

• How to know the profile is changed on vibration mode in blackberry?

  Hello

  I'm tring an application where I take a label and a button.

  I want that when the user clicks this button 'Select profile' form of popup is opened.

  When the user selects the profile of vibration then the label must be set to 'Vibration On' & for other profile it is defined as 'Off Vibration'

  I tried it but that Label does not immideatly after having selected the profile.

  This is my code

  public final class MyScreen extends MainScreen
  {
      /**
       * Creates a new MyScreen object
       */
      LabelField lbl;
      ButtonField btnOk;
      public MyScreen()
      {
          // Set the displayed title of the screen
          setTitle("MyTitle");
          lbl=new LabelField("Set profile ");
          btnOk=new ButtonField("OK");
          btnOk.setChangeListener(new FieldChangeListener() {
  
              public void fieldChanged(Field field, int context) {
                  // TODO Auto-generated method stub
                  try {
                      ApplicationManager .getApplicationManager().launch("net_rim_bb_profiles_app");
                  } catch (ApplicationManagerException e) {
                      // TODO Auto-generated catch block
                      e.printStackTrace();
                  }
                  if(NotificationsManager.isVibrateOnly())
                  {
                      lbl.setText("Vibration on");
                  }
                  else
                  {
                      lbl.setText("Vibration Off");
                  }
  
              }
          });
          add(lbl);
          add(btnOk);
  
      }
  }
  

  Pleease please help me, since 1 week...

  Peter OK it works when I update the screen in OnExposed(). Now it works really well for me. SO happy

• Smart collection drop-down does not keywords

  I must have got this right once, because I have a smart collection whose only condition is a key word, which is at the top of the drop down to this collection.  Similarly, there is a collection of default Smart that LR must have created, called "without the keywords" and that one of the conditions is that keywords are empty.  However, whenever I try to create a new collection of smart, the criteria drop-down begins with side, followed by pick flag, color of the label, the label text, down to the final criteria, 'any searchable text' I understand unlike keywords, because there is a criterion called keywords.  It is true of attempts to change existing smart collections.  Where's my criterion by keywords?

  If you click on the drop down sides first or that you have the display you will see that the criteria were grouped into LR5. You will find keywords by selecting:

  Other metadata > keywords

• What does LC = CA = descent TM = descent LB = down TA = to top THE = face-down down

  I need to know what CA = TM = LB downhill descent LC = down = downwards from TA = to top THE = towards the bottom of stand for. They appear at the base of a sho int hssi out put

  SH int h5/1/0

  Hssi5/1/0 is down, line protocol is down

  The material is HSSI

  MTU 1500 bytes, BW 45045 Kbit, DLY 200 usec,

  reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation FRAME - RELAY IETF, crc 16, loopback not set

  KeepAlive set (10 sec)

  LMI enq sent 0, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down

  LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0

  LMI DLCI 1023 LMI type is DTE CISCO frame relay

  Broadcast queue 0/256, broadcasts sent/deleted 0/0, interface shows 0

  Last entry, never, never hang output

  Last clearing of "show interface" counters 1w3d

  Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

  Strategy of queues: fifo

  Output queue: 0/40 (size/max)

  5 minute input rate 0 bps, 0 packets/s

  5 minute output rate 0 bps, 0 packets/s

  0 packets input, 0 bytes, 0 no buffer

  Received 0 emissions (0 IP multicast)

  0 Runts, 0 giants, 0 shifters

  parity 0

  errors entry 0, 0 CRC, overgrown plot of 0, 0, 0 ignored, 0 abort

  exit 0 packets, 0 bytes, 0 underruns

  0 output errors, 0 appliques, 31172 interface resets

  output buffer, the output buffers 0 permuted 0 failures

  carrier transitions 0

  LC = down of CA = TM = LB downhill descent = to the bottom of TA = to top THE = worms down

  They focus on the signal stated on specific pins on the HSSI IIRC interface...

  LC = Loopback C

  CA = DCE available

  TM = Test Mode

  LB = Loopback B

  YOUR DTE = available

  THE - loop A

  TA emerged out. Logic to allow it to place even if the interface is down.

  HTH

  -Colin

• OfficeJet Pro 8600 print Face down

  OfficeJet Pro 8600 n911a 8 32-bit Windows

  It seems that if I print a single page with automatic duplex printing disabled, the printed page is put in the face of to the top output tray.  If I do the same with duplexing on (back long edges), the page is placed in reverse.

  Is this normal or preventable?

  Hello

  I don't know why your old printer make this but all 3 printers (from 3 providers) at home do the same thing and I can access dozens more by other sellers to work and they also do the same thing.

  Forward, thinking to print documents pages MULTI 2-sided, if all are facing upward, you must sort the documents by hand unless you print last page first.

  Kind regards.

• Whenever my Xperia Z3 (D6603) is spread face down on a surface, the screen stops like 5 seconds.

  The screen time-out is set to 2 minutes. What is happening in mode security also so it's a system problem? All this experience?

  It also happens with me, but don't worry cela an energy saving function. When the phone detects no movement at all for a few seconds it automatically put the phone to sleep. This will happen only if you put the phone backwards.

• AnyConnect with several profiles of connection and menu drop-down

  Hello world

  I configured anyconnect with two profiles of connection and group policies.

  Connection profiles and group policy have the same host name say xyz.com.

  need to know which configuration should I do so that when I connect it should show

  under option group choose the connection profile from the menu drop-down?

  Concerning

  Mahesh

  Mahesh,

  When you build the connection on the SAA profile there is a section in the Advanced section of "group Alias/group URL. Complete on the names you want and enable them. You should then see the two selections on the AnyConnect profile drop-down list.

  In the cli, it looks something like:

  tunnel-group Group1 webvpn-attributes
  enable-alias group Group1

  tunnel-group group2 webvpn-attributes
  Group-alias group2 enable

• IPhone SE no vibration with alarm

  Hi I double check all the settings and my phone alarm just don t vibrate. you have the same experience? What should I do?

  Hi Mishkino,

  Thank you for coming to us in the communities of Support from Apple. I know that I rely on vibration on my alarm to wake me up in the morning, so I will be happy to provide you with some resources to get it working again.

  In the clock app, you are able to handle vibrations for alarms that you have set up. Check out the following steps to see where to:

  1. Open the clock app
  2. Tap the alarm at the bottom
  3. Tap on edit in the top left corner
  4. Tap the alarm you want to edit
  5. His cock down
  6. Vibration of tap
  7. Choose the model of vibration you want to use for this alarm

  This will get your alarms works the way you expect again! See you soon.

• Re: Satellite L300-1DN - how to use recognition of face for login

  Hello

  I recently bought a new Toshiba Satellite L300-1DN and I want to use face recognition to connect.
  I registered my face with the usual set up, until the movement of the head and side by side in a fixed sofa downstaires.
  Now here or in any position other than this couch I can't connect without a fault which is very annoying!

  Because I thought that I would probably be more connect from my office in any case, I have re-made the installer, which worked.
  Over and over in the exact position even newspaper failure!

  Now, whenever I try to re setup my face etc, I am going through the whole process and it fails.
  I've done about 5 times now and make me very frustrated!

  I just want to know if theres any way to connect with different places and run the perfect set up?

  Thank you, Joe

  Hello

  Maybe I can help my friend.
  I searched here in the forum for useful discussions and forum it here:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=147434

  The user shaaaaan has reported this statement:
  To use smart Toshiba face recognition software:

  First of all,

  step 1. Although it cannot be configured or whatever it is, check the weather its already installed in your system, to do,

  1.a. open 'computer' from the 'Start' button
  1.b. Double click "C:" drive or every time your windows is installed, by default the C: drive.
  1.c. double-click "Program Files."
  1.d. double-click "TOSHIBA."
  1.e. weather check the folder named 'SmartFaceV' exists in this folder.
  1.f. If the file exists, this means that you have installed, s/w face recognition even if it is not configured to use, skip step 2 and GO to step 3.
  1.g. Else if the file did not exist, this means that the software is not installed, if it does GO to step 2.
  step 2. To install the software of face recognition

  2.a. open 'computer' from the 'Start' button
  2.b. Double click "C:" drive or every time your windows is installed, by default the C: drive.
  2.c. double-click "Toshiba."
  2.d. double-click "drivers."
  2.e. double-click "FaceRecognition.
  2.f. Double click on "setup" - one with an arrow going into an icon of sortoff loop.
  2.g. follow the procedure step by step for installation.

  step 3. To configure the software of face recognition

  3.a. open 'computer' from the 'Start' button
  3.b. Double click "C:" drive or every time your windows is installed, by default the C: drive.
  3.c. double-click "Program Files."
  3.d. double-click "TOSHIBA."
  3.e. double-click "SmartFaceV".
  3.f. double-click "SmartFaceVSettings".
  3.g. follow the prompts. A word of counsel is to ensure that your face is well lit when you use the software otherwise, you end up spending a day in front of the software trying to get it configures your face with the selected account.
  3.h. To sheck it simply lof out press the "Windows key" AND "key of L."
  3.i. Then you will see the normal login page, click on the "Other" credentials and on the next page, click on "Start Face Recognition" & "Smile" :))

  Check it!

• ActiveSync with the roaming profile

  I can't get Activesync to work with a roaming profile.  It seems he's trying to write a registry key with the synchronization information. If I install from connection to the field he works until I got close the session. So the next time I connect with the same Activesync profile must configure the back and then forgot the synchronization information. If I install it on a local profile with the admin rights it works find each time. But then I log in the field and I have the same problem.  I tried to install it in a different directory, but I have the same problem. It's like he attempts to write a registry key and then when the profile comes down from the server as it gets wiped out, or the registry is unable to write, but never gives an error message.  Whenever I log in, it acts as its new software. Is it possible to correct the problem.

  Hello

  I suggest you post the same question in the TechNet forum and check if it helps.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• 2.2 update can no longer silent phone if vibrator is activated

  Don't know if this is the case with just my phone, but now when I turn the volume all the way down, I can not 'silent' unless I have jump through the hoops to go into settings and turning vibrate, which means I have to jump through the hoops same do vibrate on the morning. Is what is happening to someone else and if so, did I miss something?

  I was annoyed by this as well... I liked having to turn down the volume down to vibrate-> silencer.  Now you either silent or vibrate... always.  It's not just you...

  and honestly... im not impressed with the 2.2 yet... maybe my mind will change as the days go by...