Chart "multiple".

Similar Questions

• Line chart multiple series shows the range of points.

  I have a 4 line chart series (using the Application Express 3.1.2.00.02 and Anychart 3.3). Data are based on a date range (x-axis). When I try to send back more than a month of a data value, it will only show points for a month (for example, the date range is 01/06/10 - 12/1/10 it will only display data for 6/1 - 7 / 1). Please let me know if you want more details.
  
  Any help is greatly appreciated.
  
  Edited by: cjmartin December 8, 2010 12:14

  Order what you have in your series on the chart lines maximum .

  Jeff

• Pie chart report syntax

  What is the correct syntax for a 'pie chart - multiple' report in Oracle SQL Developer? I am creating master-child where the master is a bar graph and report the child reports are (multiple) pie charts. The master report looks good, but I can't the child reports to display in the form of pie charts. The child statement correctly table view, but if I change the pie chart format, then I get the error message: 'data is zero or negative value and can not be displayed'.

  
  

  Here are the current request for reports of the child:

  SELECT the year, college_name, student_id, count (student_id) as count_ids

  DE registration

  WHERE college_name =: COLLEGE_NAME

  GROUP BY year, college_name, student_id

  ORDER BY year, college_name, student_id;

  This is the report of the child table:

  

  It's about what I want pie charts to look like:

  

  It works if you remove the name of college?

  I am able to make a graph to child multiple sectors out of a bar parent graph, without having to configure anything on the properties of the child report definition data

  

  Here's my child report query:

  Select the year, the team, sum (points) of hockey_stats

  where drive =: PLAYER

  Group of the year, the team

  order by year desc

  If you run your query, you have nulls, zeros or negative values for count (student_id)?

• Update of multiple charts simultaneously

  Hi, I have a VI containing graphs multiple (on a page of a control tab, to be precise) like these:

  

  Now, I would like when the VI starts to initialize all these graphics the same way:

  

  Basically, removing all the names of the plot and makes them all is not visible.

  Later, my VI runs, I want to fill every graph with relevant data and to decide on the number of plots in each graph, the names of plots etc. programatially.

  Now, it's OK to do as highest when there are some graphics, but I have some 16 of them and it's a real pain to add wires as in the screenshot above whenever I decide to add a chart in the front panel or if I decide that additional initialization is necessary.

  Is it possible somehow a loop? I have visialize some kind of loop passing through all the graphs belonging to some object of LabView and define somehow all of these properties, while maintaining the ability to reference each individual chart later in the program (by that name).

  Thanks in advance for your help.

  Create a table of references for each of these graphs.  Separate property notes using the graph and feed table of references to the loop.  Now, the loop will be autoindex on the table and setting the properties of each of these graphic references.

• export multiple charts for excel

  Hi guys,.

  I am trying to export multiple charts to an excel file but do not know how... I wanted it to appear on a file excel unique... and graphics export to a different sheet... can someone please tell me how to do?

  Kind regards

  Hello Gonçalo,

  Are you familiar with the report generation tool?

  http://zone.NI.com/DevZone/CDA/tut/p/ID/3178

• How to apply the Trace Bitmap function on multiple charts at the same time?

  Hi all!

  I is currently experiencing a difficult period for the application of the function of trace bitmap on multiple charts.

  It is as I have 101 graphic symbols in my library, retracing the one is so would take a lot of time, though, I created an order for the Trace Bitmap function, it takes time. While I was looking for a way to track all of them at once?

  -Thanks!

  This should do what you say you are willing to:

  var threshold = 100; // 0 - 500
  var minimumArea = 8; // 1 - 1000
  var curveFit = "normal"; // "pixels", "very tight", "tight", "normal", "smooth", "very smooth"
  var cornerThreshold = "normal"; // "many corners", "normal", "few corners"
  
  function main() {
      var i, type;
      var _dom = fl.getDocumentDOM();
      var _lib = _dom.library;
      var items = _lib.getSelectedItems();
      if (!items.length) return;
      for (i = 0; i < items.length; i++) {
          type = items[i].itemType;
          if (type == "graphic" || type == "movie clip") {
              _lib.editItem(items[i].name);
              _dom.selectAll();
              if (_dom.selection.length == 1 && _dom.selection[0].elementType == "instance" && _dom.selection[0].instanceType == "bitmap") {
                  _dom.traceBitmap(threshold, minimumArea, curveFit, cornerThreshold);
              }
          }
      }
      alert("Conversion complete!");
  }
  main();
  

  Copy and paste into a new text document and save it as tracebitmaps.jsfl. Select clips in the library to convert, then go to double click the JSFL file.

• Multiple series in a chart flash?

  How can I have multiple series in a flashchart?
  
  I am putting together a small application for a weight loss contest at the office and I have never used graphics in the apex before... With the help of the wizard that I seem to not get only one series. I want to have one for each competitor where the user can enter his weight daily and a (line 2D) graph that displays the progress of competitors in the same chart.
  
  Do I need a plugin for this licensed or is internal Summit graphic enough?
  
  Could someone give me a hint or point me to code or read it please?
  
  Thank you
  
  Andreas

  Hi Andreas
  You can add the series!
  See
  Region > graphic Flash
  under the "series of the chart," click the button "Add Series".
  GAson

• Multiple values per column in the stacked bar chart

  I want to use a bar chart stacked in a dashboard of the process, but I am wondering how I can add multiple values per column, because through the available methods, you can only add one value per column. I add some values to hardcode and I get the chart but, for example, I want to add series anocher in the table named 'Closed' and values for this in each column (January, February, etc.)
  
  Data source for filling
  result as a Fuego.Chart.DefaultXYDataSource
  result = Fuego.Chart.DefaultXYDataSource ("Opened");
  
  addValue result
  using
  value = 5,
  columnHeader = "January".
  
  addValue result
  using
  value = 10,
  columnHeader = "February".
  
  addValue result
  using
  value = 15,
  columnHeader = "March".
  
  addValue result
  using
  value = 7,
  columnHeader = "April".
  
  
  I enjoyed your collaboration if you have worked with graphics stacked bar.

  Hello

  You were very close.

  Try to use the Fuego.Chart.XYZDataSourceImpl object. This will give you the third dimension that your stacked bar chart needs and these attributes in the addValue method:

• value
  
• rowHeader (maybe that's where you set your month name)
  
• columnHeader (maybe it's where set it to 'Open' or 'Closed' in your example)

  Dan

• Multiple Excel sheets in a 2D chart

  Hello

  I want to read several sheets of an excel workbook and create a 2D data to create a chart containing all the data in the workbook. I can't get this to work, I tried things to connect the graph directly to the "Excel Get Data" to the construction of a table to be inserted into the new table, nothing seems to work. I hope someone here can help me. A screenshot is below to:

  

  
  

• by the way of multiple charts for sub vi

  Hello

  I'm rather new to labview and could use some advice.  My current project is using a loop for to create a chart for measurements of I to V of each sample of solar cells (each parcel is on a separate chart).  Multiplexing is externally via labview control.  I have a Subvi to show a sample report to the user before they are invited to save the report.

  What would be the best way to transmit graphics data for 6 (or more) a slot - VI and then recreate the graphics in the Subvi?  In my view, that a solution would be to use a shift to concate register bays of each series.  Unfortunately, the size of the array is determined by the user (number of test on the graph points) running, and I don't know if I can separate the data correctly in the Subvi.

  Another question would be to create an array of separate graphs (graph 1 element of table 1, etc.) using the group for each chart as an array element?  I ask this because it seems that data within the Subvi separation would be easier with this method.

  Thanks in advance for the help.

  Without seeing the rest of your code, you can use a table of references or simply a table of waveforms. If you data for charts is not under the waveform you can simply create the type of waveform data using the wave to build function. See example attached to the approach of references.

  pjr1121 wrote:
  Do you know an example that illustrates the implementation of clusters in a table?

  I don't understand what you're asking here. Are you referring to an array of clusters? On the front panel or on the diagram block as a constant or the block diagram with respect to the construction of an array of bunches per program. For the façade, just place a table control and then drag a control of cluster within the table. Then place the elements of the cluster within the element of the cluster. For a constant block diagram, it is the same approach. To build programmatically, use Bundle or the boot by name then build Array or replace a subset of table depending on whether you are a new array of construction or replacement of an array element.

  Did you have a LabVIEW tutorials? To learn more about LabVIEW, it is recommended that you go through the tutorials and look over the material in tutorials the NI Developer Zone Learning Center , which provides links to other materials and other. You can also take a course online for free.

• Multiple charts in a XML file

  I am creating a report XML Pub for PeopleSoft and must have 3 cards. I'm running into all sorts of problems and I think it's because my XML (more precisely the skills listed more than once). Here is my XML. I am trying to create a stacked bar chart.
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < root >
  < PLXSVGRAPH >
  < SKILL >
  Leadership of < COMPETENCY_NAME > < / COMPETENCY_NAME >
  < EMPLOYEE > 2.5 < / EMPLOYEE >
  < MANAGER > 2.7 < / MANAGER >
  < > 2.7 PEER < / PEER >
  < MATRIX_MANAGER > 2.7 < / MATRIX_MANAGER >
  < DIRECT_REPORT > 2.7 < / DIRECT_REPORT >
  < / SKILLS >
  < SKILL >
  Courage to < COMPETENCY_NAME > < / COMPETENCY_NAME >
  < EMPLOYEE > 2.5 < / EMPLOYEE >
  < MANAGER > 2.7 < / MANAGER >
  < > 2.7 PEER < / PEER >
  < MATRIX_MANAGER > 2.7 < / MATRIX_MANAGER >
  < DIRECT_REPORT > 2.7 < / DIRECT_REPORT >
  < / SKILLS >
  < / PLXSVGRAPH >
  < PLXSLCGRAPH >
  < SKILL >
  Leadership of < COMPETENCY_NAME > < / COMPETENCY_NAME >
  < EMPLOYEE > 2.5 < / EMPLOYEE >
  < MANAGER > 2.7 < / MANAGER >
  < > 2.7 PEER < / PEER >
  < MATRIX_MANAGER > 2.7 < / MATRIX_MANAGER >
  < DIRECT_REPORT > 2.7 < / DIRECT_REPORT >
  < / SKILLS >
  < SKILL >
  Courage to < COMPETENCY_NAME > < / COMPETENCY_NAME >
  < EMPLOYEE > 2.5 < / EMPLOYEE >
  < MANAGER > 2.7 < / MANAGER >
  < > 2.7 PEER < / PEER >
  < MATRIX_MANAGER > 2.7 < / MATRIX_MANAGER >
  < DIRECT_REPORT > 2.7 < / DIRECT_REPORT >
  < / SKILLS >
  < / PLXSLCGRAPH >
  < PLXSKJAGRAPH >
  < SKILL >
  Leadership of < COMPETENCY_NAME > < / COMPETENCY_NAME >
  < EMPLOYEE > 2.5 < / EMPLOYEE >
  < MANAGER > 2.7 < / MANAGER >
  < > 2.7 PEER < / PEER >
  < MATRIX_MANAGER > 2.7 < / MATRIX_MANAGER >
  < DIRECT_REPORT > 2.7 < / DIRECT_REPORT >
  < / SKILLS >
  < SKILL >
  Courage to < COMPETENCY_NAME > < / COMPETENCY_NAME >
  < EMPLOYEE > 2.5 < / EMPLOYEE >
  < MANAGER > 2.7 < / MANAGER >
  < > 2.7 PEER < / PEER >
  < MATRIX_MANAGER > 2.7 < / MATRIX_MANAGER >
  < DIRECT_REPORT > 2.7 < / DIRECT_REPORT >
  < / SKILLS >
  < / PLXSKJAGRAPH >
  < / root >
  
  Here is my XML table for just 1 chart:
  chart:
  < graph graphType = "BAR_VERT_CLUST" >
  < LegendArea visible = "true" automaticPlacement = "AP_NEVER" position = "LAP_RIGHT" / >
  < title text = "Plexus values" visible = "true" horizontalAlignment = "CENTER" / >
  < Y1ReferenceLine >
  < ReferenceLine index = "0" visible = "true" lineWidth = '2' text = 'Exceptional' value = '3' lineColor = "#ff00" / >
  < ReferenceLine index = "1" visible = "true" lineWidth = '2' text = 'Effective' value = '2' lineColor = "#ff00" / >
  < ReferenceLine index '2' = visible = "true" lineWidth = "2" text = "Need improvement" value = "1" lineColor = "#ff00" / > < / Y1ReferenceLine >
  < Y1Axis axisMinAutoScaled = "false" axisMinValue = "0.0" axisMaxAutoScaled = "false" axisMaxValue = "3.0" majorTickStepAutomatic = "false" majorTickStep = "0.2" / >
  < LocalGridData colCount = rowCount "{count (xdoxslt:group(.//PLXSVGRAPH, ' COMPETENCY/COMPETENCY_NAME'))}" = "5" >
  < RowLabels >
  Employee of < label > < / Label >
  Manager < label > < / Label >
  peer < label > < / Label >
  Matrix Manager < label > < / Label >
  Direct reports < label > < / Label >
  < / RowLabels >
  < ColLabels >
  < xsl: for each groupe-select=".//PLXSVGRAPH ' group by ' SKILL/COMPETENCY_NAME' = > '.
  < xsl: sort select = "COMPÉTENCE/COMPETENCY_NAME" / >
  < label > < xsl: value-of select = "current-group () / COMPETENCE/COMPETENCY_NAME" / > < / Label >
  < / xsl: for each group->
  < / ColLabels >
  < DataValues >
  < RowData >
  < xsl: for each groupe-select=".//PLXSVGRAPH ' group by ' SKILL/COMPETENCY_NAME' = > '.
  < xsl: sort select = "COMPÉTENCE/COMPETENCY_NAME" / >
  < cell >
  < xsl: value - of select = "sum (current - group () / COMPETENCY/EMPLOYEE)" / >
  < / cell >
  < / xsl: for each group->
  < / RowData >
  < RowData >
  < xsl: for each groupe-select=".//PLXSVGRAPH ' group by ' SKILL/COMPETENCY_NAME' = > '.
  < xsl: sort select = "COMPÉTENCE/COMPETENCY_NAME" / >
  < cell >
  < xsl: value - of select = "sum (current - group () / COMPETENCY/MANAGER)" / >
  < / cell >
  < / xsl: for each group->
  < / RowData >
  < RowData >
  < xsl: for each groupe-select=".//PLXSVGRAPH ' group by ' SKILL/COMPETENCY_NAME' = > '.
  < xsl: sort select = "COMPÉTENCE/COMPETENCY_NAME" / >
  < cell >
  < xsl: value - of select = "sum (current - group () / COMPETENCY/PEER)" / >
  < / cell >
  < / xsl: for each group->
  < / RowData >
  < RowData >
  < xsl: for each groupe-select=".//PLXSVGRAPH ' group by ' SKILL/COMPETENCY_NAME' = > '.
  < xsl: sort select = "COMPÉTENCE/COMPETENCY_NAME" / >
  < cell >
  < xsl: value - of select = "sum (current - group () / COMPETENCY/DIRECT_REPORT)" / >
  < / cell >
  < / xsl: for each group->
  < / RowData >
  < RowData >
  < xsl: for each groupe-select=".//PLXSVGRAPH ' group by ' SKILL/COMPETENCY_NAME' = > '.
  < xsl: sort select = "COMPÉTENCE/COMPETENCY_NAME" / >
  < cell >
  < xsl: value - of select = "sum (current - group () / COMPETENCY/MATRIX_MANAGER)" / >
  < / cell >
  < / xsl: for each group->
  < / RowData >
  < / DataValues >
  < / LocalGridData >
  < / chart >
  
  I get the following error and do not know what he tells me. Any thoughts?
  Real fonts: C:\Program Files\Oracle\XML editor Desktop\Template Builder for Word\fonts
  Run Start OPE
  SetLocale RTFProcessor: en - us
  FOProcessor setData: C:\Documents and Settings\steven.hart\Desktop\XML Publisher\PLEXUS_MRF.xml
  SetLocale FOProcessor: en - us
  java.lang.reflect.InvocationTargetException
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:586)
  at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:383)
  at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:201)
  at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:161)
  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1015)
  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:968)
  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:209)
  at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1561)
  at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:951)
  at RTF2PDF.runRTFto (RTF2PDF.java:626)
  at RTF2PDF.runXDO (RTF2PDF.java:460)
  at RTF2PDF.main (RTF2PDF.java:251)
  Caused by: java.lang.ArrayIndexOutOfBoundsException: 0
  at oracle.xdo.parser.v2.XSLForEachGroup.processGroups(XSLForEachGroup.java:462)
  at oracle.xdo.parser.v2.XSLForEachGroup.process01(XSLForEachGroup.java:282)
  at oracle.xdo.parser.v2.XSLForEachGroup.process(XSLForEachGroup.java:210)
  at oracle.xdo.parser.v2.XSLForEachGroup.processAction(XSLForEachGroup.java:94)
  at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
  at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
  at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
  at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
  at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
  at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
  at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
  at oracle.xdo.parser.v2.XSLVariable.getValue(XSLVariable.java:223)
  at oracle.xdo.parser.v2.XSLVariable.processAction(XSLVariable.java:117)
  at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
  at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
  at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
  at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
  at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
  at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
  at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
  at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
  at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
  at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
  at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
  at oracle.xdo.parser.v2.XSLTemplate.processAction(XSLTemplate.java:191)
  at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:508)
  at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:485)
  at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:264)
  at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:150)
  at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:187)
  ... 16 more

  Its so difficult to understand your condition, you do not give any description.

  But from the xml, I guessed that that's what you were trying to get.

  Let me know if it helps

  It worked for me :)

  chart: