Check disk every time you start

Similar Questions

• The disk check runs every time you start, but never completed

  Original title: Check Disk computer error... Need help please

  Hello

  my computer is unable to check the disk... I believe that my windows vista crashed and when I turn on my computer... it continues to try to check the disk, but it keeps going and it never ends.  Someone told me I could used a program of different control on different portable media disc such that a cd could solve this problem.

  What is the way to bet to find such a program? Microsoft expects to have a disk of audit program which can be downloaded, or can you recommend something else?

  Thank you very much for your time and help

  Hello

  Make sure that you have the correct CD/DVD as first in the boot order in the BIOS. Do not forget
  to set again when finished.

  Check with HP support.

  -----------------------------------------

  If this does not help, it looks like you have a hardware problem.

  If the drive has completely failed you "might" be able to recover your data.

  You can also save the data and re-install Windows 7. The hard drive can be put in another
  computer as a 2nd drive (the best) or in an external USB enclosure. Either allows you to copy data
  for removable media such as CD, DVD or other USB drives. Of course, there are professional
  recovery
  services which are usually expensive - check with your local computer store and HP (one who
  his own internal service and not of leeks and display a Best Buy or other stores).

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  I hope this helps.

• Messages of error and check disk every time I start my laptop

  When I start my phone first, I get an error message saying: "error loading C:\Users\Mandy\ntuser.dll". -What this means and how do I fix it? He also runs a scan whenever I start it by saying that one of the drives may have been damaged, and then it is said that it is correct.

  Hello

  1 during how long have you had the problem?
  2. don't you make changes to your computer before the problem?
  3. don't you want to disable check disk at startup?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Test the issue in safe mode.

  Step 2:

  If the problem does not occur in safe mode, I have you perform the clean boot in order to check if the problem is caused by a third-party program conflict.

  Note: Follow step 7 to your computer as usual.

  Step 3:

  This could also be a virus, run a full scan using your security software or by using the Microsoft Safety Scannerscanner.

  Step 4:

  You want to disable the disk check at the beginning upward, follow the steps in this link.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/how-to-disable-the-Chkdsk-check-disk-on-start-up/35f58c69-7a6c-4e1b-AEC3-26d7131ec643

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Pavilion dv2700 laptop displays the message "system CMOS checksum failed" every time you start

  

  Hi @all,

  I have a HP Pavilion dv2700 - kh933ea laptop computer #abv (it is a HP Pavilion dv2799ee Special Edition Entertainment Notebook PC to be exact) that displays the message "system CMOS checksum failed. Press F1 to continue"every time you start the system. My OS is Windows 7 / 32 bit.

  Then I updated my BIOS to version 2.4e, 01-dec-08 Phoenix (the SMBIOS version remained the same before 2.4), but the issue is not resolved. I have attached a screenshot for processor and BIOS versions.

  Can someone guide me on how to solve this problem?

  Thank you very much in advance.

  I don't see the screenshot of your post attachments. Please repost them.

  This error message means that WHAT BIOS is damaged. You will need to have the BIOS flashed in a mobile shop, repair a BIOS or an HP Service Center. Do a search online with Google or Bing repair for a BIOS.  If you keep trying to update the BIOS there will come a time where everything you have a black screen.

• Creative cloud forgets to reduce in the Systray every time you start

  Hello everone,

  After the update of the creative cloud (2.1.1.110 of course) it seems that every time you start Windows the creative cloud window appears in the foreground. The option 'Minimize to Systray' is always chosen, and even if I mark it and minimize the CC, after a reboot the window is still there. It seems that CC forget, that it should not pop up and minimize itself the silently in the systray (like any other program smoothly). Are there any suggestions how to fix this? The registry tweaks?

  Jens, try please upgrade to the latest version.

  1. remove the cloud creative app.

  Using creative cloud | Uninstall the creative cloud desktop application

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  2. install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• Every time you start, my 4 monitors rearrange their order - it is not included on the desktop

  Recently, I downloaded several updates to Windows Vista.  Among them have been updated for my NVIDIA GeFroce 6200 display THE and NVIDIA nForce Networking Controller.  Restarts, 2 of my 4 screens would not appear.  By checking Device Manager, there was a mistake with the controller who controlled the 2 monitors.  The failure of two attempts to restore to a previous download time.  Then I downloaded a driver for the controller by mistake and was able to resume all 4 screens.

  However, when the computer reboots, monitors have been rearranged in order on my desk and a remained dormant.  I can bring to the top of the screen 4 by extending to the desktop under display and, at the same time settings, change the location of my primary monitor.  However, I don't want to do it every time I start my computer.  Also, all my icons was reorganized.  Any ideas how I can stabilize my understanding of monitor on my desk?

  Hi Wandwinc,

  We faced such issues and others such as the screen resolution changes at each restart, some BSOD etc a few recent updates released by Nvidia for their graphics cards.

  I suggest you restore to an earlier version display driver and check what is happening.
  http://www.nvidia.com/object/notebook_driver_instructions.html

  If this helps you fix until the question, let not install, update the drivers from windows update as well, they are compeltely checked by Nvidia.
  I suggest contact you Nvidia if possible.
  http://www.nvidia.com/page/support.html

  Concerning
  Terminator

• (Legitimate) -Pop-up Windows every time you start Firefox

  So, lately every time I start Firefox, the new browsing session retrieves the pop-up windows during previous sessions (since the last time or even some of love it, three days ago), I long closed down. My boot option was always "show my windows and tabs from last time ' who used to do exactly this: pick up the tabs I had open or start with a new blank tab if I had opened. Now, however, whenever I open FIrefox I get different windows of previous sessions.
  The problem here is that this doesn't SEEM to be a malware issue because I don't get weird ad/questionable windows but "legitimate" pop ups I me remember I started personally is to say a photo or an image of a trusted site that opened in a new window or a help section on amazon.com , etc.
  This is a first and as you can imagine it has become very annoying. I use Firefox 25.0.1.
  Any ideas? Thank you!

  Hello waydown, maybe the files in your profile folder that contain session restroe data was corrupted - perhaps trying to remove them, so that they can get regenerated properly next time: go in firefox > help > troubleshooting information, click on file/show profile folder and close all firefox windows later. a windows Explorer window should open up - in there remove all files starting with sessionstore ...

• Why print alignment page every time you start?

  Recently, my printer HP (Photosmart C3180) started printing a page of alignment every time that I turn it on. This seems to be a cynical way for HP to sell more ink, because my printer has no alignment problem. The alignment page wasting my paper, waste a ton of ink I have to pay for and wasting my wait time to perform another task, deal with the sheet of waste and waste time more often when I have to buy ink. I searched through all the instructions and installed Help topics and find nothing that even talking about alignment each time you start.

  Hello

  Most probably the alignment page is printed on every reboot due the alignnment process is not entirely complete.

  Try to complete the alignment process by following the steps below:

  http://support.HP.com/us-en/document/c01336397

  Alignment must also contain black, yellow, Magenta and Cyan as the example below, any color missing due to the low or empty ink cartridge can cause the alignment to fail

  

• cocodede80070422 Wiondows 7 udate same error appears every time you start. Impossible to verify new updates. Followed to fix windows nothing helped.

  errorcodede80070422 Wiondows 7 udate even appears each time you start. Impossible to verify new updates. Followed to fix windows nothing helped.

  Hi Colin,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem you found error 80070422 when checking for Windows updates. This problem may occur if one or more of the following conditions are met:

  1. The Windows Update database is damaged.
  2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
  3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
  4. A required system file is incorrectly registered.

  I suggest you to try the steps below and see if it helps you to solve the problem.

  Method 1

  I suggest you to check if you are able to access Windows Update services and also make sure that the following services are started. If it is not started, follow the listed below as follows:

  a. press the Windows key + R, type "services.msc" (without the quotes) in the Run dialog box to start, and press enter.

  b. Locate the Windows Update service.

  c. right-click on the Windows Update service and select Properties.

  d. in Startup type, select enable.

  e. click Start under Service status.

  f. click OK.

  g. Repeat steps c to f for the following services :

  CSP & Background Intelligent Transfer Service.

  If these steps do not help to solve the problem, you can proceed to the step below and check.

  Method 2

  Step by step instructions for the fixed number.
   
  (a) press the Windows key + X , and then select (Admin) command prompt.
     
  (b) on the prompt window open copy and paste commands (all at once)
   
  net stop wuauserv

  net stop cryptSvc
   
  net stop bits

  net stop msiserver

  Ren SoftwareDistribution.old C:\Windows\SoftwareDistribution

  Ren C:\Windows\System32\catroot2 catroot2.old

  net start wuauserv

  net start cryptSvc

  net start bits

  net start msiserver

  (c) wait for the course to complete.
   
  (d) close the command prompt.

  Now, try to reinstall Windows updates and check if it helps.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Readers to check every time you start

  In my system now a days drive is checked at each start and restart the system.

  How to stop this check-up?

  Hi Dinesh.P,

  This occurs when the computer is turned off.

  The check disk tool, checks the errors and tries to fix any that it finds.

  Run the Windows recovery environment and run "chkdsk c:/r" to fix the file system and check the hard disk for errors. To run the chkdsk.exe tool, you must start Windows RE.

  To run the disk check, follow these steps:

  • Place the resource DVD disk drivers in the disk drive, and then start the computer.
  • Press a key when you are prompted.
  • Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  • Click on repair your computer.
  • Click the operating system you want to repair, and then click Next.
  • In the System Recovery Options dialog box, click command prompt.
  • Enter chkdsk.exe c:/r, and press ENTER.

  For more information see the link below:

  http://bit.LY/XAohi1

  In addition, run the diagnostics on the computer. Restart the computer now the FN key and the power to run the diagnostics.

  Waiting for your answer!

• Still crashes every time you start

  Hi there dear people,

  I just got a new computer system (double six cores, 4 GB graphics, 24 GB of ram) installed with a brand-new version of CS5 on it. Every component works fine so far, except... Yet. Sorry to say that still has been me bothering for the first version, but I guess it's just a problem of first-time this time.

  I start again, press 'OK' to create a new project, count to ten and BOOM the Win7 help dialog box appears suggesting to stop the program.

  Any ideas?

  Kind regards

  Tom

  Hello

  Try running again as an administrator and check whether work then you are having some permissions problems for. (Right click again and select run as administrator), make sure that all of your audio and video drivers are updated.

  You have installed the Master collection CS5 / Production Premium CS5 / first Pro CS5?

  Have you checked the updates?

• Firefox ask you useless master password every time you start

  When he started, Firefox asks unnecessarily my master password every time. My homepage (Google Finance) does not require a password. This occurs in SafeMode as well. It's annoying and time consuming. I X-out the main 10 seconds password request window after I start Firefox. Why would he do that? ... Firefox not used to do this.

  You use Sync?

  The synchronization used in Firefox 34 version then use password manager to store the name (e-mail) and password to use to connect to the synchronization server.

  Earlier versions of Firefox used to store these data in the signedInUser.json file in the profile folder, but the current version only stores the sessionToken in this folder and need the password for the password manager.

• Since the 8.0.1 update every time you start Firefox POPs a box asking if I want to install Java Quick Starter 1.0. I say always Yes, but the next time he asks me the same question. Why?

  I thought once you allowed a plug being installed and authorized in Firefox it stay installed. Why should I allow it every time? I don't know what made the extension.

  Go to the Control Panel, double-click Java. In the Java Control Panel, select the Advanced tab the + various front and uncheck the box Java Quick Starter to remove the add-on. Restart firefox.

  Thank you

• InDesign CC hangs every time you start

  Hi, Indesign CC crashes each time it starts. I tried everything in the forums. I followed the instructions on this page http://helpx.adobe.com/indesign/kb/indesign-cc-crashing-launch.html and nothing works.

  Mac 10.8.4, Mac Air, 8 GB ram.

  I uninstalled and reinstalled 3 times.
  I disconnected, rebooted and logged into CC several times.

  I even removed the virtual machine and related software.

  I can't think of anything to try.

  Can someone please? Thank you.

  Here is the part of the error report...

  Process:	Adobe InDesign CC [227]
  Path:	/ CC/applications/Adobe / * / Adobe InDesign InDesign CC.app/Contents/MacOS/Adobe CC
  Identifier:	com.adobe.InDesign
  Version:	9.0.0.244 (9000)
  Code type:	X 86-64 (native)

  Parent process: launchd [152]

  ID of the user:

  501

  Date/time:	2013-07-11 21:34:04.934 + 1000
  OS version:	Mac OS X 10.8.4 (12E55)

  Report Version: 10

  Interval since last report:	1611 sec
  Crashes since last report:	5

  Per-App interval since last report: 57sec

  Per-App crashes since last report: 5

  Anonymous UUID:

  6C2B2779-3D36-C835-F2EF-48FD7255913D

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x00000000a5ef1878

  VM regions near 0xa5ef1878:

  ->

  __TEXT

  0000000100000000-0000000100006000 [24 K] r-x/rwx SM = COW/Applications/Adobe CC / * / Adobe InDesign InDesign CC.app/Contents/MacOS/Adobe CC

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  0 libsystem_c.dylib		0x00007fff90e70b73 memmove$ VARIANT$ sse42 + 331
  1 com.adobe.BIBUtils		0x00000001022238f5 0x10221d000 + 26869
  2 com.adobe.BIBUtils		0x00000001022284e8 0x10221d000 + 46312
  3 com.adobe.BIBUtils		0x0000000102226c19 0x10221d000 + 39961
  4 com.adobe.PDFSettings		0x0000000112e64583 0x112e5d000 + 30083
  5 com.adobe.PDFSettings		0x0000000112e6cd6e PDFSettingsInitialize + 32382
  6 com.adobe.PDFSettings		0x0000000112e6d39c PDFSettingsInitialize + 33964
  7 com.adobe.PDFSettings

  
  0x0000000112e6d67e PDFSettingsInitialize + 347028 com.adobe.PDFSettings
  0x0000000112e6d38d PDFSettingsInitialize + 339499 com.adobe.PDFSettings
  0x0000000112e6ae52 PDFSettingsInitialize + 2441810 com.adobe.PDFSettings
  0x0000000112e6b1b4 PDFSettingsInitialize + 2528411 com.adobe.PDFSettings
  0x0000000112e5e86b 0x112e5d000 + 625112 com.adobe.PDFSettings
  0x0000000112e644c4 0x112e5d000 + 2989213 com.adobe.PDFSettings
  0x0000000112e64d1d 0x112e5d000 + 3202914 com.adobe.PDFSettings
  0x0000000112e60945 0x112e5d000 + 1466115 com.adobe.InDesign.PDF
  0x0000000112a22c19 0x1129d9000 + 30210516 com.adobe.InDesign.PDF
  0x0000000112b02274 0x1129d9000 + 121714017 com.adobe.InDesign.PDF
  0x0000000112b01035 0x1129d9000 + 121246918 PublicLib.dylib
  0x00000001010d4481 Command::DoImmediate (short) + 3319 com.adobe.InDesign.Utilities0x0000000115c3347c 0x115c32000 + 524420 com.adobe.InDesign.Utilities0x0000000115c33605 0x115c32000 + 563721 com.adobe.InDesign.AppFramework0x000000010ec2c26f 0x10ec21000 + 4567922 com.adobe.InDesign.AppFramework0x000000010ec2a94a 0x10ec21000 + 3924223 com.adobe.InDesign.Application UI0x000000010ef6b2b6 0x10ee39000 + 125407024 com.adobe.InDesign.Application UI0x000000010ef6c032 0x10ee39000 + 125752225 com.apple.AppKit
  0x00007fff957ad21a-[NSApplication run] + 63626 com.adobe.exo.framework
  0x00000001028a7e98 exo::app::OS_AppBase::RunEventLoop() + 5627 com.adobe.InDesign.AppFramework0x000000010ed2eff3 0x10ec21000 + 110590728 com.adobe.InDesign.AppFramework0x000000010ed2e182 0x10ec21000 + 110221029 com.adobe.InDesign
  main 0x0000000100001dbc + 412com.adobe.InDesign 30
  0x0000000100001bb4 start + 52

  Thread 1: dispatch queue: com.apple.libdispatch - Manager

  0 libsystem_kernel.dylib		0x00007fff8bd87d16 kevent + 10
  1 libdispatch.dylib		0x00007fff94b0fdea _dispatch_mgr_invoke + 883
  2 libdispatch.dylib		0x00007fff94b0f9ee _dispatch_mgr_thread + 54

  ... more

  My Mac is finally working properly with CC - but with a very helpful person of Apple, not Adobe.

  Because I didn't know what else to do, I went to our local Apple store today to get my checked MacAir and make sure that it wasn't a problem to Apple Mac. After an hour of trial, they discovered it was certainly a problem of Adobe and is NOT a Mac problem. Even uninstalling and installing twice in front of me Adobe CC returned to the top with errors. We ended up removing everything related to CC, including removing all preferences of old Adobe Adobe programs, as well as currentsand start again. Then CC arises with a new Application message handler and made me install before giving me a message that Indesign errors and uninstall again while I was at Apple. What I did. Then I went home to complete the installation. I ended up just now to reinstall all the programs CC I use for the 5th time with this new CC Application Manager and everything works now.

  There was something really wrong in the file "Adobe", but whether the Application Manager, or no, I don't know.

  I have nothing but praise for aid Apple staff gave me beyond the normal and wish Adobe could give the same kind of services. (I can't possibly go back to Apple with this problem.) I phoned and recorded my problem with CC with Adobe After days of my own tests on July 11. It's now July 16 and I got an email tonight asking me to designate a time for them to contact me. It's too late. I can't work like this solo. If I can't work, I cannot be paid and losing customers. I really thought that CC was supposed to be the best and I got Adobe products for so long I lost count of the years.

  In any case, my CC works now.