Check if interaction checkbox was clicked

Similar Questions

• Error NET HELPMSG 3521 while checking the Update Service was stopped and the error code "8024000".

  Original title: error NET HELPMSG 3521 while checking the Update Service was stopped.

  Windows Vista. 32-bit, SP1 and 2

  Long story short, I tried to fix my problem of update windows since the beginning of July 2011.  My computer does not stop when you install updates automatically or manually.  I got a 8024000 error.  A shot an email to Ms support and I received an email quickly with some procedures to do.  I don't have to make these 4 days later.  Here is the part of the email.

  This problem may be caused by the following factors:

  1. the Windows Update service has stopped.

  2 corrupt Windows Update temporary files.

  3. bad Internet connection settings.

  4 corrupted DLL files.

  Step 1: Check the services concerned of the update of Windows

  1. click on the button 'Start' in the 'Search' bar type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. double-click on the service "Windows Update".

  3. click on the 'general' tab. Make sure the "Startup Type" is "Automatic" or "manual". Then please click the button "Start" under "Status of Service" to start the service.

  4. repeat the above steps with the Background Intelligent Transfer Service (BITS).

  I completed this step.

  Step 2: Rename the folder C:\Windows\SoftwareDistribution Windows Update

  1. close all open windows.

  2. click on the "Start" button, click "All programs" and click on "Accessories".

  3. right click on "Command prompt" and click "run as Administrator".

  4. in the window "Administrator: command prompt", type "net stop WuAuServ" (without the quotes) and press ENTER.

  Make sure it is said that he has been arrested with success.  OK, it worked.

  5. click on the button 'Start' in the 'Search' box type "%windir%" (without the quotes) and press ENTER.

  6. in the opened folder, find the folder named "C:\Windows\SoftwareDistribution".

  7. right click on the folder, select Rename, and type "SDold" (without the quotes) to rename this folder.

  8. while still in the window "Administrator: command prompt", type the command "net start WuAuServ" (without the quotes) in the window to restart the service Windows updates

  It did not work.  I received a message...

  The syntax of the command is

  NET [accounts: computer: config: continue: file: Group: help: helpmsg: localgroup: pause: print: session: share: start: statistics: stop: time: use: user: view]

  C:\Windows\System32>_

  I tried again from the beginning and now get the following error: NET HELPMSG 3521

  "MS supports has not returned my emails to the technology or the Manager.

  Can someone help me?  Please notify.  Suzzz-Q

  There are many other measures that followed the foregoing.  If anyone is interested in reading all of this...

  Step 3: Component of Windows Update registry

  ============================

  1. click on the "Start" button, click "All programs" and click on "Accessories".

  2. right click on "Command prompt" and click "run as Administrator". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Enter the following command and press ENTER.

  REGSVR32 WUAUENG. DLL

  You will get a window "DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  4. then please proceed to enter the following commands one by one. A success notification is received after each command.

  REGSVR32 WUAPI. DLL

  REGSVR32 ATL. DLL

  REGSVR32 WUCLTUX. DLL

  REGSVR32 STINKS. DLL

  REGSVR32 WUPS2. DLL

  REGSVR32 WUWEBV. DLL

  If please test the issue again and let me know the result. If the problem persists, I'll help you check your Internet connection in our next communication. To clarify the issue and provide more specific troubleshooting steps, please help me to collect the following information.

  How to capture a screenshot

  ======================

  1. press the button print screen (print screen) on your keyboard.

  2. click on the "Start" button, type "mspaint" in the search bar and press ENTER.

  3. in the Paint program, click on the "Edit" menu, click "Paste". Click on the "File" menu, and then click "Save".

  4. the dialog box "Save as" appears. Type a file name in the "filename:" box, for example: "screenshot".

  5. make sure that "JPEG (*.)" JPG; *. JPEG; *. JPE; *. JFIF)"is selected in the box"Save as type", click on"Desktop"in the left pane and then click on"Save ".

  Please send this JPEG file to my e-mail account to * address email is removed from the privacy *.

  How to retrieve system information

  =============================

  System information can provide us with more information about the current state of the system. I would check for you. Please send it to me using the following steps:

  1. click on the "Start" button, type "MSINFO32" in the search bar and press ENTER to start System Information.

  2. on the pop-up window, in the menu bar, click on 'File' and click on 'Save', type a file name and choose NFO as "Save as type", click on "Desktop" in the left pane and click Save.

  Please send it as an attachment to * address email is removed from the privacy *. If the file is too large to be sent, please right-click on the exported file, choose "send to"-> "Compressed file (zipped)" and then send the zip file for * address email is removed from the privacy * for further research.

  How to recover the WindowsUpdate.log file

  ================================

  1. click on the "Start" button, type "WindowsUpdate.log" (without the quotes) in the search bar and press ENTER. We will see a file named "WindowsUpdate.log".

  2. now click on the 'File' menu and click on the "save under".

  3. in the left pane, click "Desktop" and click the "Save" button.

  Hello

  Instead of all of the previous steps, you can just try the steps as shown in these methods and check if these help.

  Method 1:

  To resolve the error 8024000 follow the steps in the link and check if it helps.

  Windows Update error 8024000

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-8024000B

  Method 2:

  See also article on the resolution of the problems with the installation of updates and check if this may help:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Accidentally that hidden/removed the base Panel (the one with the shadows, made highlights, contrast, exposure) to develop module. I was clicking on the exposure slider when my mouse slipped and I clicked on something. How to do back panel?

  Accidentally that hidden/removed the base Panel (the one with the shadows, made highlights, contrast, exposure) to develop module. I was clicking on the exposure slider when my mouse slipped and I clicked on something. How to do back panel?

  Make a right-click on any other Panel name develop. In the menu that appears, put a check mark next to the base.

• check failed. There was an error connecting to server Apple ID.

  check failed. There was an error connecting to server Apple ID.

  What do you do when you receive this alert?

• What is the best way to check if the trigger was held

  What is the fastest way to check if the trigger was held. Right now, the only way I can think is to query the number of samples acquired on the AI channel (which is triggered). Is there a faster way? Is there a property node (that I can't find) that returns TRUE/FALSE?

  Thank you

  Can you elaborate a bit more? What type of trip (I guess a start trigger)? What equipment? What do you mean by 'faster '?

  There is no property to "has a start trigger has occurred." If you want to find if a start trigger has occurred, you can he deduct the number of samples. There are several approaches you can take:

  * DAQmx Read will hang until a timeout is hit or up to the number of samples you request is read. You could do a DAQmx Read with a timeout-infinity (1), playback of a single sample.

  * Well, you could ask about properties DAQmx Read TotalSampPerChanAcquired or AvailSampPerChan; Once they no longer means 0, while this NEITHER-DAQmx started buffering data internally, which means that the material received the trigger.

  * If you use a digital border start trigger and according to your material, then you may be able to use the detection of changes in a separate task, but I don't know if it would be significantly faster then the other two approaches.

• Determine which cluster and the array index element was clicked on table clusters

  Hello

  I'm overload of brain with dynamic events and references and nodes of property etc.

  I am trying to identify the cluster and the array index element that was clicked on table clusters

  This gives me the name of the element:

  

  Is this reasonable?  How can I get the index?

  Thank you

  Paul

  Hello

  Download the VI in this link (also attached).  It gives you the index of the array element that you clicked. Hope this will help you.

  Kind regards
  Nitz

  (Bravo to give good answers, mark it as a Solution If your problem is resolved)

• When checking my email (Hotmail) I click to open the mail, and it redirects me to the homepage of hotmail? Only on the desktop?

  When checking my email (Hotmail) I click to open the mail, and it redirects me to the homepage of hotmail? Only on the desktop?

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• You can use actionscript to detect if an icon was clicked in your Flash Web site?

  I want to make my icons lights or vibrating, if they were clicked.  If the viewer clicks on the icon, they watch a video clip and then be returned to the main screen with icons of palpitation.  Is it possible for Flash detect if this icon was clicked when they clicked on the icon to return to the main screen can stop throbbing?

  ?  I am sure that it is not possible with the timeline.  Any help would be appreciated as always

  This configuration is problematic.  use a swf file of a frame that contains your movieclips icon only.  assign the icon movieclips instance like icon1_mc, icon2_mc etc. names.  Add a flvplayback in your library component.

  You can then use:

  var flv_pb:FLVPlayBack = new FLVPlayBack();

  flv_pb.addEventListener (Event.Complete, completeF);

  function completeF(e:Event):void {}

  removeChild (flv_pb);

  }

  var gf: GlowFilter = new GlowFilter();

  var previouslyClickedIcon:MovieClip;

  var iconA:Array = [icon1_mc, icon2_mc, etc...];

  var flvA:Array = ['flv associated with icon1.flv', 'icon2.flv', etc...];

  for (var i: int = 0; i<>

  iconA [i] .addEventListener (MouseEvent.CLICK, clickF);

  }

  function clickF(e:MouseEvent):void {}

  {if (previouslyClickedIcon)}

  [from = previouselyClickedIcon.filters];

  }

  MovieClip (e.currentTarget) .filters = [gf];

  addChild (flv_pb);

  position flv_pb

  flv_pb.source = flvA [iconA.indexOf (e.currentTarget)];

  }

• How can I check the patch I was asking?

  Hi all:
  How can I check the patch I was apply to financial management? Did check on the server? or SQL for the query?
  
  
  
  
  Concerning
  Terry

  Terry,

  Run this query:

  SQL> select *
  from ad_bugs
  where bug_number = '';
  

  You can also search for OAM by the patch number.

  Kind regards
  Hussein

• a pop up has informed me of a firefox update at a time when I couldn't do it. later, I clicked on browser &gt; help &gt; about firefox &gt; check for updates and was informed mine to date...? Is there another way to check?

  I tried to copy the url of origin of the first window for can jump the debates when I was clear to do, but unfortunately it isn't copy-able.

  The update:

  • Click (in Firefox) help > about Firefox > check updates
    • It downloads / installs the incremental update, so that you do not need to download the installation program complete, largest in the link below and is fully automatic
  • Download, SAVE to the desktop, close Firefox, and then click the file downloaded to install/update:
    • Current version: https://www.mozilla.org/en-US/firefox/all.html
    • The previous version is supported (currently 3.6.24; soon): https://www.mozilla.org/en-US/firefox/all-older.html

  See: http://support.mozilla.com/en-US/kb/Installing+Firefox

• How to check the Boolean checkbox

  HII.
  I jdev 11.1.1.3.i have one table.in that I have active column which is a box.on check Boolean loading of the page it will show all active lines in the active table IE = 'y '.
  I have a show all the also.in check that clicking on it will show all active and inactive rows in the table.
  I have an add, remove emissions and also of the button Save page.
  I want to add a row.on clicking the add a line button is coming.it has the active field as unchecked.on adding the line itself, I want the Boolean to be checked.i active box cannot give the value selected to be true in the property inspector, because if I give by clicking Show all also, it will be checked.how I can do that in any other way.on adding a line to the active to check field?

  Your state of the checkbox depends on a line attribute (active), init you attribute to 'Y' and it should show only checked box.

  Timo

• Check whether the checkbox in a form is activated or not using javascript

  When you click a checkbox (TBD) it must set the value of a field with a default value "1234". If uncheck us the box, it must set the field to null.
  I set the box as STATIC2:; 1234 in the form.
  
  I used the event onClick on the box and calls a function to update the column.
  Inside the function I check if the box is checked using
  If (document.getElementById('P4_TBD').checked = true)
  {
  document.getElementById('P4_COL1).value = '1234';
  }
  on the other
  {
  document.getElementById('P4_COL1).value = "; / * or $s ("P4_COL1", "");
  
  }
  
  It works only when the box is checked. If the checkbox is unchecked is not setting the field to null.
  I checked document.getElementById('P4_TBD').checked = false instead of the else clause. It does not work.
  Please help me on this issue.
  
  Thank you
  Ravi

  When you use the check box or option button, your button ID is using an index. If you create a group of 3 check with ID = "MY_CHECKBOXES" boxes, APEX will create the following ID for each of your options: MY_CHECKBOXES_0, MY_CHECKBOXES_1 and MY_CHECKBOXES_2. If you want to test if the first checkboxe is checked, you will use document.getElementById('MY_CHECKBOXES_0').checked.

  I didn't test a single checkbox, but I would expect your check to be "TDB_0" not "BDM" which is the frame that surrounds your checkbox group.

• Read report interactive checkbox on submit

  NEWBIE QUESTION: How can you determine which line in an interactive report checkbox is enabled on a button the process?

  Hello

  This post might help
  Re: Need help with APEX_Collection

  Use Ajax to store the lines checked to collection

  Kind regards
  Jari

• Tree with hierarchical function to check/uncheck the checkbox

  Hello
  
  I build a tree with checkbox APEX 3.2 feature
  
  My query tree looks like
  Select "SERVICE_ID' id
  "PARENT_ID" pid
  , The name of 'service_name '.
  connection null
  APEX_ITEM. CheckBox(1,SERVICE_ID) a1
  null a2
  of ' #OWNER # '. " SERVICES_TEST ".
  Start with "SERVICE_ID" =: P9_TREE_ROOT
  connect prior "SERVICE_ID" = "PARENT_ID".
  
  So far so good. The tree displays correctly
  
  Now my requirement is check_all_child/uncheck_all_child when the parent is checked/unchecked.
  
  Let's take an example like
  
  ROOT
  -SERVICE1
  -SERVICE1_CHILD1
  -SERVICE1_CHILD2
  -SERVICE2
  -SERVICE2_CHILD1
  -SERVICE3
  
  If SERVICE1 is checked, then SERVICE1_CHILD1 and SERVICE1_CHILD2 must be verified.
  
  Could someone help me please on how to do it?
  I can write a function onchange against the box, but I need to check/uncheck hierarchically and the hierarchy is dynamic.
  
  Please let me know if any other information is required.

  Amri,
  Try the following

  $('[name=f01]').click( function() {
    this_checked = this.checked;
    this_row = $(this).parents('tr:first');
    this_level = this_row.children('td').size();
    next_row = this_row.next();
    /* Loop through next rows and use the no: of columns to identify children */
    while ( next_row && ( next_row.children('td').size() > this_level) )
    {
     next_row.find('[name=f01]').attr('checked', this_checked );
     next_row = next_row.next();
    }
  })
  

  I tested it only on the code of html Tree you posted earlier

• (This plugin is vulnerable and should be updated check updates... Click here to activate the adobe acrobat plugin)

  Hello
  When I connect to the Internet banking and payments and I try and print the certificate of payment and download any payments that above is the error, it continues to give me, but it makes working a few
  I've updated everything that needed to be updated and nothing does. Still having the same problem and don't know what I can do about it?

  Its java plugin problem, update your Java plugin
  
  Check for Upto date plugin

  • https://www.Mozilla.org/en-us/pluginCheck/
  • http://blog.Mozilla.org/security/2012/08/28/protecting-users-against-Java-security-vulnerability/
  • https://support.Mozilla.org/en-us/KB/update-and-unblock-Java
  • http://blog.Mozilla.org/security/2012/10/11/click-to-play-plugins-blocklist-style/