Determine which cluster and the array index element was clicked on table clusters

Similar Questions

• I looked under system restore points and the earlier it had was on March 27, which was still after that I got problems

  Good so my computer has some corrupted files... I looked under the system (Yes, including the section 5 days ago) restore points, and the earlier it had was on March 27, which was still after that I got problems... I want a later date... Help, please.

  Hello

  If there is no previous restore points until 27 March, including even more that 5 days more then they just do not exist

  and you can not do something which

  Follow these steps instead:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Can I call a function using the array index?

  I defined a table that stores the name of the function, like this:

  var aresetButtonTop:Array = new Array(resetTop1,resetTop2,resetTop3,resetTop4,resetTop5);

  Then I have a button named "btnresetTop" which, once clicked will be called one of the five functions stored in the array (aresetButtonTop) above. Functions are called at runtime depending on certain conditions. I need to figure out how I can call these functions using the array index. I use the following code to call the function. The value of i has already been calculated.

  
  

  btnresetTop.addEventListener (MouseEvent.CLICK, aresetButtonTop [i]);

  After doing this, I get the following error when I click on the button:

  TypeError: Error #2007: parameter listener must be non-null.
  at flash.events::EventDispatcher/addEventListener()
  at gallerytest_fla::MainTimeline/thumbTopClick()

  Note: thumbTopClick() is a function within which all these codes are written.

  I need to know if it is posible in AS3 to call a function name using array index or not. If so, could you afford ehelp me out.

  You can certainly do.

  In your case, it looks like i is out of range. Show your loop.

• SAMSUNG RV510 laptop computer and the built-in webcam was working before and now, if I have the webcam the screen is in night vision which is entirely green.

  I have a SAMSUNG RV510 laptop and the built-in webcam was working before and now, if I have the webcam the screen is in night vision which is entirely green. I tried to restore and re - install the drivers and even removed the chip back and webcam is plugged in but nothing works.
  Please give me a solution for this.
  Thank you

  See its unlikely a MS or Win, Samsung help/support solution or their forums, its their equipment and their program

• In the latest version of MF, there is a missing button, who was in the previous version: between backward/forward buttons and the bar hits there was little flash, who showed a few recent pages I just went through. How can I restore it?

  In the latest version of MF, there is a missing button, who was in the previous version: between backward/forward buttons and the bar hits there was little flash, who showed a few recent pages I just went through. How can I restore it?

  If you mean the drop marker so you can always get history buttons front and rear, if necessary by left clicking and for a second, or by right-clicking on them.

  If you want to continue the brand drop there too there is that Extension to https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/

  Also the abbreviation for Firefox is Fx

• Was a backup, and the only file created was mediaID.bin.

  Title of the Moose: I ran a backup and the only file created was mediaID.bin.  That all my personal files, but also the backup system files contain?

  I am running Win 7.  I chose to let Windows choose the files, but I thought he said that personal folders could be saved.  Not sure if.  If this .bin file contains everything, I can choose just to restore personal files from it?  I am naïve.

  I saved on a flash drive.  When the backup finished the only file in the Explorer was mediaid.bin, but when I reinserted the drive he showed several zip files and those that do not contain my personal backups, so all is well!  Sorry for the problems with my idiocy!

• Use of the cluster and the self-supply

  I move to a cloud with VCAC for self-supply infrastructure. How will this affect my use target for my HA cluster?  Previously, I was aiming for running each cluster to 80% usage of the maximum RAM and CPU on each host for average use.  now, I propose to allow vms to be implemented stand-alone service.  I can't control the procurement process but various customers and tenants can size the VMs at will without my notice.  Accordingly, I must be able to have available capacity more quickly to add virtual machines and not suddenly short of ability to cluster.  I want to minimize waste by running my pile of ability, but I also need to maximize the elasticity.  What are some guidelines on how to do it?  Anyone has experiences to share-

  1. What did you choose as a target of use and why?

  2. How do you plan ability / projected ability to cluster?

  3. have you used the admission control?

  Looks like a cool project. Don't forget that from a point of view infrastructure HA and admission control are still trying to solve the same problem, recover VMS to a host or an operating system failure as soon as possible.

  For example, if your new cluster includes 20 guests and you want to be able to have a host in maintenance mode and still suffer a failure of the host and you have decided to use the % based admission control strategy (this is the default recommendation, I recommend evaluate you your environment and determine if this is the right option for you) , you'll want to put the % to 10%. This will ensure that your cluster has sufficient resources to restart all running VMs. keep in mind that unless VMs come reservations, HA reserve capacity to start the virtual machine, there no performance guarantee.

  In respect to your use of target, which depends on the SLA that you provide and your risk tolerance.

  The last customer, I worked for responses was:

  1. we have reserved the capacity in a cluster such that we could have a host in maintenance mode and still lose a host and have no VMs know performance degradation

  2 vCOps

  3. Yes

• Is it possible to determine which parts of the runtime of the BCI are required?

  Recently, I added a few .NET controllers to allow me to use c# written by third-party DLLs.

  A few years ago, due a number of reasons, rather that runtime CVI together with our shipping software, we have stripped the small pieces that were needed to make the software run, which kept the overall size of the package down. Given the size of the complete engine (134MB) and the fact that we probably use very little of it, I'm reluctant to add, given the fact that the package occupies only around 10-12 MB.

  I discovered yesterday that the latest version of our software does not work on machines other than my development machine - either're missing us now stuff CVI.

  You might wonder why I do not use the distribution manager to build. In other words, due to the law American that we are prohibited from any form of encryption beyond a certain level as part of a software project we produce, and the installer at the moment entered in this category.

  So that's my dilemma. My questions are...

  (1) is it possible to determine what might be missing by the simple knowledge that the addition of .NET controllers caused the problem.

  (2) if I use the distribution manager to make a working copy of the software, would it not straight to the before enough to then identify what additional things other than my own code, has been added to make the software work and if so where is the installer put it. I have the impression that something gets stuck in Windows\System32, but are there other places too?

  I hope you can help

  Concerning

  Gavin Summers

  You have been really helpful guys... I'm sorted now... The problem arose mainly because I have 9 upgrade to 2010 and then 2010 SP1 for this project. I already had a local copy of the CVI. Reflector.dll in my (9.0.248) project, or something similar, so that was the cause of the problem, but because I just started testing on machines other than my development machine, I haven't noticed so far.

  I went looking for the new copy of this file, when we moved to 2010 SP1, but found no one. I didn't realize he was locked up in the House - I think he could be in the system32 directory before. I have now managed to get a copy from there and when included in the installer, the project is now working on other machines.

  As I said before that the situation is far from the idea, saw out the locks take out the execution engine of the CVI, but because of the way we ship software and due to the restrictions that are imposed by the U.S. Government on issues of encryption, full runtime is now too big to ship with the software , and we cannot use the MSI installer as its encryption level at least at the last valuation was too high.

• How can I determine which applications and processes are turned on at first upward and how can I keep their autostart?

  My office of gateway using Windows XP takes a long time to start.  I hear a lot of activity because it starts and after a very long time, I can really use it.  I would like to know what process or applications start automatically and then determine which ones to move away and how.

  If you were to Google something like:

  XP boot manager

  You will get hits with links to managers of free starter like this simple:

  http://www.MLIN.NET/StartupCPL.shtml

  Another popular and free tool with a built-in startup manager (and other interesting things) are CCleaner which you can download here:
  http://www.Piriform.com/CCleaner

  CCleaner allows you to manage most of the startup items and also do some other operations oriented cleaning.  Some people will you recommend is not to use the registry functions in CCleaner to avoid these features for now.  I have no problem with it for me, but sometimes it's a contentious issue, I prefer to avoid as much as possible!

  You can uninstall CCleaner later if you don't like it.

  You can disable the startup items, see how things look and if you want - you just delete them (or leave it off).

  After launch of CCleaner and see what startup items you can disable/remove, if you are still not sure of your startup items, follow these steps:

  Run CCleaner and choose Tools, boot and bottom right, click on the button "Save to text file" to save the startup information in a text - something like startup.txt file

  Save the boot information text file on your desktop (or somewhere you can find it) open the text file with an editor (Notepad or WordPad), select all (Ctrl-A), copy text, all the text selected in the Windows Clipboard (Ctrl-C) and then paste (Ctrl + V) the contents of the startup list to come back here in your next reply and maybe someone can tell you another thing to consider.

  A more revealing startup Analyzer is Autoruns which will allow the manipulation of all sectors of boot and does not actually install anything:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I have zero startup items on my computer, so none of this is important to me!

• Which cluster for the placement of DLR control VM?

  Intend to have 3 groups for a design of the NSX - calculation, cluster management (Infrastructure) and Edge? Cluster Edge willl have GSE and controllers.

  Who is the cluster recommended to place the DLR VM control, and what design considerations should be made?

  Thank you

  Ousmane

  The implementation of cluster is pretty much arbitrary as long as you have sufficient resources and groups necessary distributed port.  It would be wise to keep control of the DLR VM with the edges because it is a type of edge... Or it might be a good idea to move your DLR and the cluster in your cluster of right management controller, based on the logic function... that way the edge gateway data plane loads haveore has dedicated resources.

  With the placement of the bunch, his main concern should be the availability of resources to workloads in the cluster.  Secondarily, may give priority to the proximity of heavy workloads related? Other considerations are really just aesthetics.

  It is perhaps a good idea to examine the way which you cut the clusters.  What was your purpose behind this structure? Who is?

• initialize the array index

  Hello!

  I'm new to LabView and I am struggling with this problem for a few days...

  I have a 2D x CH spike_time table and on each line (table 1 d), I need to implement logic that requires the ability to dynamically initialize the two indexes.

  To be more clear, if I says each line of the table 2D with CH, it is the logic I should apply on each line:

  i = 0;

  while I<=>

  {j = i + 1;

  While ch (j) AND (i) - ch (j) ch<= inter_spke_interval="" and="" j=""><=>

  {j = j + 1 ;}

  If j - i + 1 > = min_burst_size then save (i, j);
  I have = j;

  }

  What is the best way to apply this logic in labview?

  How can I manipulate the value of the indxes, i and j to initialize as in the code? I tried to use the "Subset of the table" function in order to 'cut' subset of the line from i and j and records the SHIFT to pass again the subset as the loop, but I couldn't a solution anywhere nearby.

  If someone could share some ideas with me or has a similar vi useful, I would be very grateful!

  Thank you very much!

  Hi MG,.

  I already said you can use SHIFT registers to store I and j!

• List of Cluster and the virtual machines running on this group

  Hello

  I am looking for a way to discover all of the virtual machines that belong to a cluster. In other words, I want a list that maps a cluster to all virtual machines running on it.

  In the documentation of the API, I find that "ClousterComputeResouce"has a managed object to "HostSystem" reference. "

  And "HostSystem" is a reference to managed object to the 'VirtualMachine'.

  So I can do it like this: ClusterComputeResource-> ManagedObjectRefence-> ManagedObjectRefence (VirtualMachine)-> whatever_properties_I_need_from_the_VM (HostSystem).

  However, this would cause a lot of ' Vim::get_views"calls within a"foreach"loop." It would be a deterrent to performance as the vCetner in question has ~ 50 clusters and has ~ 3500 running VMs.

  I think this was going to literally kill the VirtualCenter with so many API calls.

  My Question: is there an effective way to find Cluster and their respective VMs in vSphere SDK Perl.

  In vSphere client, we get the tab 'Virtual Machine' when we click on the Cluster and you can see all the virtual machines that belong to this cluster. So I hope that there must be an easier way.

  Thank you.

  Hello

  You don't need the host_view for this action. Why don't you use begin_entity for views of the vm?

  my $cluster = 'cluster1. "

  My $cluster_view = Vim::find_entity_view (view_type-online 'ClusterComputeResource',

  filter => {"name"-online qr / ^ $cluster / I});
  {if ($cluster_view)}
  My $vm_views = Vim::find_entity_views (view_type-online 'VirtualMachine',

  begin_entity => $cluster_view.

  Properties-online ['name']);
  foreach {$vm_ref(@$vm_views) my
  print $vm_ref--> name. » \n » ;
  }
  }

  Hope that helps!

  Greetings, Chris

• create cluster and the addition of Managed server

  Hi all
  I created an area that has only adminServer. I created using config wizard and used the Oracle Service Bus option - 11.1.14(Oracle-OSB1). In the next screen, I have deleted creating managed server (Oracle_OSB1).
  I ended up having just adminserver.
  
  Now, I want to expand this area with adminserver to add the managed server and cluster.
  Any suggestion/documentation will be very useful.

  OK, in case you do not want to add any additional products/services then it is possible to do using config wizard. There are many other options available. Please see the section "configuration of cluster methods;

  http://download.Oracle.com/docs/CD/E17904_01/Web.1111/e13709/config.htm#i1043934

  To create a cluster using the Weblogic administration console, please see-

  http://download.Oracle.com/docs/CD/E17904_01/apirefs.1111/e13952/TaskHelp/clusters/ClusterRoadmap.html

  Kind regards
  Anuj

• How to perform an addition of column values in an insert query that would insert in the 3rd column, and the values how to insert into another table.

  I have two tables (2) RESULT TAB (1)

  CREATE TABLE TAB

  (

  NUMBER OF SNO

  A NUMBER,

  B THE NUMBER.

  NUMBER OF THE SUM

  );

  CREATE AN ARRAY OF RESULT

  (

  NUMBER OF SNO

  NUMBER OF THE SUM

  )

  my doubt is:

  (1) I want to insert a table TAB, my question is how to insert a column to the SUM using the column A AND B... Here im adding two values of the column and store result in the AMOUNT column.

  SNO   A  B  SUM           

  1 100 150 250

  2 300 100 400

  I want to like this, it is possible with single insert query?

  
  

  (2) at the time of the insertion TAB of values that SNO, and the values of table TAB $ insert in the table of RESULTS... is it possible these two inserts at the same time?

  in fact, im using another this table.fro TAB and easy to understand I write like that, please solve this problem

  First, you post in the wrong forum as this one is only for Oracle's SQL developer tool. So you might ask your question in the general forum of SQL.

  Second, you might solve your problems with bind variable:

  Insert tab

  (sno, a, b, sum)

  values

  (: SNO,: A: B: A + B :))

  You should not use sum as column name because it is a reserved word.

  More you cannot insert into two different tables with a single SQL, but you can use PL/SQL to do this:

  Start

  insert into tab values (: SNO,: A: B: A + B :);)

  insert into result values (: SNO,: A + B :);)

  end;

  If you meet sno from a sequence, you could do something like this:

  Start

  insert into values tab (seq_sno.nextval,:,: B,: A +: B) return sno in: SNO.

  insert into result values (: SNO,: A + B :);)

  end;

  Hope that helps,

  dhalek

• How can I determine which column of a Deputy Director-General was doubleclicked?

  I think that it has been easy. I have an advanced data grid. DoubleClick has allowed. Everything I need to know is what columnn was clicked. I need the name of the datafield.

  I can't use a listEvent because it's a mouse double click event.

  Someone has an idea.

  It does not work

  event.currentTarget.selectedItem.dataField

  Use doubleClick = "yourMethod (event)" property of AdvanceGrid... "