check the asynchronous process is running

Similar Questions

• Error initializing the asynchronous process

  Hi guys,.
  
  As suggested by several messages and items, process asynchronous is preferable because of its flexibility. I'm very happy with it until I have the following problem.
  
  We do fault handling on all our processes, using the hook and the policy fault. For an asynchronous process, we use another unmanaged code to return the fault. Recently, we noticed a problem. For some reason, every Sunday when the production BPEL server restarts, there are always a few BPEL process turned to retirement and offshore. We have already created a demand for service for it on metalink. But what causes another very serious issue:
  
  The calling BPEL instance sends a request to start the asynchronous process. As it is turned off and removed by accident, the initialization fails. But, as it is asynchronous, the calling process is not notified, which means that there is no fault raised to the calling process. This causes a lot of trouble because we are not notified of the problem. This was never a problem because we had not the process stops and withdraws before.
  
  This can be easily verified by a simple test case. Create a synchronous process a and process asynchronous B. leave a B invoke. Then turn off and retreat B. An instance can still be successfully executed without saying the problem calling B. If B is a synchronous process, a will always communicate a flaw in such situation.
  
  Of course, the domain log file records this ORABPEL-02106 problem. but we do not want to check the log file all the time and want to be notified when it arrives. Is it possible to catch this exception/fault in the appeal process?
  
  Thanks in advance!
  
  Steven
  
  Published by: sw12345 on July 26, 2010 09:41

  Aysnchronous by itself is supposed to be loosely coupled with the appellant. So the behavior you see is expected. BPEL persists the message invoke the message and Summoner of collection of discussions the message to process when the process is ready to pick it up.

  If you need to blame either visible by the appellant - you can disable this intermediate persistence of setting low configuration in bpel.xml of wedged.

  
  OFF.immediate
  

  -Sridhar

• Check the disk continues to run when I turn on my computer

  Whenever I turn on my computer. Check the disc is still running. I have let it run before and I restart my computer and it works again. When I let the program run, he never finds anything and it's getting boring. Can anyone?

  Whenever I turn on my computer. Check the disc is still running. I have let it run before and I restart my computer and it works again. When I let the program run, he never finds anything and it's getting boring. Can anyone?

  1. click on the start menu and open the Run dialog box.

  2. Type "cmd" and back (Note: don't enter quotation marks)

  3. then type "fsutil dirty query c:."

  4. If the returned message indicates that the volume is dirty, proceed to step 5

  5. then type "chkdsk c:/f/x.

  6. after that finshes repeat step 3.

  7. If it is no longer dirty then reboot and the problem should be solved.

  If you continue to receive the drive guest check after completing the above steps follow the instructions HERE

• How to check the MSDS 13.2 running MSD Agent (legacy mode) or TMS provisioning or extension of TMS provisioning services.

  Hello

  How to check the MSDS 13.2 running MSD Agent (legacy mode) or TMS provisioning or extension of TMS provisioning services.

  Kind regards

  Siva

  My TMS is strictly using Extension of Provisioning, because I am running 14.3.2 TMSPE is the only option for me, so I can't provide a screenshot.

  However check you by going to: administrative tools > Configuration > General settings, look for the commissioning Mode.

  That said, I suggest that you consider migrating to TMSPE if you have not already, that the recent version of TMS have removed TMS Agent legacy mode.  If you want to use the latest versions of TMS and take advantage of the features it provides, you will need to perform the migration, if not already done.

• You can put your computer to sleep while the defragmentation process is running?

  Continue the process of defragmentation even if the computer is set to mode 'sleep'?

  Nothing happens when the PC goes to "sleep".

  -steve

• Check if a process is running

  Hello
  
  I had a procedure that should not be carried out simultaneously in several sessions.
  
  That's what I coded to achieve:
  

  CREATE PROCEDURE TEST_SIMUL_EXEC
  IS
     v_count        INTEGER;
     my_exception   EXCEPTION;
  BEGIN
     SELECT COUNT (1)
       INTO v_count
       FROM v$access a, v$session s
      WHERE a.SID = s.SID AND a.OBJECT = 'TEST_SIMUL_EXEC'
            AND s.status = 'ACTIVE';
  
     IF v_count > 0
     THEN
        RAISE my_exception;
     END IF;
  --the procedure execution logic goes here.
  EXCEPTION
     WHEN my_exception
     THEN
        DBMS_OUTPUT.put_line ('Multiple simultaneous execution is not allowed.');
  END;

  Don't you think it's a good and a foolproof approach?
  
  Thank you
  CJM

  This requirement is exactly why Oracle provides us with the DBMS_LOCK package.

  Go look it up in the documentation.

• How can I check the disc for physical integrity on Satellite P305?

  I have P305-S8838.

  I had some freezing problems earlier this month, and on the notice here, I nu start-up and reduced services a little at a time.
  Now, I have a few more crash but don't know if it's a physical disk problem.

  For example... I have run CHKDSK and does many things and happens at the exact same spot and hangs at step 4 file 5 3498 or 421168 processed.

  I tried to run CHKDSK in SafeMode but tells me drive is locked and it will run when I restart. But the restart put back me in normal mode and get the same hang.

  Now, for more suspicion of a physical problem. I tried to make a disk image with ACronis and same problem occurs because he says impossible to reading data 226 964, 072 sector and ask if I want to ignore and continue. I say yes to everything. Log shows he made about three of these attempts and crashes.

  I ran sfc/scannow and it says found problems that he was unable to fix. The newspaper isn't so long and complex course that all means. I could send these log files if someone can help me understand.

  I ran the test of memory OK.

  I if I could put in DVD Toshiba and certain diagnoses, but when I put in the disk I get this big warning I'll crush, etc and I have chicken.

  This didn't stop me to use the computer, but its all irritating.

  How can I check the disc for physical integrity?

  Bob

  Hello

  He idea goo to check the HARD disk and run some diagnostic procedures.
  For this, I recommend the freeware tool called Drive Fitness Test.
  It allows you to check the HARD disk for certain physical defects.

  Google for this tool. You can get it from multiple pages download

• to verify the mandatory process... I'm doing a demonstration

  where in my current business people use the command such as ps - ef | grep pmon...
  
  I want to show a case to say that ps - ef | PMON is not a good way to check
  weather of the entire binding process are running...
  say the pmon process runs... But it is not necessary that all the mandatory process is running...
  Is this really the case...
  
  We know situations where dbwr, lgwr or smon does not work but pmon is still running.
  Thanks and greetings
  Johny Paul
  
  I think that when we are told to check all mandatory process, we have to check all the mandatory process...
  Not use commands like ps - ef | PMON...
  
  Please provide more information on this...

  I can't see a single reason to change what works. It seems that the right way for me.

• Value of the page element in the APA process not maintained after the send this page

  Hello - I have a sequence of events that goes like this:
  
  (1) region 0 REG_1 Page is rendered before footer
  -REG_1 region uses javascript / AJAX to call App process PROC_1
  -PROC_1 defines Page1 item PAGE1_MESSAGE for X
  -After that PROC_1 runs correctly, REG_1 don't doSubmit()
  
  (2) region 0 REG_2 Page is rendered before footer; in this case
  After the page sent by REG_1. (Requirements to ensure that)
  REG_1 has not yet reached)
  -REG_2 region shows an alert PAGE1_MESSAGE (= X).
  -REG_2 region uses javascript / AJAX to call App process PROC_2
  -PROC_2 sets page 1 point PAGE1_MESSAGE to Y
  -PROC_2 sets point Application DEBUG to PAGE1_MESSAGE (this is for debugging)
  -PROC_2 defines the point of Application APP_MESSAGE to Y (this is also for debugging)
  -After that PROC_2 runs correctly, REG_2 don't doSubmit()
  
  (3) after that REG_2 sent the page, here's what I have:
  -Point application APP_MESSAGE = y. good. That's what it has been for PROC_2.
  -Point Page 1 PAGE1_MESSAGE is bad. X. That's what he has been put to in PROC_1.
  -Point application DEBUG = y. good. This shows at least that PAGE1_MESSAGE was
  the value Y in PROC_2... but for some reason this value is not be kept
  After the application process is running.
  -There's that several other elements of the application located in PROC_2, and they are all correct.
  
  
  Any ideas as to why this is happening? It seems like it should be
  quite simple: set the value, send page, the value must be that
  I put it.
  
  Thank you
  Carol

  Hello

  Exhibition (doesnot save session state), I am not changing who is P1_MESSAGE_1.

  Why does that matter? Why does the hidden item behave differently?
  

  Yes, Hidden Items by usually default state saves. But this isn't the problem in this case because I had changed the item to display only (state saved) and that did not help. Finally back in doesnot save state.

  Try to replace alert (ajaxResponse); with the lines below

  $s('P1_MESSAGE_1',ajaxResponse);
  alert($v('P1_MESSAGE_1'));
  

  Maybe the session state is defined (server), but the value in the DOM HTML (browser) to P1_MESSAGE_1 is not defined. If adding the line above works then the hypothesis is correct.

  And I see that you made the source "static" assignment ...
  

  Yes, I made this change, because it was a reference in itself I think it was redundant. And I had to correct what I thought is not just before debugging. Which cannot be linked to the problem though.

  Kind regards

• R12.2.5 Installation on OL 7.1 ERROR: RW-50010: error:-script returned an error: 1 RW-50004: error code when you run the external process.  Check the log file for more details

  I tried to install EBS 12.2.5 on OL 7.1 with rapidwiz and got this error when applying the unique patches in second File System

  "Second system logfile file - /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log.

  LOG FILE:

  _____________________________________________________________________________________________________________________________

  Step 0-8

  Command: /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh

  Step 4 of 8: UNIX making pretreatment

  Running: chmod 777/db/oracle/OraInventory r

  chmod-r 777/db/oracle/OraInventory succeeded

  Step 4 of 8

  Performance: known appltest - c "/ app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh".

  PHASE of INSTALLATION has BEGUN: APPS TECH STACK: Wed Dec 2 17:27:07 IST 2015

  runProcess_1

  StatusString installation of Applications Technology Stack

  Copy the temp area models

  Inventory name is: app_oracle_TEST_fs2_Oracle_EBS_app

  One-time fixes copy to temp area

  Remove JDK_TOP: / app/oracle/TEST/fs2/EBSapps/comn/util/jdk32 if there is

  / App/oracle/TEST/fs2/EBSapps/comn/util/jdk32 deleted directory

  Installation of WebLogic Server.

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml oracle.apps.fnd.txk.config.InstallService

  WebLogic Server successfully installed

  Web Tier utility installation.

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml oracle.apps.fnd.txk.config.InstallService

  Level successfully installed Web utilities

  Registration EBSUsing /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml oracle.apps.fnd.txk.config.InstallService

  EBS registered successfully

  Rename/home/appltest/bea/beahomelist in /home/appltest/bea/beahomelist.29266 to avoid problems during WLS

  patching

  / Home/appltest/Bea/beahomelist renamed successfully.

  Application of ad hoc patches

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml oracle.apps.fnd.txk.config.InstallService

  Fatal error: T2K install Service

  oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: Output = 1 see log for more details. CMD = perl /app/oracle/TEST/fs2/FMW_Home/webtier/OPatch/opatch.pl apply - verbose - silent - ocmrf /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp jdk - / app/oracle/TEST/fs2/FMW_Home/webtier/jdk/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/patches/7695070/7695070

  at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:312)

  at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)

  at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)

  at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)

  at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)

  at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)

  at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)

  at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)

  at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)

  Can not install the unique patches

  RW-50010: error:-script returned an error: 1

  RW-50004: Error Code when you run the external process.  Check the log file for more details.

  
  

  It was recorded in /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log and I don't know how to find another newspaper for such details as mentioned in this journal. Please help me with that.

  
  

  Concerning

  KasunA
  

  Found a workaround.  The problem is that, before the 7695070 patch is applied, the installation program backup directory/apps/fs2/FMW_Home/webtier/jdk in /apps/fs2/FMW_Home/webtier/jdk_backup_existing_version, but then it clears. / jdk - the patch fails because it can't find it.  I had to rename the directory of the jdk for jdk2, and as soon as it gets deleted quickly and rename jdk2 jdk.  Then he applies the patches without problem.  A symbolic link would do the same thing.

• How to check remotely if the process is running or not?

  Is there a way we can check if the process is running or not?

  Thank you

  Afonso

  The following WSDL allows you to check the status of remote process:

  http://servername: 8080/SOAP/services/TaskManagerQueryService? WSDL

  Steps to follow:

  1. with the help of TaskManagerQueryService , you can search your Instance of Process (with some filter settings).

  2 get the ProcessInstanceRow from the result list

  3. check the status of the process of processInstanceStatus property

  Hope that helps!

  Nith

• When I try to shut down my computer with Firefox running it hangs and stops the shutdown process.

  When I try to shut down my computer with Firefox running, it does not close properly during the closing. Instead, it crashes (as described in this article) and will continue to do so until I have stop the shutdown process and close it manually, where it will still not respond. There is the substantive issue. Here is the list of the relevant data to identify more precisely:

  On the list of programs is still active during the closure, the window of Firefox starts only appearing once as it should be, but a few seconds after starting to hang, it begins to appear a second time on the bottom of the list, with the specific name of the page is a duplicate of whatever it is on the original.

  This problem does not occur in safe mode, but it is not caused by one of my addons either, as I figured out after disabling all my addons with tools > Modules rather than the safe mode and still the problem.

  He is listed as that passes several times a week, but that is simply because that's how many times I forgot to close Firefox before pressing 'closed' and leaves the room without bothering to check it works. It happens whenever I try to turn off the computer with Firefox is running well.

  See this article--> occurs not in Safe Mode

  Check and say whether his work after turning off hardware acceleration.

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• Windows Update cannot currently check the updates, because the service is not running. But it is!

  When you try to run windows update on my win7 box family premium, I get the following message: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. »

  Steps has been involved:

  1. I restarted and even restored to the point when the last update was installed.

  2. I verified that the service is running and checked that there are no errors in the the event log for this issue.

  Any ideas?

  PA bear,

  I solved the problem, apparently, some of the dll files becomes involved in the process of updating Windows and just need to be reassocie but for the analysis patterns below are the answers to your questions:

  1 Win 7 Home Premium installation

  2 64 - bit OS

  3 avast! Full version

  4. no other anti-virus/anti-spyware has never been installed

  5. computer was custom built by me, destructive disk used on a new HDD before installing it so that it wasn't a possibility of always being on the disc software.

  6. I left on deployment (I'm in the army) and when I came back my wife told me that the PC was not able to download the updates since November of last year, so she switched off and left to me when I got home.

  Thanks for the quick reply, I was just in the difficulty that I used while watching a few messages on another Web site.

• I seem to have in dual processes that run in the Task Manager.

  In the Task Manager, I see the same process running several times.  Example: under user/Admin""(My name as) ","Local Service","Network Service"and"System"." "  These really duplicates and they slow down my system?

  Are they duplicates?  Perhaps.

  They slow down your computer?  Depends on what you're trying to do.  Anything that takes your resources take the pool available for other applications.  However, if you do not run low on resources (your CPU has a lot of horses for what is needed and you're not missing memory for most) - then it probably isn't as much of a downturn as just all of the resources actually get used.  You won't slow until that run out you of resources and try to open something else.

  If you worry about it?  N ° except if you have been compromised (you have a virus, worm, Trojan horse, malware any) and this is what is running - the system is as it should.  You are not running a single-user system - even if you are the only physical user.  Service accounts, etc. are there for the functionality of the machine as a whole.

  Windows XP...?

  I have some tips that might help you optimize this system...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 7 and 10 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.