Check the file if it is corrupt

Similar Questions

• The file or directory is corrupted or unreadable

  I have a number of empty folders on an external hard drive that I want to delete. I managed to delete the files in these folders individually, but get the following message... "' Can't delete # the file or directory is corrupted or unreadable", when I try to delete the files. "  I tried to delete it by Total Commander without success.  Your help is greatly appreciated.

  Sometimes corrupt files/folders can be repaired by a 'chkdsk' disk check operation while specifying the "/ R" or "Repair" option...

  "How to perform the disk error checking in Windows XP"

  <>http://support.Microsoft.com/kb/315265/en-us >

  It is a good operation realized in a regular maintenance of your computer and any time that the disc problems are suspected.

  HTH,

  JW

• Windows XP Setup error: the file ohci134.sys is corrupted?

  I was on my computer when my power cut off, and now it used to boot past the Windows XP loading screen, so I inserted the windows disk to run a chkdsk command or a repair, but I get the error: the file ohci134.sys is corrupted. Press a key to reboot the computer. »
  It won't let me access to the CD-ROM to install windows because of this error, and I can not boot past the windows loading screen! He's going to enter the safe mode options but whatever one I choose, it flashes a quick blue screen which says UNMOUNTABLE BOOT VOLUME. How can I fix?

  This is a nice article if it starts your desire to install the as option to start Recovery Console, your system and that you have a genuine XP installation CD bootable that corresponds to your installation.

  Here, the system does not start, there is no installation of the Console recovery and most people either have no real XP bootable installation CD or if they don't have one, it's older than their Service Pack installed.

  Unfortunately, we don't know anything about this system which is afflicted, except that it's a computer that no longer starts.  A little more detail would help, but that's the way things happen here in MS Answers forums.

  I just make a bootable CD of XP (no XP media required) Recovery Console and use it.

  Here's how:

  So, let's start with this:

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Error "Unable to create cache. The file or directory is corrupted or unreadable. »

  Original title: cannot create the ReadyBoost Cache

  Win7-64 bit-8gbRam use Flash drive for ReadyBoost cache HP16gb now receive the message: "unable to create the cache. The file or directory is corrupted or unreadable. "Should I delete the old cache file and try again, or is there another solution? Thanks for any comments.

  Well Ok,

  Run a check disk on the USB and see if it detects any errors.

  Refer to the article below for assistance.

  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• received error 0 x 80070570 (the file or directory is corrupted and unreadable). __

  I tried to copy a file on my HARD drive on my HCSD card and received the error message 0 x 80070570 (the file or directory is corrupted and unreadable).
  HCSD card was used on an audio recorder, but I can play the majority of the file on the recorder itself. It's just that Win7 will not let me copy this file. Help, please. Thank you.

  0 X 80070570 - ERROR_FILE_CORRUPT

  If it relates to the wu or mu page, recommend to re - install activeX controls

  If it relates to the fix - then re - download the patch manually

• Check the file system on C or registry cannont load the hive!

  Ok... I have a Dell Vostro 1510... all of a sudden, I can't on this laptop!  I have Windows XP Professional.  It lights up when I choose to start windows... I am said to be:

  Checking file system on c:

  The type of the file system is NTFS.

  Volume label is System.

  Then, when it starts to run it says: CHKDSK checks the files (step 1 of 3)... it happens to 47% finished and that's all!  It won't do anything else, it just stops!

  If I have to cancel the verification file system I get this message:

  STOP: c0000218 {Registry file failure}

  The registry cannot load the hive (file):

  \SystemRoot\System32\Config\System

  or its log or alternation.

  It is damaged, missing, or not accessible in writing.

  I do not have the disks provided with the laptop or I will say that I can not find them... I read a lot of these forums but none I saw helps me!  Because I can not enter and try to run anything!

  Thanks for any help in advance!

  I see you mentioned do not have all the disks with the laptop and maybe it's that he came not with any, because the installation files are likely in a hidden partition.

  but try to borrow a winxp cd and boot with it.

  then in the window settings pitch repair to start the recovery console.

  then at the prompt of disk, run the following >:

   

  Chkdsk /r

  Chkdsk /f

   

  then exit, remove the cd and restart the computer.

   

  the above commands are redundant, but nothing wrong with double controls.

   

  In addition, if you receive a following error on boot sector, then run via the recovery console fixmbr.

   

   

  
  --
  DB·´¯'·.. ¸ ><)))º> --> sent via windows live mail

  .

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• When I try to run system repair ffrom originally Vista 32 bit dvd, I get the error "the file i2omp.sys is corrupt"

  Original title: when I try to run the system repair ffrom the original Vista 32 bit dvd, I get the error "the file i2omp.sys is corrupt" is anyone know the solution for this problem? Thank you, Kelsey.

  The message arrives as soon as I select "repair system" can not find the file on the Windows Dvd.

  Hello

  1. why you try to run the system on your computer repair?

  2. when exactly you receive this error message?

  If you receive the error message while booting from the Windows Vista DVD it means that the file i2omp.sys is corrupted.

  You may need to make arrangements for a Windows Vista disk that corresponds to the same edition, as it is installed on your computer. Later, try to repair the system on your computer.

  How to replace Microsoft software or hardware, order service packs and replace textbooks?

   
  Reference: What are the system recovery options in Windows Vista?

  Hope the helps of information.

• Windows 7, Sysprep after getting an error "the file or directory is corrupted and unreadable."

  When I run Sysprep on this Dell Latitude E6520 with Windows 7 (x 64) professional, then boot into Windows PE to create a picture, he said "the file or directory is corrupted and unreadable."

  I made sure to restart 3 times before I ran sysprep this time because this is the 2nd time I got the error above.  Every time it reboots normally and the question obviously didn't happen until I ran sysprep.
  The last time I had to delete the partition and re - format and start over. Fortunately I took a picture of this time right front of sysprep.
  I even tried the Windows 7 installation disc to repair the MBR and the boot record, but he said he couldn't fix it, and he can't read this partition at all.
  I thought also it could be a bad drive on this computer brand new, but I ran the diagnostics on the hard drive and there are no errors.

  Because of the scope of your question, which is a professional information technology associate, its best that you publish in TechNet IT Pro forums to receive the best support for your question:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• Please give me the number of hash MD5 to check the file .iso from win7

  Please give me the number of hash MD5 to check the file in win7 because when I try to install win7 (after dload web) its saying some files are missing if please check the files and restart the installation process. so I need to check the file I downloaded is full or not

  Please send me the file md5 hash as soon as possible

  Windows 7 RC Build 7100 x 86
  File name: 7100.0.090421 - 1700_x86fre_client_en-us_Retail_Ultimate - GRC1CULFRER_EN_DVD.iso
  Size: 2.35 GB
  MD5 Hash: 8867C13330F56A93944BCD46DCD73590

  Windows 7 RC Build 7100 x 64
  File name: 7100.0.090421 - 1700_x64fre_client_en-us_Retail_Ultimate - GRC1CULFRER_EN_DVD.iso
  Size: 3.04 GB
  MD5 Hash: 98341AF35655137966E382C4FEAA282D

• Receive the error "E: is not accessible. The file or directory is corrupted or unreadable.

  Original title: USBnot work

  Today, I inserted a USB key works perfectly in my laptop computer and got this message:

  "E: is not accessible. () The file or directory is corrupted or unreadable.

  Ideas of how this could be everything and no matter what suggestions how to fix it?

  I use an Acer laptop E1-522 (a new one that just came back from the manufacturer after warranty repairs and also had a technician called and insert a new hard drive because of problems with product key).

  I use Windows 8.1 and have used Internet explore and currently using Firefox as my browser (same questions with both browsers).

  Thanks in advance.

  Sorry, I don't remember the sequence that I used, but messages asked me to change the drive letter of the drive that I was using, so I changed it from E to F. He has not made a difference, because I always get a message "the disk is damaged or unreadable. Finally, I formatted, so I guess it should be the end of the story. I got lucky that didn't not lose all the useful data.

  Thanks for your help. I very much appreciate the way in which people help "technologically challenged" people like me.

• After that the effects cannot continue: error when access to the files instead of inside "/ users/me/Library/Preferences/Adobe/After Effects / 13.8", if it please check the file permissions and try again.

  After that the effects cannot continue: error when access to the files instead of inside "/ users/me/Library/Preferences/Adobe/After Effects / 13.8", if it please check the file permissions and try again.

  [Fixed spelling - Mod]

  Go to the folder listed in the path and change the permissions to read/write. Do you know how? It is in the info file.

• The file ProductionPremium_cs5_ls7.7z is corrupted from the adobe download page, my portable hard drive crashed and I am trying to reinstall, and naturally, I can't talk to someone at Adobe, please help

  The file ProductionPremium_cs5_ls7.7z is corrupted from the adobe download page, my portable hard drive crashed and I am trying to reinstall, and naturally, I can't talk to someone at Adobe, please help

  Try a different download link

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

• "Error when access to the files of preference... Please check the file permissions and try again.

  I tried installing After Effects test and received the error message:

  "After that the effects cannot continue: error when access to the files instead of inside" / users/Kelly/Library/Preferences/Adobe/After Effects / 13.5 ", please check the file permissions and try again. '"

  I'm unable to check file permissions because the file path does not exist.

  I'm on a 2013 15 "retina Macbook Pro running OSX 10.9.5

  Premiere Pro downloaded successfully. After effects will be not open and wont let me start a trial (he thinks I've already started?)

  

  Thanks for any help that is going can offer!

  kbombcarpenter To access this file reference the steps mentioned on help below link, user library folder is hidden by default.

  Access the hidden user library files. Mac OS 10.7 and later versions

• How to check the file for the virtual machine size Esxi shell

  Anyone who can tell me how to check the file for the virtual machine size Esxi Shell. I tried this command-h ls but does not work.

  Have you checked "ls-lh', it will provide information as the attached screenshot." "

• Check the file size before downloading

  Hi there guys...

  I'm having a problem at the moment... How can I check the file size before being transmitted to the server?

  I was given a task to check if the file size limit is 500 KB and then block the download and warn the user.

  According to my colleague from work... This is not possible with Javascript or Ajax... is there another method I can use?

  kindly help... Thank you

  It is a good answer, but it is interesting to note that Flash Player is itself a control ActiveX (when run in IE). In short, you need something beyond code that runs directly in the browser to do this. It can be done with just HTML and JavaScript in a web page.

  Dave Watts, CTO, Fig Leaf Software

  http://www.figleaf.com/

  http://training.figleaf.com/

  Fig Leaf Software is a small business Veteran - Owned (VOSB) on

  GSA Schedule and provides high caliber of the authorized seller

  instruction at our training centers, online, or on-site.

  Read this before posting:

  http://forums.Adobe.com/thread/607238