Check the Wifi signal with 'wifi_get_status '.

Similar Questions

• A degradation of the WiFi Signal with laptop lid closed

  I have a HP Presario DV6 running Windows 7 64-bit.

  It has an Atheros AR9285 802.11b/g/n WiFi Adapter using the 8.0.0.172 driver Version dated 09/23/2009

  I noticed that if I run the laptop with the lid closed there is a degradation in WiFi signal.  More specifically, with the lid open, I can see the signal from my router with - 77dBm, but with the lid closed this fall to-87dBm. (No other changes to the environment)

  I checked all the power settings to keep the NIC power on with the lid closed.

  This deterioration is simply a feature of hardware design and antenna site is there anything I can do about this other than get external USB network card?

  Hello:

  I recommend that you only install the latest driver. Who can help a bit.

  But the main reason why your signal degrades, it's because the antennas are under the screen. When the screen is opened, they stick to the top. When closed, they are ineffective, because the ends are oriented horizontally and lower (toward you) instead of vertically.

  Latest version of the driver:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-95105-1&mode=4&IDX=2&prodTypeId=12454&prodSeriesId=316720

  Paul

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Satellite C850D-11 q keep loses the WIFI signal

  Toshiba Satellite C850D-11 q BT Hub 4 Realtek drivers

  I lose the wifi signal at least twice a day. Same message to loose / broken cable and reset the wireless card. Realtek has informed me that I have the latest drivers. The present is Realtek RTL 8188CE Wireless Lan 802.11n PCI-E NIC hub is new. With the help of BT, I now use the 5 GHz as the hub is on a shelf just below the laptop.

  I don't know what to do else and thought someone here can get an idea of what to do next apart from the change of servers!

  Thank you

  LEA

  I wait too long? Has decided to search for updated drivers. Goes up to 8.1 not 10.

  Then decided to download the manual. Informed, there was one, but there is no way to access it. Message received this laptop modified 10/15/15. Well thank you very much for this. Message also States that "with this tool, you will get urgent information about updates for your computer. I clicked... Web page could not be found.
  Large. Because buying a new laptop, but it will not Toshiba, that's for sure.

  LEA

• Why my MB Air decreases the wifi signal

  My 2012 13 "core i5 MacBook Air running different operating systems will remove the wifi signal and it is getting worse. someone at - it a reason why?

  How your MacBook Air running different OS version? However, the Wi - Fi signal fell to each version?

  This always was a problem or just started to happen? Up to now, what did you do to try to solve?

• How a microwave oven interferes with the WIFI signal?

  MICRO-WIFI INTERFERENCE

  Please explain THAT HOW A MICROWAVE actually INTERFERES with the laptop WIFI signal...  How to turn off the oven microwave takes the PC adapter, for example?  When the microwave oven is off and don't use it, should also be disconnected? In the equipped cafes in WIFI, are microwave ovens, degrading the quality of the signal?

  I thank very you much for your comments.

  Joe

  This is caused by the fact that both microwave and most wifi routers operate at a frequency of 2.4 Ghz, there is a setting on some wifi routers that allow you to operate at 5 GHz, but this frequency moves not by walls well, insofar as they interfere, the microwave should not disseminate its frequency outside the oven microwave and most of the routers wifi broadcast in all the directions, radio waves can bounce off the walls and envelope the room and other areas as well, this isn't a line of site, so unless you have your computer very close to the microwave you should not receive any interference at all. or course, if you stick the router inside the microwave.

  Hope this helps,
  -Ray

• HP laptop: scope and the wifi signal strength

  very very weak signal wifi and range signL force is very low, even I'm sitting near router I try every thing but not solve issue please help I use window 8 pro

  HI @vickysaeed,

  Welcome to the HP Forum! Is a great site to find information, tips and suggestions. You have the most rewarding experience please consult the HP Guide's Forums. First time here? Learn how Post and more what is your exact model of HP laptop?  Computers laptops HP - how can I find my model number, serial number or product? What operating system do you use?

  I understand that your wireless network has a short range of signal and the signal is weak, even if you sit close to the router. Even if you've tried a few troubleshooting you have not been able to overcome this difficulty. Assuming that you are running Windows, have you checked the updates? You ran the Windows troubleshooting tool? Did you run the HP Support Assistant?  Please read this post on the @Greatforum - Deku Tree as it should help. Commons fixes for wireless connectivity problems Please keep me updated on your progress.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. "In addition, by clicking on the" ""Twww.Mountainview.rsb.qc.ca Up ' below is a great way to say thank you!

• COMPUTER LAPTOP WON'T RECOGNIZE THE WIFI SIGNALS. NETWORK CARD SAYING ERROR 52?

  Hello

  Can someone help me get my laptop to connect with the internet? He ceased to recognize the wffi signals and the wifi adapter sys there is error 52?

  I can connect using a laptop dongle.

  Try to go to the support site of the PC for the manufacturer and the model and the OS you have and download and install the latest compatible drivers on their site.

  Esp if it's wrong?- http://TechNet.Microsoft.com/en-us/library/ff710454%28V=WS.10%29.aspx

• The WiFi signal strength is good, but still not able to navigate

  Hi experts,

  IAM facing a problem when connecting via WiFi, we use a router in our hostel

  In all my colleagues navigation lapys is fine, but in my PC torrents are going on well, but the navigation is not possible (tried 3 browsers)

  Can you please help me in this issue

  Here is my PC details:

  My PC is around the age of 2 months

  WINDOWS 7 ultimate

  Manufacturer TOSHIBA

  I installed all the drivers recommended by myself from my pc, currently I have ATHEROS FAST ETHERNET CONTROLLER, ATHEROS WIRELESS NW ADAPTER in the NETWORK ADAPTER (Device Manager)

  And the WiFi light is also very good, with 4 license on 5 points, but still can not able to navigate

  Thanks in advance,

  Mr. the President thank you for your answer

  I don't have McAfee installed, now I got the problem.

  I kept some proxy settings in my browser, so the problem was, now its working well

  Sorry for the inconvience, thank you

• My Pavilion G7 suddenly can't recognize the WiFi Signal for the second time in a year

  Hi all

  My flag is about two years old and the

  motherboard has been replaced by HP in virtue

  warranty.

  For the second time in nine months the laptop suddenly can't recognize my router

  WiFi signal. This time if I do a system reinstall, I'll have to reinstall 50 apps! I try to avoid this if possible. I understand that changing the bios settings can set wifi problem but no idea how this step will affect files (delete/save). Upgraded to WIN7 to 8 to 8.1. Help, please. Thank you very much.

  Hi BHK6,

  Yep, installation of adapter Qualcomm Atheros WiFi update worked!

  It worked immediately, but I wanted to give him a full 24 hours or more to see if the fix stuck.

  This problem seems to be resolved.  Now I can finally return to my much delayed project.

  Thanks a lot for helping me through this. :-)

  Robert

• How to check the page dirty with default values existing in viewObject?

  Hi all

  I use JDeveloper 11.1.1.4.

  I have two pages in my application. I am browsing for page2 page1.

  Before opening page 2 I created new line page 2 notice of object using method 'Create Insert()' with some default values by using the ViewRowImpl class.

  My problem is that I have a button to return to Page 2. If I click the back button, then check the Application module is dirty or not.

  But it always shows AM is dirty due to I'm setting some default values in ViewRowImpl. If I avoid the default values in ViewRowImpl then AM dirty check works fine.

  My Question is how to check the AM (or) dirty Page with default values in the object view?

  My bean Codes:

  Links DCBindingContainer = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  DataControl dc = bindings.findDataControl("AppModuleDataControl");

  ApplicationModuleImpl am = ((ApplicationModuleImpl) dc.getDataProvider ());

  If (am.getDBTransaction (.isDirty (()))

  {

  return "Page is dirty."

  }

  My Jspx Codes:

  < af:commandLink id = "cl6" text = '2 '.
  shortDesc = "Add Row in Page2"
  actionListener = "#{bindings." Action CreateInsert.execute}' = 'Edit' >

  Thank you

  David...

  see this

  http://www.techartifact.com/blogs/2013/11/how-to-check-ifdirty-is-modified-for-view-object.html

  http://www.jobinesh.com/2011/05/checking-for-dirty-data.html

• 2230 N Intel Wifi adapter - cannot see the wifi signal 5 gig

  Router Belkin N750 dual-band.  For some reason, my laptop can't see 5 GHz signal.  I looked at the options of wifi card, but could not get the 5 GHz network to appear in my list of available networks.  Any ideas?  Its SSID is broadcast.

  N mode is enabled on the card, I tried broadcasting as a and n and n only.  None worked.

  Hello:

  The reason why because it is only a single card that the Intel 2230 does not see the 5.0 GHz band is band (2.4 GHz).

  Specifications of the card are on the link below.

  http://www.Intel.com/content/dam/www/public/us/en/documents/product-briefs/Centrino-wireless-n-2230-brief.PDF

• Compaq presario c700-c795tu: unable to connect to the WiFi network with WPA2 encryption

  Hi team,

  I tried all the options in your post and I am still unable to connect to WiFi with WPA2-PSK encryption.

  I am currently using the adapter network driver atheros 5007 wireless.

  Some of the links in your message that resolved this issue earlier are currently unavailable.

  It would be great if you could help me to solve this issue.

  Concerning

  Roger

  Here is the patch for WPA2 for XP SP2...

  Install and reboot and then see if you're OK...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1974

  That's the only reason why I can think that now prevents you from being able to connect on a network with WPA2 Personal Security.

• Unable to connect to the generator signal with LabView

  Hello

  I use a Tektronix AFG 3021 B signal generator. I installed the National Instruments driver (tkafg3k) for this device. My computer is connected to the signal in the block diagram generator, I place a block called "Example - Getting Started vi". I run the vi (there is no need of connections, so the vi has just the one block).

  The vi then gives me this error:

  Error 1073807343 has occurred to be initialized with Options.vi of tkafg3k
   

  Possible reasons:

  Driver status: (Hex 0xBFFF0011) primary error: error (Hex 0xBFFF0011) - information on the inadequate location or a resource that is not present in the system

  I know that the signal generator properly communicating with the computer because when I run "VISA Resource Manager", I can ask for the name of the device and it returns the correct name.

  -I'm using Labview 8.6.

  -I have NI-VISA installed 4.2

  -The driver that I use is available here: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=005994E37F5B2318E0440003BA7CCD...

  -J' use the driver that is for version 7.1

  -J' uses this compliance record: http://joule.ni.com/nidu/cds/view/p/id/1095/lang/en

  What is the cause of this error and how can I solve this problem?

  Thank you.

  -Zach

  Do you really need to use the IVI driver, or you can use the LabVIEW driver? If you have need of IVI, configure you the Max with a logical name, etc.

  PS You have posted to the wrong Board. It is for the signal generators of NOR. You should have posted to the Instrument of narcotics control.

• I have the strength of the weak signal with my wireless router and I did all the things recommended to ensure good reception but no luck what can I do?

  It's a my router belkin54G
  Things ive not tried no metal of any kind anywhere around my connection
  No cordless or cellular phones around not even on the same floor
  my firewall on my computer is turned off and the system has been set up to work together, but I still have a bad connection

  Hello

  1 Windows operating system you are using?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  Why the my wireless signal strength is so low?

  Troubleshoot low wireless signal quality

  You can also read the following article and check if it helps.

  Windows wireless and wired network connection problems

  Hope this information is useful.