Check this photo

Hello everyone

I create this image in photoshop a year a go and now I want to change the letter of my picture

This is the image:

http://orignalsoft.com/wp-content/uploads/2016/04/my-Photoshop-project.jpg

but now I can't change it I don't know, and now also I can't change it

If you did not save your original document laminate as a multilayer as a PSD file, or you could as a layered Tiff file will start from scratch.

Tags: Photoshop

Similar Questions

  • SE message: changes made to this photo has not been saved. The file may be read-only or you are not allowed to check-in at the location of the photo, trying to crop an image, or mount it

    Original title: photos

    If I try to crop a photo or repair, it has a message of: changes made to this photo has not been saved. The file may be read-only or you may not save to the location of the image.

    They worked very well the other day, what's past?

    Hi boneyardwolf,

    1. where are the photos?

    2. you have any third-party photo editing software?

    3. what type of files you want to change?

    You can check the following link and try the steps suggested by Marilyn - Support Engineer Moderator Wednesday, March 4, 2009 04:47 and see if it helps to solve the problem

    http://social.answers.Microsoft.com/forums/en-us/vistapictures/thread/9f6bf1f8-50EC-4baa-b2c5-212c823ded68

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error trying to open the photos scanned in the Windows Photo Gallery: Windows Photo Gallery can't open this photo, the format is not supported

    I scanned a few photos, but its entry in the adobe format, I wan't it in windows photo gallery, which will make

    I right click on the image, click on the Prog by default to choose, select windows photo gallery, but it did not open, he writes

    "Photo Gallery can't open this photo, the format is not supported.

    Your better off using paint to scan directly to, because for one, it has a way to change the types of files and two he has a check-in feature, more than anything the photo library has.

    All you have to do is open paint, click the blue button and click option of scanner or camera, follow the prompts.

    http://Windows.Microsoft.com/en-us/Windows7/using-paint

  • Photo Gallery can't open this photo or video this file format is not supported, or you do not have the latest updates of photo gallery

    I dump a video one it paginates web to my computer, but when I pressed the refoulement of finishing on open in Photo Gallery and information that says appeared: Photo Gallery can't open this photo or video, but already look at the latest library updates and them has already, please tell me what can be the problem to perform a video? Thank you for your response.

    Hello andres acosta,

    Thank you for visiting the Microsoft answers Site.

    You can check that the videos or photos are in a supported file format.  Photo Gallery supports the following formats of photo file: JPEP, JFIF, TIFF, PNG, BMP, and of the WDP.

    If Windows Movie Maker is installed, Photo Gallery supports the following video file types: ASF, AVI, MPEG and WMV.

    You can also introduce below for more information about a similar issue:

    http://social.answers.Microsoft.com/forums/en-us/vistapictures/thread/24066109-3287-4839-B21a-7b28989e821a

    I hope this information is useful.

    Thank you

    Mary
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Newbie question - how to effectively check if photo is part of the selection

    Hi all

    Sorry for the newbie question, but I do not know how to solve, and I'm sure that there is a quick and easy answer to this:

    My goal is to get all the 'stack heads' (photos with Position 1 in batteries) selection ('photos' below).

    for I have, make photo in ipairs( photos )
    local date = picture:getFormattedMetadata("Filename")

    if Photo:getRawMetadata( "isInStackInFolder" ), then
     - Photo is in a stack
     local photoHeadOfStack = picture:getRawMetadata("topOfStackInFolderContainingPhoto")

    local stackPos = picture:getRawMetadata( "stackPositionInFolder" ), - get the position in the stack
     local photoHeadName = photoHeadOfStack:getFormattedMetadata("Filename")

    app:logVerbose(' Photo nb ^ 1, name ^ 2 is in a stack with the position ^ 3 ', i, date, stackPos"")

    if stackPos == 1 then
     - photo is the master of the battery
     stackTop[#stackTop+1] =photo
     app:logVerbose(' picture ^ 1 is the top of the stack ^ 2 ', date, #stackTop)

    -check if couple if it is correct
     elseif photos. photoHeadOfStack then
    app:logVerbose(' picture ^ 1 is in a stack, but not over the top. ") (Top of the stack already selected", date)

    other
    stackTop[#stackTop+1] =photoHeadOfStack
     app:logVerbose(' picture ^ 1 is in a stack, but not over the top. ") Top of the stack ^ 2 - ^ 3 ", date, #stackTop, photoHeadName)

    end
    end
    end


    In the if structure in the center of the Position in the stack control, if the Position is not 1, I would check if the photo to the stack ("photoHeadOfStack'") is part of the 'pictures '. I tried 'elseif photos.photoHeadOfStack then' and ' elseif photos [photoHeadOfStack] then ' but it doesn't work-> This elseif is never true even if 'photoHeadOfStack' part of the 'photos'.

    Any way to have this check done without checking the photos "manually"? (via e.g. a loop for)

    I'm sure that Lua offers this, but I do not know how...


    Thank you for your support!

        --[[ This code creates "stackTops", an array of LrPhotos that are the
    tops of all the stacks containing photos in the array
    "photos". ]]
stackTopSet = {}
for _, photo in ipairs (photos) do
    local stackTop = photo:getRawMetadata ("topOfStackInFolderContainingPhoto")
    if stackTop ~= nil then stackTopSet [stackTop] = true end
    end
stackTops = {}
for photo, _ in pairs (stackTopSet) do table.insert (stackTops, photo) end

  • The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette

    The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette.
    Help, please. I was unistalling firefox and reinstall them again at least 10 times, but still does not solve the problem

    This has happened

    Each time Firefox opened

    few days back

    User Agent

    Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; InfoPath.2)

    I have the same problem

    deleted expletives - Maurane

  • Why the message "this photo is unavailable"?

    My version of Skype: 7.0.80.102 (latest)

    Version of Win XP: 2002, Service Pack 3

    When I send or receive any image I get the msg "this photo is unavailable" (with a cross in the placeholder image)?

    I'm not fallen on any solution in this forum.

    ruwim mentioned that the problem depends on the version of IE.

    My version is 6.0.2900.5512.xpsp.080413 - 2111.

    Is there anyone who can help me with my problem?

    Update your Internet Explorer to the latest version of IE8 for Windows XP.

    http://filehippo.com/download_internet_explorer_xp

    Image files sent from older versions of Skype are always transferred by using the old method of transfer P2P.

    For the latest versions of Skype, transfer method is converted into Cloud Computing mode.

    http://community.Skype.com/T5/Windows-desktop-client/new-file-tranfers-disable-the-cloud/m-p/3795652

    Skype is highly dependent on the components of Internet Explorer installed on your computer and it is therefore important to have updated and installed the working version of IE.

    http://community.Skype.com/T5/Windows-desktop-client/help-Microsoft-account/m-p/3810401#M321805

  • "This photo is unavailable" @ WIN10 / EDGE v20.10240 / SKYPE 7.8.0.102

    I read about 50 same messages and same "solutions":

    1. Download latest Skype (or reinstall)

    2. Download latest IE (Edge)

    3 reset all settings / remove all your cache

    4. make sure that you use Skype even on both sides

    So now, I have the latest IE Windows, latest Skype, (Edge) and last nerve ventilation!

    WIN10 / EDGE v20.10240 / SKYPE 7.8.0.102

    As it becomes really VERY annoying problem. I hv summer use Skype for many years in my company, but we are seriously looking for alternatives now, as Skype is more and more problems, more it becomes bloated.

    However, I want to solve this problem for now. Anyone (even Skype support) any idea?

    1 million thanks!

    Ok. After much research I came across this post:

    http://community.Skype.com/T5/Windows-desktop-client/quot-this-photo-is-unavailable-quot/m-p/4070177

    Worked perfectly! Thank you!

  • How to fix the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette.

    I got the message "the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette. "When I click on Start, point to programs, point to Accessories, point to System Tools, and then click Activate Windows.

    Thank you!

    The question that I already fixed. As your mentioned before, I have download SensApi.dll and stuck to C:\WINDOWS\system32\.

    After that click on Start, run and type regsvr32 sensapi.dll and then press enter.

    Restart your computer, it works now from.

  • The application or DLL c:/progna~1/windows~3/datamngr/datamngr.dll is not a valid windows image. Please check this against you instattation disk

    I am havin problems with my computer, when I start my computer or open a page or try to download anything it comes so far... The application or DLL c:/progna~1/windows~3/datamngr/datamngr.dll is not a valid windows image. Please check this against you instattation disk... I have a lot of problems in trying to solve how to fix this, as I don't know that much about computers. and I don't have the installation disc, I use windows xp I would be great if someone could help me please thank you. Kayleigh lindsay

    It also suggests that you can not run a software antivirus... If this is something you need to heal very quickly.  However, installing an antivirus application - if your PC is already infected - is usually ineffective.

    I suggest you do the following-
    (1) download and run a full scan using the Scanner for Ms.  Available here: http://www.microsoft.com/security/scanner/en-us/default.aspx
    It does not install, is therefore more difficult for malware to block.
    (2) if that was clean, then get an anti-virus in real-time as soon as POSSIBLE.  There are many good choices (Norton, McAfee, etc.) which costs money, and several good without applications, including MS Security Essentials available here: http://windows.microsoft.com/en-US/windows/products/security-essentials
    Note!  If you have another antivirus installed, do not add MSE.  Run two at once is precarious - they will conflict with each other.
    Also, make sure that your windows firewall is turned on, or you have another 3rd party firewall installed.

  • I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image. Please check this against your installation diskette.

    I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image.  Please check this against your installation diskette.

    I went to the system registry to find the file it refers and is not a he.  I ran a norton registry cleanup and a virus scan.  I did find something online that made reference to this dll file.  The message appears at any time that I start a new program.  How to fix this, or find the virus that is the cause.

    A Google search for "[insert the name of the file]" grown up nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. You did not when you get the message. If it's only at startup, either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup. If you get the message during regular time on the computer and not not only at startup, your computer is still infected.

    Norton will do the job of cleaning and registry cleaners are garbage who at best will not do anything and the worst risk damage to your Windows installation.

    First of all, make sure that the computer is really free of virus/malware through these systematically - General malware removal steps http://www.elephantboycomputers.com/page2.html#Removing_Malware . Then, if the computer is really clean and you still receive the message, manage your Startup to remove the reference to the malware:

    Start > run > msconfig [Enter]

    This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

    How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

    The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
    MS - MVP - Elephant Boy computers - don't panic!

  • How can I actually email the scan, and how can I check this virus?

    SENDING A SCAN

    I am currently using Internet Explorer 8 and want to send someone using Internet Explorer 8

    How do I actually email the scan AND how can I check this virus

    Internet Explorer is a Web browser, not an e-mail program... To send messages, you need an e-mail account and the recipient needs an e-mail account. You need to know your email address and you must know the e-mail address of the recipient.
     
    Download and run the free versions of these two programs to check the software malicious & software unwanted spies.
     
     

  • Error - the application or DLL is not a valid windows image. Please check this against your installation diskette when trying to open a program or start the computer.

    Original title: bad image.

    I get two errors of bad image whenever I open a program or start a computer, for each program.  the error that says "the application or DLL is not a valid windows image. "Please check this against your installation diskette" I don't have any disk and don't know what to do.

    These file names, look a little suspicious and didn't get good Google search results, so I think that the first thing to do is to tell us a little about your system.  Now you can enjoy when you report a problem, provide you with any error messages you see and not a part of it (not paraphrase either).

    The second thing to do is to try to be reasonably sure that your system is free of malware and then if you have these problems, you can fix them (which would be the third thing to do).

    I still wonder why the Microsoft Support Engineer made you reference to an article that makes no sense at all...

    The first thing to do:

    Unfortunately, MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.

    Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

    Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

    Provide information on your system, the better you can:

    What is your system brand and model?

    Your system have IDE or SATA disks?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a working CD/DVD (internal or external) drive?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    The second thing to do:

    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    The third thing to do:

    Restart your computer and solve the outstanding issues.

  • Error "the application or DLL C;|WINDOWS\system32\NCObjAPI.DLL is not a valid Windows image. "Please check this against your installation diskette."

    Original title: lockout

    I get a black screen with the message from the application or DLL C;|WINDOWS\system32\NCObjAPI.DLL is not a valid Windows image. Please check this against your installation diskette.

    Hey Todd-Cindy-MorganBurris,

    1. Did you the latest changes on the computer?
    2. When was the last time it was working fine?
    3. You have security software installed on the computer?
    4. You are able to boot into Windows after the error message?

    Method 1

    If you are unable to boot into Windows then check if the problem persists in safe mode.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Method 2

    If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    Method 3

    If you can boot into safe mode and clean boot procedure don't help then I would suggest that scan you SFC on the computer that will search the corrupted system files and check if that helps.

    The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

  • The Application or DLL C;\program~1\Google\Google~1\Google62~1.DLL is not a valid Windows image. Please check this against your installation diskette.

    Original title: Please help

    The Application or DLL C;\program~1\Google\Google~1\Google62~1.DLL is not a valid Windows image. Please check this against your installation diskette.   I get this message all the time that I can still use my computer, but it is very annoying, I'd be very grateful for the help!

    Scan your computer with Malwarebytes. Get rid of AVG and get the free version of Avast (free if you can afford it). Get rid of Iobit. It doesn't help. Get rid of the advanced system of care. It will do more harm than good.

Maybe you are looking for