Checkdisk no longer works on a P2Ved NT 4

Similar Questions

• host process no longer works and removes my default printer

  Host process no longer works and removes my default printer.  I need to reinstall my printer software for vista down a few hours later.

  Hello

  -First check with the printer manufacturer for updated drivers and problems as well as their forums (if any).

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  If this did not help.

  I would REBOOT and when the computer stabilizes after a few minutes, and then remove the printer.

  Then REBOOT again and go through this troubleshooting and only after he re - install the
  printer. Be sure to install the latest drivers.

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  ===============================================================

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG, then post a list
  of these here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Startup Type
  (Registry/Startup folder), Command - Line String, the product name, file Version, company name,.
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse. This mouse works on another pc... I am getting error usb? I removed & charged all under the usb tab__

  My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse.   This mouse works on another pc... I am getting error usb?  I removed & charged all the usb tab

  Hello

  You may need assistance from a real store tech computer (no leeks and glances at a BestBuy or)
  other BigBox stores) or the manufacturer of your system Support.

  What is the error of USB?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Please make these now even though you might have tried this before:

  Remove the mouse if indicated in the Manager of devices - devices of score - click right on - UNINSTALL.

  Then lets refresh the USB stack

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• reboot no longer works on computer

  Don't know why, but when I click on reboot on my computer is no longer works, and sometimes closing does not work either... I have vista, everything has been updated, any suggestions?  Thank you!

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Error of libraries ' Documents.libraries - ms no longer works.

  Original title: Windows 8 libraries

  I can't access any of my documents or photos that I get the message ' Documents.libraries - ms no longer works. How can I find my files?

  Hello

  File Explorer - access

  User name 'C:\Users\"Your \Documents\Pictures.

  Search for the file Explorer, or it is available from the taskbar on the desktop - small file
  on the left.

  ==================================

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Windows key + X (or right click in the lower left corner) - (Admin) command prompt

  C:\Windows\System32\ >

  At the prompt, type in SFC/scannow above
  (There is a space between C and /)

  How to run the command "SFC/scannow" at startup or in Windows 8
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  -----

  Then run CheckDisk (chkfdsk/f/r)

  File (formerly Windows Explorer)

  Right click on drive C: - Properties - tab tools - error checking - Check

  Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  ------------

  You "May" have to run SHELL for Documents, images, or other system commands
  concerned files (perhaps all records of system under Documents such as images,)
  (Music, videos, Favorites, and other). It does not hurt to enter one if you are not sure
  It is needed. Separately enter the folder and the library if order and sequence

  do not import.

  List of Windows 8 and 8.1 Shell commands
  http://www.eightforums.com/tutorials/6050-shell-commands-Windows-8-a.html

  Open a command prompt (Admin) - Windows key + X - then issue orders required Shell
  one at a time and press on entry after each - you can copy and paste then in, and then press ENTER.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The keyboard and the mouse no longer works to update you Sierra

  Hello, I upgraded to OS Sierra and I began to spend more and suspending Notepad, then I do not recognize their keyboard and mouse notbook. It forces the walk outside and then worked, but after a few days I don't work any more.

  Thank you

  The keyboard and the mouse no longer works to update you Sierra

  Hi gnardone,

  Thanks for posting in the Community Support from Apple. I understand that you are having problems using your mouse and your keyboard after the update for Sierra. View the work of keyboard and mouse are crucial for your Mac, so I can understand how this is a problem for you. I'm happy to offer assistance.

  You are having problems with the keyboard and the trackpad that are part of your MacBook or you are having problems with a keyboard and an external mouse? I recommend taking a look at the article below.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected

  If you're still having trouble, let us know what kind of mouse and keyboard that you are having problems with and what you have tried to solve this problem.

  Best regards.

• Dictionary widget no longer works

  The Dictionary widget no longer works after upgrade to "Sierra". It is extremely annoying, since I am a professional translator and use this widget all the time. Does anyone know if there is a solution to this?

  Best regards

  Ran into the same issue. It seems that Sierra is not any dictionaries installed. Start the Dictionary application and download the dictionaries that it provides. Once completed restart your machine or simply kill the process dashboard. The Dictionary widget will be fully functional.

• Thunderbolt manual bridge IP no longer works with Sierra

  I use a Thunderbolt bridge with manual IP connection to connect 3 mac to my main MacPro, since the update of Sierra I can't connect one of the mac via the manual / plus static IP.

  Please HELP, am I missing something? It has worked before and now it no longer work.

  Joe

  Anyone?

  My work is stationary, and my staff is looking at me.

  Help, please!

  I also note that since the Sierra update whenever I connect to the server via the LAN cable or stroke, it appears this box, -that use only to appear only once (when I put in place) and hten again, unless I have re - install the operating system.

  Perhapse it is a new way to set up an IP Maunaul or I've never done right. Help, please.

  I pay my staff to do nothing right now.

• VPN access no longer works after upgrade from 10 IOS!  Any input to fix?

  VPN access no longer works after update IOS 10!  With the help of an iPhone 5 or 6, our employees use their hotspot phone to connect to our VPN.  Suddenly, he broke Monday after the upgrade to IOS 10.  We have experienced many versions of IOS, and it has always worked.  Any patch available?

  Hello howlindaug,
  Thank you for using communities of Apple Support.

  If I understand your message that your employees will no longer be able to connect to your virtual private network with their iPhone 5 or 6 after the upgrade to iOS 10. Sierra Mac OS and iOS 10 delete a VPN profile PPTP connections when a user upgrades from their device. If your VPN is a PPTP connection, you'll want to use one of the options listed in the section below:

  Prepare for removal of PPTP VPN before upgrade you to iOS 10 and macOS Sierra
  

  Alternatives for PPTP VPN connections

  Try one of these other VPN protocols for authentication by user that are safer:

  • L2TP/IPSec
  • IKEv2/IPSec
  • Cisco IPSec
  • VPN SSL clients on the App Store, such as those of AirWatch, Aruba, Check Point, Cisco, F5 Networks, MobileIron, NetMotion, Open VPN, Palo Alto Networks, Pulse Secure and SonicWall

  Best regards.

• HP Photosmart C8100 upgrade to Mac OS Sierra Scanner no longer works.

  After that, I'm going to macOS Sierra my HP Photosmart C8100 Scanner no longer works.

  I had try HP they don't site any upgrade in the Sierra. I get my scanner to work.

  I do not have this as a new printer/scanner each time new software upgrade of the Mac computer.

  It sounds like Hello multifunction.

  Have you tried to install the HP drivers, reboot, then delete and add the printer again?

• copy paste no longer works

  Copy paste no longer works after update macOs Sierra...

  Any idea?

  THX Andrew

  Try stopping and restarting your machine

• Two-finger scroll is no longer work

  Updated for Sierra yesterday. Two fingers scrolling is no longer works. Called AppleCare. They suggested that I re - install. That didn't fix it. (Already zapped the P - RAM... and did another reboot with some keys used.)

  The next option that was recommended was to delete my preferences file. Who's going to lose ALL my connections and other preferences so I'm not ready to do it again.

  Have not seen other examples of what is happening (except here which mentions three fingers slide...)

  Any ideas?

  Thank you.

  Solved. Unchecking and then scrolling control in the accessibility preferences window (mouse and Trackpad, Trackpad options) did it. Yay.

• Start Screen Saver hot corner no longer works under macOS Sierra 10.12

  I use Active corners to allow my screen saver lock my screen forever.  The hot corner "Start screen saver" no longer works after upgrade to Sierra 10.12.  'Put display to Sleep' hot corner doesn't work, as do other things like "Disable screensaver" and "Launchpad".  I tried reversing the triggers and active corners and can confirm that four corners work, but none of the corners can trigger action to launch the screensaver.

  try restarting. works fine for me.

• After installing iOS 9.3.4 audio accessories / load is no longer work with iPhone 6s

  Reference: iPhone 6s with iOS 9.3.4 and Pro iPad with iOS 9.3.4

  Colleagues:

  After the installation of the audio 9.3.4, iOS and other accessories is no longer worked / accused with the iPhone 6 g & iPad Pro.  Before the update of iOS, all accessories worked exceptionally well with the iPhone 6 g & iPad Pro.

  So far, Accessories Bluetooth will continue to operate with few problems.

  Please advise and assist the...

  It would be useful that you said what accessories do not work and what troubleshooting steps you have already done.

• My turn/orientation no longer works on my iPad 2 since the last update.

  MY orientation/rotation no longer works on my iPad 2 since the last update.  I have

  turned to focus on, and power off, then on again, but my screen remains locked.  I also went to the settings and turned on and off, and then on new orientation, but the screen is always locked. What can I do?

  Try to hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

  If that doesn't help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the data if possible. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

  If the steps above do not help, you may need to test in an Apple store.