CheckSUR Log - load useful files missing, nowhere to be found.
Hi all
Please check the log file CheckSUR below. He mentions four payload files that are missing, and I can't find these anywhere (there are more, but I could find others on)
other computers; I ran the system update tool several times). Please let know us where I should look for these four.
Thank you, Denis.
PS The system is Windows 7 Enterprise 64 bit on a Dell PC Optiplex 9010
========================================================
=================================
Preparation of control system was updated.
Binary version 6.1.7601.22471
Version of the package 26.0
2016-09-19 23:30
Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
Control components store
(f) CSI Payload file missing 0 x 00000000 auditpol.exe.mui amd64_microsoft-windows-m... ditevtlog.resources_31bf3856ad364e35_6.1.7601.23452_he - il_9f2a4f1263240fd7
(f) CSI Payload file missing 0 x 00000000 lsasrv.dll.mui amd64_microsoft-windows - lsa.resources_31bf3856ad364e35_6.1.7601.23452_he - il_cbcc7f709fe30031
(f) CSI Payload file missing 0 x 00000000 amd64_microsoft-windows-c certcli.dll.mui... ityclient.resources_31bf3856ad364e35_6.1.7601.23452_he - il_a9e40209a91c623d
(f) CSI Payload file missing 0 x 00000000 certcli.dll.mui x86_microsoft-windows-c... ityclient.resources_31bf3856ad364e35_6.1.7601.23452_he - il_4dc56685f0bef107
Summary:
Seconds executed: 910
To avoid confusion & duplication of effort, please post any/all further follow-up in replies to your TechNet thread => https://social.technet.microsoft.com/Forums/windows/en-US/6a892abf-4d22-4610-889e-6c2788e8cc58/checksur-log-missing-payload-files-nowhere-to-be-found?forum=w7itproinstall#8ddf7192-b833-462a-a085-cc484bf21e0f
Tags: Windows
Similar Questions
-
I get 0 x 80070246 errors when you try to install SP1 for Vista Home Premium.
After you run the system update readiness tool, I found the following errors in my CheckSUR.log
=======================================================
Preparation of control system was updated.
Binary version 6.0.6002.22202
Package Version 6.0
2009-10-09 19:13Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
Control components store
(f) clear CSI missing 0x00000002 WinSxS\Manifests\x86_microsoft-windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest x86_microsoft-windows - msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en - us_37881fc949e23021
(f) CSI Payload file missing 0 x 00000000 jscript.dll x86_microsoft-windows-writing of scripts - jscript_31bf3856ad364e35_6.0.6002.22146_none_852abf080d834b3eSummary:
Seconds executed: 1221
Found 2 errors
CSI shows lack Total count: 1
CSI Payload file lack Total count: 1Unavailable repair files:
winsxs\manifests\x86_microsoft-Windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest=======================================================
The newspaper CBS.log itself has several types of mistakes, too. Here are some samples:
-Errors 'M²;
2009-10-09 21:10:27, info CBS SPI: from SPInstall
2009-10-09 21:10:27, info CBS SPI: could not start the etl newspaper. Continue without. HR: 0 x 80070020
2009-10-09 21:10:27, info CBS SPI: wave 0 detected
2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
2009-10-09 21:10:27, info CBS SPI: spent before due diligence
2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
2009-10-09 21:10:27, info CBS SPI: M² is not included in
2009-10-09 21:10:27, error CBS could not initialize wrapper M²
2009-10-09 21:10:27, error CBS could not define M² by default LCID of the system value-"Could not find the CixTarget Molok" errors.
2009-10-09 21:29:25, CBS Plan info: package: Package_6_for_KB954366 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3, updated: 954366-50_neutral_GDR, current: installed, pending: the default start: installed, planned: installed, targeted: installed, limit: installed, selected: default
2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_server ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109
2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_sc ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109-"ILLEGAL_CHARACTER" and more "Sqm" errors-
2009-10-09 21:30:04, error CSI 00000022@2009/10/10:01:30:04.150 (F) d:\longhorn\base\lstring\lblob.cpp(2217): native STATUS_ILLEGAL_CHARACTER error of the function RtlTranscodeLBlobs expression: __rv. UcsCharacter! = (0xffffffff)
[gle = 0 x 80004005]
2009-10-09 21:30:21, error CSI 00000023 (F) HRESULT_FROM_WIN32 (582) #489176 # to Windows::ServicingAPI:CCSITransactionAnalysis_ICSIInventory:EnumDeploymentReferences(flags_=_00000003,_tlcid_=_@0x655fac0,_pszSubscription_=_(null), pszCodebase = (null))
[gle = 0 x 80070246]
2009-10-09 21:30:21, CBS WER info: generate report of failure for the package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, status: 0 x 80070246, source of failure: other CBS, start state: 0, target State: 4
2009-10-09 21:30:26, information CBS Exec: comprehensive treatment. Session: 30034248:1278646622, package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, hr: 0 x 80070246
2009-10-09 21:30:26, State of the information system sleep restored CBS block: 0x80000000
2009-10-09 21:30:26, CBS Session information: 30034248:1278646622 finalized. Reboot required: no
2009-10-09 21:31:30, CBS briefing: initialized 30034249:1690541326.
2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:31, CBS Session info: 30034249:1690541326 finalized. Reboot required: no
2009-10-09 21:31:31, error CBS doesn't have value of M² for the time of the scene
2009-10-09 21:31:31, error CBS doesn't have the m value for the build number
2009-10-09 21:31:38, CBS Session info: 30034249:748895326 finalized. Reboot required: no
2009-10-09 21:31:41, info CBS SPI: cannot install MS using the user interface. HR 0 x 80070246
2009-10-09 21:31:41, info CBS SPI: SPInstall terminating, return code 0 x 246
2009-10-09 21:31:41, error CBS didn't M² value for parameters
2009-10-09 21:31:41, error CBS failed to set exit code value M²
2009-10-09 21:31:41, error CBS didn't M² for the SKU value
2009-10-09 21:31:41, error CBS doesn't have the m value for the build number------------------------------------------------
I don't understand exactly how errors in the two newspapers are related, but my opinion is that, if I can solve my CheckSUR.log errors, CBS.log errors will disappear to, and then I might even be able to install SP1.
Any help that can be provided would be greatly appreciated.
1 person needs an answer
For what is interesting, what I ended up doing to solve my problems was to re - install Vista with the 'upgrade' option, so I don't lose any of my files or desktop settings...
After that, I had a few problems with my OS reinstalled with several (80 +) updates, SP1 and SP2 from catching up. But overall these problems were minor compared to it, that I lived just to fix some missing files.
-
Here's my question after tons of research and test without have the right solutions.
Target:
(1) I have a 12.1.0.2 database unique main enterprise 'testdb' as database instance running on the server "node1".
(2) I created physical standby database "stbydb" on the server "node2".
(3) DataGuard running on the mode of MaxAvailability (SYNC) with roll forward in real time 12 default c apply.
(4) primary database has 3 groups of one-man redo. (/oraredo/testdb/redo01.log redo02.log redo03.log)
(5) I've created 4 standby redo logfiles (/oraredo/testdb/stby01.log stby02.log stby03.log stby04.log)
(6) I do RMAN backup (database and archivelog) on the site of relief only.
(7) I want to use this backup for full restore of the database on the primary database.
He is a DR test to simulate the scenario that has lost every primary & Eve total servers.
Here is how to save, on the database pending:
(1) performance 'alter database recover managed standby database Cancel' to ensure that compatible data files
(2) RMAN > backup database;
(3) RMAN > backup archivelog all;
I got elements of backup and copied to primary db Server something like:
/Home/Oracle/backupset/o1_mf_nnndf_TAG20151002T133329_c0xq099p_.BKP (data files)
/Home/Oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.BKP (spfile & controlfile)
/Home/Oracle/backupset/o1_mf_annnn_TAG20151002T133357_c0xq15xf_.BKP (archivelogs)
So here's how to restore, on the main site:
I clean all the files (data files, controlfiles oder all gone).
(1) restore spfile from pfile
RMAN > startup nomount
RMAN > restore spfile from pfile ' / home/oracle/pfile.txt' to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';
(2) modify pfile to convert to db primary content. pFile shows below
*.audit_file_dest='/opt/Oracle/DB/admin/testdb/adump '
* .audit_trail = "db".
* full = '12.1.0.2.0'
*.control_files='/oradata/testdb/control01.ctl','/orafra/testdb/control02.ctl'
* .db_block_size = 8192
* .db_domain = "
*.db_file_name_convert='/testdb/','/testdb /'
* .db_name = "testdb".
* .db_recovery_file_dest ='/ orafra'
* .db_recovery_file_dest_size = 10737418240
* .db_unique_name = "testdb".
*.diagnostic_dest='/opt/Oracle/DB '
* .fal_server = "stbydb".
* .log_archive_config = 'dg_config = (testdb, stbydb)'
* .log_archive_dest_2 = "service = stbydb SYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = stbydb'"
* .log_archive_dest_state_2 = 'ENABLE '.
*.log_file_name_convert='/testdb/','/testdb /'
* .memory_target = 1800 m
* .open_cursors = 300
* runoff = 300
* .remote_login_passwordfile = "EXCLUSIVE."
* .standby_file_management = "AUTO".
* .undo_tablespace = "UNDOTBS1.
(3) restart db with updated file pfile
SQLPLUS > create spfile from pfile='/home/oracle/pfile.txt'
SQLPLUS > the judgment
SQLPLUS > startup nomount
(4) restore controlfile
RMAN > restore primary controlfile to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';
RMAN > change the editing of the database
(5) all elements of backup catalog
RMAN > catalog starts by ' / home/oracle/backupset / '.
(6) restore and recover the database
RMAN > restore database;
RMAN > recover database until the SNA XXXXXX; (this YVERT is the maximum in archivelog backups that extends beyond the scn of the backup of the data file)
(7) open resetlogs
RMAN > alter database open resetlogs;
Everything seems perfect, except one of the file log roll forward pending is not generated
SQL > select * from v$ standby_log;
ERROR:
ORA-00308: cannot open archived log ' / oraredo/testdb/stby01.log'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
no selected line
I intended to use the same backup to restore primary basic & helps record traffic and the downtime between them in the world of real output.
So I have exactly the same steps (except STANDBY restore CONTROLFILE and not recover after database restore) to restore the database pending.
And I got the same missing log file.
The problem is:
(1) complete alert.log filled with this error, not the concern here
(2) now repeat it in real time apply won't work since the Party shall LGWR shows always "WAITING_FOR_LOG."
(3) I can't delete and re-create this log file
Then I tried several and found:
The missing standby logfile was still 'ACTIVE' at present RMAN backup was made.
For example, on db standby, under Group #4 (stby01.log) would be lost after the restoration.
SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;
GROUP # SEQUENCE # USED STATUS
---------- ---------- ---------- ----------
4 19 ACTIVE 133632
5 0 0 UNASSIGNED
6 0 0 not ASSIGNED
7 0 0 UNASSIGNED
So until I take the backup, I tried on the primary database:
SQL > alter system set log_archive_dest_state_2 = delay;
This was the Group of standby_log side Eve #4 was released:
SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;
GROUP # SEQUENCE # USED STATUS
---------- ---------- ---------- ----------
4 0 0 UNASSIGNED
5 0 0 UNASSIGNED
6 0 0 not ASSIGNED
7 0 0 UNASSIGNED
Then, the backup has been restored correctly without missing standby logfile.
However, to change this primary database means break DataGuard protection when you perform the backup. It's not accept on the production environment.
Finally, my real questions come:
(1) what I do may not do on parameter change?
(2) I know I can re-create the control file to redo before delete and then recreate after. Is there any simple/fast to avoid the standby logfile lost or recreate the lost one?
I understand that there are a number of ways to circumvent this. Something to keep a copy of the log file waiting restoration progress and copy up one missing, etc, etc...
And yes I always have done no real-time applies "to the aid of archived logfile" but is also not accept mode of protection of production.
I just want proof that the design (which is displayed in a few oracle doc Doc ID 602299.1 is one of those) that backs up data backup works effectively and can be used to restore the two site. And it may be without spending more time to resume backups or put the load on the primary database to create the database before.
Your idea is very much appreciated.
Thank you!
Hello
1--> when I take via RMAN backup, RMAN does not redo log (ORL or SRL) file, so we cannot expect ORLs or SRL would be restored.
2nd--> when we opened the ORL database should be deleted and created
3rd--> Expecting, SRL should not be an issue.we should be able to do away with the fall.
DR sys@cdb01 SQL > select THREAD #, SEQUENCE #, GROUP #, STATUS from v$ standby_log;
THREAD # SEQUENCE # GROUP # STATUS
---------- ---------- ---------- ----------
1 233 4 ACTIVE
1 238 5 ACTIVE
DR sys@cdb01 SQL > select * from v$ logfile;
GROUP # STATUS TYPE MEMBER IS_ CON_ID
---------- ------- ------- ------------------------------ --- ----------
3 /u03/cdb01/cdb01/redo03.log no. 0 online
/U03/cdb01/cdb01/redo02.log no. 0 2 online
1 /u03/cdb01/cdb01/redo01.log no. 0 online
4 /u03/cdb01/cdb01/stdredo01.log WATCH No. 0
/U03/cdb01/cdb01/stdredo02.log EVE 5 No. 0
DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log
method: cannot access the /u03/cdb01/cdb01/stdredo01.log: no such file or directory
DR sys@cdb01 SQL >! ls - ltr /u03/cdb01/cdb01/stdredo02.log
-rw - r-. 1 oracle oinstall 52429312 17 Oct 15:32 /u03/cdb01/cdb01/stdredo02.log
DR sys@cdb01 SQL > alter database force claire logfile 4;
change the database group claire logfile 4
*
ERROR on line 1:
ORA-01156: recovery or current flashback may need access to files
DR sys@cdb01 SQL > alter database recover managed standby database cancel;
Database altered.
DR sys@cdb01 SQL > change the database group claire logfile 4;
Database altered.
DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log
-rw - r-. 1 oracle oinstall 52429312 17 Oct 15:33 /u03/cdb01/cdb01/stdredo01.log
DR sys@cdb01 SQL >
If you do, you can recreate the controlfile without waiting for redo log entry...
If you still think it's something is not acceptable, you must have SR with support to analyze why he does not abandon SRL when controlfile_type is "underway".
Thank you
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?
I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7. Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.
I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.
Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA
OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K
keimanzero,
Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.
Secondly, I suggest that you run the File Checker system while in the same clean boot state.
To run the System File Checker tool, follow these steps:- Click Start and type cmd in the field search programs and files .
- Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.If you are prompted for an administrator password or a confirmation, type your password or click on continue.
- At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:sfc/scannow
When the analysis is complete, test to see if the problems facing the system have been resolved.
If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.
Expert MowGreen Windows IT Pro - consumer safety
-
I download upgrade assets 13, items 9, 2 files to download, after that 1 of the 2 loaded 2nd file will not download message indicates that the part of the Archives of photoshop 13 is missing. you need all parts in the same folder. What should do?
You can also try to download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
-
Files redo log by using the optimal_logfile_size to design view.
Concerning
I have a specific question about the size of the log file. I have deployed a database of test and I was exploring some aspects regarding the selection of the optimal size of recovery for performance logs by using the view v$ instance_recovery optimal_logfile_size. My main goal is necessary for example to reduce the bytes redo recovery. Currently I have not been able to optimize the size of redo log file. Here are the steps I followed: -.
In order to use the view v$ instance_recovery, I had to put the fast_start_mttr_target parameter which is by default do not then I did as follows: -.
(1) SQL > sho parameter fast_start_mttr_target;
VALUE OF TYPE NAME
------------------------------------ --------------------------------- ------------------------------
fast_start_mttr_target integer 0
(2) setting the fast_start_mttr_target requires destroy deferred to the following parameters: -.
SQL > show parameter log_checkpoint;
VALUE OF TYPE NAME
------------------------------------ --------------------------------- ------------------------------
log_checkpoint_interval integer 0
log_checkpoint_timeout around 1800
log_checkpoints_to_alert boolean FALSE
SQL > select ISSES_MODIFIABLE, ISSYS_MODIFIABLE, ISINSTANCE_MODIFIABLE, ISMODIFIED parameter of $ v where name like 'log_checkpoint_timeout;
ISSES_MODIFIABL ISSYS_MODIFIABLE ISINSTANCE_MODI ISMODIFIED
--------------- --------------------------- --------------- ------------------------------
IMMEDIATE FALSE TRUE FALSE
SQL > alter system set log_checkpoint_timeout = 0 scope = both;
Modified system.
SQL > show parameter log_checkpoint_timeout;
VALUE OF TYPE NAME
------------------------------------ --------------------------------- ------------------------------
log_checkpoint_timeout integer 0
(3) setting fast_start_mttr_target now
SQL > select ISSES_MODIFIABLE, ISSYS_MODIFIABLE, ISINSTANCE_MODIFIABLE, ISMODIFIED parameter of $ v where name like 'fast_start_mttr_target;
ISSES_MODIFIABL ISSYS_MODIFIABLE ISINSTANCE_MODI ISMODIFIED
--------------- --------------------------- --------------- ------------------------------
IMMEDIATE FALSE TRUE FALSE
Definition of the fast_mttr_target to 1200 = 20 minutes of the control point of switching on the recommendation of the Oracle
Ask the view v instance_recovery $
(4) SQL > select ACTUAL_REDO_BLKS, TARGET_REDO_BLKS, TARGET_MTTR, ESTIMATED_MTTR, OPTIMAL_LOGFILE_SIZE, CKPT_BLOCK_WRITES from v$ instance_recovery;
ACTUAL_REDO_BLKS TARGET_REDO_BLKS TARGET_MTTR ESTIMATED_MTTR OPTIMAL_LOGFILE_SIZE CKPT_BLOCK_WRITES
---------------- ---------------- ----------- -------------- -------------------- -----------------
276 165888 * 93 * 59 361 16040
Here target MTTR was 93 so I put the fast_mttr_target to 120
SQL > alter system set fast_start_mttr_target = 120 scope = both;
Modified system.
The size of the log file suggested by v$ instance_recovery is now 290 MB
SQL > select ACTUAL_REDO_BLKS, TARGET_REDO_BLKS, TARGET_MTTR, ESTIMATED_MTTR, OPTIMAL_LOGFILE_SIZE, CKPT_BLOCK_WRITES from v$ instance_recovery;
ACTUAL_REDO_BLKS TARGET_REDO_BLKS TARGET_MTTR ESTIMATED_MTTR OPTIMAL_LOGFILE_SIZE CKPT_BLOCK_WRITES
---------------- ---------------- ----------- -------------- -------------------- -----------------
59 165888 93 59 290 16080
After you change the size of the logfile to 290 as indicated below by v$ log view;
SQL > select GROUP #, THREAD #, SEQUENCE #, BYTES of the log v$.
GROUP # THREAD # SEQUENCE # BYTES
---------- ---------- ---------- ----------
1 1 24 304087040
2 1 0 304087040
3 1 0 304087040
4 1 0 304087040
(5) after you change the size, I observed the anomaly as redo log blocks to be applied for the recovery went to * $ 59 to 696 * v instance_recovery view is now also now offers the size of the log file of * 276 MB *. Have I misunderstood something
SQL > select ACTUAL_REDO_BLKS, TARGET_REDO_BLKS, TARGET_MTTR, ESTIMATED_MTTR, OPTIMAL_LOGFILE_SIZE, CKPT_BLOCK_WRITES from v$ instance_recovery;
ACTUAL_REDO_BLKS TARGET_REDO_BLKS TARGET_MTTR ESTIMATED_MTTR OPTIMAL_LOGFILE_SIZE CKPT_BLOCK_WRITES
---------------- ---------------- ----------- -------------- -------------------- -----------------
* 696 * 646947 120 59 * 276 * 18474
If please specify the output above, that I'm unable to optimize the size of the log file and have not been able to achieve the goal of reducing the redo log blocks to apply for recovery, any help is appreciated in this regard.I don't think that test for the optimum size of redo's CTD. Maybe if you did each week, as a regular or something, but the unique initial setup and sometimes check in production? N ° but it will be iterative as part of a deployment of init.ora Exchange.
In addition, it is part of the DBA job to understand the recovery and what to expect. Which includes the understanding of all these parameters, init and tests for the environment. It also includes an understanding of the characteristics of the application and its load.
-
Load a file in tiara with a use using LabVIEW
Is it possible to load a file into tiara with a use that is customized by using LabVIEW. I looked through the palette and see nothing.
Hi Siriusly,
I've added 2 additional lines of configuration of trainer to the use, and now that the last row of empty values has disappeared from a single file you sent me.
Brad Turpin
Tiara Product Support Engineer
National Instruments -
Load image into ImageView using file:///
Hello
According to this article http://supportforums.blackberry.com/t5/Cascades-Development-Knowledge/The-Different-Methods-of-Loadi... we should be able to load images QML using file:/// and absolute path.
For the life of me I can't load an image not only of shared/accounts/1000/shared/subfolders, but even of the application data folder.
Can someone share * work * example of loading images in ImageView using file:///
Thank you.
https://developer.BlackBerry.com/Cascades/documentation/UI/Image_Resources/content.html
-
When I down loaded a file have icon as the sample images I cannot use them separately. The purchased version will allow mw to do?
Yes, you should be able to edit it in Adobe Illustrator.
-
Failed to load several files to Essbase using generics and MaxL characters
I have several data files to load:
Files:
Filename.txt
Filename_1.txt
Filename_2.txt
According to the following link, Essbase is able to load several files to the BSO via MaxL databases using wildcards:
http://docs.Oracle.com/CD/E17236_01/EPM.1112/esb_tech_ref/frameset.htm?launch.html
However, when I try to run the following, I get the following error:
MaxL:
import data from database MyApp.DB of data_file text Server "... /.. '. /MyApp/filename*.txt' using the rules_file server 'L_MyRule' error add to '\\Server\Folder\L_MyRule.err ';
Error:
ERROR - 1003027 - failed to open file [DB01/oracleEPM/user_projects/epmsystem2/EssbaseServer/essbaseserver1/app/MyApp/DB /... /.. / Filename*.txt].
ERROR - 1241101 - Essbase unexpected error 1003027.
I can run the following fine without any problems, but it deals only with the first of several files, and I'd rather not hardcode several files as the number may vary in the future:
MaxL:
import data from database MyApp.DB of data_file text Server "... /.. '. ' / MyApp/Filename.txt "using Server rules_file error ' L_MyRule' add to '\\Server\Folder\L_MyRule.err ';
Any ideas? And what about ASO databases?Good point John, concatenate the files don't get you all that. Not sure about post of James it is fair after the wildcard for the usability or performance option.
-
How can I dynamically load swc files using as3? (without relying on the Flash IDE).
The SWF file can be used in the same way as the CFC, which means that you don't need to "visually show" anything when it is loaded. Your code can use the classes and assets incorporated into the SWF, just as a SWC file. So if someone just to load the SWF file to see what was in it that they see nothing. They could however access programmatically to what anyone on the inside just like you, if they went to that level. But it is not as easy as just racing as SWF to see what is inside.
I hope that all packaging several separate sovereigns will allow you to load and unload only what you need to keep the RAM usage as low as possible with a minimum load SWF.
If you are ready, please mark all useful/correct so we can filter without response. You're welcome and good luck!
-
Loading multiple files using the same interface in ODI
Hi all
We load multiple files using the same interface and get the error "java.sql.SQLException: ORA-00942: table or view does not exist" while inserting record in the staging table. It looks like the same temporary table is used when loading multiple files and the error. Grateful if someone offers a solution to avoid this error.
We use the following KMS:
(1) LKM SQL file
(2) IKM Oracle SQL COMMAND append.
Receive a quick response.
Thank you
RPHello
See this http://odiexperts.com/interface-parallel-execution-a-new-solution
Thank you
Fati -
How to load several files DBF table 1 target using only 1 interface?
Hello, I am a beginner in ODI and I have a problem.
I have several DBF / Foxpro files that is stored in a directory like this:
2010_10/account.dbf
2010_11/account.dbf
All DBF files have the same structure, but stored in a different folder (the folder name is < year > _ < month >)
I managed to create an interface to load a DBF unique for the target table and the source table is hardcoded in the interface. Ideally, the interface will take place once a month.
How can I use the same interface to load other DBF files?
I know, if the data source is a text file, you can link the resource name to a variable, and the variable can be set to a file name. But I can't do since I use a JDBC driver to connect to the DBF file.
Any help will be appreciatedHello
I have no idea on the DBF files, yet...
What is create a variable to build the 'months' and then pass this variable to OdiFileCopy, move this file to a specific directory. Then run your interface to load this file into your database. Once the work is successful, you can delete the file using OdiFileDelete (optional)
Thank you
Fati -
How to load a file by using unique code for the table values
Hi Experts,
I'm loading the file to Table data.
In the file, I will have values such as as follows
ABC = 1234; XYZ = 5627; NAME = Chavigny
ABC = 1254; XYZ = 5684; NAME = riadh
ABC = 1235; XYZ = 5524; NAME = Nani
How to approach this kind of needs in ODI.
THX,
Sara.No problem here because we does not specify the third parameter (limit) of SUBSTR.
Then it just starts after EMPNO = and will go until the end, regardless of how many characters you have after EMPNO =.If you want to replace:
REPLACE(
. , ' ') It will replace all the occurrence of EMPNO = in the chain.
-
How to load several files column data into essbase using the rule of load.
Hello
I need to load a file of data into essbase, which includes data from several columns.
Here is a sample file.
Year, Department, account, Jan, Feb, Mar, Apr, may, June, July, August, Sept, Oct, Nov, Dec
FY10, ministere1, account1, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
FY10, agencies2, account1, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
FY10, ministere3, account1, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
Thank you
SirotBut this isn't an error as such, that is to say that no data values have been changed so that they possible already exist in the database.
If there is no release, they should be in a file of errors.See you soon
John
http://John-Goodwin.blogspot.com/
Maybe you are looking for
-
Yesterday, I got a new HP Premium. After unpacking, I pressed THE button, but the calculator does not work. I loaded the computer thinking that is a problem of low battery, but when the USB loader are connected the them turns on and works. Unfortunat
-
Blue contours appeared and I can't control my iphone 5 s. I can't go to settings. I triple click on the button "home" and gives a message to go into settings and enter the password but I can't get to the settings. What does not work? Thank you
-
HP Pavilion 15 laptop-n096ea - SATA speed?
HI guys,. Hoping for a little help, I searched here and google but can't find the answer if nobody knows the SATA speed for this laptop ((SATA I II III)) Thanks for the help Rich
-
Issues of device after installing Windows 7 driver
I did a clean install and now my drivers do not work. I can't even a network connection, because the network driver could not be found. I can't find what use my backup drive.it has been named D:\ now my cd/dvd drive is named D:\ im so lost! Thank you
-
termination of VPN client 4.0 on pix 515
I am trying to connect the cisco 4.0 vpn client to a worm of pix 515 6.1 and receive as a result of errors that I guess are the related hashing algorithm but am not sure. Only DES is not enabled 3DES. Config output Cisco post interprets but apparentl