Chinese/Japanese/Korean characters not correctly displayed on Skype 5.5?

Similar Questions

• List of the albums of songs is not correctly displayed on any iPad

  I noticed that the list of Top songs is not correctly displayed on any of our Ipads, but it is on the iPhones.

  Please see the image below.

  

  It should be "Best songs" in the upper left corner, and where the 2 circles broken are inside should be read (Top Songs) & (Top Albums) in a border, like the other lists.  Because these buttons are missing, I can't use this list.

  I have a family membership to the apple's music, and the problem occurs on 4 separate Ipads, with 4 separate apple ID's

  I erased and reset the ipad, and to restart the problem is solved, however as soon as I finish the music to apple and then soft reboot the problem recurs.

  Anyone else have this or have any ideas?

  I have the same problem and not a clue how to solve this problem:

  Button of the top missing graphics on iPad.

  I guess it's a popular bug...

• Acer site does not correctly display the specification.

  Acer site does not correctly display the specification.

  Example when you click on the link on M5 Explorer - 581 T-6405 please as to the specification of the model of S7-191-6447. Please check

  Thank you bring to our attention. We will ensure that it is transmitted.

• Canon 5 d images are not correctly displayed in the develop module, they look posterized or something. They look fine in the library module, what happens?

  Canon 5 d images are not correctly displayed in the develop module, they look posterized or something. They look fine in the library module, what happens?

  Try turning off the GPU. Go in Edition > Preferences > Performance (Lightroom > preferences > Performance on a Mac) and uncheck the box use Graphics Processor.

• Change is not correctly displayed in the develop Module

  When I make a change in the develop Module, changes are not correctly displayed in the main window and the browser window becomes gray. When I get back to the library Module, the changed image appears correctly. Then when I get back to the develop Module, the changes appear correctly. I followed the troubleshooting steps and a single point Adobe says that the permissions of the user is perhaps not good. I created a new user, and in the new user profile, LR works as it should. I use Windows 7. What should I change in the old "user permissions" to match the new "user permissions"? I prefer to delete the new user, rather than recreate my environment all over again.

  If you see gray windows to develop, it is almost generally a bad monitor profile in Windows. Unfortunately quite common. You should recalibrate the monitor. If you do not have a calibrator, try to go into the properties of your screen pane. Go to the color management tab and remove any profile associated with the parser.

• Animation is not correctly displayed in Firefox

  My animation is not correctly displayed in Firefox. Have searched this forum and others, I am only able to find solutions exceeded (such as the update to the latest version of Animate). I'm on the later versions of Animate and Firefox and still problems. Anyone know of a solution to this, or can I directly me to a discussion which has already covers it?

  One interesting thing to note is that only the tree Centre is differently, the commands for each seem to be the same. The small mountains are also fine, but not Mount Rainier.

  Here is my test page:

  http://jonnyart.com/test/NewYearsAnimation

  Thank you!

  In case someone else runs into this problem, I was able to solve it by rebuilding portions of the animation.

• Edited in Photoshop does not correctly display in Lightroom after recording the images

  Hello

  I recvently EU cloud Adobe and upgraded from Lightroom 3 or 4.  Since the upgrade I had problems with Lightroom not correctly display images edited in Photoshop.  Instead of the photoshop image, it creates a new jpeg image and appears in the library.  the PSD is not loaded into the library.

  I take a jpeg image of my library and shoosing the change based on Photoshop.  By selecting Edit a copy, I'm tried with the original and edit a copy with lightroom adjustments as well as with the same results.

  In Photoshop, I duplicate the base layer, the image upscaling, running some filters, addition of volunteering adjustment layers.

  I save the image in Photoshop format in the original folder where the original jpeg was in the Lightroom library.  I record with maximize compatibility on.

  When I return to Lightroom, the catalog displays the two files, the original jpeg and a copy identical to it, NOT the new file in photoshop with alterations.  If I go in the folder images occupy in the Finder using the Finder command show two images link to the same original jpeg format.  The modified file to photoshop is there in the folder but does not appear in Lightroom unless I drag and drop it.

  I've disabled all the filters and ensured that the sort is sort by name.  The image does not automatically appears in Lightroom after mounting.  Any suggestions?

  Thanks for any help!

  PS. I'm not looking for the subject, and there are discussions since 2007 and lightroom 2 but their solution was to start from scratch basically and I have a carefully labeled, starred and labeled catalog of more than 30 000 images and really don't want to do that

  Images that are edited in Photoshop will be displayed automatically in Lr only when the image file saved in Photoshop is identical to open LR.

  You say you open a jpg of Lr, then edit in PS-among other things-adding a few layers. Layers are not supported in JPG format, so you must either save it as a psd or a copy in jpg.

  In both cases, is not the same image as the one opened in Lr file, so it will have to be imported into Lr appears. If flatten you your image after editing in PS and then do a to your JPG - not a - it will be displayed in Lr.

  PS: the only exception is when you open a raw image from Lr into PS and you save it to PS in the format of file specified in Lr for external mounting. The saved file is automatically displayed in LR.

  Post edited by: web-Weaver; PS added

• My computer does not correctly display web pages?

  On some web pages the boxes are stacked, for example on the MSN homepage ads pop up in the left corner of the screen on the top of the page instead of on the right side, and on the right hand side where they should be it's an empty box? Other pages display does not correctly? I don't know how to fix this or why it happened?

  Hi ChristineDupre,

  1. what browser do you use?

  2. don't you make changes on your computer before this problem?

  If you use Internet Explorer, you can follow these methods & check if it helps.

  
  Method 1

  You can follow this link and check if the problem persists.

  Some sites Web may not behave as expected in Internet Explorer

  
  Method 2

  If you have Internet explorer 9 installed, please follow this link.

  Web pages displayed incorrectly in Internet Explorer 9

  Hope the helps of information.
  Please post back and we do know.

• Theme 25 - items are not correctly displayed in the presentation of the grid

  Hi all

  APEX 4.2.5.00.08

  Oracle 11g Enterprise Edition

  I am new to 4.2. I created an application on 4.1 and exported 4.1 and imported to 4.2. I'm trying to view the forms as they were posted in 4.1. But I have problems with the presentation of the grid. The elements are the overlap between them and the regions is narrowed. I read a blog and he said to remove all the colspan which will then automatically display elements. I did, but it did not work. The form consists of several parts using a list of tabs on the page. Parts of the tab using the model 'Region without the buttons and titles' of the region. I tried to replace the template "no model", while he was a little better, it has not corrected the problem.

  I've migrated the application and objects in the db at the APEX. ORACLE.COM (it took a few hours) and I hope someone can resolve my problem until the site is upgraded to 5.0.

  Workspace: RGWORK

  Application: KIMBERLY (33925)

  Page: Vehicle details (13)

  Username: TESTER

  Password: test456

  The first screen will be a Update/View vehicles 1 choice menu

  Choose this option and a report with a single line id.

  Select this line and display page 13.

  You have Developer access but please keep me on what has been fixed. I don't want remedy you. I want to know what has been resolved as well.

  Please get back me to me as soon as POSSIBLE because the site is upgraded to 5.0 this Friday.

  Robert

  sect55 wrote:

  I am new to 4.2. I created an application on 4.1 and exported 4.1 and imported to 4.2. I'm trying to view the forms as they were posted in 4.1. But I have problems with the presentation of the grid. The elements are the overlap between them and the regions is narrowed.

  Why you want to switch to theme 25 instead of simply retain the theme that was used in 4.1?

  Go wrote:

  Robert,

  Look at your application. just a simple change.

  change:

  Region: Veh/equip Information

  Presentation of the grid:

  Start the new row: Yes

  That helps, but it's not the whole story, as it appears the layout is still affected by the problem described in the thread previous Theme 25 region without buttons and issuance of securities

  Applying the fix I suggested it (in 78449 application I created a copy to ensure that I was working with the initial problems) Gets the items on the same line, but I guess that's not the same as the original provision and it doesn't look very good.

  Basically, I would say either stick with the original theme or by switching to a 4.2 theme that still use the page layout based on a table (for example, 24 or 26). Theme 25 is difficult to work with and works best with presentations created especially for her from the start.

• color in CS4 are not correctly displayed since the upgrade to windows 10

  I have upgraded to Windows 10 last week and I had problems with colors does not display does not correctly in CS4. I tried to take a screenshot of exactly what I see in CS4, but when I post it online it seems fine. Telling me that something is now display properly in CS4. It also happens in LR3. When I post the photo online or look at him in the Windows Photo Viewer, it seems. I took a video of what is going on, but the quality is not so great. I apologize. Can anyone help? I have been searching the Internet for two days and can't find an answer to my problem. I went to the Intel website and there is not an updated video driver for my graphics card.

  Most likely you have a bad monitor via Windows Update profile. Manufacturer profiles are notoriously unreliable and often faulty and should always be avoided.

  This will only affect the applications of color management that actually use the profile.

  Recalibrate, or if you have a calibrator uses sRGB IEC61966 - 2.1 until you get a.

  

  Restart Photoshop when done so he can pick up the new profile at startup.

• Site does not correctly display on the Samsung Tablet

  Hi all

  I've seen a few questions about Muse sites not shown correct on a Samsung tablet. My problem is similar but even more. The site is the correct display on computer office/ipad/iphone but not on the Tablet from Samsung.

  In the previewt its is not displayed. Now, I also know that the preview more or less simulates how a site should look like.

  This is the site: www.uwpersoonlijkeoptieadviseur.nl (Dutch site).

  I looked at the links and they seem to be ok. I mean all the links link to the version of the tablet.

  see you soon,

  Larry

  Great!

  Yes, that would be a problem with browser itself that you understood.

  This can happen if the browser is not updated with the older devices.

  Thank you

  Sanjit

• CSS is not correctly displayed in Firefox

  My new CSS layout is beautiful in IE7 (weird), however, it does not correctly render in Firefox. I always do some research before posting here, but I'm completely helpless now. I'm very new to CSS, this is my first page I put on the use of this language. Virtually none of the higher margins work, and my image of false column does not appear. I will attach the HTML and the CSS and see if someone can point out what's wrong with Firefox.

  nowherecreative wrote:
  > My new CSS layout is beautiful in IE7 (weird), however, it is not made
  > correctly in Firefox. I always do some research before posting here, but I'm
  > now completely impotent. I'm very new to CSS, this is my first page I put
  > on the use of this language. Virtually none of the higher margins are not working and my
  > does not display a false image of columns. I'll join the HTML and the CSS and see if
  > can anyone point out what's wrong with Firefox.

  Hello

  Try floating this rule #page - container2 left.

  HTH

  --
  Chin chin
  Sinclair

• Chinese characters are not correctly displayed in programs

  Have you ever this resolved?

  I installed Windows 7 Ultimate, version English, use Windows Update to get the support of the Chinese language, then set up a username for my Chinese wife, with its language set to simplified Chinese. Some things will appear with the text of disorder "(iaa÷4£ ºo³ani³oi).
  I played with the locale and tried several things of different issues here. None of this helps somehow. At least, he did not the worst problem.

  Hi gordintoronto,

  What steps you have tried to solve the problem?

  You can follow this link and check if the problem persists.

  To install the files for East Asian on your computer

  Hope the helps of information.
  Please post back and we do know.

• Special Chr (189) characters and characterset is NOT correctly displayed on the page

  I have a 1/2 special character, stored in the database (Select chr (189) Anom double ;))
  I read (using the PL/SQL) special characters from a text file and insert into one table.
  
  Select dline from MyTable (I see the 1/2 in the table).
  
  Problem is I can't get the 1/2 for display on a web page. On the contrary, it appears as "A"?
  
  How can I get special characters (IE > 127) is displayed correctly on the web page?
  
  I'm using classic ASP.
  I put
  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 ">"
  
  I tried to do a convert (I tried in many ways, this is just 1 example)
  
  mySql = "dline Select convert (dline,'WE8ISO8859P15 ','WE8MSWIN1252 ') from myTable"
  
  
  My version:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - production
  PL/SQL Release 10.2.0.4.0 - Production
  "CORE 10.2.0.4.0 Production."
  AMT for 32-bit Windows: release 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production
  
  My game:
  -WE8MSWIN1252 NLS_CHARACTERSET
  -NLS_NCHAR_CHARACTERSET AL16UTF16
  
  
  NLS_LANGUAGE AMERICAN
  NLS_TERRITORY AMERICA
  NLS_CURRENCY $
  NLS_ISO_CURRENCY AMERICA
  NLS_NUMERIC_CHARACTERS.,.
  WE8MSWIN1252 NLS_CHARACTERSET
  NLS_CALENDAR GREGORIAN
  NLS_DATE_FORMAT DD-MON-RR
  NLS_DATE_LANGUAGE AMERICAN
  NLS_SORT BINARY
  NLS_TIME_FORMAT HH.MI. SSXFF AM
  NLS_TIMESTAMP_FORMAT-DD-MON-RR HH.MI. SSXFF AM
  NLS_TIME_TZ_FORMAT HH.MI. SSXFF AM TZR
  NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI. SSXFF AM TZR
  NLS_DUAL_CURRENCY $
  BINARY NLS_COMP
  NLS_LENGTH_SEMANTICS BYTES
  NLS_NCHAR_CHARACTERSET AL16UTF16
  NLS_NCHAR_CONV_EXCP FAKE
  NLS_RDBMS_VERSION 10.2.0.4.0
  
  TIA
  Steve42
  
  Published by: Steve42 on May 13, 2013 15:19

  Hello Steve,.

  This is the forum for the tool {forum: id = 260}.
  Please mark this question as answered, while others know that they can ignore it. Then validate again in {forum: id = 75}.

  Concerning
  Marcus

• Bookmarks are not correctly displayed in the iOS app version 15.4

  We are having a problem with the current version of the iOS app.  Bookmarks to a PDF file are displayed in the application, but the part of the text for the bookmark is missing.  We tried to open the PDF in iBooks and bookmarks are displayed correctly.  See the attached images.

  See

  HI jamieh40910107,

  Thanks for posting the screenshots.  They are very useful.

  The second screenshot shows clearly that the bookmark labels contain newline characters.  Your bookmark labels extend two lines.

  line 1:6.

  line 2:. Horse Expo

  line 1:7.

  line 2:. a. second reading...

  Acrobat Reader for iOS shows only the first line ('6', '7') of each bookmark label and don't watch not the second line.  In contrast, iBooks shows multi-line bookmark labels.

  I will file a bug report for the problem with bookmark multiline labels in Acrobat Reader.

  As a solution, if you have a copy of Acrobat Pro (a PDF editor for Windows or Mac computers), you can change the bookmark labels to remove line break characters and turn them into bookmark single-line labels.

  Alternatively, you can use a trial version for 30 days to see if it fits your needs.

  Download Adobe Acrobat free trial | Acrobat Pro DC

  Thanks for reporting the issue!