List of the albums of songs is not correctly displayed on any iPad

Similar Questions

• How can I correct the installed fonts which are not correctly displayed in InDesign 2015?

  I use InDesign 2015.2 on Windows 7.  I'm working on a document and you want to use a family of fonts installed on my computer.  Not all fonts display correctly in the window however.  When I select some fonts to a paragraph style, they appear as symbols and glyphs.  These fonts appear in the drop-down type (and an example of the face appears in the drop-down list).  They work very well in other applications Adobe, such as Illustrator.  No idea why I can't get to work in InDesign?  TIA!

  No, just reconnect to the account else and trash the prefs see replace your preferences

• Change is not correctly displayed in the develop Module

  When I make a change in the develop Module, changes are not correctly displayed in the main window and the browser window becomes gray. When I get back to the library Module, the changed image appears correctly. Then when I get back to the develop Module, the changes appear correctly. I followed the troubleshooting steps and a single point Adobe says that the permissions of the user is perhaps not good. I created a new user, and in the new user profile, LR works as it should. I use Windows 7. What should I change in the old "user permissions" to match the new "user permissions"? I prefer to delete the new user, rather than recreate my environment all over again.

  If you see gray windows to develop, it is almost generally a bad monitor profile in Windows. Unfortunately quite common. You should recalibrate the monitor. If you do not have a calibrator, try to go into the properties of your screen pane. Go to the color management tab and remove any profile associated with the parser.

• When I drag files in WMP the sequence of songs is not because it is in the list of files. the first certain tracks are at the bottom of the playlist

  When I drag music files in WMP and in the field of reading list, the sequence of songs is not as it should be determined in accordance with the list of files in Explorer windows, the first or the first few tracks are at the bottom of the playlis.
  For example when I drag the track 1 to 10 in WMP playlist could end up with the 4,5,6,7,8,9,10,1,2,3 sequence. It ranges from which follow playlist starts with, but the first track (s) (rare) is at the bottom every time.

  PS. Shuffle is not lit.

  Is not necessarily any indication of a fault as WMP does this, even when it is running correctly [he apparently gets files loaded in the order that they appear in the allocation table disk files].

  You can

  1 after dragging in the playlist, drag files to the top or to the bottom of the playlist in the desired order before you save the playlist.

  2 Allocate Index properties for each track before slipping as WMP then normally behave correctly when you drag them.

  3 you can also drag the in WMP individually to achieve the same end result.

• Add a photo from the album a song?

  Is it possible to add a photo from the album a song at the computer so when it's a game on a phone (a Nokia C3-00), the image will be visible next to the title?

  The link below is an example. I got the song fromm someone else and I added nothing to it, just put it in the phone. But once played, a picture next to the title of the song (not the image of the album, maybe the image of the site where to get this song).
  http://img20.imageshack.us/img20/1428/img8524h.jpg

  Hi knguyen7,

  Welcome to the Microsoft community where you can find all the answers related to windows!

  According to the description, it looks like you want to add a photo from the album a song.

  I will certainly help you with this issue.

  "Visit this link if you want to add to the album by using Windows Media Player, refer to" ""manually add album art of your choice ".

  http://Windows.Microsoft.com/en-us/Windows7/add-or-change-album-art-in-Windows-Media-Player

  Hope this information helps. Answer us queries windows and we will be happy to help.

• Here is a list of the driver updates that do not install for one reason or another: Intel Desktop/Workstation/Server Express Chipset SATAAHCI controller your driver is out of date.

  Here is a list of the driver updates that do not install for one reason or another:

  Intel Desktop/Workstation/Server Express Chipset SATAAHCI controller

  Your driver is out of date.

  The installed driver date 30/05/2012

  New driver Date 18/09/2012

  After the next driver update > the following message appears:

  This driver downloaded successfully.

  You want to install it now?

  Yes. Then was the following result:

  Please update your Windows update Agent version.

  You can download the latest version by clicking here.

  If the Microsoft FixIt solution above does not solve your problem.

  Check on the Intel site.

  For example: http://www.intel.com/p/en_US/support/detect

• Acer site does not correctly display the specification.

  Acer site does not correctly display the specification.

  Example when you click on the link on M5 Explorer - 581 T-6405 please as to the specification of the model of S7-191-6447. Please check

  Thank you bring to our attention. We will ensure that it is transmitted.

• Canon 5 d images are not correctly displayed in the develop module, they look posterized or something. They look fine in the library module, what happens?

  Canon 5 d images are not correctly displayed in the develop module, they look posterized or something. They look fine in the library module, what happens?

  Try turning off the GPU. Go in Edition > Preferences > Performance (Lightroom > preferences > Performance on a Mac) and uncheck the box use Graphics Processor.

• Edited in Photoshop does not correctly display in Lightroom after recording the images

  Hello

  I recvently EU cloud Adobe and upgraded from Lightroom 3 or 4.  Since the upgrade I had problems with Lightroom not correctly display images edited in Photoshop.  Instead of the photoshop image, it creates a new jpeg image and appears in the library.  the PSD is not loaded into the library.

  I take a jpeg image of my library and shoosing the change based on Photoshop.  By selecting Edit a copy, I'm tried with the original and edit a copy with lightroom adjustments as well as with the same results.

  In Photoshop, I duplicate the base layer, the image upscaling, running some filters, addition of volunteering adjustment layers.

  I save the image in Photoshop format in the original folder where the original jpeg was in the Lightroom library.  I record with maximize compatibility on.

  When I return to Lightroom, the catalog displays the two files, the original jpeg and a copy identical to it, NOT the new file in photoshop with alterations.  If I go in the folder images occupy in the Finder using the Finder command show two images link to the same original jpeg format.  The modified file to photoshop is there in the folder but does not appear in Lightroom unless I drag and drop it.

  I've disabled all the filters and ensured that the sort is sort by name.  The image does not automatically appears in Lightroom after mounting.  Any suggestions?

  Thanks for any help!

  PS. I'm not looking for the subject, and there are discussions since 2007 and lightroom 2 but their solution was to start from scratch basically and I have a carefully labeled, starred and labeled catalog of more than 30 000 images and really don't want to do that

  Images that are edited in Photoshop will be displayed automatically in Lr only when the image file saved in Photoshop is identical to open LR.

  You say you open a jpg of Lr, then edit in PS-among other things-adding a few layers. Layers are not supported in JPG format, so you must either save it as a psd or a copy in jpg.

  In both cases, is not the same image as the one opened in Lr file, so it will have to be imported into Lr appears. If flatten you your image after editing in PS and then do a to your JPG - not a - it will be displayed in Lr.

  PS: the only exception is when you open a raw image from Lr into PS and you save it to PS in the format of file specified in Lr for external mounting. The saved file is automatically displayed in LR.

  Post edited by: web-Weaver; PS added

• Animation is not correctly displayed in Firefox

  My animation is not correctly displayed in Firefox. Have searched this forum and others, I am only able to find solutions exceeded (such as the update to the latest version of Animate). I'm on the later versions of Animate and Firefox and still problems. Anyone know of a solution to this, or can I directly me to a discussion which has already covers it?

  One interesting thing to note is that only the tree Centre is differently, the commands for each seem to be the same. The small mountains are also fine, but not Mount Rainier.

  Here is my test page:

  http://jonnyart.com/test/NewYearsAnimation

  Thank you!

  In case someone else runs into this problem, I was able to solve it by rebuilding portions of the animation.

• Media Player 11 install new music Import does not recognize the album - only songs?

  I recently had my laptop reimagee (XP Pro). I copied the MyMusic folder under my documents. Then installed WMP 11 and he started upward. It has imported all the songs, but nothing appears in the views of the artist or Album except a unknown album with all the songs.

  I got so far without resolving the question of the measures:

  • Removed the program using Add/Remove, then reinstalled WMP 11
  • Delete the database files in %userprofile%\Local Settings\Application Data\Microsoft\Media Player and restarted WMP11. Same happes: songs are added, but not the album or artist information

  What now? iTunes has been installed properly recognized all albums/artists (just saying...), but prefer OMP

  Thank you

  smawsky, have you tried to reset the library with the instructions I mentioned in one of my previous answers? Attention to my note on the WMP network sharing Service.

  If you copy a few of these tracks from the disc in the folder external HARD music in My Documents, WMP reads the tags of the files copied? And what about the sample music files which are added to the default library?

  Tim Baets
  http://www.BM-productions.TK

• my cd/dvd is more listed on the computer and it will not play anything

  If I'm going to start the computer and then open cd/dvd is more listed also is absent from the menu equipment. I'm not a COMPUTER guru to take it easy with the answers. Thank you

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Webfont is not correctly displayed in Design view or in the list of fonts

  Muse to update and now my topic times (Nunito) does not display correctly in design mode or on the list of fonts. It is, however, not display correctly in preview mode. When I try and delete the police, and then add it again, I get an error message that says that the police cannot be added. Any idea what's going on?

  Hello

  Please, try the following steps. I hope this will fix the problem.

  1. close the Muse

  2 rename the folders named tk1 and tk2 in the following locations

  On Windows: %appdata%\com.adobe.AdobeMuseCC.2014.2\Local store. You can type this in the path bar at the top of the Windows Explorer window

  On Mac: ~/Library/Preferences/com.adobe.AdobeMuseCC.2014.2/Local store. You can type in the dialog box go to the folder (shift-command-G)

  3. launch Muse and add the police

  Please let me know if that helps.

  Concerning

  Vivek

• Lists are not correctly displayed in the web browser

  I use robohelp 7 and I have actually two problems. First problem is if I create a < li > when I switch mode html to design mode and then back to the html view the < ol > has been replaced by a < ul >.

  Then I use the nested lists. They appear as you want in design view but when I complie the code and run it in FF or IE 8, the lists are not displayed as lists. The content of these lists is displayed just like each item in the list is a separate line. Also it will display not < dl > either.

  In this new, I believe that a descendant selector missing could be a problem. In other words, there is no rule to cover this line (one

without a anchor, or its contents):

I expect that you would need settings for a rule as follows:

#menu ul li {}

I also think:

• What happens if you delete that
Online? Or, what happens if you keep the line but add an anchor and text (duplicate the line in search of the next
)?
• Why lists nested in a
  element? They are normally used to establish a separate division on a page (other than normal)the elements), such as blocks of navigation on the right side of a page, high or low.
• Why are
• tags so restricted and? In other words, the #menu ol li a: link rule covers an anchor If it is nested in a
• tag, If that
• tag is nested in a tag
  and only if
  tag nested within a
  tag.

Unless you need different

• and styles for others
  selectors, the use of descendant selectors can be extremely difficult to control. I might even suggest to start fresh with the default.css (one of several provided by HR) and set it
• individually.

  Good luck

  Leon