chkdisk-type of file system is NTFS, the volume is dirty, what it means

Similar Questions

• When I turn on my pc it says checking file system on c: for the consistency__volume label is ACER__the type of file system is ntfs__then the check stops at __ % 45__

  NTFS

  Hello

  Disable or stop Auto CHKDSK during Windows startup - scroll to it.
  http://rahuldpatel.WordPress.com/2008/11/22/

  How can I stop CHKDSK from running each time my PC?
  http://www.OCModShop.com/OCModShop.aspx?a=874

  How to run check disk at startup in Vista - check methods 3 and 4
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Video: Stop Check Disk from constantly running at startup in Windows Vista
  http://blogs.TechRepublic.com.com/itdojo/?p=193

  ChkDsk runs every time Windows starts.
  http://www.WinVistaClub.com/T20.html

  ==============================

  If you need to check with the Acer support:

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Checking file system on C: the Type of file is NTFS. The Volume is dirty. -What this means and how do I clean the Volume, please? My computer is Dell XPS

  Recently, when I turn on my computer is starts, guests of the computer and starts check my system files as follows: "checking file system on C: the Type of the file is NTFS. The Volume is dirty. "That is what this means and how can I clean and maintain the clean Volume, please? My computer is Dell XPS

  The computer system continues and invite "CHKDSK checks the files (step 1 of 3)... .

  The system deletes some files and at the end of shows, complete audit files and then show

  CHLDSK is verifying indexes (stage 2 of 3)...

  Once again, it shows the following:

  Deleting Index Entry _64280 ~ 1. jpg in index file 4632 $130

  Deleting Index Entry _64280552_little-mix_211112_get [1] .jpg in index file 4632 $130

  Deleting Index Entry 69gw [1] .jpg in index file 6722 $130

  Remove entries of Index 69 GW_1 ~ 1. jpg in index file 6722 $130

  Deleting Index Entry _64274754_messi_211112_elvis [1] .jpg in index file 6722 $130

  Deleting entry Index _64274 ~ 1. jpg in index file 6722 $130

  Finished the index checking

  CHKDSK is checking security descriptors (stage 3 of 3)...

  100%

  CHKDSK checks usn Journal...

  Windows control disc is finished.

  After all checks, Windows proceed to start as usual.

  I would like to know if I need the dirty Volume, and if so, how can I carry out the cleaning operation.

  Sometimes, at the early stage of the CHKDSK, the computer makes a pe. .. PE... noise and cut.  Then I turn the computer off via the key of the insulation. When I restart the computer, it then runs the check again until the end.

  Please advice me on the following points:

  1 is this normal as he started only happening in recent weeks?

  2. How can clean the Volume in order to show "Volume is clean instead of sale"

  I look forward to hear from you.

  Thank you

  Hi, Dr.,

  Volumes that contain file system errors are known as Sales. To indicate that a file system problem has occurred and that the volume is dirty, Windows XP Professional displays a message similar to the following when you try to open, delete, or rename a file or folder by using Microsoft Windows Explorer or the command prompt:

  Autochk runs if the volume is marked as modified.

  If the file system has marked the volume as dirty, Autochk runs the Startup Repair process. Volumes are marked as dirty, when the file system detects an error on the volume. If Autochk detects a dirty volume, it provides a delay of 10 seconds, and then starts the repair process. If you cancel Autochk when a volume is dirty, Autochk tries to run again after a 10 second delay every time the computer is restarted.

  See Chkdsk for all the necessary explanations:

  http://TechNet.Microsoft.com/en-us/library/bb457122.aspx

  Run the Dell Diagnostics to check the drive failure.  If the disc is a failure, it must be replaced.

• What is FAT, FAT32 & NTFS maximum file size of file systems supported? File system of all the methods of the passage of FAT & FAT32 to NTFS without formatting is appreciated.

  What is FAT, FAT32 & NTFS maximum file size of file systems supported? File system of all the methods of the passage of FAT & FAT32 to NTFS without formatting is appreciated. (IE without deleting the files from a particular disk).

  Difference between material FAT & FAT32?

  I have a disk full of files, and it is in the FAT32 file system. As I can't copy large files (5 GB +) in this player, I intend to fix this by changing the file systems. Apparently, it is not possible to do it without formatting. I am curious about a way to do this without destroying the drive.

  Thanks in advance.

  Eguy

  Tuesday, October 9, 2012 16:55:51 + 0000, Eguy wrote:

  What is FAT, FAT32 & NTFS maximum file size of file systems supported? File system of all the methods of the passage of FAT & FAT32 to NTFS without formatting is appreciated. (IE without deleting the files from a particular disk).

  Difference between material FAT & FAT32?

  First, note that there are three varieties of FAT: FAT12, FAT16, and
  FAT32. Many people call just FAT16 FAT, because before that FAT32 is out.
  FAT16 is the only variety used for hard drives, so just
  The FAT was not enough.

  FAT12 (hardly any more used) had a maximum volume size of 12 MB.
  It has been used almost exclusively for floppy disks.

  FAT16 was used on hard disks (or partitions) up to 4 GB and had a
  cluster size which varied from 2 KB to 64 KB, depending on the size of
  the partition. It serves almost never again, because almost nobody does
  a as small as 4 GB partitions.

  FAT32 FAT16 succeeded and has a maximum drive size of 2 TB. His
  maximum file size is 4 GB, which explains why you can't copy a file of 5 GB to
  it. its cluster size is 4 KB up to an 8 GB partition. Beyond 8 GB the
  cluster size develops up to 32 KB.
  NTFS, that's what almost everyone should use on their hard drives
  today. Its maximum volume size is 2 ^ ^ 64-1 and its maximum file size
  16 × 1024 is ^ ^ 6 bytes (much more than the bigger hard drive available
  today). Cluster size is 4 KB, regardless of the size of the volume.

  I have a disk full of files, and it is in the FAT32 file system. As I can't copy large files (5 GB +) in this player, I intend to fix this by changing the file systems.

  Good! You should.

  Apparently, it is not possible to do it without formatting.

  It's not correct. To convert to NTFS, use you the CONVERT
  command. But first read http://www.aumha.org/a/ntfscvt.htm , because
  There is an important question about the size of cluster that is not obvious.

  Also note that conversion is an important step, touching everything on your
  drive. When you take a big step, no matter how unlikely it is
  always possible that something can go wrong. For this reason, there
  careful to make sure that you have a backup of everything you can not afford to
  lose before you start.

  Ken Blake, Microsoft MVP

• Adobe Reader could not open 'hs_err_pid14036.log' because it is not a type of file supported or because the file has been damaged.

  Several files have been created and they are on my desk. When I try and open the files I have Adobe Reader could not open 'hs_err_pid14036.log' because it is not a type of file supported or because the file has been damaged. What can I do?

  It seems to me that your system file associations are out of step and must be properly configured.

  First, you will need to know what to use to open these files. Then you can Google how to set the file associations for any operating system you have and go and put them in the correct application.

  As to why they are generated, not sure, but not something from Adobe.

• copy files from my C drive to my external drive error E 0x800718ac3: the volume is dirty?

  Original title: can anyone help with this problem error 0x800718ac3: the volume is dirty?

  I am trying to copy files from my C drive to my external drive E using the operation drag and drop method. That's what happens "error 0x800718ac3: the volume is dirty" can you help me?

  Hello

  1. What is the full error message?

  2. what operating system is installed on the computer?

  3 did you changes to the computer before the show?

  4. What are the names of files and the exact location of the files you are trying to copy?

  Method 1:   Format the external drive of E and see if that helps.

  Reference:

  Formatting disks and drives: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

  Note: Format deletes the data on the disk. Be sure to back up data before the format.

    

  Method 2: You can check the external E drive to find errors.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Reference:

  Check a drive for errors:

   http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

• Photo Gallery can't open the photo or the video because this file format is not supported or I have no updates to the photo gallery of what it means?

  Photo Gallery can't open the photo or the video because this file format is not supported or I have no updates to the photo gallery of what it means?

  Hi mariart

  Welcome to the Microsoft Answers Forum!

  ·         What format of picture or video file you are trying to open using the Windows Photo Gallery?

  Here is the link that will give you the description of the Windows Photo Gallery: Windows Photo Gallery: frequently asked questions

  Make sure that the Windows Photo Gallery is the default value. Steps to follow:

  i. Click Start, in the search box type in default of program

  II. Select set your default programs

  III. click the windows photo gallery, and then select set this program as default

  Link for reference: change that uses default Windows programs

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• the identification has changed to the CHRC... what it means?

  The icon for Mozilla Firefox has been reading of Mozilla Firefox, but now it shows the CHRC... what it means, what it is and why it was changed?

  The text under your Firefox on the Windows desktop icon has changed to the CHRC...? I think that you can rename it to whatever you want, but I see no reason for this change on its own.

  Could you do a right click and take a look at properties? You expect to see a 'target' like "C:\Program Files\Mozilla Firefox\firefox.exe" Summary anything here?

• I want to disable a program, but it does not appear in the volume mixer. What should I do?

  I would like to watch movies and other videos while playing games on my computer because I have two screens. I so want to put games on mute while I hear whats going on in the film. However, there are some games that does not allow me not completely turn off the sound in the game for example Dirt 3. So I use the mixer to mute volume it but the game does not appear in the volume mixer. What should I do so that I can see the game and mute it?

  Hello Joel Buch, r.
   
  Unfortunately, if you can't cut of in the game you can not do.
   
   

• Type of file system for Windows 7

  Separated from this thread.

  Buth that I take for windows 7 ultimate fat 32 or ntfs

  NTFS is the file system recommended for Windows and hard disks be used with Windows. It is more stable and more secure than FAT32. In addition, FAT32 has some limitations like maximum file size should be 4 GB only, not supported (EFS) encryption, etc..

  More information can be found in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/comparing-NTFS-and-FAT-file-systems

• CPU, RAM and disk, file system information for the data, logs, temp, Archive for database

  Hello gurus,
  
  How can we see what size of CPU and RAM for the database? According to the previous steps of this great site, I could able to do
  

  SQL> show parameter sga_max_size
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  sga_max_size                         big integer 800M
  SQL> exit

  Therefore, the size of the RAM for the database to which I have connected
  

  rootd2n3v5# ioscan -kfn |grep -i processor
  processor    0  13/120         processor CLAIMED     PROCESSOR    Processor
  processor    1  13/121         processor CLAIMED     PROCESSOR    Processor
  processor    2  13/122         processor CLAIMED     PROCESSOR    Processor
  processor    3  13/123         processor CLAIMED     PROCESSOR    Processor
  rootd2n3v5#

  The one above was the command give the OS level that I don't know what information he gives and what database, since there are 12 databases on this server.
  
  How can I get the CPU information?
  
  And where can I find information for information of system data files, logs, temp, Archive?
  

  <div class="jive-quote">select * from v$version</div>
  BANNER                                                           
  ---------------------------------------------------------------- 
  Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi 
  PL/SQL Release 10.2.0.5.0 - Production                           
  CORE     10.2.0.5.0     Production                                         
  TNS for HPUX: Version 10.2.0.5.0 - Production                    
  NLSRTL Version 10.2.0.5.0 - Production

  Ask the system administrator if the database server is a physical machine, if it is hardware partitioned or created under a virtual machine Manager? Check the operating system utilities. On AIX uname to identify if you are on an LPAR.

  In Oracle, you can query the parameter $ v to cpu_count to see how many cpu Oracle says he sees.

  HTH - Mark D Powell.

• How to get the Types of files - not associated with the applications Adobe CC

  How can I prevent Adobe creative cloud files of type to come in my research.

  I don't know how to use I or PS I accidentally a license and an image that cannot be opened with the help of HAVE or EPS (which makes all this shit even average?)

  I just want some png or JPEG files or any files can be used without having to use adobe software.

  So now I'm forced by Adobe to pay $22.99 per month for access to their software, just so that I can open a picture - what the mini-bars

  I'm not a designer, I can't use these programs, I want just the images that I can use on my site - is it so difficult?

  It is very easy in fact. Just deselect "Vectors" in your search. Which will remove all the .ai files. The rest you can use without any Adobe applications at all.

  

  And to be sure, every detail of the image indicates the type of file. If she says .ai/.eps you probably don't want to.

  

• Difference between file system capacity and the capacity of the disks in Capacity Planner reports

  Hello

  I had to go on my Capacity Planner tool training soon, but I have a question on the front that frustrates me. In the evaluation report that comes out of the tool after the analysis, a use of disc section, which lists all the servers for analysis there. A column of this report is directed to file system capacity, another disk capacity. In all cases, the first is less than the latter. What is the exact meaning of these labels?

  Some of the numbers differ substantially between the columns, for example 20 GB for a capacity of 36 GB of disk space for a server and file system. He said that only 20 GB to 36 GB disk is formatted/partitioned to use?

  As previously stated:

  Disk capacity is 36 GB - physically, there are 36 GB of storage.

  File system is logical capacity - the amount of space used by files on the disks.

  File system and the capacity of the disks will never match because fees General table of file.

  I hope this helps.

  -abe

  INTEGRITAS!

  Abe Lister

  Just a guy who likes to virtualize

  ==============================

  Won't lie. I like points. I mean, if something useful for you, consider slipping a few points for him!

• Open a file from the file system based on the selection

  Hi Experts,
  
  I need your expert advice on opening a file (in a new window) on the basis
  the user's selection.
  
  I have a following database table that is web_doc which contains the file names and the description.
  
  PK_ID - FILE_NAME - FILE_DESC
  ------- -------------------------------------------------------------------------------
  1 table to create a client address - a.txt -.
  2 - b.txt - client Create table of contents
  3 - activity table of sperm to create c.txt -.
  4 - d.txt - Create embryo activity table
  
  What I want: When the user clicks on one of highest rank on the screen of the apex, the file must
  Open in a new window. The files are stored in the file system is to be
  
  Thanks in advance.
  
  Published by: user8609115 on January 27, 2010 09:18

  Dip,

  Try something like:

  <a href="/i/your_folder_name/your_file_name.doc">Get File</a>
  

  Kind regards
  Dan

  Blog: http://DanielMcGhan.us/
  Work: http://SkillBuilders.com/
  Dip,

  Try something like:

• File system/memory of the BlackBerry phone system

  Hello

  I'm new on the Blackberry phone and development. A phone Blackberry contains BOTH memory device & SD memory? Or does have one of the two depending on the model of the device. I noticed 8300 has only the memory of the device. I ask this is because I'm supposed to develop an application that will search media within a Blackberry phone, and so I'm wondering if I need to analyze the file:///SDCard/BlackBerry/ and the file:///store/home/user/.

  Thank you!

  Depending on the device, the Application memory does not exist and is simply included inside the memory of the device. This is the case for the Curve 8300 peripheral for example.