Choice of a model of desktop Inspiron for two monitors

Similar Questions

• Best graphics card for two monitors to Compaq Presario SR5610F

  I have a Compaq Presario SR5610F.  I want to upgrade the video card, so I can run two monitors.  What is the lowest card cost that is compatible with this machine?  The computer has the PCI Express Slot.  It has only a power of 250W.  There is a card that can be purchased to upgrade the memory of 256 MB card, run two monitors and I must not change the power supply?  I have a high-end gaming card.

  Thank you

  MJCSJC1

  Are what video connectors your monitors supported?  Most of the low-end cards have vga and DVI connectors, you should swing $30-$60.  If you are looking for dual DVI, nVidia has a 8600GT for around $100 but may need to get connector to power the card with your current diet.

• Tool Windows 2Installez for two monitors

  I have a problem connecting to a monitor to your laptop and stretching of the screen of the computer on the screen. After doing so, the auto screen monitor will pop all the windows on the monitor for a little more than half of the screen, leaving a large part on top that is unusable. If I maximize the window that it will expand only to slightly more than half of the screen, leaving this same space above it that is unusable. I can use the entire screen of the laptop, but only about half of the screen of the monitor. In my view, it is to increase the area of auto snap to fill the entire screen, but I don't know how to fix this. Any help is appreciated, thanks.

  Hello

  Please contact Microsoft Community.

  Usually this problem due to display.

  Method 1:

  Try to run display resolution of quality issues and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 2:

  See the article mentioned and try to get the best display on your monitor and check if that helps:

  Get the best display on your monitor

  Get the best display on your monitor

  I hope this helps.

• How to connect the cables to an AMD Radeon HD 7450 video card for two monitors individual work?

  I have a HP Pavilion p6-2360eo with the video card Radeon 7450 connected to a monitor of 23xi Pavilion.

  Now, I want to add a monitor of 23xi more, but I do not understand how to connect the cables to the video card to get two logical screen (different views on each monitor)

  Supposedly this monitor can connect to the video card, you have the HDMI connection.  Assuming that the first monitor is connected via DVI, then try a HDMI cable to the second.  I got this from the description of the video card on THIS page.

  Support up to two displays at the same time in these configurations: DVI, HDMI and VGA + HDMI (using the included adapter cable)

• SSD for MT Desktop Inspiron 660

  Hi all

  I want to just make sure that this drive works with my desktop Inspiron 660 MT.

  http://www.Newegg.com/product/product.aspx?item=20-211-597&SortField=0&SummaryType=0&PageSize=10&PurchaseMark=&SelectedRating=-1&VideoOnlyMark=false&VendorMark=&IsFeedbackTab=true&page=3

  I have 1 left port on the motherboard sata (2 occupied by optical drives and 1 by sata hddrv).

  Thanks for all replies!

  Hi Salucchi,

  The hard disk that you mentioned is a hard disk SATA III and that your computer has SATA III connectors. So, this player should work with the system.

  Answer please for more details.

• choice of the model of design for data acquisition system

  Hi all

  I have a problem on the selection of the model design / architecture for a data acquisition system.

  Here are the details of the desired system:

  There are data acquisition hardware and I need to use by looking at the settings on the user interface.

  the period of data acquisition, channel list to analyze must be selected on the user interface. In addition, there are many interactions with the user interface. for example if the user selects a channel to add scanlist, I need to activate and make it visible to others on the user interface.

  When the user completes the channel selection, then he will press the button to start the data acquisition. Then, I also need to show the values scanned on a graph in real time and save them in a txt file.

  I know that I can not use producer consumer model here. because the data acquisition loop should wait for the settings to scan channels. and it works on a given period by the user. If the loop of user interface makes higher then loop (loop data acquisition) of consumption. This means that queue will be bigger, larger. If I use notifier this will be some data loss comes from the user interface.

  y at - it an idea about it? is there any model of design suitable for this case?

  Thanks in advance

  Best regards

  Veli BAYAR

  Software for embedded systems and hardware engineer

  Veli,

  I recommend the model producer/consumer with some modifications.

  You might need three loops.  I can't tell for sure from your brief description.

  The loop of the User Interface responds to the user for configuration entries and start/stop of acquisition.  The parameters and commands are passed to the Data Acquisition loop via a queue. In this loop is a machine States that slowed, Configuration, Acquisition and stop States (and perhaps others). The data is sent to the processing loop through another line. The processing loop performs any data processing, displays the data from the user, and records to file. A registrant can be used to send the Stop command or stop the loop of the UI for other loops.  If the amount of treatment is minimal and the time of writing files are not too long, the functions of processing loop might be able to happen in the case of the UI loop timeout structure of the event.  This makes things a little easier, but is not as flexible when changes need to be made.

  I'm not sure that there is a type of design for this exact configuration, but it is essentially a combination of the models Design of producer/consumer (data) and producer/consumer (events).

  Lynn

• Hard drive and DataBurst cache for computer DESKTOP INSPIRON UBUNTU

  I need a second HD internal desktop INSPIRON 530 UBUNTU.  One is Serial ATA 7200 MIN rpm with databurst cache.

  Issues related to the:

  1. What is databurst cache?

  2 - are "Series ATA" and "SATA" the same thing?

  3 - no advantage to buy the 2nd HD Dell?

  4 - any other suggestions?

  Thank you very much.

  
  

• Can I connect two monitors desktop Dell Inspiron i660-5041BK?

  I am looking to buy desktop Inspiron i660-5041BK but need to connect two monitors to it.  I think I can with the HDMI and the regular monitor port.  What do you think?

  KateMcphee

  I am looking to buy desktop Inspiron i660-5041BK but need to connect two monitors to it.  I think I can with the HDMI and the regular monitor port.  What do you think?

  Can use something like this HERE, or HERE, but it would be better to put a map, where you will have a better choice of connectors. I that you intend to use the HDMI, then you will need a something similar to what I proposed to make it work.

• 2007FP driver monitor, desktop Inspiron 530, Windows 7

  I have a DELL Inspiron 530 (bought 2008) desktop computer that was preinstalled with the Win Vista op sys. It works now Win 7 op sys. The monitor is a DELL2007FP (purchase in 2007). The current driver is a graphic Standard VGA adapter from Microsoft (6.1.7600.16385). New software that I use for e-books work well with this driver. When I am looking for a new driver for Inspiron 530 desktop PC on the DELL Web site I get only the drivers for Win Vista sys op because it was the original sys op on this PC. Is it possible to obtain a new driver from DELL that will work with my system?

  Thomas C.

  Thomas C.,.

  The pilot only 2007FP we did was for Windows 2000 and XP. Dell will not create new drivers for a monitor released in 2006.

• Desktop HP Pavilion p6580t CTO: How can I configure my desktop PC HP Pavilion p6580t CTO for duel monitors?

  I am trying to understand what graphics card I put in my computer HP so I can run 2 two monitors and I have to cut the design of the motherboard that is installed on the computer. I have a HP w2207h (22 ") w/VGA port monitor that I use. and a ViewSonic VP2130B (21 ") monitor that has 1 VGA DVI port and 1-should I wear as the second monitor. The HP monitor is the oblong shape type and the ViewSonic is more a monitor of type square. I don't think it would be a problem, isn't it? In addition, my power is 300W. I don't want to spend a lot on the graphics card that this computer is about 6 years old; just enough to get a Setup dual monitor works.

  Below you will find the info from my computer.
  HP Pavilion p6580t CTO desktop PC
  Model # WS326AV

  Operating system - Windows 7 Ultimate 64 bit SP1 (office)

  CPU - Intel Core i5 650 @ 3.20 GHz Clarkdale 32nm technology
  Carrots 2
  Son 4
  Name Intel Core i5 650
  Code-named Clarkdale
  Package Socket LGA 1156
  The 32nm technology
  Specification Intel Core i5 CPU 650 @ 3.20 GHz
  RAM - 8.00 GB memory DDR3 twin @ 665 MHz (9-9-9-24)

  Motherboard - MSI 2A9C (CPU 1)
  Manufacturer MSI
  Model 2A9C (CPU 1)
  Version xxx0204GRxxxxxxxx0
  Intel chipset provider
  Model of chipset Host Bridge Havendale/Clarkdale
  Chipset revision 12
  Southbridge Intel supplier
  Southbridge model H57
  Southbridge review 06

  Graphics - HP w2207 (1680x1050@60Hz) 512 MB ATI Radeon HD 5450 (MSI)
  Monitor
  Name HP w2207 on ATI Radeon HD 5450
  Course resolution 1680 x 1050 pixels
  Work the resolution of 1680 x 1050 pixels
  Active, primary, State support of output devices
  Screen width 1680
  Monitor height 1050
  Monitor the BPP 32 bits per pixel
  Monitoring frequency 60 Hz

  ATI Radeon HD 5450
  Manufacturer ATI
  Model Radeon HD 5450
  Cedar GPU
  1002-68F9 device ID
  Voltage v 0.900
  GPU clock MHz 650.0
  Core Voltage 1.000 V
  8.960.11.1000 driver version
  Version of the BIOS 113-AC50800-100 - MI
  Memory Type HyperMemory
  512 MB memory
  Width of the bus 32 x 2 (64-bit)
  Max power draw 20 Watts

  If there are questions please ask.

  Thank you...

  Hello

  The AMD 5450 in PC graphics card will support multiple monitors (VGA, HDMI and DVI).  The 5450 also supports AMD EyeFinity which allows bear monitors of odd size (different resolutions).

  You will get best results by using digital connections to the monitors.  It would be DVI HDMI for w2207 HP and Viewsonic.

  If you have specific questions about AMD EyeFinity, please consult the ATI/AMD forums.

  Good luck and thanks for posting on the HP Forum.

• Is there a simple model of blood pressure for 3.2.2 numbers

  I need a model simple blood pressure for 3.2.2 numbers or earlier. Because I don't have a working knowledge of numbers 3.2.2 I hope someone can help me here. I need an auto update of date and time, systolic and diastolic pressures, and a Notes column wider. Thanks for your help since an old geezer.

  There is no integrated model, however you describe what you can do by following the following instructions:

  (1) open a new document using the menu item "file > new...» »

  (2) choose the 'Basic' category on the left, then "Blank" of the selections available:

  

  (2) to facilitate the entry of the date and time, I suggest the creation of a single cell table, and then enter the formula = now().  To do this, follow these steps:

  Click and hold on the A2 from the table cell (until you see the 'lift' on the table cell.

  

  Drag the cell above your table on the screen.

  You should see a new table like this:

  

  Double-click the text "Table 2", then update the text therefore reads "TimeStamp" (it's just a name is not really important).  Select cell A1 in table 'TimeStamp', then type

  = Now()

  shortcut for this is

  A1 = Now)

  

  Now in the original table, name the columns as the "Date", "Systolic", "Diastolic" and "Notes"... like this:

  

  now make the column notes wide by selecting the column for Notes (column D).  To do this click on the "D" at the top of the column.

  Now open formatter table by clicking on the 'Format' button at the top right, and then by selecting the segment 'Table':

  

  adjust the value for the width of the "column" down as necessary

  to enter the date in a row, click the cell in the table "TimeStamp" and select the menu item "Edition > copy" (or use the + c key combination)

  now select the cell where you want the date and time, and then select the menu item "Edition > paste formula results.

  now enter the reading notes

• HP 110-210 desktop: HP 110-210 - is two monitors supported with this model?

  Hi all

  I was looking at to the top of the plug the graphics card, I have to this desktop computer, and it seems that both monitors are not supported. Can anyone confirm if this should be supported.

  Integrated graphics card is ATI Radeon 8330.

  I currently have 2 monitors. 1 DVI and 1 VGA monitor. I couldn't make them work together. I was planing to get a VGA to DVI monitor so I can dual screen but wanted to know if his support again.

  MSChmuty, welcome to the forum.

  Yes, it should work fine with two monitors.  Here's a guide that will help you make the connections.  Also, here is a USB 3.0 video adapter that will allow you to use one of the USB 3.0 ports on the back of the computer to connect a DVI - D monitor.  That would give you a better picture.  You can talk with the Service the customer of StarTech to determine where one of their adapters would be best for your situation.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Replacement of power supply, model HP Desktop A6200N

  The power supply on my model HP Desktop A6200N died. The power supply provided with the computer is a model electric Delta DPS-250QB-4 A, 250 W output. My question is this, I have another power supply made by HIPRO HP-D3057F3R model with a maximum capacity of 300 W, I can use this HIPRO power supply to replace my old power supply Delta without any complications? Any info would be appreciated, thanks.
  

  HiPro HP-D3057F3R seems to be a power supply HP OEM and should work correctly your desktop HP Pavilion a6200n. Before installing the HiPro in the computer, check the HiPro offers the same connections as the Delta. If necessary to take pictures where all the connectors go you come out of the Delta, so you don't miss any when you reconnect the HiPro.

• How to create the icon on the desktop just for SilverLight?

  How to create the icon on the desktop just for SilverLight?

  Hello

  • Why is it you are wanting to create a shortcut?
   
  Silverlight is a plugin for Internet Explorer and other browsers, Windows Media Center is to allow video playback which supports silverlight. You cannot create a shortcut for the same.
   

• BlackBerry Desktop Software for Mac

  Is there any version of Blackberry Desktop Software for Mac that recognize the device Blackberry Dev Alpha?

  I want to only copy a few screenshots of the device...

  Kind regards!

  Do stunts Target File System Browser