Chronology of Photoshop CC does not do anything - all gray out and unusable

Similar Questions

• Firefox does not work after all, uninstall them and reinstall.

  Very few of the buttons are used in the firefox menu. Add ons will not open the Manager. None of the buttons on the open Help menu, open only a few menu options. Does not work in safe mode. I completely uninstalled, went into effect the deleted data from the preferences file. Reinstalled several times and nothing... Kind of frustrating. Any ideas?

  In case someone else runs into this I thought about it. I had to remove the program, remove the Preferences folder in Appdata, then click on registry local machine > software > mozilla and then delete the registry keys. There are three folders, I don't remember the exact name, but they all began with Mozilla. Once I did, I rebooted and reinstalled. Now it works...

• XP. Plug n play does not work. Spooler went out and destroyed printers. Fixed and it came back that others didn't. HP 4215xi

  Cannot re - install my HP4215xi!  Plug-and-play won't work.  Driver updated and when I try to install with the software says CD more recent is in my computer.

  Hi Stanton,

  I suggest you to follow the steps and check if it helps.

  Method 1: PEd a clean boot and then check to see if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state to start your computer normally.

  Method 2: Uninstall all the drivers and software for your printer and try to install the software.

  Method 3: You can also check out the link below.

  HP Officejet 4215 All - in - One Printer series

  If the problem persists, you can contact HP support and check if it helps.

  Technical support for your HP product

• HP envy 4502: point stuck in the queue does not print anything, tried to delete and always blocked

  tried to remove the item to print several times, still stuck, unable to print anything now

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning.

  Download and run printing HP and doctor Scan quickly and automatically perform several tasks of troubleshooting.

  When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.

• Problem with Photoshop CC does not work after update

  I downloaded and installed Photoshop CC yesterday and worked with it without any problems. This morning, the cloud said that there is an update

  So I installed which.

  Now, the program will open but it does not meet anything, I can't access any of the Menus or load an image. The only way I can close

  is the hit Control-Alt-Delete.

  What can I do to fix this?

  David

  Hi dneely101,

  Please see the Ko: http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html .

  Kind regards

  Romit Sinha

• Problems connecting to a projector. Laptop recognizes the new monitor but projector does not display anything.

  I have a Macbook Pro (non-retina display) mid-2012. I have a mini VGA screen that worked throughout the year and all of a sudden, it doesn't seem to work. My computer recognizes the new monitor (screen flickers and flies all content secondary screen) but the projector does not display anything. I tried to reconnect the cable, the cable VGA switch to turn on the projector and turn off, restart my computer and clouds of dust on the connections. Sometimes if I move the connection just that will work, but if I so much as breathe on it or watch funny it stops and I can't get it back.

  Jiggle the cable or adapter is something different, you have a physical adapter or cable problem. Any bit-reversal can help that.

• Qosmio G50 - 115 - DVD drive does not burn anything

  Recently tried to do a recovery plus two discs but the player refused to burn but come with 0E01B5-26-2AO444D9 error Code.
  In fact, it does not burn anything but will play.

  Hello

  Have you tried different CDs and DVDs from different manufacturers?
  You must proceed as different disks from different manufacturers are not 100% compatible.

  I had similar problems, burning data to CDs or the different DVD
  Then I tested the drives from different manufacturers, and that was the key!
  Everything worked properly!

  I made good experiences with disc Verbatim and TDK R (CD and DVD)

  I think you should also test some discs

• The browser again download the latest applications at the top but it does not download anything.

  Firefox rpet "download the latest applications" just above the faucets, but it does not download anything.

  This has happened

  Each time Firefox opened

  == I removed some aps of firefox

  Tools > Addons > > Extensions

  You have a MSN or Bing extension installed?
  If so, disable it.

• Satellte C870 (PSC8EE) - display driver for Win8 does not install anything

  Hello

  I have a Satellite C870 bought in October last year.
  I have level of Windows 7 to Windows 8 a first time just before Christmas and has worked well.
  (A few small issues suchas as necessary before installing the display driver, but all Bios Update worked fine)

  A few days ago I had a system crash and the HARD drive died.
  Send the Sateite to replace HARD drive and came with Windows 7

  Has started the last installation of evening back to 8 64 window.
  But the display of the Toshiba site driver does not install anything? Catalyst still not...
  Just get the request to confirm if I want to install the product and then nothing...

  Tried the two drivers offered from the 19/02 and 26/02, but with the same result...
  Tried to install the driver directly from AMD announcement was a message my card was not supported
  I tried Windows 7 driver from Toshiba site for my machine and got the same message...

  Graphics card is an AMD 75610 M

  And of course I have admin access and also tried to run the installation in administrator mode files.
  And other drivers install normally (Lan Drivers, drivers Wifi, Tempro, mode eco etc.)

  Thanks for your help

  Hello

  The driver that you downloaded is a zip package.
  Unzip everything first.
  Then you will see a single .exe file in the unzipped folder.
  This exe file is also a package.
  Therefore, unzip the .exe file too.
  Right click on the exe file and select unpack here
  Now, you will have access to the files together. Now choose Setup.exe or Install.exe

• Satellite M30X-111 screen does not display anything but the external monitor works

  My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

  Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

  How can I solve this problem?

  What do you do? You want to recover the laptop?
  If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

  But this question seems that you have accidentally switched to external display.
  I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

• Estation c510a: replaced C510 printhead to no black printing, now it does not print anything!

  A few weeks ago, my printer started printing black as a very light gray. I replaced all cartridges, removed the print head and tried to clean the contacts on the back. From advice on the HP website here, I bought a new print head. Just installed and reinstalled the fundamentally new cartridges. He gave me that a message about old print cartridges may not have enough to complete the new initialization of the print head. I just rejected because the cartridges are fundamentally new (XL version, no less).

  Now, the printer does not print anything. He's not even trying. Zineb screen shows he gets something to print, but it is just there to always say "now printing...". "without actually doing anything. There is an occasional (perhaps every 10 seconds) inside the printer, the noise that resembles something moves back, but it never attracts any document.

  As far as I know, HP has decided that without cartridges NEW NEVER OPEN, my printer is now a brick with a shiny new print head $85.

  Yes, I tried to copy with the same results.

  Help, please. I really want to spend a different $70 on new cartridges and lose the new game that is already there!

  Hi @skills4lou,

  The printhead you bought must carry a parts warranty. I'll send you a PM with some information to help. If you are unsure how to check your PMs, here is a post that can help - How to check your messages.

  If it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

• Z400 Lenovo Ideapad Card Reader does not detect anything

  I have installed the lenovo z400 appropriate card reader driver, restarted my laptop...

  inserted my sd card, then the laptop does not detect anything, pls help!

  PROBLEM SOLVED!

  I just kept my laptop mode "sleep" for 20 minutes, when I opened it back, something has been installed, then I saw that it was the driver of the card reader.

  Card reader works now!

• can not be run Zoo Tycoon, when the running game does not appear anything, help me! my computer is Win7

  original title: subject zootycoon
  my computer can not be run Zoo Tycoon, when the running game does not appear anything, help me! my computer is Win7

  Hello

  1. what version of Zoo tycoon you play?

  2. is it works much earlier?

  I suggest to run the game as administrator and check.

  I suggest you to follow the steps from the links and check out.

  Improve the performance of your computer game

  http://support.Microsoft.com/kb/815069

  The problems of the game performance

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

• I am running Xp SP2 Windows does not update anything more and gives me [error number: 0x8024400A] Why can't update Windows again?

  I am running Xp Sp2 and about a month, there are, I tried updating to SP3 (new) and it sends my computer fits in. It keeps just reboot and reboot (SP3 has always done this has my computer since its release). I had to do a cover of the plant to return to the place where he could start normally but now Windows does not update anything. I go to Windows Update, it goes through the motions of checking to see if everything is legitimate, click the express button and gives me "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. [Error number: 0x8024400A]   After going through the links provided and find no solution the last link sent me here. So why can't update Windows?

  Hi kriplurr,

  Thank you for keeping us posted about the State of the question.
  I'm glad you are able to run the updates.
   
  You can download the Windows Installer under the following link and check.
  Windows Installer 3.1 v2 (3.1.4000.2435) is available
  seehttp://support.Microsoft.com/kb/893803
   
  Or you can download it directly at the following link.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=25
  (a) click on the above link.
  (b) click Download next to WindowsInstaller-KB893803-v2 - x 86-.exe
  (c) install and check.
   
  Hope this information helps.

• When running Disk Cleanup, it does not remove anything to "Compress Old Files'.

  When I run my disk cleanup, it does not remove anything to "Compress Old Files' during cleaning.» Why not? I also need more disk space to defragment and I deleted all the programs that I don't use, but is not yet give me enough disk space.

  Compress old files not removes all files, compress files that are rarely or seldom used.

  If you get the low disk space, less than 15-20% free space, then you need to collect as much space as possible. However, the amount you get will not be a solution, only a temporary fix - it that.

  To add or remove programs and Windows components in Control Panel, you can uninstall programs as your plue no use - if you have. Not to be far uninstalling programs, you do not recognize, many elements are required for other programs work properly.

  Uninstall or change a program
   http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  You can also check to see how much space is reserved for the restoration of the system; by default, many GBs are usually reserved. Also disable hibernation as the file created can be 2-3 GB, sometimes even more.

  You must also consider moving your files and folders on a removable media, such as DVDs or an external hard drive. Still a great flash drive with 4 + GB of space can help, and their prices are reasonable these days.

  In addition to Disk Cleaner, you can consider running CCleaner. This is a free program that will remove the unnecessary and temporary files temporary Internet files of the most popular and many browsers other caches that can be cleaned safely.

  Since you are using Windows XP, there is a setting in CCleaner to remove the uninstallers of patches; These are the Windows Update files you've downloaded and installed over time and are there if you ever want to uninstall the update. But you can save these CD/DVD and then remove them safely from your system to recover the space. If you have ever removed one of these, you may be able to get beyond 1 GB of space.

  CCleaner
   http://www.Piriform.com/CCleaner

  If you decide to try it, by default, that almost everything in Windows Applications and is verified to be cleaned. You must first review the lists (they are compiled by what you have installed) and check/uncheck accordingly.

  Then click on analyze to see what will be removed (nothing is deleted when you click Analyze); When the scan is finished you can double-click on (or right click and select view detailed results) of the entries in the list to get more information.

  According to the detailed results, you can right click for options such as adding to the list of exclusions if you want the deleted item.

  Once that you are completely comfortable with your selections, you can click the run Cleaner button and then OK to put warn before vacuuming will run.

  CCleaner is also a registry cleaner that I don't recommend that you use - even if you have successfully run a registry cleaner in the past, it is quite possible that the next time will bring serious problems; they are not worth the risk...

  TechRepublic has just published this article about CCleaner:
  5 tips for using Ccleaner for degunk your system

  http://www.TechRepublic.com/blog/five-tips/five-tips-for-using-CCleaner-to-degunk-your-system/767?tag=nl.E101

  CNET editor's review:

  http://download.CNET.com/CCleaner/

  I know that this was not the miracle that you can have hoped, but personally recommended solution is a new, larger hard drive. In the case of desktop computers, an additional hard disk is useful for your personal files, especially for music, movies, photos and more.

  I hope this helps.