Cineware - extraction of animated objects get grooved before be cooked :/

Similar Questions

• Animated objects does not move until the final destination.

  I am using captivate 9, and since then the upgrade 8, I have noticed that if I do a simple animation (fly down for example) on an object and do not change the trajectory at all, the animated object actually never to the final destination.  The question is even worse if I shorten the time of the animation.  Everyone has noticed this or have any suggestions?

  If you are still on the first version (version 9.0.0), please install the hotfix released earlier this week to upgrade to version 9.0.1. What you describe sounds like the bug that was in the first version, fixed with the patch. But since there is now a patch, easy to install using help, updates, no need for the fix that had to be installed manually.

• animated object lose resolution... Please help.

  I created a vector tree in Adobe illustrator and imported After effects, I then went to three of the images by exposing after effects then compensatory two objects of a pixel in 6 pictures and when he looped has a feel that is animated to the vector.

  The 3 images are constantly looped while 6 images. I then dialed before this sequence and have created a sequence of 5 min of this still tree that appears animated.

  The problem I encounter is that I want to zoom in and out of this still lively tree but when I zoomed in, he loses the resolution.

  I think that I am not able to do in component, y has solutions to this?

  I posted the video here and it is the video I want to zoom in and out of, but how can I do so that he loses no resolution?

  http://www.YouTube.com/watch?v=tvgdkJk0U6g

  For each of the layers in the nested computer, you must switch Constinuously Rasterize. This will preserve the evolving nature of vector graphics.

  

  For more information, see continuously rasterize a layer containing vector images in aid of EI.

  But, since you're amplify the demo with its "property own scale, you must also enable collapse Transformations for the demo." It's exactly the same key as continuously rasterize, but when it is used on the nested compositions, it's called Transformation of collapse. It connects the properties of a pre-comp with the same properties for nested layers, so that the demo gets smart about things like values of scale combined, etc.

  For more information, see make order and transformations collapses.

• Animated object and Threading

  Hello

  I want to animate certain objects on the stage and allow the user to interact with them. My current solutions uses the timer class to deal with because (that's what I heard) air / the playbook does not support multithreading (yet).

  Now, I heard that the timer class is not very accurate, and really, I have determined that the animations aren't very smoove. Is there another way to solve my problem?

  concerning

  Levi

  While the PlayBook itself certainly supports multithreading (there are 154 lapping my Simulator right now!), there is basically no thread support in ActionScript, or air.  Fortunately, most of the time you can get by fine without using various techniques.

  Depending on the nature of your animation, you'll want to look in one or more of the following:

  1. The "ENTER_FRAME" event.  You will find many examples of this.  Flash programs have a 'frame rate' (essentially like a movie) and can respond to the events that are sent once per image.  The Flash docs treat these in various places (although sometimes they assume that you are not purely working with ActionScript).
  2. Using the class Tweener easily call periodic changes to one or more properties of an object any.  It is by far the easiest for many simple animations, such as dynamically move buttons.  It is readily available in the PlayBook with "import caurina.transitions.Tweener" so there is no good reason not to use it if it is appropriate for you.
  3. The class Timer you have found.  It is not "correct", but for what?  It is usually quite good, and the lack of accuracy (inaccuracy?) is no different from what any timer mechanism has in an environment no real time (and make no mistake, just running on top of the incredible QNX does little to make Flash applications that all "realtime" more than what they is on other systems).  You should get results very similar to a timer, as you would events chassis or other things.
  4. flash.utils.setTimeout or setInterval can do base calendar, although they would be considered a very low average level to do so.  I think they build right on top of timer, so there is no advantage to the use of these except an extreme simplicity.

• Animations/videos page load before coming to this page

  I have a new publication features full page edge animations and videos full-page produced for effects as well that many pages of copy, object States and scrolling images etc... But I find a lot of edge Animations/videos play on the pages before as I have for them. This means that they have played and are already on the frame of the end.

  Then I have to browse to the previous page and go forward again quickly so that he can play from the beginning.

  I've had this on some publications now. Someone knows how to fix this? I have a customer presentation later today and need to try to fix before this meeting! Thank you.

  The value of the retard.125 seconds to avoid this problem.

• Animated buttons Get to Work in DPS (InDesign 6.0) can not help please!

  In the DPS tips, using the iPad app, some of the navigation buttons appear as buttons SWF, but I can't the SWF in DPS button. I have tried with e, but cannot get that to work either. Can you tell me how to get a SWF file as a button to work in DPS - I work with ID 6.0.

  You have an eaasy answer? Y at - it a tutorial there, I can see? Is their a step by step, I can read?

  BTW, I do not understand how to work the buttons and the types of events that work in DPS.

  Thank you

  Lain Kennedy

  What exactly are you trying to do when you say "rollovers". Do you mean that the switch itself has applied animation? DPS does not support the animation of InDesign features.

  App DPS advice of Bob in the itunes store has several good examples of use of the buttons and multi-state objects.

  Neil

• Problem with Cineware 4 d and object buffer

  I fight to add a C4D file with a receiver of the shadows in a scene AE.  I don't know that it worked before as I have updated recently, but maybe I'm just made bad.

  I'm under 13.2.0.49 AE and C4D 16.028 Lite

  I have attached a screenshot of C4D where he makes beautiful and that of EI where it is not.  I used four layers in a multi-pass; Top is ambient occlusion, then Configuration of buffer object activated the label of composition for my text, then one layer RGBA and finally a layer of shade.  I value the workspace sRGB and selected linearize and working in 32-bit.  I tried 16 bit as well and same problem.

  Somehow, with this configuration, I lose my object solid.  Can anyone offer any suggestions?

  

  

  I was talking about the update I received in C4D Lite.  Now that CC 2015 is out, I removed the old version of Ae and installed a new and BAM! This works.  Can we ask them do not break once again... lol

• The animation playback of EDGE before coming to the page in an Article

  Hello

  I've created an animation on BOARD, and he plays before entering the page in an Article.

  I created other animations and places in articles and other folios, but on this point, it does not play correctly. I wish she could play to enter the page or go to the page. but, when I enter the page already has palyed. Maybe you have some advice or answers?

  Thank you

  L

  The overlay play when article is preloaded. To resolve this problem, set a small delay of 0.125 second.

• Fastest way to cut a group of objects with less before?

  I copy the object used for cutting, paste in front of each object and use less front several times for all objects that is not a great fun for a larger group of objects. Is there a faster way?

  Draw a straight line where you want the cut to be.

  Keep it selected, then object > path > divide objects below.

  This works pretty well on most things, but you will need to make a few adjustments special if they are filled and the contours of objects that need to be divided.

  Otherwise you will get the features along the demarcation line.

• ERROR file binary content get called before writing file site to stream site

  This message in Adobe Muse during the export of the page: error called SiteFile.GetBinaryContent called before SiteFile.WriteToStream

  What is c? I can't export the document and I don't know what to do.

  Help please

  This problem has been resolved with 2015.2.1. You are on the last update? Select help > everything in the application of Muse to find your version number.

• dDocName in the resultset object gets a higher than the local variable preference: unable to set dDocName by linking using Idoc Script

  Hello

  I have the following code built using idocScript

  < $dDocName = $NomVariable >

  < $executeService ("DOC_INFO_BY_NAME") $ >

  Note: NomDeLaVariable value contentID for that 'DOC_INFO_BY_NAME' has to be executed.

  When I run this, I see that DOC_INFO_BY_NAME is getting executed for an ID of previous content that he was 'dDocName '. In other words, after allocation

  < $dDocName = $NomVariable >

  Does not take effect.

  I think that the value is not updated in the binder. How can I fix it.

  It is bit urgent, any help would be greatly appreciated.

  Thank you and best regards,

  Steven K.

  rsBlogPostings (copy of results of research) already has dDocName column and when you call executeService in a loop, resultset a preference on the local data. (I faced something similar and had no luck with #local.dDocName)

  (1) you can renmae the dDocname column in the rsBlogPostings using rsRenameField

  (2) if it does not, create your own loop as below

  <$iCountEnd =="" rsnumrows("rsblogpostings"),="" icountstart="1$">

  <$exec rsfirst("rsblogpostings")$="">

  <$loopwhile lcountstart=""><= lcountend$="">

  <$postAuthorImageEntry = ="" ssincludexml(rsblogpostings.ddocname,="" "blog_entry/authorimage/node()")$="">

  ...

  ...

  <$dDocName=authorContentID$>

  <$executeService("DOC_INFO_BY_NAME")$>

  <$exec rsnext("rsblogpostings")$="">

  <$lCountStart =="" lcountstart="" +="" 1$="">

  <$endloop$>

• Multiple Instances of calling object getting Error #1009

  Hello

  I think it must be a logical explanation for this. I have the code here as follows:

  private void action (): void {}
  
  thematicMap.passBox (canvas, regions);
  thematicMap.drawthematicMap.passBox (canvas);
  
  Definition of the Web
  thematicMap.setCanvas (0,0,30,50);
  thematicMap.drawthematicMap.draw (regions);
  thematicMap.setCanvas (24,24,453,455);
  thematicMap.drawthematicMap.draw (regions);
  }

  This opens two instances of the thematicMaps, which is what works in main.zip. However, what I really want to do is the following:

  
  private void action (): void {}
  
  thematicMap.passBox (canvas, regions);
  thematicMap.drawthematicMap.passBox (canvas);

  a = new ThematicMap();
  b = new ThematicMap();
  
  Definition of the Web
  a.setCanvas (0,0,30,50);
  b.setCanvas (24,24,453,455);
  
  Draw
  a.drawthematicMap.draw (regions);
  b.drawthematicMap.draw (regions);
  }

  The output of the application below is only a blank screen. I then studied and added some try and catch clauses to see what errors there are.

  try {}
  Definition of the Web
  a.setCanvas (0,0,30,50);
  b.setCanvas (24,24,453,455);
  }
  catch (errObject:Error) {Alert.show ("an error occurred:" + errObject.message) ;}}

  The results I got was #1009 Error. How come that I've provided parameters and return is a null reference object?

  Thanks for your help.

  Alice

  Jin

  the null object reference must be provide a lot more information, and the question could be to what a & b relate to, is thematicmap, a component or a class that relies on the scene? More code is needed to see what is what.

  David

• the following statement of RUN_REPORT_OBJECT get run before he finishes

  Hello
  I'm generating a report using RUN_REPORT_OBJECT (of REPID, List_id)
  And after this statement, I send you this report as an attachment (with some subject and message).
  The email sometimes goes before generating the report with no attachment.
  Could you please tell me how can I avoid this?
  
  concerning

  You don't need the loop if you run the SYNCHRONOUS report:

  SET_REPORT_OBJECT_PROPERTY (v_report_id, REPORT_COMM_MODE, SYNCHRONOUS);

  See the examples in http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf

• I lost my send button-I-I need to download Thunderbird 17 to get help before trying the solution?

  I hit a button by accident and my send button is missing. Assistance idea was to use the "application menu" on thunderbird 17; " There were specific steps - but I don't know the version of Thunderbird, I now.
  y at - it an easier way to return the button send?-if I have to download thunderbird 17 first, fine, but I need help to do that, too.
  It's a most bothersome thing--this is the second time this has happened - why is it such a not vulnerable problem - why the toolbar disappears so easily?

  In the main menu of the compose window bar:
  Display - toolbars
  Check the 'Composition Toolbar'.

  In the case where the menu bar is hidden so press Alt or F10 to bring it back.

  I don't know what you're doing to your menu bar disappears, but is really not difficult to bring him back.

• I can't get my (before opening) incoming e-mail list to appear.

  I must have hit some wrong button because I can't go back to my opening list emails (no-deleated) screen. There are tabs across the screen from the top view of (now big screen), which represent a bunch of old, perhaps archived by year, emails. Hitting the tabs brings up that the e-mail message, and none of the tabs seem to come back to me to my regular opening screen. Closing of Thunderbird does not reset anything, and turn refers to the email previously on the screen, not the opening list screen.

  Go to the leftmost tab, right click on the tab to the left - close other tabs