Cisco Ironport Cluster functionality

Similar Questions

• Need help on the centralized on C160 Cisco Ironport appliance management feature.

  Hi all

  I searched the internet but I have found no relevant article on how to enable and configure on device Cisco Ironport centralized management functionality. Here are some details:

  IronPort appliance: C160

  Centralized management of the feature license: Yes purchased

  If someone can help me with a link or article or screenshot or a document prepared by any individual will be useful.

  Thanking you in advance.

  Kind regards

  Ritesh Hegde.

  Hi Ritesh,

  Centralized management is well covered in the manuals. If you're on 7.6 in the chapter of the Advanced User Guide 8.  You can also use the online help which has the same information (make sure you spell centralized with a 'z' not an "s").

  Centralized management is essentially about how to manage a set of devices in a cluster, and if you configure that you configure all.

• Questions of pre-installation on IPS on Cisco ASA Cluster

  Hello

  I'm looking for some configuration directives and IPS.

  I have a Cisco ASA Cluster with an IPS Module and I would like to know the best way to go about setting it up.

  We have a customer who requires their web servers to be protected with the IPS Module.  I have the following questions:

  1. is it possible to install the IPS in learning mode type to see what kind of traffic is hitting?

  2. can you syslog alerts?

  3. is it possible to use snmp around alert also interrupts?

  4. If you put it in promiscuous mode (SDI) what it means when you receive an alert about a possible attack, an administrator must log on the

  Firewall and block traffic if they choose to do so?  Is it possible for an administrator to block traffic (or leave if his)

  a false positive in IPS) without having to connect to the ASDM?  If you have a scenario where you don't want to give users access to

  the firewall, what is the best way to go about this?

  5. is it possible to set up an alert that if this is a DDOS email alert, if it's a handshake of split then just syslog alert?

  6. I'm afraid that if I put it with a profile he can start blocking valid traffic.  What is the best way to start with IPS to protect

  a server?

  7 if its possible to syslog, what kind of detail is the capture of syslog?  Need name attack, etc.?

  A lot of questions!  I hope someone can help

  Thanks a mill

  1. is it possible to install the IPS in learning mode type to see what kind of traffic is hitting?

  Yes. There are several ways to do this, but the easiest way is to put the sensor in promiscuous mode (in the config of the ASA)

  2. can you syslog alerts?

  N ° the cisco IPS OS doesn't support syslog.

  3. is it possible to use snmp around alert also interrupts?

  Yes. But you must set the 'action' on each signature that you want to send a trap.

  4. If you put it in promiscuous mode (SDI) what it means when you receive an alert about a possible attack, an administrator must log on the

  Firewall and block traffic if they choose to do so?  Is it possible for an administrator to block traffic (or leave if his)

  a false positive in IPS) without having to connect to the ASDM?  If you have a scenario where you don't want to give users access to

  the firewall, what is the best way to go about this?

  Who should perform the analysis of IPS events have generally sufficient privilege and access to make any changes necessary to your firewall security and IPS sensors. It takes time, knowledge and skills for the analysis of the IPS. Most customer do not have the resources to do the job that you describe.

  5. is it possible to set up an alert that if this is a DDOS email alert, if it's a handshake of split then just syslog alert?

  No syslog. You can set alerts email on a per-signature basis.

  6. I'm afraid that if I put it with a profile he can start blocking valid traffic.  What is the best way to start with IPS to protect

  a server?

  Start in "Promiscuous" mode and see what hit the signatures. Investigate them, adjust your false positive until you have a tight game, an action of signatures. Then switch to online mode.

  7 if its possible to syslog, what kind of detail is the capture of syslog?  Need name attack, etc.?

  No syslog.

  -Bob

• SX20, MX300 and Cisco C90 multisite functionality

  Hi all

  Someone has information on how to Install Licenses Multisite L-C90-MS, LIC-MX300-MS and MS-SX20-LIC?  These is installed directly in the codec? what procedure?

  Thank you very much!!

  Mario,

  This is the option buttons that you add directly to the codec. Just go to maintenance > upgrade and paste the option key pressed in the key field of the option. This usually requires a restart when completed.

  Adam

• Vcs Tandberg and Cisco VCS control

  Hello

  I have a client with an old would invest video and new servers.

  Old video servers

  Control system Tandberg video Communication Server - part number = 117500

  Application of Tandberg video Communication Server Expressway - part number = 1163402

  New video servers:

  VCS License Control - Part Number - R-VMVCS-CTRL-K9

  VCS Expressway License - Part Number - R-VMVCS-EXPWY-K9

  According to Cisco x8.2 Clustering:

  -Each peer runs on a hardware platform with equivalent functionality; for example, you cannot cluster one
  peer running on one core 2 average VM with peers running on base 8 large virtual machines

  Means that the physical old VCS cannot be grouped with new virtual VCS.

  Thank you.

  Hi zizou.

  You can include a device VCS with a VCS VM as long as their matches of software and their hardware platforms have equivalent capabilities.

  Device VCS clustered with VCS VM running on core 2 MediumVM = YES

  VCS machine clustered with VCS VM running on 8 cores LargeVM = No.

  "you can even cluster that are running on the standard devices with peers running on core 2 Medium VMs, but you can not group a peer running on a standard unit with peers running on base 8 large virtual machines.

  (p.4)

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/VCs/config_guide/x8-7/Cisco-VCs-cluster-creation-and-maintenance-deployment-guide-x8-7.PDF

• Extract specific data from cluster

  Hello

  I have an IMAQ FindCircles Vi where I want to extract the corresponding RADIUS given (in the detected circles) only. Currently I use Unbundle by name and manually select the RADIUS, however this method is impractical when it comes to images where a lot of circles is detected. The following picture describes my situation:

  

  I want to streamline this process so that the program automatically retrieves the rays without me having to do it manually. Help is dearly appreciated.

  Hello

  Rather than convert the table of cluster in a cluster of clusters (using the table in the cluster function) just browse the table thanks to a for loop. The for loop allows you to retrieve the value of the RADIUS to the unbundle help based on the name. In this way, you can deal with any number of detected circles. Please see the attached picture for an illustration...

  

  I hope this helps!

  Kind regards

  Dave.

• Problem on the out of the loop For of Cluster

  Hello!  I'm using Labview 2009.

  I have a problem in the transmission of the indexed number of a loop through function array-cluster to a cluster. Please check my attachment... The problem is, he always says the number of items in the numbers indexed is 9, any number of loops, I input for loop.

  This problem has been solved before? I could not find any related post here...

  Raymond

  Hey Vg,

  You have to right click on your table to the cluster, goto 'Size of Cluster' function and select, in this case, 2.

  RGS,

  Lucither

• An array of type cast to the cluster

  Is there a real difference between 'table of cluster' function, and simply type casting to a cluster?  The image below shows a simple example.  Apart from providing the names of each element of the cluster, type cast function automatically sets the size of cluster, which is a nice feature when you work with a typedef.  I really wonder if there is any downside to type casting when elements of array and cluster are the same type of data.

  Thanks in advance.

  

  Type casting man knows where I live, so my opinion is biased.  When I have to do such a conversion, which is hardly ever, but does not match ever, so I'm going with the Type Cast.  You hit the bigger points, meaningful labels and ease to spend six to seven to eleven elements with Type FED.  When I do this conversion it is usually because I have to do a magic of property whose tables do not permit (all components need to share properties with the exception of value).  Creating a table of function control Cluster is say a Clusterflop, according to the Type casting, exactly what I'm looking for.  In addition, table in the Cluster service performs a code obfuscation, is always maintained at 9 elements, and otherwise must disappear, or at least that:

  http://forums.NI.com/T5/LabVIEW-idea-exchange/remove-default-behavior-from-array-to-cluster/Idi-p/17...

  First of all, ask yourself if you really should do this, if the answer is Yes, then I say Cast of Type.

• SQL Server 2005 unattended install using the script fails on Windows 2003 Cluster

  We strive to perform the installation without SQL Server 2005 via the script assistance, but the installation fails on Windows 2003 Cluster, we use Windows 2008 with HyperV running a DC with two nodes (all Win 2003). Script is...

  Start/wait setup.exe/qb VS = INSTALLVS SQLTEST = SQL_Engine INSTANCENAME = SQL123 ADDLOCAL = SQL_Engine ADDNODE = sqlnode-1, sqlnode-2 GROUP = SQL1 IP = 192.168.1.85, SQLNetwork ADMINPASSWORD = Windows8! SAPWD = Windows8! INSTALLSQLDIR=%ProgramFiles%\Microsoft SQL Server\ INSTALLSQLDATADIR = G:\SQLDATADIR\ SQLACCOUNT = SQLPASSWORD lab\sql_svc = Windows8! AGTACCOUNT = lab\sql_svc = Windows8 AGTPASSWORD! SQLBROWSERACCOUNT = SQLBROWSERPASSWORD = Windows8 lab\sql_svc! SQLCLUSTERGROUP = "lab\sql_grp" AGTCLUSTERGROUP = "lab\sql_grp" FTSCLUSTERGROUP = "lab\sql_grp" ERRORREPORTING = 1 SQMREPORTING = 1 SQLCOLLATION = SQL_Latin1_General_CP1_CI_AS

  Errors on the nodes:

  SQLSetup0008_SQLNODE1_Core (Local)

   Running: InstallSqlAction to the: 4/14/2012 22:56:39

  Installation: sql on target: SQLNODE1

  Waiting for remote setup (s) to prepare

  Remote Setup (s) is ready

  Problem of determining the State of the virtual server for the package: '1' because of the exception of data store:

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: CachedPropertyCollection::findProperty

  The source line number: 63

  ----------------------------------------------------------

  Could not find the property 'VsDataPath' {'PackageIdStateScope', ' ', '1'} in the cache.

  Source the name of the file: datastore\packageidstatescopecollector.cpp

  Compiler timestamp: Wed Aug 24 13:40:04 2005

  Function name: PackageIdStateScopeCollector::collectProperty

  The source line number: 115

  ----------------------------------------------------------

  dataPathValue is empty

  Cluster functionality detected: SQL_Engine

  Loaded DLL:C:\Program SQL Server\90\Setup Bootstrap\sqlsval.dll Version: 2005.90.1399.0

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: CachedPropertyCollection::findProperty

  The source line number: 130

  ----------------------------------------------------------

  Unable to find property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"} in the cache

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: VirtualServerInfo.IPResources

  The source line number: 113

  ----------------------------------------------------------

  Could not collect the property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"}

  Transact package threw an exception.

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\highlyavailablepackage.cpp

  Compiler timestamp: Mon Aug 29 01:18:42 2005

  Function name: sqls::HighlyAvailablePackage:manageVsResources

  The source line number: 490

  ---- Context -----------------------------------------------

  SQLs::HighlyAvailablePackage:preInstall

  SQLs::HighlyAvailablePackage:manageVsResources

  m_dataDirPath is empty

  Cluster API threw an exception during operations of virtualization.

  Package first notify: 13

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\highlyavailablepackage.cpp

  Compiler timestamp: Mon Aug 29 01:18:42 2005

  Function name: sqls::HighlyAvailablePackage:manageVsResources

  The source line number: 490

  ---- Context -----------------------------------------------

  SQLs::HighlyAvailablePackage:preInstall

  SQLs::HighlyAvailablePackage:manageVsResources

  m_dataDirPath is empty

  Cluster API threw an exception during operations of virtualization.

  SQLSetup0008_SQLNODE2_Core (Local)

   

  Local configuration can complement

  Running: InstallSqlAction at: 4/2012/14 23:23:57

  Installation: sql on target: SQLNODE2

  Informs the package is ready to start: 0

  Waiting for notification start installation

  Local configuration can begin installation

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: remotepackageengine\remotepackageinstallersynch.cpp

  Compiler timestamp: Wed Aug 24 13:40:17 2005

  Function name: sqls::RemotePackageInstallerSynch:preInstall

  The source line number: 128

  ---- Context -----------------------------------------------

  SQLs::InstallPackageAction: perform

  SQLs::RemotePackageInstallerSynch:preInstall

  Abandonment of the package: "sql", due to an error from the configuration of the host: 13

  Notify all ready to commit: 13

  Notify all ready to put end to: 13

  Waiting for notification complete installation

  Local configuration can complement

  Packaging return code: 13

  Complete: InstallSqlAction at: 4/2012/14 23:23:59, returned false

  Error: The 'InstallSqlAction' Action failed during execution.  Error during execution information:

  Target collection includes the local machine.

  -----------------------------------------------

  Error: The 'UninstallForRS2000Action' Action failed during execution.  Error during execution information:

  Action: "UninstallForRS2000Action" will be marked as failed due to the following condition:

  The condition 'rs has been correctly upgraded level.' returned false.

  Package installation: 'patchRS2000' failed due to a precondition.

  Running: ReportChainingResults at: 4/2012/14 23:24:1

  Error: Action "ReportChainingResults" threw an exception during execution.

  One or more packages could not be installed. See logs for details of the error. : 13

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\sqlchainingactions.cpp

  Compiler timestamp: 1 Thu Sep 22:23:05 2005

  Name of the function: sqls::ReportChainingResults: perform

  The source line number: 3097

  Please notify.

  Assani

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  Hope this information helps.

• Undeliverable: - Cisco C170 - 5.4.7 - delivery has expired (too old message) [default] "[Errno [54] connection reset by peer" (delivery attempts: 75)

  Users just began having problems sending e-mails of Group of 10 recipients or more towards the outside email addresses. Internal email works well. But everything goes to an external address like gmail, yahoo, hotmail and others all come back reshipped 5.4.7... They are able to send 1 at a time or a couple at a time outdoors and they cross very well. We use the Cisco Ironports C170. We have the number of retries set to 100 and time in queue 259200 seconds. We just made some updates on the Ironports... 9.5.0 - 125.

  Any help or ideas troubleshooting would be great! We are new to Ironport only one of them was about a year and so far they have been great up to this problem.

  Thank you

  Matt

  Hello Matt,

  Get the message tracking details. This is GUI > monitor > message tracking

  Find e-mail, and then click "view details".

  According to the newspapers, from what I can tell so far in the blink of an eye, it's a little like an interruption of port 25 which passes on your network, that the emails are delivered, some are arrested with soft bounce (terminals).

  From a trial of mxtoolbox, (judging by the tophosts, your internal domain name is besd.net)

  We are witnessing ESMTP inspection enabled on your firewall, we can ensure that it is disabled completely, as it is one of the main causes of the problems.

  Login to 205.121.132.141

  220 * [813 ms]
  EHLO PWS3.mxtoolbox.com
  250 astark.besd .net
  250 8BITMIME
  SIZE 250 18877239 [656 ms]
  MAIL FROM:[email protected] / * />
  250 sender [email protected] / * /> ok [656 ms]
  RCPT TO:[email protected] / * />
  550 5.1.0 # address rejected. [656 ms]

  Login to 205.121.132.143

  220 * [ms 641]
  EHLO PWS3.mxtoolbox.com
  250 afury.besd .net
  250 8BITMIME

  Thank you

  Matthew

• IronPort SSH Keys vulnerability patch

  Hello

  customer is running WSA 8.8.0 - 085. In the web pages of upgrades available, we show the file "vulnerability cisco-sa-20150625-ironport Fix SSH Keys." When you try to apply it, web pages and the CLI, such as suggested by RN, it shows the patch as it has already applied:

  Check if "Vulnerability Cisco-Ironport SSH Keys" patch is required
  Patch 'Vulnerability cisco-Ironport SSH Keys' is already applied
  Facility upgrade is complete.

  I think it's BECAUSE WSA has been upgraded after June 25, a release already includes this patch.

  Question:

  -How can I be sure that SSH keys are ok?

  -Why the patch stay in the upgrades available? Can I delete it?

  Thanks in advance

  Hello

  Thanks for reaching out, here is the link that provide details around this:

  https://supportforums.Cisco.com/blog/12543046/multiple-default-SSH-keys-...

  and what is "why patch stay in available upgrades? Can I remove it? »

  This patch will be deleted once you upgrade to version 9.0.x and now cannot be "off put into service.

  Kind regards

  Zack

• IronPort M670 no operating system installed

  Hello! I got a RMA M670 Ironport, but it has nothing installed. He has just started.

  I want to know where an iso file so I can manually install Ironport.

  Thank you!

  If the unit of RMA has installed and you do not get the AsyncOS standard start, you will need to follow up with the case which was opened for the RAM, or you must open a new support case:

  https://Tools.Cisco.com/ServiceRequestTool/SCM/Mgmt/case

  You can follow the quick start guide:

  Cisco IronPort M670 quick start guide

  At startup - you should just after the bend standard process.  Once the device is online, assign a temporary IP address and migrate the old configuration according to the needs, as appropriate.

  I hope this helps!

  -Robert

  (* If you have received the answer to your original question and found it useful/correct - mark it as answered if it pleases you and don't forget to leave a note to reflect!)

• Cisco MeetingPlace License Document upgrade

  Does anyone have documentation to modernize a MeetingPlace Audio and Web server port County license?

  Hi Michael,

  I don't know if that's what you're looking for? Good reading;

  On the load of Cisco Unified MeetingPlace License Keys

  You can add or upgrade license keys for Cisco Unified MeetingPlace functionality in your system, individually or all at the same time. You add or update the license through MeetingTime keys.

  For the license keys that you can add or upgrade files are available when you buy a new system, Cisco Unified MeetingPlace or upgrading to version 5.3. These files are loaded into your Cisco Unified MeetingPlace 8106 or 8112 when it was purchased.

  If you buy new license keys, Cisco sent to you as an attachment. Save the attachment on your local computer's drive. Place where you can navigate to it easily in MeetingTime.

  Loading of all license keys

  --------------------------------------------------------------------------------

  Step 1 tablet in the MeetingTime system, select the action of the system of Import Options.

  Step 2 for an Action attribute, click the values box. Choose Import to the system system options, and then click OK.

  Step 3 attribute to the name of the import file, click the values box.

  Step 4 to enter the file name of the license key file, accept the default file name or enter a different file name, and then click OK. (Use the control key, if necessary.)

  Step 5 click Run.

  Licenses are exported to the Cisco Unified MeetingPlace 8106 or server 8112 then added or updated day.

  Step6 restart the Cisco Unified MeetingPlace 8106 or server 8112.

  Step 7 to verify that the licenses have been loaded, run an MeetingTime license information report. (See section "License Information report" on page 4-6)

  Compare the amounts of license and license keys with the information that you entered in MeetingTime. If you see inconsistencies, load again missing licenses. For help, see "Technical support getting" in the Cisco Documentation by teleconference and support Guide.

  --------------------------------------------------------------------------------

  Loading license keys individually

  --------------------------------------------------------------------------------

  Step 1 locate the key option on the license document.

  Step 2 in the MeetingTime configure tab, select the System Options display.

  Step 3 click query, then click on the < or=""> button to locate the license key, you want to add or upgrade.

  Step 4 attribute to the number of licenses, click the values box. Enter the number of licenses for your system, and then click OK.

  The number of licenses must match the number that corresponds to your Cisco Unified MeetingPlace option key.

  Step 5 attribute for the button Option, enter the number of the option key.

  Step 6 click on save changes.

  Step 7 to load additional licenses, repeat steps 3 to 6.

  Step 8 reboot the Cisco Unified MeetingPlace 8106 or server 8112.

  Step 9 to verify that the licenses have been loaded, run an MeetingTime license information report. (See section "License Information report" on page 4-6)

  Compare the amounts of license and license keys with the information that you entered in MeetingTime. If you see inconsistencies, load again missing licenses. For help, see "Technical support getting" in the Cisco Documentation by teleconference and support Guide.

  This doc.

  http://www.Cisco.com/en/us/products/SW/ps5664/ps5669/products_administration_guide_chapter09186a0080333e0f.html#wp95293

  I hope this helps!

  Rob

  Remember messages useful rate...

• Cisco TelePresence PrecisionHDMC USB camera

  Nice day!

  I have some problems with the usb camera: it is not a picture of the camera in Skype/vlc, violet only background. If I close glas lens, I see the banner with logo cisco and non-functional video icon. MIC is ok. Used OS Win7, Win 8.1, software for camera CC1.5.0/CC1.4.1 is installed, but only for Win7.

  Can you tell any solution or more tests for this device?

  Best regards

  Arseniy Kuznetsov

  Engineer, Delight 2000.

  The problem with other video programs, or only with S4B?

  Have you tried a different USB port, or even on another computer all together?

  I try and reload the firmware, note that you may need to define setup of the firmware to run in Compatibility Mode with Windows XP to make it work on recent Windows PCs.

• Disconnect the Vcenter/Cluster host and addition of new implications of Vcenter.

  All,

  We had to rebuild our vcenter on a separate box, because the database on the old one is completely messed up.  Successfully, we have disconnected hosts stand alone and added to the new Vcenter inventory without problem.  We wanted to know if there are problems with HA/DRS power off and disconnect a host of vcenter which is currently in a cluster.  Then add it to the new vcenter to manage.

  Thank you!

  No problem.

  Simple disable HA, tie your host for the new Victoria Cross, and then reactivate the cluster functions.

  André