Cisco SKU or IDP description

Similar Questions

• Cisco SFP module name

  What is the difference between the module two next?

  SFP-GE-L = vs SFP - GE - L, we have = to sigh at the end and others are not.

  http://www.Cisco.com/c/en/us/products/collateral/interfaces-modules/Tran...

  SFP-GE-L	1000BASE-LX/LH SFP (DOM)	GLC-LH-SMD	1000Base-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM	-
  SFP-GE-L =	1000BASE-LX/LH SFP (DOM)	GLC-LH-SMD =	1000Base-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM	-
  SFP-GE-S	SFP 1000BASE-SX (DOM)	GLC-SX-MMD	1000BASE-SX SFP transceiver module, MMF, 850nm, DOM	-
  SFP-GE-S =	SFP 1000BASE-SX (DOM)	GLC-SX-MMD =	1000BASE-SX SFP transceiver module, MMF, 850nm, DOM	-

  For all Cisco SKU (Stock keeping units), the '=' at the end means a piece of spare or ordered separately article.

  Without a '=' means usually the exact same item is ordered in a parent configuration - for example, a SFP as an optional part of a module switching.

  They are exactly the same physical part.

• Cisco IPS

  Hi all

  Take over some jobs maitainence on IPS and it then, I need help!

  ASA5510-AIP10-K9 with license expires a year. Motor still works well but no update of the signature.

  Question 1

  What is the SKU for license renewal? can you please paste the URL linked here?

  Question 2

  The IPS engine is version 6,0000 E4. Intend to upradge to 8,0000 E4 version.

  What is the propper upgrade path? Should I start by 7.0000 E4, then followed by 8,0000 E4

  or 7.0 (8) E4 patches are cumulative, so only need to apply the latest version?

  Question 3

  This is the little piece of capture "display version":

  Using 1032495104 bytes of available memory (65% of use) 675745792

  system is using 17.4 M 38.5 m bytes of disk space available (45% of use)

  application data using 48.4 M off 166,6 M bytes of disk space available (31% of use)

  startup is using 45.6 M 68.5 m bytes of disk space available (70% of use)

  Application log using 123.5 M off 513,0 M bytes of disk space available (24% of use)

  The upgrade of the motor system will cause the IPS running out of space? I focus on the second statement.

  Millions of thanks to all

  Noel

  1 as described in this document, you must have the support of IPS for your ASA - this is a service contract that includes the ASA equipment and software SMARTnet until updates of signature and software IPS. more commonly classified in support is "AR NBD" (Advance replacement the next day) and Cisco SKU CON-SU1-AS1A10K9.

  2. I think 7.0000 that e4 is the current version. You can upgrade to that (or 7.0 (8) E4) directly from your current version. Please see the readme file.

  3. your available space should be fine.

• Cannot add a device Cisco IOS - development issue?

  I try to add a router IOS (as a platform) my Hyperic (3.2.1) resources and I kept getting this error (see the following stack trace).
  
  =============================================================
  java.lang.NullPointerException at
  org.hyperic.hq.ui.action.resource.platform.inventory.NewPlatformAction.execute(NewPlatformAction.java:108) to
  org.hyperic.hq.ui.action.BaseRequestProcessor.processActionPerform(BaseRequestProcessor.java:63) to
  org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236) to
  org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196) to
  org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432) to
  javax.servlet.http.HttpServlet.service(HttpServlet.java:717) to
  javax.servlet.http.HttpServlet.service(HttpServlet.java:810) to
  org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252) to
  org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
  ....
  
  =============================================================
  
  So, I downloaded the src and it built with the following parameters of the construction.
  Windows Server 2003 SP2 (Standard edition)
  Java 1.5 update 15, Ant 1.7.0 JBoss 4.0.3SP1, PostgreSQL
  
  However, I still get the same error. After adding a few log statements, I realized that in NewPlatformAction.java ("run" method), the value of the agent is zero [agent is created by calling BizAppUtils.getAgentConnection (...)] which causes the NullPointerException in the above stack trace [boss.createPlatform (...,...,..., agent.getId ())].
  
  BizAppUtils.getAgentConnection () is essentially a block of code to check if the "IP Port string' is null or not and this string always seems to be the null value. I put some instructions to log in NewPlatformAction.java and BizAppUtils.java and have cut-and - paste a few lines of the log server below.
  
  Basically, BizAppUtils jump the complete code block that is supposed to create an Agent.
  
  ==============================================================
  
  2008-03-13 12:23:32, 537 [http - 0.0.0.0 - 7080-2] INFO [NewPlatformAction] find the type of platform [10004]
  2008-03-13 12:23:32, 537 [http - 0.0.0.0-7080-2] INFO [NewPlatformAction] platform [Cisco 1720] was created with attributes add ImageButtonBean = [null, null] cancel = ImageButtonBean [null, null] create = ImageButtonBean [null, null] Delete = ImageButtonBean [null, null] ok = ImageButtonBean [38: 10] Delete = ImageButtonBean [null, null] reset = enable ImageButtonBean [null, null] = ImageButtonBean [null, null] userset = ImageButtonBean [null, null] pageSize = null startMonth = 2 startDay = 2 startYear = 1 startHour = 12 startMin = 23 startAmPm = pm endMonth = 0 endDay = 1 endYear = 2008 endHour = 12 endMin = 23 endAmPm = null startTime = now recurInterval = recurrenceFrequencyDaily = numDays daily = 1 NumSemaines = 1 recurrenceDay=[Ljava.lang.Integer;@121e1bb recurrenceFrequencyMonthly = onEach numMonths = 1 recurrenceWeek = null monthlyRecurrenceDay = null eachDay 1 endTime = none = RID = null type = null name = Cisco 1720 location = lab description = router Cisco 1720 cpuCount = null fqdn = cisco1720.inside.eclyptic.com FPS = [{address = 10.100.1.13 netmask = mACAddress = id = 0 mTime = null cTime = null}] numIps = 1
  2008-03-13 12:23:32, 553 forms of INFO [NewPlatformAction] [http - 0.0.0.0 - 7080-2] string value for the ip port is: null...
  2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [BizappUtils] Agent ip port string: null...
  2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [BizappUtils], returning null
  2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [NewPlatformAction] after the creation of agent
  2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [NewPlatformAction] check for agent == null is true
  
  ==============================================================
  
  I have attached a screenshot ' create new platform "UI of Hyperic and my modified source files.
  
  I would really like to know if I'm doing something wrong or is this a valid bug in Hyperic?
  
  I just want to add this IOS device to Hyperic to familiarize myself with how Hyperic manages network devices. My long-term goal is to add network devices in Hyperic via an API - so pointers (or the samples/docs) to an API which allows to add devices to Hyperic is also really useful.

  Hi Michelle,

  I was able to reproduce using a fresh installation with no agent installed.  At least one officer has, on the same machine that the HQ server is fine.  We should apply rather than just displaying this message:
  "There is no agent available to treat this platform."

  Can you install + import agent and try again?

• Port of WLC 5508 and 4510 - channels

  LACP and PAgP are not based on the controller and it seems that the 4500 series will use no LAG.

  Interface Port-channel10
  Description Port-Channel WLC
  switchport
  switchport mode trunk
  service-policy input AutoQos - 4.0 - entry-policy
  service-policy output OUTPUT-PRIORITY-POLICE-ETHERCHANNEL

  interface GigabitEthernet3/1

  Cisco 5508 wireless controller description
  switchport mode trunk
  active in mode channel-group 10
  point to point spanning tree-type of link
  !
  interface GigabitEthernet3/2
  Cisco 5508 wireless controller description
  switchport mode trunk
  active in mode channel-group 10
  point to point spanning tree-type of link

  I get the error message "lacp not enabled on the remote port..". I removed the 2nd fiber cable and removed the channel group so I can get the WLC online. Any help would be greatly appreciated.

  In order to get the channel of ether to work with the WLC, you must change your configuration of:

  !

  interface GigabitEthernet3/1
  active in mode channel-group 10
  !
  interface GigabitEthernet3/2
  active in mode channel-group 10
  !

  Mode it

  !

  interface GigabitEthernet3/1
  channel-group 10 mode on
  !
  interface GigabitEthernet3/2
  channel-group 10 mode on
  !

  Mode IT is said the switch to Link Aggregation Protocol try and negotiate by using one of two LACP or PAgP control protocols.

  using ONE fits in the configuration guide when you enable the option Cisco WLC LAG.

• How to configure ACS 5.2 to manage the Junos 10.4R6.5 fwl via GANYMEDE.

  Hi all

  I have a camera ACS 5.2 newly installed, integrated with our announcement and his work with cisco product, routers switches and etc.  Now I would like to include Juniper firewalls so to be authenticated via ACS 5.2 either via ssh and web access.  Can someone share me how to initiate this, creating policies.

  FYI: I have 14:00 groups regionaladm and regionalops, read/write and read-access, respectively.

  Kind regards

  Marlon

  Marlon,

  I stuck in a config below file I made for our ScreenOS Firewall work with Cisco ACS v5.2.  This configuration may not work because yours is Junos, but it could bring closer you reach to understand.  Also, if you have not been on the Juniper J-Net ask autour, give it a shot. (forums.juniper.net)

  Good luck!

  -Chris

  Title: Example configuration - GSU of Juniper and Cisco ACS v5.x

  Product: SSG320M juniper (Cisco ACS v5.x)
  

  Version: 6.3.0r10.0 ScreenOS (Cisco ACS v5.2.0.26.8)

  Network topology:

  [Juniper SSG320M]-[Cisco 3560 Switch]-[Cisco ACS VM]
  

  Description:

  Goal - authenticate GSU administrators using GANYMEDE + instead of local connections

  Description - This configuration for Cisco ACS v5.x, JTACS had only configuration v3.3.

  ACS v5.x is a VM based on Linux with a completely new user interface and structure.

  Configuration:

  Configure the Juniper (CLI)

  1. Add configuration Cisco ACS and GANYMEDE +.

  Set id CiscoACSv5 of auth-server 1
  set the auth-CiscoACSv5 server ServerName 192.168.1.100
  set server CiscoACSv5-type of admin account
  set the server CiscoACSv5 auth type Ganymede
  Define auth-server CiscoACSv5 Ganymede secret CiscoACSv5
  define CiscoACSv5 Ganymede 49 auth-server port
  Set the server auth admin CiscoACSv5
  Set admin auth distance primary
  Remote admin auth root set
  define outer-get administrator privileges

  Configure the Cisco ACS (GUI) v5.x
  1. navigate to elements of strategy > authorization and permissions > peripheral Administration > Shell profiles
  Create the profile of Shell of Juniper.
  Click the button [create] at the bottom of the page
  Select the general tab
  Name: Juniper
  Description: Custom for Juniper SSG320M attributes
  Select the custom attributes

  Add the vsys attribute:
  Attribute: vsys
  Requirement: required
  Value: root
  Click on the [Add ^] button above the field for the attribute

  Add the attribute of privilege :

  Attribute: privilege
  Requirement: required
  Value: root

  Note : you can also use "read-write", but then the local admin does not work correctly
  Click on the [Add ^] button above the field for the attribute
  Click the button [send] at the bottom of the page

  2. navigate to access policies > Access Services > default device Admin > authorization
  Create the authorization policy of Juniper and filter by IP address.
  Click [customize] at the bottom right of the page
  In terms of customize, select IP address in the left window
  Click the [>] button to add
  Click the [OK] button to close the window

  Click the button [create] at the bottom of the page to create a new rule
  In general, the name of the new rule Juniper and make sure that this option is enabled
  In Conditions, check the box next to IP address
  Enter the ip address of the Juniper (192.168.1.100)
  Under results, click the [Select] button next to the Shell profile field
  Select "Juniper" and click the [OK] button
  Under results, click the [Select] button under the command field sets (if used)
  Select "allow all the" and make sure all other boxes are not CHECKED
  Click the [OK] button to close the window
  Click the [OK] button at the bottom of the page to close the window
  Check the box next to the policy of Juniper , and then move the policy to the top of the list
  Click on the [Save] button at the bottom of the page

  Audit:

  Connect to the CLI of Juniper and GUI using an ACS internal user account and try to change something to check the level of privilege.

• Receive message "Validation of C:\WINDOWS\System32\VSINIT.dll failure" error message when trying to run Cisco VPN Client.

  windows\system32\vsinit.dll

  I try to run CISCO "VPN Client" connect from my PC at home for my work PC.

  Then, I get a message:

  Validation failed for C:\WINDOWS\System32\VSINIT.dll

  Any ideas?

  Martin

  Hello

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  If the steps above is not enough of it please post your request in the TechNet forum for assistance: http://social.technet.microsoft.com/Forums/en/category/windowsxpitpro

• SRW2048 and a Cisco 1841

  I am trying to Setup VLAN between a 2 and a Cisco 1841 router SRW2048 switches. I have ports that connect the 2 switches to the other and the port that connect to router as junction ports. I set 2 VLANS. VLAN 1 is just the vlan by default everyone runs and vlan will be the area demilitarized. I have no configuration of access control lists to block traffic, but when I assign vlan 2 on the port that the server is, I can not ping to the gateway. I don't know what is happening, see below for the cleaned configs.

  1841:

  Current configuration: 4282 bytes
  !
  version 12.4
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime localtime show-time zone
  encryption password service
  !
  hostname QCSLOLURTR01
  !
  boot-start-marker
  start the system flash c1841-advsecurityk9 - mz.124 - 25B .bin
  boot-end-marker
  !
  logging buffered debugging 8192
  !
  AAA new-model
  !
  !
  AAA authentication login default group Ganymede + local
  the AAA authentication enable default group Ganymede + none
  !
  AAA - the id of the joint session
  clock timezone CST - 6
  clock to summer time recurring CDT
  IP cef
  !
  !
  property intellectual auth-proxy max-nodata-& 3
  property intellectual admission max-nodata-& 3
  !
  !
  no ip domain search
  IP domain name qcsupply.com
  !
  !
  !
  user name x

  Archives
  The config log
  hidekeys
  !
  !
  x IP ftp username
  x IP ftp password

  !
  !
  crypto ISAKMP policy 1
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  ISAKMP crypto key QCSLOLU address x.x.x.x No.-xauth
  !
  !
  Crypto ipsec transform-set esp-3des esp-md5-hmac ts1
  Crypto ipsec transform-set esp - esp-md5-hmac ts2
  !
  VPN-map 10 ipsec-isakmp crypto map
  defined peer x.x.x.x
  Set transform-set ts1
  match address 101
  !
  !
  !
  interface FastEthernet0/0
  Description QCSL OLU INTERNET CONNECTION
  IP x.x.x.x where x.x.x.x
  IP access-group denied-hack-attack in
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  NAT outside IP
  IP virtual-reassembly
  automatic duplex
  automatic speed
  No cdp enable
  card crypto vpn-map
  !
  interface FastEthernet0/1
  no ip address
  automatic duplex
  automatic speed
  !
  interface FastEthernet0/1.1
  encapsulation dot1Q 1 native
  IP 10.60.90.1 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  !
  interface FastEthernet0/1.2
  encapsulation dot1Q 2
  IP 10.60.89.1 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  !
  interface Serial0/0/0
  no ip address
  Shutdown
  !
  Router eigrp 100
  Network 10.60.89.0 0.0.0.255
  Network 10.60.90.0 0.0.0.255
  No Auto-resume
  !
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 x.x.x.x
  !
  no ip address of the http server
  23 class IP http access
  local IP http authentication
  no ip http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  IP nat inside source map of route-nat interface FastEthernet0/0 overload
  IP nat inside source static tcp 10.60.89.10 80 80 extensible x.x.x.x
  IP nat inside source static tcp 10.60.89.10 expandable 443 443 x.x.x.x
  IP nat inside source static tcp 10.60.89.10 2021 x.x.x.x extensible 2021
  IP nat inside source static tcp 10.60.89.10 6100 6100 extensible x.x.x.x
  IP nat inside source static tcp 10.60.90.13 80 80 extensible x.x.x.x
  IP nat inside source static tcp 10.60.90.13 expandable 443 443 x.x.x.x
  IP nat inside source static tcp 10.60.90.13 1494 x.x.x.x extensible 1494
  !
  deny-hack-attack extended IP access list
  allow udp 0.255.255.255 x.x.x.x any eq snmp
  deny udp any any eq snmp
  deny udp any any eq tftp
  deny udp any any eq bootpc
  deny udp any any eq bootps
  deny ip x.x.x.x 0.15.255.255 all
  deny ip x.x.x.x 0.0.255.255 everything
  allow an ip
  !
  record 10.10.5.30
  access-list 23 allow 10.10.10.0 0.0.0.7
  access-list 99 allow 10.0.0.0 0.255.255.255
  access-list 99 allow x.x.x.x 0.0.1.255
  access-list 101 permit ip 10.60.90.0 0.0.0.255 10.10.0.0 0.0.255.255
  access-list 101 permit ip 10.60.89.0 0.0.0.255 10.10.0.0 0.0.255.255
  access-list 105 deny ip any host x.x.x.x
  105 ip access list allow a whole
  access-list 111 deny ip 10.60.90.0 0.0.0.255 10.10.0.0 0.0.255.255
  access-list 111 deny ip 10.60.89.0 0.0.0.255 10.10.0.0 0.0.255.255
  access-list 111 allow ip 10.60.89.0 0.0.0.255 any
  access-list 111 allow ip 10.60.90.0 0.0.0.255 any
  SNMP-server community no RO
  map of route-nat allowed 10
  corresponds to the IP 111
  !
  !
  RADIUS-server host x.x.x.x
  RADIUS-server key x
  !
  control plan
  !
  Banner motd ^ C

  x

  ^ C
  !
  Line con 0
  line to 0
  Modem InOut
  Discovery to automatically configure modem
  autohangup
  Speed 2400
  line vty 0 4
  location * Access Virtual Terminal allowed only from internal network *.
  access-class 99 in
  privilege level 15
  transport telnet entry
  line vty 5 15
  access-class 23 in
  privilege level 15
  transport telnet entry
  !
  Scheduler allocate 20000 1000
  end

  SRW2048 #1:

  Port 1: Trunk (to the router)

  Port 2: Trunk (SRW2048 #2)

  Prot 24: VLAN 2

  SRW2048 #2:

  Port 1: Trunk (of SRW2048 #1)

  Any ideas?

  Because the SRW is now part of Cisco Small Business, it would probably be best to ask the Cisco Small Business support community. You find people from Cisco over there.

  For SRW configuration, you added the two VLANS to your trunk ports? Configuration of a port in trunk mode adds automatically that all configured VLAN to the trunk.

  The server has a static IP address in the DMZ LAN?

• PC8132F to Cisco Catalyst 3600

  Nice day

  I hope someone can help me here, I'll have questions, get a channel on port with 802. 1 q, working between a stack of 2 devices of the switches 8132F and a single Cisco Catalyst 3600, this switch series switch cannot be removed due to regulations graduates by a Government Department that works to and I need to put an effective link between the switch and our new 8132F switches (this was easy until the network was fully Cisco) but for the life of me I can't not operate. When I connect the ports (well I connect only 1 because I'm testing only at this stage, in the end, it will be two)

  Here's the configs for two switches

  Cisco:

  Interface Port-Channel 4

  Description box EtherChannel to Dell Core

  switchport trunk encapsulation dot1q

  switchport trunk allowed vlan 1-4

  switchport mode trunk

  broadcast storm control 60.00

  interface GigabitEthernet1/3

  Description box to Dell Core EtherChannel * PORT 01 *.

  switchport trunk encapsulation dot1q

  switchport trunk allowed vlan 1-4

  switchport mode trunk

  broadcast storm control 60.00

  spanning tree portfast trunk

  spanning tree guard root

  channel-group mode 4 on

  !

  interface GigabitEthernet1/4

  Description box to Dell Core EtherChannel * 02 PORT *.

  switchport trunk encapsulation dot1q

  switchport trunk allowed vlan 1-4

  switchport mode trunk

  broadcast storm control 60.00

  spanning tree portfast trunk

  spanning tree guard root

  channel-group mode 4 on

  !

  Dell:

  interface port-channel 24
  Description "2 Port EtherChannel link Cisco 3600"
  switchport mode trunk
  switchport trunk allowed vlan 1-4
  dvlan-tunnel mode
  port-channel min-links 1
  output
  !
  interface Te1/0/24
  Description "2 Port EtherChannel link Cisco 3600"
  active in mode channel-group 24
  Storm-control broadcasts 60
  switchport mode trunk
  switchport trunk allowed vlan 1-4
  dvlan-tunnel mode
  output
  !
  interface Te2/0/24
  Description "2 Port EtherChannel link Cisco 3600"
  active in mode channel-group 24
  Storm-control broadcasts 60
  switchport mode trunk
  switchport trunk allowed vlan 1-4
  dvlan-tunnel mode
  output

  Any help would be appreciated more

  Concerning

  Justin

  jpsimmonds, I sent an email and look forward to your response.

• Reference Dell m6220 aggregated at Cisco 6506

  I transition my old 1955 Dell blade chassis to my 'new' Dell m1000e blade chassis to the House and I encountered a problem. I'm posting in the network as it is more closely related to one than the other available categories.

  Setup: Dell m1000e with six stand-alone m6220 passes (not stacked) connecting to a Cisco 6506. Each m6220 spans four Gb blades in the 6506... M6220-a1, port 17, plugs into 6506, port g1/1; M6220-a1, port 18, plugs into 6506, port g2/1; M6220-a1, port 19, plugs into 6506, g3/1 port; M6220-a1, port 20, plugs into 6506, port g4/1. M6220-a2, port 17, plugs into 6506, port g1/48; M6220-a2, 18 port, connects to 6506, port g2/48; M6220-a2, port 19, plugs into 6506, g3/48 port; M6220-a2, port 20, plugs into 6506, g4/48 port; the process repeats supposed for the rest of m6220.

  OFFSET groups: po1 (12, 17-20) to po1 (g1/1-g4/1); PO6 (a2, 17-20) to po6 (g1/2-g4/2)

  All is well. the Television ether on the Cisco displays LACP is in place and working well, like the fact the same command on the side of Dell.

  I did all the LAGS interfaces trunks and originally supposed to Dell was like Cisco while none allowed VLAN defined means all the VLANS allowed. I've since read that Dell default behavior is to only authorized WHAT VLAN specified. I've added the appropriate VLAN on the side of Dell.

  Pings between m6220 very well work. Pings to the rest of the network the m6220 very well working. Pings between the 6506 and the blades are not.

  The blades run ESXi 5.5U2 and I added two interfaces tissue management vSwitch. I first tried to make the m6220 g1/1 an access port, but that did not work. I tried making a port trunk and setting one VLAN, but this does not work either.

  What information is needed to help with this?

  Thank you.

  I'm done just erase everything and start over. Sometimes when you have changed all sorts of things, create a clean starting point, it is what is needed.

  Daniel, thanks for the reply and suggestions.

  Here's the configs that worked as I expect. I hope someone can benefit from my efforts.

  Cisco 6506:
  interface Port-channel1
description m1000e-ModuleA1
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface Port-channel2
description m1000e-ModuleB1
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface Port-channel3
description m1000e-ModuleC1
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface Port-channel4
description m1000e-ModuleC2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface Port-channel5
description m1000e-ModuleB2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface Port-channel6
description m1000e-ModuleA2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface GigabitEthernet1/1
description m1000e-ModuleA1-Port17
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode active
!
interface GigabitEthernet1/2
description m1000e-ModuleB1-Port17
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 2 mode active
!
interface GigabitEthernet1/3
description m1000e-ModuleC1-Port17
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 3 mode active
!
interface GigabitEthernet1/46
description m1000e-ModuleC2-Port17
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 4 mode active
!
interface GigabitEthernet1/47
description m1000e-ModuleB2-Port17
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 5 mode active
!
interface GigabitEthernet1/48
description m1000e-ModuleA2-Port17
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 6 mode active
!
interface GigabitEthernet2/1
description m1000e-ModuleA1-Port18
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode active
!
interface GigabitEthernet2/2
description m1000e-ModuleB1-Port18
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 2 mode active
!
interface GigabitEthernet2/3
description m1000e-ModuleC1-Port18
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 3 mode active
!
interface GigabitEthernet2/46
description m1000e-ModuleC2-Port18
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 4 mode active
!
interface GigabitEthernet2/47
description m1000e-ModuleB2-Port18
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 5 mode active
!
interface GigabitEthernet2/48
description m1000e-ModuleA2-Port18
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 6 mode active
!
interface GigabitEthernet3/1
description m1000e-ModuleA1-Port19
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode active
!
interface GigabitEthernet3/2
description m1000e-ModuleB1-Port19
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 2 mode active
!
interface GigabitEthernet3/3
description m1000e-ModuleC1-Port19
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 3 mode active
!
interface GigabitEthernet3/46
description m1000e-ModuleC2-Port19
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 4 mode active
!
interface GigabitEthernet3/47
description m1000e-ModuleB2-Port19
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 5 mode active
!
interface GigabitEthernet3/48
description m1000e-ModuleA2-Port19
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 6 mode active
!
interface GigabitEthernet4/1
description m1000e-ModuleA1-Port20
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode active
!
interface GigabitEthernet4/2
description m1000e-ModuleB1-Port20
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 2 mode active
!
interface GigabitEthernet4/3
description m1000e-ModuleC1-Port20
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 3 mode active
!
interface GigabitEthernet4/46
description m1000e-ModuleC2-Port20
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 4 mode active
!
interface GigabitEthernet4/47
description m1000e-ModuleB2-Port20
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 5 mode active
!
interface GigabitEthernet4/48
description m1000e-ModuleA2-Port20
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 6 mode active
!
interface Vlan100
description Primary VLAN
ip address 192.168.100.4 255.255.255.0

  -------------------------------------------------------------------------------

  Dell m6220-a1

  interface vlan 100 1
  ip address 192.168.100.41 255.255.255.0
  !
  interface Gi1/0/1
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/2
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/3
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/4
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/5
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/6
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/7
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/8
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/9
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/10
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/11
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/12
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/13
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/14
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/15
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/16
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged
  exit
  !
  interface Gi1/0/17
  channel-group 1 mode active
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  exit
  !
  interface Gi1/0/18
  channel-group 1 mode active
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  exit
  !
  interface Gi1/0/19
  channel-group 1 mode active
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  exit
  !
  interface Gi1/0/20
  channel-group 1 mode active
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  exit
  !
  interface port-channel 1
  description "Cisco 6506 Po1"
  switchport mode general
  switchport general acceptable-frame-type tagged-only
  switchport general allowed vlan add 100 tagged

  The remaining Dell m6220's are the same with the port-channel changed.


• PowerConnect switch and Cisco routers

  I have 4 Cisco routers connected to our Dell Powerconnect 7024. This is a laboratory environment where I'm having every act of router (2 per site) as a WAN gateway for these 2 sites.

  Site 1                                                                                                                           Site 2

  2 3 router

  PC - Dumb_switch PowerConnect Dumb_switch client - PC Client

  Router 1 router 4

  There are a few other Vlans on the switch with connected devices. With the current configuration, these two sites can communicate with any other "site" connected to the switch on each route, with the exception of the other.

  Directly connected to the router interfaces are in trunk mode, as it's the only way I could get the dell to connect with the Cisco. Ive read in other threads that the general mode is usually suggested on the powerconnect switch, but had no luck with this configuration.

  Router 1---> item in gi1/0/15 (vlan 10)

  Router 2---> item in gi1/0/14 (vlan 11)

  Router 3---> item in gi1/0/22 (vlan 16)

  Router 4---> article gi1/0/23 (vlan 14)

  Example: a ping from Site 1 can reach int 22 of the switch without problem, but I can't ping jump according to R3. As all the other devices on this switch can talk to these sites, I'm not clear if the problem is my config switch dell or routers. Any input would be greatly appreciated. Thank you!

  ! Current configuration:
  ! Description of the system "PowerConnect 7024, 5.1.2.3, VxWorks 6.6"
  ! 5.1.2.3 system software version
  ! 'Normal' system operation mode
  !
  Configure
  GVRP enable
  VLAN 2-7, 9-14, 16
  output
  VLAN 2
  name 'BOSTON '.
  output
  VLAN 3
  name "MIAMI".
  output
  VLAN 4
  name of 'THE
  output
  VLAN 5
  name "SEATTLE".
  output
  VLAN 6
  name "DALLAS".
  output
  VLAN 7
  name "London".
  output
  VLAN 9
  name "Frankfurt".
  output
  VLAN 10
  name "Rome".
  output
  VLAN 11
  name "Sczecin.
  output
  VLAN 12
  name "Budapest".
  output
  VLAN 13
  name "Moscow".
  output
  VLAN 14
  name "Quebec".
  output
  -Other - or ITU (q)
  VLAN 16
  name "Winnipeg".
  output
  hostname "Devlin".
  location 1/0 2. PowerConnect 7024
  clock timezone-5 minutes 0
  battery
  1 2 Member! PCT7024
  output
  out-of-band interface
  Shutdown
  output
  no ip domain-lookup
  "local" IP domain name
  IP routing
  IP route 0.0.0.0 0.0.0.0 172.16.37.3
  IP route 172.16.37.160 255.255.255.240 172.16.37.162
  IP route 172.16.37.112 255.255.255.240 172.16.37.162
  IP route 172.16.37.112 255.255.255.240 172.16.37.147
  IP route 172.16.37.144 255.255.255.240 172.16.37.147
  IP route 172.16.37.240 255.255.255.240 172.16.37.244
  IP route 172.16.37.224 255.255.255.240 172.16.37.244
  IP route 172.16.37.224 255.255.255.240 172.16.37.217
  -Other - or ITU (q)
  IP route 172.16.37.208 255.255.255.240 172.16.37.217
  ARP 172.16.37.162 0022.9057.7F51
  interface vlan 1
  IP 172.16.37.4 255.255.255.240
  bandwidth 10000
  IP ospf cost 10
  output
  interface vlan 2
  IP 172.16.37.17 255.255.255.240
  output
  interface vlan 3
  IP 172.16.37.33 255.255.255.240
  output
  interface vlan 4
  IP 172.16.37.49 255.255.255.240
  output
  interface vlan 5
  IP 172.16.37.65 255.255.255.240
  output
  interface vlan 6
  IP 172.16.37.81 255.255.255.240
  output
  interface vlan 7
  -Other - or ITU (q)
  IP 172.16.37.97 255.255.255.240
  output
  interface vlan 9
  IP 172.16.37.129 255.255.255.240
  bandwidth 10000
  output
  interface vlan 10
  IP 172.16.37.145 255.255.255.240
  bandwidth 1000
  IRDP IP
  output
  interface vlan 11
  IP 172.16.37.161 255.255.255.240
  bandwidth 1000
  IRDP IP
  output
  interface vlan 12
  IP 172.16.37.177 255.255.255.240
  bandwidth 100000
  output
  interface vlan 13
  IP 172.16.37.193 255.255.255.240
  bandwidth 1000
  output
  interface vlan 14
  IP 172.16.37.209 255.255.255.240
  bandwidth 1000
  output
  interface vlan 16
  IP 172.16.37.241 255.255.255.240
  bandwidth 1000
  IP ospf cost 100
  output
  No flowcontrol
  !
  interface item in gi1/0/3
  spanning tree portfast
  output
  !
  interface item in gi1/0/4
  spanning tree portfast
  output
  !
  interface item in gi1/0/5
  spanning tree portfast
  switchport access vlan 2
  output
  !
  interface item in gi1/0/6
  spanning tree portfast
  switchport access vlan 3
  output
  !
  interface item in gi1/0/7
  spanning tree portfast
  switchport access vlan 4
  output
  !
  interface item in gi1/0/8
  spanning tree portfast
  switchport access vlan 5
  output
  !
  interface item in gi1/0/9
  switchport access vlan 6
  output
  !
  interface item in gi1/0/10
  switchport access vlan 7
  output
  !
  interface item in gi1/0/11
  spanning tree portfast
  switchport mode trunk
  output
  !
  interface item in gi1/0/12
  spanning tree portfast
  switchport mode trunk
  output
  !
  interface item in gi1/0/13
  switchport access vlan 9
  output
  !
  interface item in gi1/0/14
  Speed 100
  full duplex
  switchport mode trunk
  switchport general allowed vlan add 10 tag
  switchport access vlan 10
  output
  !
  interface item in gi1/0/15
  Speed 100
  full duplex
  switchport mode trunk
  switchport general allowed vlan add 11 tag
  switchport access vlan 11
  output
  !
  interface item in gi1/0/16
  switchport access vlan 12
  output
  !
  interface item in gi1/0/17
  switchport access vlan 12
  output
  !
  interface item in gi1/0/18
  switchport access vlan 13
  output
  !
  interface item in gi1/0/19
  switchport access vlan 13
  output
  !
  interface item in gi1/0/22
  Speed 100
  full duplex
  switchport mode trunk
  switchport general allowed vlan add 16 tag
  switchport access vlan 16
  output
  !
  interface item in gi1/0/23
  Speed 100
  full duplex
  switchport mode trunk
  VLAN allowed switchport General add 14
  switchport access vlan 14
  output
  !
  interface item in gi1/0/24

  You could probably create a static route in Router 1 router 4 with a priority which is better than the other options, so we're going unless the link is down.

• STD + Cisco 8024f

  Hello

  I am trying to install

  SwA (cisco WS-C3560G-24PS)

  SWB (cisco WS-C3560G-24PS)

  CFC (8024f)

  SWD (8042f)

  I stacked CFC & swd (such as CFCS).

  My links are so

  SWC 1/0/1 & 1/0/2 stacked related swc2/0/1 & 2/0/2. These are my stackable ports!

  SwA gi0/16-online swc1/0/24

  SWB gi0/16-online swc2/0/24

  SwA has 2 links for EFA

  bits of Cisco

  SwA

  spanning tree mode rapid pvst
  spanning tree etherchannel guard misconfig
  spanning tree extend id-system
  VLAN spanning tree priority 4096 1,19,201-211

  interface GigabitEthernet0/16
  Description link Trunk at CFC
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 201-208 250
  switchport mode trunk
  ! Shutdown

  Interface Port - Channel 1
  Description safe Inter-Switch
  switchport trunk encapsulation dot1q
  switchport mode trunk
  bandwidth 2000000
  !
  interface GigabitEthernet0/1
  Description safe Inter-Switch
  switchport trunk encapsulation dot1q
  switchport mode trunk
  channel-group mode 1 on

  interface GigabitEthernet0/24
  Description safe Inter-Switch
  switchport trunk encapsulation dot1q
  switchport mode trunk
  channel-group mode 1 on

  SWB

  spanning tree mode rapid pvst
  spanning tree etherchannel guard misconfig
  spanning tree extend id-system

  interface GigabitEthernet0/16
  Description link Trunk to swd
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 201-208 250
  switchport mode trunk
  ! Shutdown

  Interface Port - Channel 1
  Description safe Inter-Switch
  switchport trunk encapsulation dot1q
  switchport mode trunk
  bandwidth 2000000
  !
  interface GigabitEthernet0/1
  Description safe Inter-Switch
  switchport trunk encapsulation dot1q
  switchport mode trunk
  channel-group mode 1 on

  interface GigabitEthernet0/24
  Description safe Inter-Switch
  switchport trunk encapsulation dot1q
  switchport mode trunk
  channel-group mode 1 on

  on the 8024f

  Configure
  database of VLAN
  VLAN 201-208 250
  VLAN 1 1 routing
  output
  spanning tree mst mode

  spanning tree mst configuration
  instance 1 Add vlan 1
  output
  spanning tree mst configuration
  instance 201 add vlan 201
  output
  spanning tree mst configuration
  instance 202 Add vlan 202
  output
  spanning tree mst configuration
  instance 203 Add vlan 203
  output
  spanning tree mst configuration
  instance 204 add vlan 204
  output
  spanning tree mst configuration
  instance 205 add vlan 205
  output
  spanning tree mst configuration
  instance 206 Add vlan 206
  output

  spanning tree mst configuration
  instance 207 Add vlan 207
  output
  spanning tree mst configuration
  instance 208 Add vlan 208
  output
  spanning tree mst configuration
  instance of 250 Add vlan 250
  output
  spanning tree mst configuration
  name "SWC".
  output

  spanning tree mst configuration
  revision 1
  output

  interface Te1/0/24
  full duplex
  Description "CFC to swa.
  switchport mode trunk
  switchport trunk allowed vlan 201-208 250

  interface Te2/0/24
  full duplex
  Description "swb swd."
  switchport mode trunk
  switchport trunk allowed vlan 201-208 250
  output

  research on the 8024f I see this on the port. Note it has not received all BPDU packets!

  SWC

  show the spanning tree tengigabitethernet 1/0/24

  Te1/0/24 port permit Port Ext. cost: 20000
  State: Forwarding role: designated
  Identification of the port: 128.24 int. shipping cost: 20000
  Fast port: no Protection from root: No.
  Designated the bridge priority: 32768 address: D067. E5AF.1268
  Identification of the designated port: cost of access road designated 128,24: 0
  Root regional CSE: 80:00:D0:67:E5:AF:12:68 CST Port cost: 0
  Root Guard..................................... FAKE
  Loop Guard..................................... FAKE
  TCN Guard...................................... FAKE
  Portfast auto... TRUE
  Port of time since the last reset counters... 0 day 19 h 12 min 57 sec
  BPDU: 34588 sent, received 0

  See the spanning tree 2/0/24 tengigabitethernet

  Te2/0/24 port permit Port Ext. cost: 0
  Status: Disabled role: disabled
  Identification of the port: 128.48 int. Shipping costs: 0
  Fast port: no Protection from root: No.
  Designated the bridge priority: 32768 address: D067. E5AF.1268
  Identification of the designated port: 128.48 designated path cost: 0
  Root regional CSE: 80:00:D0:67:E5:AF:12:68 CST Port cost: 0
  Root Guard..................................... FAKE
  Loop Guard..................................... FAKE
  TCN Guard...................................... FAKE
  Portfast auto... TRUE
  Port of time since the last reset counters... 0 day 18 h 41 min 36 sec
  BPDU: 689 sent, received 0

  see the summary of spanning tree

  Spanning Tree Adminmode... Activated
  Spanning Tree Version... IEEE 802. 1 S
  BPDU guard mode... People with disabilities
  BPDU flood mode... People with disabilities

  Mode filter BPDU. People with disabilities
  Configuration name... CFC
  Review configuration level... 1
  Digest configuration key... 0x46511ebde89aab9201e08f03a0f29719
  Format of configuration selector... 0

  When I check there are 2 roots 1 on the valleys and 1 on the cisco... the cisco work

  SwA

  SH interface spanning tree g0/16

  Role of VLAN m Prio.Nbr cost Type
  ------------------- ---- --- --------- -------- --------------------------------
  VLAN0201 Desg FWD 4 128.16 P2p
  VLAN0202 Desg FWD 4 128.16 P2p
  VLAN0203 Desg FWD 4 128.16 P2p
  VLAN0204 Desg FWD 4 128.16 P2p
  VLAN0205 Desg FWD 4 128.16 P2p
  VLAN0207 Desg FWD 4 128.16 P2p
  VLAN0208 Desg FWD 4 128.16 P2p
  VLAN0250 Desg FWD 4 128.16 P2p

  SH detail g0/16 interface spanning tree

  Port 16 (GigabitEthernet0/16) VLAN0201 is designated transfer
  Port path costs 4, 128, Port identifier 128.16 Port priority.
  Designated root a priority 4297, address 001e.bde0.ea00
  Designated bridge has priority 4297, address 001e.bde0.ea00
  Designated port ID is 128.16, designated path cost 0
  Timers: 0 delay the message age 0, forward, hold 0
  Number of transitions to the transmission of State: 1
  Type of connection is from point to point by default
  BPDU: 34489 sent, received 4

  Show bridge spanning tree

  Hello Max Fwd
  VLAN ID time bridge age Dly Protocol
  ---------------- --------------------------------- -----  ---  ---  --------
  VLAN0001 4097 (4096, 1) 2 20 15 rstp 001e.bde0.ea00
  4115 VLAN0019 (4096, 19) 2 20 15 rstp 001e.bde0.ea00
  VLAN0201 4297 (4096, 201) 2 20 15 rstp 001e.bde0.ea00
  4298 VLAN0202 (4096, 202) 2 20 15 rstp 001e.bde0.ea00
  VLAN0203 4299 (4096, 203) 2 20 15 rstp 001e.bde0.ea00
  VLAN0204 4300 (4096, 204) 2 20 15 rstp 001e.bde0.ea00
  4301 VLAN0205 (4096, 205) 2 20 15 rstp 001e.bde0.ea00
  VLAN0207 4303 (4096, 207) 2 20 15 rstp 001e.bde0.ea00
  4304 VLAN0208 (4096, 208) 2 20 15 rstp 001e.bde0.ea00
  VLAN0209 4305 (4096, 209) 2 20 15 rstp 001e.bde0.ea00
  Rstp 001e.bde0.ea00 2 20 15 VLAN0250 33018 (32768, 250)

  I have no installation of STD on the cisco...  It's the first time I touch STD

  I guess if I get BPDUS be seen his will start working

  I had found a white paper before 8024f and stp, but as is typical I can't find it now!

  OK so finally managed to do work. everything moved to STD.

  There is a long and complicated why reason not to use STD wit pvst + (or anything else outside of STDs).

  He ha with convergence and how stp manages the VLAN and the lag!

  an I had install STD on the two end bang just worked

• Problem using Cisco WebEx on Win 7

  I try to use Cisco WebEx to use my home computer to get the files for the school. The meeting is set up at 100%, but whenever I try to access it from my Government computer, I get a saying that an add-on has failed. I tried, but I can't find the add-on responsible and if possible, where to download. The account I have is very, very safe and I'm unable to download a lot of things, so keep that in mind. Spent a lot of time trying to find a Web site that requires no download to use, and this seems to be the best. If there is more better, please let me know.

  < original="" title:="" webex="" from="" a="" government="" computer="">

  Hi Ken,

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that you are facing difficulties in the use of Cisco WebEx on your Windows 7 machine. I will certainly help you get this fixed number.

  I would be grateful if you could help me with more information:

  1. what web browser do you use?

  2. are you having the same problem when downloading the thing as Add-ons?

  If the problem only occurs when you use Cisco WebEx , then I suggest you send or post your query on forum Cisco WebEx. You can also check out the link below

  https://supportforums.Cisco.com/community/5726/conferencing

  Hope this information is useful. Please write back to us for assistance, we will be happy to help you.

• ACLog.dll missing killing Cisco Anyconnect Secure Mobiltiy customer

  I use 'Cisco AnyConnect Secure Mobility Client' on Windows 7 for a year now with no problems.
  All started yesterday when I try to connect I get this error message:

  dialog title: vpnui.exe - system error

  message: "the program can't start because aclog.dll is missing on your computer.  Try reinstalling the program to fix this problem. »

  So, of course, I tried to reinstall, but without success.

  I keep reading that aclog.dll is a windows system dll.
  No idea how to solve this problem?

  I installed Visual Studio SP1 of 2015, the other day and it looked like there were a few errors in the final dialog box.  Would he have the issue?

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Cisco RV042 cannot create a simple VPN?

  Hello

  I'm confused because I'm trying to set up a simple VPN (client of the bridge), but I can't!

  A SSL VPN or an IPSEC VPN, whatever...

  The RV042 firmware is up-to-date, and I try QuickVPN as a customer vpn (also updated...)

  My configuration details:

  I'm at the: 192.168.2.14/24

  My RV042: 192.168.2.250/24

  And the VPN intend to connect to: 192.168.4.x

  I am currently in testing... that's why I use private IP...

  Customer gateway

  Add a new VPN group Tunnel ofgroup VPN Group No. 1 Name of the tunnel: VPN TEST Interface: WAN1WAN2 Activate:

  Configuration of local groups Type of local security group: Range IPSubnetIP IP address: 192.168.4.0 Subnet mask: 255.255.255.0

  Remote Client installation Remote client: Domain Name (FQDN) Email address (USER FQDN) Client Microsoft VPN XP/2000 Domain name: Microsoft.com

  IPSec configuration

  Input mode:	IKE with preshared key
  Group of the phase 1 of DH:	Group 1-768 bitGroup bitGroup 2-1024 bit 5-1536
  Encryption of the phase 1:	DES3DESAES-128AES-192AES-256
  Authentication of the phase 1:	MD5SHA1
  Phase 1 time in HIS life:	28800 seconds
  Perfect Forward Secrecy:
  Group of the phase 2 DH:	Group 1-768 bitGroup bitGroup 2-1024 bit 5-1536
  Encryption of the phase 2:	DES3DESAES-128AES-192AES-256
  Authentication of the phase 2:	MD5SHA1
  Time for phase 2 of HIS life:	3600 seconds
  Pre-shared key:	123456

  so far, nothing fancy... Ok?

  So I create my username for the test:

  VPN Client Access User name: New password: Confirm the new password: Allow the change of password: YesNo. Active: DTSInfo-online Active

  The user is created and activated...

  For the test, I have disabled the firewall (router + windows 7).

  A dnow, when I lunch the QuickVPN client:

  

  Then, when I have lunch:

  > Connection...

  > Activation of policy...

  > Verification of network...

  > The remote gateway is not responding. You don't want to wait? [NO]

  > Disconecting from the server...

  This means that, after activation of the policy, I am connected on the router (user status: active). But when he check network... I am offline!

  There is the newspaper of the RV042:

  dec 18 12:57:50 2012	The VPN log	description of the additional connection (qknips1)
  dec 18 12:57:50 2012	The VPN log	listen to IKE messages
  dec 18 12:57:50 2012	The VPN log	forget the secrets
  dec 18 12:57:50 2012	The VPN log	loading of the secrets of ' / etc/ipsec.d/ipsec.secrets'
  18 12:57:57 dec 2012	The VPN log	(qknips1): removal of connection

  If I'm signed for 7 seconds... Why?

  Can someone help me?

  When I try with the built-in Windows VPN client, newspapers are filled just more... ^ ^

  Help! hour

  Thanks (and sorry for my bad English ^ ^)

  Hello

  Please use our forum

  Hi Skip my name is Johnnatan and I'm part of the community of support to small businesses. I ve seen your post and I see you are using Windows 7 and that you disable your firewall to test your connection. A configuration of the computer and the router must be in order to solve your problem.

  Computer

  As you use Windows 7, you must enable the Windows Firewall and create 2 rules, also make sure that Ipsec communication is allowed, you can follow these steps:

  http://www6.nohold.NET/CiscoSB/Loginr.aspx?login=1&PID=2&app=search&VW=1&articleid=2922

  Router:

  Go firewall > basic settings and

  Disable: Block WAN request

  Enable: Remote Management

  Go to VPN > VPN Passthrough and make sure everything is activate.

  I hope that you will find this answer useful, if it was satisfactory to you, please indicate the question as answer. Please note post you consider useful.

  Greetings,

  Johnnatan Rodriguez Miranda.

  Support of Cisco network engineer.