Cisco SFP module name

Similar Questions

• HP J4853A and Cisco SFP Module 100BASE-FX

  Hi all!

  HP J4853A and Cisco SFP Module modules 100BASE-FX is not compatible?

  Thank you!

  Both are 100Base FX for at layer 1, they are interoperable.

  Higher tier features will not be handled on one platform or another.

• Can I connect SFP GLC-LH-SMD connector lc single fiber on Cisco 897VA Module?

  Hi all

  Please can I connect SFP GLC-LH-SMD connector lc single fiber on Cisco 897VA Module?

  Thanks in advance.

  If you have only a single glass fiber then the GLC-LH-SMD = is NOT good

  because it is for double connection to a pair of fiber.

  You would like more information by your ISP, you will most likely need a GLC-BX-D (RX-TX/1310 nm, 1490 nm) or a GLC-BX-U(1310-nm TX/1490-nm RX)

  See below

  1000Base-BX10-D and 1000BASE-BX10-U SFP for bidirectional single fiber Applications

  SFP 1000BASE-BX-D and 1000BASE-BX-U, compatible with the IEEE 802.3Ah standard 1000BASE-BX10-D and 1000BASE-BX10-U, carried on in a single strand of SMF standard.

  A 1000BASE-BX10-D device is always connected to a device of 1000BASE-BX10-U with one strand of SMF standard with functioning of the chain of transmission, up to 10 km.

  The communication on a single strand of fiber is achieved by separating the wavelength of transmission of both devices, as shown in Figure 2: 1000BASE-BX10-D transmits a channel 1490 nm and receives a signal of 1310 nm, while 1000BASE-BX10-U transmits at 1310 nm wavelength and a signal of 1490 nm. As shown, the presence of a separator of multiplexing (WDM) length of wave-division integrated with SFP to split the 1310 nm, 1490 nm light railways.

  Figure 4.      Two-way transmission of a single strand of SMF

  

  GLC-BX-D and SFP GLC-BX-U supports also digital Optics (DOM) of the functions of surveillance in accordance with approval of the standard of the industry (MSA) multisource SFF-8472. This feature gives the end user the ability to analyze parameters in real time of the FPS, such as the optical output power, optical input power, temperature, laser bias current and transceiver supply voltage.

• DWDM SFP modules - where to use?

  Hi, we intend to interconnect two sites using DWDM. What type of SFP modules (color, color No 1310) should we use on our connection to the multiplexer/OADM switches? Does rely on the real device of MUX?

  DWDM and OADM multiplexers filters have ports specific wavelength, which are connected to an optical transmitter/receiver of the same wavelength.  Here is a link to the pluggable optical transceivers of Cisco DWDM

  http://www.Cisco.com/en/us/products/ps6576/index.html

  Cisco DWDM filters options linked below:

  http://www.Cisco.com/en/us/prod/collateral/modules/ps5455/product_data_sheet0900aecd806a1c36.html

  http://www.Cisco.com/en/us/products/HW/optical/ps1996/products_data_sheets_list.html

  Optical TRANSCEIVER for hardware compatibility

  http://www.Cisco.com/en/us/products/HW/modules/ps5455/products_device_support_tables_list.html

  Let us know if you have any additional questions.

• No Cisco SFP brand

  Are off brand SFP modules that ensure a Cisco compatibility worth anything?

  Like you can get copper GigE GLC - T of SFP = 3750's made by other companies how eNet for example?

  Disclaimer
  
  The author of this announcement offers the information in this publication without compensation and with the understanding of the reader that there is no implicit or explicit adequacy or adaptation to any purpose. Information provided is for information purposes only and should not be interpreted as making the professional advice of any kind. Use information from this announcement is only at risk of the reader.

  RESPONSIBILITY
  
  Any author will be responsible for any damage that it (including, without limitation, damages for loss of use, data or profits) arising out of the use or inability to use the information in the view even if author has been advised of the possibility of such damages.

  Poster

  What do you really want?  Ask yourself if it's a "good idea" to use brand X SFP in Cisco equipment?  If so, it is to you.  I believe that if you have problems with these SFP modules, Cisco will not support you unless you use their SPFS.

  Then, if the brand X SFP work and they cost less, then it can be a "good idea."  If you have problems, then it may not be a "good idea."  Can't tell how the reduced cost (?) vs Cisco support is important to you.  It's something you have to decide.

• For Fast Ethernet SFP modules

  Hello

  We are looking for fiber-to-ethernet converter.

  Is there any SFP module that plugs directly into the Fast Ethernet to a switch port.

  Please visit the following link: -.

  http://www.Cisco.com/en/us/prod/collateral/modules/ps5455/ps6578/product_data_sheet0900aecd801f931c.html

  He said "the Cisco100BASE-X Form Factor Pluggable SFP (Small) (Figure 1) is a hot output device that plugs into the Fast Ethernet ports, dual rate Fast/Gigabit Ethernet ports or Gigabit Ethernet from a Cisco switch ports or a router, which connects the port with the fiber cabling network.".

  If this module can be plugged into any port of FE, is it compatible with Cisco switches only?...

  Please reply,

  Thank you

  Amit

  The SFP port is just a place where the optical SFP is sitting in the switch (connect internally to power, data bus, etc.). SFP offers you the possibility to install a plug-in to adapt to the requirement of the network; If short-range fiber, fiber long reach or same RJ45 without changing an entire line card or switch.  SFP ports are integrated in the switch by a manufacturer, not bolted on after.  The specification for the connector module and SFP interface is detailed in an SFP MSA (multi-source agreement); designed to offer a platform in the industry to build.

  If your switch has a fixed electric port and you do not have access to power (for a converter to media or other), then the terminal switch will be replaced by a device with a fiber interface option. That, or you'll find a power on fiber system with enough power to drive a Media Converter (which I don't think that there are still).

  I hope this helps!

• SG500 5 GB SFP module

  Hello

  I was wondering what fiber SFP module that I use to stack 5 GB SG500 referrals.

  In the data sheet it is said SFP - 10 G - SR can be used for battery of 10 GB switches of SG500X, but does not say if she can or cannot be used on the SG500.

  I use mulitmode fiber and the distance is less than 200 m.

  Thank you.

  Tom, this was to be the most infuriating conversation to read. The poster kept asking what FPS to use for exploitation at 5G FIBER, and you kept giving him options of COPPER to a limited cable length. He said several times that length copper SFP fixed does not work because of the switches being some distance.

  Girard, according to the Guide of Directors, 10GbE fiber will only work at speed and can not 'falling' at 5GbE. There is no module fiber that run to 5GbE, only 1 GbE and 10 GbE. If you need fiber, your uplink is limited to 1GbE, as the SG500 does not support fibers 10GbE.

  See the guide for more information (Page 66/67):

  http://www.Cisco.com/en/us/docs/switches/LAN/CSBMs/Sx500/administration_guide/500_Series_Admin_Guide.PDF

• By cDAQ chassis module names?

  Hi all

  is there a way to get the module name based cDAQ chassis?

  I'm just checking if two (or more) identical chassis with different modules are connected to my PC.

  Example:

  Module 1: cDAQ-9174 with Modules 'A', 'B', 'C', emptySlot, in the right order

  Module 2: cDAQ-9174 with Modules 'd', 'E', 'emptySlot', 'emptySlot '.

  Problem:
  The property 'ActiveDev' node, then recovering the ProductType output array of [cDAQ-9174, cDAQ-9174, A, B, C, D, E,.. .and system peripherals]

  I do not see the modules are plugged into the chassis.

  Any help is appreciated!

  Thanks in advance

  Achim

  Hello Achim,

  Please see the attachment or the screenshot for the requested features.

  The example is a modified version of this example:

  Community: Get the cDAQ Types of Module in LabVIEW - National Instruments
  https://decibel.NI.com/content/docs/doc-15978

  If you wanted to say something different, just write me again.

  Best regards

  Christoph

• Fault Module name: llcommon.dll

  Hi people:

  I ran recently Dr. Clean up and now I can't keep my Second Life and InWorldz views running.  They share the same error message

  Fault Module name: llcommon.dll

  Therefore, I conclude that the problem is that a dll file has been "cleaned".

  Can someone advise or help me replace the said missing file?

  Hello

  1 are you getting this error only when you try to open these two specific games?

  We suggest not using registry cleaners non-Microsoft or clean the tools necessary to make settings on the Windows registry or Windows System files, as this can cause problems of stability with the Windows system files. By hoot or by modifying the Windows registry can cause serious damage to the Windows system files and could break your operating system Windows causing data loss that would be not possible to recover.

  Reference:

  Registry cleaners are needed?

  http://Windows.Microsoft.com/en-us/Windows-Vista/are-registry-cleaners-necessary

  I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.

  Troubleshooting steps:

  You can try scanner SFC search missing or corrupt files that can cause this problem.

  Of file system (CFS) when checking that all the Windows 7 system files are intact and not altered, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  d. you should see the following message on the screen:

  From the analysis of the system. This process will take time.

  Start of the phase of verification of the scanning system.

  % Of verification complete.

  e. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  See the following article for more information: http://support.microsoft.com/kb/929833

  Please provide us with additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• APPCRASH module name btwapi.dll getting the error "Windows Explorer has stopped working... »

  Hello
  In the home edition of Vista 32 IE 8 when I get the "search for files and folders:

  «Windows Explorer has stopped working...» "and in the watch box Details view:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Explorer.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01da5
  Fault Module name: btwapi.dll
  Fault Module Version: 6.0.1.5500
  Timestamp of Module error: 46df031a
  Exception code: c0000005
  Exception offset: b 0004, 091
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  I hope you can help me on this...
  Thanks a lot guys.

  Hi PaulMazor,

  Well first of all, btwapi.dll is a process no system developed by Bluetooth. If you go on your computer, try to disable Bluetooth by going to network and Internet or however your wireless interface is configured on your computer. If you don't have Bluetooth on your computer, try to uninstall it. go to start > Control Panel > programs > uninstall programs > scroll down and uninstall. My last suggesting opens upward, the Windows Task Manager (press ctrl + alt + delete and release). Go to processes and disable the application there. Other that that, I can't help you any further.
  Good luck
  DJ

• VZAccess Manager.exe accident fault Module name: VPNManagerSA.dll

  Windows Vista 32 - Bit, x or x 64... I'm not sure, Sp2 APPCRASH. ?
   
  Someone knows any FREE programs that I could use to fix the APPCRASH?

  (More if I posted this in the wrong forum. I don't LIKE) I just want to help. =/
  Here is the signature of the problem
  Problem event name: APPCRASH
  Application name: VZAccess Manager.exe
  Application version: 7.0.1.8
  Application timestamp: 4a179fe1
  Fault Module name: VPNManagerSA.dll
  Fault Module Version: 2.0.0.24
  Timestamp of Module error: 4a0c2e3d
  Exception code: c0000005
  Exception offset: 000301ad
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160
  Additional information about the problem
  Bucket ID: 1411790229

  The VZAccess Manager is Verizon Access manager for businesses.

  Click on the link to Verizon to see if your version is compatilbe with Windows 7.
  http://vzam.NET/Download/supported.aspx

  You can check the thread below to see if it is compatible with Windows 7.
  http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/2e9d95a4-D508-4f5f-b3d4-81c4c0678484

• Error Module Name:_ShFolder.dll_unloaded

  I work a lot with DVDs. When I try to access the Video_ts file via windows Explorer, I get an error message "windows Explorer has stopped working". After I restart windows Explorer, I can access the files without a problem. This happens with DVDs that are in my DVD player and files that have been copied to my computer.

  Of the event viewer:

  Explorer.exe
  6.0.6001.18164
  4907e242
  Shfolder.dll_unloaded
  0.0.0.0
  4549bdb5
  c0000005
  6dbe1560
  A78
  01cb70b1ebddc0e0

  In the details error message box:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: explorer.exe
  Application version: 6.0.6001.18164
  Application timestamp: 4907e242
  Fault Module name: ShFolder.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4549bdb5
  Exception code: c0000005
  Exception offset: 6dbe1560
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Information additional 01:40 d 4
  More information 2: 4062ad41ec8067256aa4c5e2b56d3c79
  Information additional 03:40 d 4
  Additional information 4: 4062ad41ec8067256aa4c5e2b56d3c79...

  What is ShFolder.dll_unloaded and how to stop the formation of flaws?

  Hello

  It seems that something in your startup is causing a problem. Maybe antivirus/antispyware.
  security or other programs.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------------------------

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• [SOLVED] Windows 7 64 bit freezes constantly with games - APPCRASH - fault Module name: d3d9.dll

  Greetings,

  I had Vista 64 and now updated upgraded to Windows 7 64-bit.  80% of my games crash when loading.

  Like others, I googled the shiznit out of this, it seems that most people crash some time in a game, I crash without the loading of all thing.

  My setup.

  Processor information:
  Qx9770 (I run clocked and quick time, all crash modes)

  ASUS Striker II Extreme motherboard
    
  Version of Windows:
  Windows 7 (64-bit)
  Video card:
  Driver: NVIDIA GeForce 9800 GTX/9800 GTX +.
  Name of the DirectX driver: nvd3dum.dll
  Driver version: 8.17.11.9562 (driver 195.62, I also tried 196.xx)
  The DirectX driver version: 8.17.11.9562
  DirectX card: NVIDIA GeForce 9800 GTX/9800 GTX +.
  Number of monitors: 2
  Number of logical video cards: 2 (SLI and SLI No., always the crash)
  The main screen resolution: 1920 x 1200
  The desktop resolution: 3200 x 1200
  Sound card:
  Audio: speakers (SoundMAX Integrated D
  Memory:
  RAM: 4094 MB
     
  These games work out mainly, but also games not in steam crash.

  Fallout 3
  Halfllife 2
  Ghostbusters
  JadeEmpire
  MassEffect
  Mirror Edge of various other.

  Surprisingly Crysis works, Company of heroes.

  A typical accident brings up this window.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Fallout3.exe
  Application version: 1.7.0.3
  Application timestamp: 4a40f18b
  Fault Module name: d3d9.dll
  Fault Module Version: 6.1.7600.16385
  Timestamp of Module error: 4a5bd9a9
  Exception code: c0000005
  Exception offset: 00004bc5
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 3081
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Any suggestions?

  Hello Ericsz,

  There are several issues that can cause this and other problems that lead to the Appcrash error. There is another post which has several steps to resolve the problem, try the steps and see if they help.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/APPCRASH-error-when-playing-some-games/dfc6f06c-A75F-4306-AC85-35dbbf8485a9?TM=1323661425093

  LD

• Channeling ether on two different sfp modules

  Hi Experts,

  I would like to know if a channel of ether can be created using two different SFP modules IE using

  GLC-sx-mm and glc-lh-sm on a switch or any other device.

  Thank you

  Abdul Malik.

  I have tried something like this in production. But bearing in mind that you can group copper and SFP interfaces in etherchannel so they have the same speed, L2/L3 config etc I think it's possible... but not 100% sure

  HTH,
  Dragan

• weird problem with Terracopy, failed module name: ntdll.dll.

  LM, I was wondering how to fix this problem:

  Name of the failing application: teracopy.exe, version: 2.3.0.0, time stamp: 0x52a2ba02
  The failed module name: ntdll.dll, version: 6.1.7601.22436, time stamp: 0x521eaa80
  Exception code: 0xc0000005
  Offset: 0 x 00032532
  ID of the process failed: 0 x 710
  Start time of application vulnerabilities: 0x01cfd4875bf40e52
  The failing application path: C:\Program Files\TeraCopy\teracopy.exe
  The failed module path: C:\Windows\SysWOW64\ntdll.dll
  Report ID: a3d32145-407a-11e4-9b85-c3289d97281b

  Hello

  I am happy that the problem didn't happen after the downgrade.

  Ntdll.dll is mainly concerned with system tasks and includes a number of features of kernel mode that allows a "Windows Application Programming Interface (API)". The ntdll.dll is also responsible for messages, timing, threading and synchronization in the operating system.

  Since you don't have any problems, I wouldn't worry about the dll file.

  Answer if you have issues with Windows.