Citing the addressbook

Similar Questions

• hr_assignment_api.update_emp_asg_criteria - contact your system administrator citing the procedure and step 40.

  Hi all

  I looked online and found this question popping up but without a clear solution.

  I have reduced API hr_assignment_api.update_emp_asg_criteria to a minimum and still can't seem to update my existing assignment. I use all the current values on the assignment so I know that all values are valid and configuration. Also, I checked and my people flexfield group is enabled and allowing the dynamic insertion. I also ran:

  INSERT INTO fnd_sessions (session_id, effective_date)

  Select ('sessionid'), SYSDATE USERENV

  of the double

  If USERENV('sessionid') not in (select SESSION_ID from fnd_sessions);

  Any help would be greatly appreciated!

  I get the error:

  Error report-

  ORA-20001: System error: procedure in step 40

  Cause: The procedure created a mistake in step 40.

  Action: Contact your system administrator citing the procedure and step 40.

  ORA-06512: at "APPS.HR_ASSIGNMENT_API", line 17385

  ORA-06512: at "APPS.HR_ASSIGNMENT_API", line 15701

  ORA-06512: at "APPS.HR_ASSIGNMENT_API", line 15486

  ORA-06512: at line 26 level

  And here is my code:

  DECLARE

  ln_special_ceiling_step_id PER_ALL_ASSIGNMENTS_F.SPECIAL_CEILING_STEP_ID%TYPE;

  lc_group_name VARCHAR2 (30);

  ld_effective_start_date PER_ALL_ASSIGNMENTS_F.EFFECTIVE_START_DATE%TYPE;

  ld_effective_end_date PER_ALL_ASSIGNMENTS_F.EFFECTIVE_END_DATE%TYPE;

  lb_org_now_no_manager_warning BOOLEAN;

  lb_other_manager_warning BOOLEAN;

  lb_spp_delete_warning BOOLEAN;

  lc_entries_changed_warning VARCHAR2 (30);

  lb_tax_district_changed_warn BOOLEAN;

  -Select * from per_all_assignments_f where assignment_id = 18525;

  ln_ORGANIZATION_ID PER_ALL_POSITIONS.ORGANIZATION_ID%TYPE: = 612;

  ln_LOCATION_ID PER_ALL_POSITIONS. LOCATION_ID % TYPE: = 161;

  ln_job_id PER_ALL_POSITIONS. JOB_ID % TYPE: = 76;

  ln_grade_id HR_ALL_POSITIONS_F.entry_grade_id%TYPE: = 84;

  ln_assignment_id PER_ALL_ASSIGNMENTS_F.ASSIGNMENT_ID%TYPE: = 18525;

  ln_person_id NUMBER: = 23729;

  ln_object_number NUMBER: = 5;

  ln_people_group_id NUMBER: = 2410;

  BEGIN

  () hr_assignment_api.update_emp_asg_criteria

  p_effective_date = > trunc (sysdate),.

  p_datetrack_update_mode = > "CORRECTION."

  p_assignment_id = > ln_assignment_id,

  p_location_id = > ln_LOCATION_ID,

  p_grade_id = > ln_grade_id,

  p_job_id = > ln_JOB_ID,

  p_organization_id = > ln_ORGANIZATION_ID,

  p_people_group_id = > ln_people_group_id,

  p_object_version_number = > ln_object_number,

  p_special_ceiling_step_id = > ln_special_ceiling_step_id,

  p_group_name = > lc_group_name,

  p_effective_start_date = > ld_effective_start_date,

  p_effective_end_date = > ld_effective_end_date,

  p_org_now_no_manager_warning = > lb_org_now_no_manager_warning,

  p_other_manager_warning = > lb_other_manager_warning,

  p_spp_delete_warning = > lb_spp_delete_warning,

  p_entries_changed_warning = > lc_entries_changed_warning,

  p_tax_district_changed_warning = > lb_tax_district_changed_warn

  );

  END;

  It turns out that all of my trouble was because of NLS parameters in SQL Developer. Tools > settings > database > NLS. Now, I chose to ignore the settings NLS and things work much better.

• citing the camera with the parameter?

  Hello

  I want to take a picture with a specific resolution like 640 x 480, so it is possible to control the camera with a program?

  Are there ways to pass arguments as arguments of the camera at the request of invoke. can I specify the file name as argument so that it can be saved automatically.

  Suggestions in this regard will be helpful.

  The only way I found was citing without arguments like that

  Invoke.invokeApplication (Invoke.APP_TYPE_CAMERA, new CameraArguments());

  You can use ARG_CAMERA_APP or ARG_VIDEO_RECORDER to create a new instance of CameraArguments for the camera app or application of VCR.

  Press the button Bravo thank the user who has helped you.

  If your problem has been resolved then please mark the thread as "accepted Solution".

• TB has worked fine until yesterday when I needed to send a message to more than 100. I divided the AddressBook into pieces and sent about 50 when TT502 came.

  I use TB 31.7.0, PC Windows 7. Had no problems until now. I divided the 100 addresses in groups of about 20 and sent to 3 groups. The 4th was wrong and I got the message: "too many recipients, TT502. I cut down the number of addresses, but the problem persists. I can't send all messages now, even to a single recipient. So I have a problem that does not reset when tuberculosis is turned off and restarted. Incoming is fine but I can't answer. Any ideas?

  Looks like you reach the limit of the sending of your provider. Of course sending for 1 person isn't too unless your provider has a hourly or daily limit and cut you.
  Given that the error has an associated server code the error came from your server vendors. Thunderbird would have nothing to do with it.

• When you add a new contact in the addressbook, I want the default value for the display to be last, first. How can I do that by default?

  I want the names displayed in my address in a formal way books:
  Jones, Fred
  Nixon, Jay
  Smith, Gertrude

  and I would prefer that display be created this way when I enter the first and last name.

  Thank you

  Del

  Open the address book
  Select View-Show as last, first name

• Where can I find the AddressBook to thunderbird?

  Had to manually load Thunderbird mail in new PC and I need to locate the address book on the old hard drive. Where it could be stored?
  Thank you

  http://KB.mozillazine.org/Moving_address_books_between_profiles

• Citing the text of reply Email

  How to change your preferences for quoting the original message in an e-mail response message when you use Windows Mail in Vista (not Outlook)?  The original message used to be quoted below my new outgoing message.  Now for some reason, he started quoting above my new outgoing message and shake my answer all the way to the bottom of the net.  I looked in the tools options settings and don't see anything there.

  Tools | Options | Advanced tab | Reply/forward. Uncheck: Write the answer at the bottom of the original message. Bruce Hagen ~ MS - MVP [Mail]

• citing the camera with the settings?

  Hello world.

  Is it possible to invoke the camera with specific parameters, on or off? As if I want to call the device by an active grid (assuming it wasn't before). Is this possible?

  Thank you, dev.

  No, which is not supported.  All parameters for the call of the camera are listed here: opening the camera map

• Citing the BlackBerry map using address to find

  I'm trying to find a code example for call BlackBerry address card. I checked the page http://developer.blackberry.com/native/documentation/cascades/device_platform/location/sharing_integ... , but I couldn't find a sample where the cards are called simply by giving the address busineess since the native application.

  Any help will be really appreciated...

  I have found the solution (I hope it will work for almost any situation)

  MapInvoker has a "searchText" property that is normally used with LocationMapInvoker or RouteMapInvoker to search for specific things like music or pizza after giving the coordinates (longitude and latitude). now without any parameters, just setting "searchText" with address and call LocationMapInvoker.go (), it will show the address of the card

• Citing the BBM in qml

  Hello guys how are you

  I try to call bbm to open my bbm channel in qml, I'm stuck in these codes and I don't know what to do

  {ActionItem}
  Title: 'BBM CHANNEL. "
  imageSource: "asset:///icons/ic_notes.png."
  attachedObjects:]
  {InvokeActionItem}
  ID: bbm
  query {}
  invokeTargetId: "sys.bbm.channels.card.previewer".
  invokeActionId: "bb.action.OPENBBMCHANNEL".
  URI: "" bbmc:".
  }
  }
  ]
  onTriggered: {}

  }
  }

  I tried many things, but all of them didn't work

  Also I don't know how to trigger the call using onTriggered

  any help on this?

  Thanks a lot guys

  Please note that I am glad that I can help , what I did was simply using propety Invocation in an attachedObjects

  That's what I did

  {ActionItem}
  Title: "my string".
  imageSource: "asset:///icons/ic_bbm.png."
  attachedObjects:]
  {Of invocation
  ID: invokeBBMC
  query {}
  invokeTargetId: "sys.bbm.channels.card.previewer".
  URI: "bbmc:C002151A4".
  }
  }
  ]
  onTriggered: {}
  invokeBBMC.trigger ("bb.action.OPENBBMCHANNEL")
  }

  You can find more information, so that the implementation that c ++ here:

  https://developer.BlackBerry.com/native/reference/Cascades/bb__cascades__invocation.html

  Peace

• Citing the calendar in day of the week (Mon, Mar, sea etc)...

  Hello

  How to invoke the native calendar to a specific day of the week, as Monday.

  If today is Monday call for Monday, if today of call Tuesday to next Monday, etc.

  You're right, official docs seems to be inaccurate, it must be:
  Action: "bb.calendar.OPEN."
  MIME: "text/calendar".
  Data : '? "view annex = & date = MON Jul 20% 2027% 202015.

  'view' application works and will actually view day but date of query does not work, although I respected the date format required in this doc:
  https://developer.BlackBerry.com/native/documentation/device_platform/invocation/calendar.html

  I tried with a few different date format but cannot make it work.

• Citing the part of the user interface of the game without head in an app without head

  Hello

  I try to call my interface section user app without head of service class (part long term without a head), as shown below:

  application of BB::System:InvokeRequest;

  request.setTarget ("com.myDomain.myAppName");

  request.setAction ("com.myDomain.myAppName.START");

  InvokeTargetReply * response = m_invokeManager-> invoke (request);

  {if (Reply)}

  QObject::connect (response, SIGNAL (finished (()), this, SLOT (onInvokeResult ()));

  _invokeTargetReply = response;

  }

  else {}

  qDebug()< "failed="" to="" start="" invocation:="">

  }

  the error response is always "not objective". I double checked that the id of the target is my id app (user interface section) and that it is registered as target to call in the xml file bar

  
  application
  myAppName
  
  Icon.PNG
  
  myAppName
  

  I don't know why he keeps giving me the error response target?

  Made a typo, the Notification and NotificationDialog are part of the bb: platform.

  Here are their respective documents:
  Notification https://developer.blackberry.com/native/reference/cascades/bb__platform__notification.html#function-...

  NotificationDialog https://developer.blackberry.com/native/reference/cascades/bb__platform__notificationdialog.html#fun...

• Problem adding attachment with pragmatism and citing the e-mail application

  
  

  MSohm said that the MDS Simulator has limited capacity for attachment, I can't tell if that is the problem, but it seems likely. You should look for a real device confirm. not everything can be developed with a simulator.

• Citing the phone to dial a number

  I'm trying to dial a phone number of my app running on my BB Z10. I was able to launch the phone application and bring it to focus, but it does not dial the number. I have tried the following to dial in number 9999:

  navigator_invoke_invocation_create (& iRequest);

  navigator_invoke_invocation_set_id (iRequest, '1');

  navigator_invoke_invocation_set_action (iRequest, 'bb.action.DIAL');

  navigator_invoke_invocation_set_type (iRequest, 'application/vnd.blackberry.phone.startcall');

  "{" string data = '{\"number\': \"9999\ '} ';

  navigator_invoke_invocation_set_data (iRequest, data.c_str (), data.length ());

  navigator_invoke_invocation_send (iRequest);

  navigator_invoke_invocation_destroy (iRequest);

  I also tried sending as URI instead of the data :

  navigator_invoke_invocation_create (& iRequest);

  navigator_invoke_invocation_set_id (iRequest, '1');

  navigator_invoke_invocation_set_action (iRequest, 'bb.action.DIAL');

  navigator_invoke_invocation_set_type (iRequest, 'application/vnd.blackberry.phone.startcall');

  navigator_invoke_invocation_set_uri (iRequest, ' data : //local?number=9999 ");

  navigator_invoke_invocation_send (iRequest);

  navigator_invoke_invocation_destroy (iRequest);

  In both cases, the phone will appear but do not dial.

  You could do that.

  Phone phone;
  phone.initiateCellularCall(number);
  

  With the help of the class of phone.

  https://developer.BlackBerry.com/Cascades/reference/bb__system__phone__phone.html

• Citing the native SMS

  Hi all

  I developed a small application in blackberry jde 4.7. I invoke the native client SMS and I want my application to die after that I have to call the sms client. But when I click on send, the message is sent successfully and it takes me to the Inbox.

  But after the if I hit the ESC key, nothing happens and crashes just the sms application.

  I tried to hit the end button, and I struck my request once again. But in the debugger, I get the message that my application is already running.

  I tried a work around and implemented outboundmessagelistener to close the application when the Send button send is reached.

  But the problem is sometimes the listener is added successfully and sometimes not. I tried various autour works and even tried through a midlet (but which causes a problem different http://supportforums.blackberry.com/t5/Java-Development/Invoking-SMS-in-a-midlet/m-p/508823#M103011 ).

  Is anyone have a work around? Thanks in advance.

  Hello

  I discovered a way to solve the problem. In the documentation, they gave as it will lift

  the 'operation error cannot perform a client connection' if its open as a client connection. For example: the number. So I changed the way I gave below (and this becomes a connection to the server and no error )

  MC MessageConnection = (MessageConnection)Connector.open("sms://:0");

  But I wonder why this code did not produce any error in other d but 4.5. I also see something weird to 8300.

  Thanks jCarty for helping me