Class BOM with mutually exclusive components option: box is protected from update

Similar Questions

• Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

  Hi all

  I tried to apply the patch from Jan 2016 to the Weblogic Server that runs the RMS Application.

  The version of the Weblogic Server is 10.3.6

  The version of RMS App is 13.2.6

  While applying the patch that has a PATCH-LIST of S8C2 on the Weblogic Server, I encountered the following error:

  [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

  Checking for conflicts...

  Detected A - conflict to solve and run the installation of the patch again

  Conflict condition details below:

  Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

  After reading the forums, I followed the suggestion to delete the previous patch: EJUW and who has obtained successfully removed as shown below, when I tried to install the Patch Jan complained conflict ZLNA patch and when trying to remove the ZLNA encountered unrecognized patch ID patch: ZLNA.

  [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = EJUW-prod_dir = $WLS_HOME/wlserver_10.3

  Checking for conflicts...

  No conflict detected

  Removal of the Patch ID: EJUW...

  Result: success

  [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

  Checking for conflicts...

  Detected A - conflict to solve and run the installation of the patch again

  Conflict condition details below:

  Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA

  [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = ZLNA-prod_dir = $WLS_HOME/wlserver_10.3

  Encountered unrecognized patch ID: ZLNA

  Any suggestions how to solve and apply the fix successfully Jan would be useful.

  Thank you.

  Hello

  Can you please set the download directory of the fix for MW_HOME/utils/bsu/cache_dir/with the help of Smart updated interface and test again.

  To designate a directory to download the hotfix, follow these steps:

  Start the smart update.

  On the Smart Update main window, choose file > Preferences.

  The Preferences dialog box appears.

  In the section Patch download directory of the Preferences dialog box, specify the path to the download patch directory.

  https://docs.Oracle.com/CD/E14759_01/doc.32/e14143/start.htm

  Thank you

  Aishwarya

• Mutually exclusive check boxes

  I know that this question is asked a lot and I read through the other posts. My code still does not work. I tried all the variations I've seen here, using null instead of 0, using quotation marks, do not use quotes, double equal signs, no double equal signs... What am I doing wrong? I'm really new to JavaScript, so I'm not sure on the syntax stuff yet.

  assessment. Questions.Questionset.Questiondetail.TFdetail.False_check::click - (JavaScript, client)

  If (this.) RawValue is "1")
  {
  xfa.form.assessment.Questions.Questionset.Questiondetail.TFdetail.True_check.rawValue = 'no l';
  }

  assessment. Questions.Questionset.Questiondetail.TFdetail.True_check::click - (JavaScript, client)

  If (this.) RawValue is "1")
  {
  xfa.form.assessment.Questions.Questionset.Questiondetail.TFdetail.False_check.rawValue = 'he's naked'.
  }

  OK if you check the correct value. Checkboxes are not mutually exclusive... .radioButtons are. You can move these objects to radio buttons and change the appearance of the radio button for a place to make it look like a checkbox, but behave like a radiobutton.

  You can share your form it would make it easier to debug.

  Paul

• Application of mutually exclusive

  Hi all

  Could you please help me in this problem.

  CREATE TABLE TEST_VERSION (VERSION_ID NUMBER, SUBVERSION VARCHAR2 (100));

  insert into TEST_VERSION VALUES(1,null);

  insert into TEST_VERSION VALUES(1,'Alpha');

  insert into TEST_VERSION VALUES(1,'Internal Beta');

  insert into TEST_VERSION VALUES(1,'Technical Preview');

  insert into TEST_VERSION VALUES(1,'RTM');

  insert into TEST_VERSION VALUES(2,null);

  insert into TEST_VERSION VALUES(2,'Alpha');

  insert into TEST_VERSION VALUES(3,'Internal Beta');

  insert into TEST_VERSION VALUES(4,'Technical Preview');

  SELECT * FROM TEST_VERSION;

  Select rules:

  for given version_id:

  (1) if there is a SUBVERSION = 'RTM' or the lines in the game and also a line with SUBVERSION = NULL ignore the

  line with SUBVERSION = NULL, and then select all of the other lines, including RTM

  (2) if there is a SUBVERSION row = NULL and there is no line with SUBVERSION = "RTM" then select all the

  lines, including SUBVERSION = NULL

  In essence, row with SUBVERSION = NULL cannot coexist with SUBVERSION = "RTM" for the same

  version_id. They are mutually exclusive. RTM has a higher priority.

  873797 wrote:

  Ramin thanks for your response.

  Your answer works partially.

  For a = 1, it returns the correct values, removed B = NULL row

  For the test of the ranks, he returned only a single line for a = 2. Rest of the lines for a = 3 and a = 4 has disappeared.

  Hello. Okay, I think that now I understand you. Try

  t (a, b) as)

  Select 1, null of union double all the

  Select 1, 'Alpha' from dual union all

  Select 1, 'Internal Beta' dual Union all

  Select 1, 'Technical Preview' from dual union all

  Select 1, 'RTM' from dual union all

  Select 2, union null value double all the

  Select 2, 'Alpha' from dual union all

  Select 3, 'Internal Beta' dual Union all

  Select option 4, "Technical Preview" of double)

  Select * from)

  Select t.*,

  sum (case when b is null then 1 when b = "RTM" then 1 end) on (partition one) c

  t

  )

  where nvl(b,'-1')! = (case when c = 2 then '-1' another '1' end ')

  ----

  Ramin Hashimzade

• My screen display options box continues to appear without pushing me anything, it appears and begins to go through the options in itself?

  My screen display options box continues to appear without pushing me anything, it appears and begins to go through the options in itself?

  Hello

  It could be hardware or software related. You can view these methods:

   

  Method 1.
  Computers get slower for various reasons: files become disorganized, unnecessary software consumes resources, readers of network unused slow start or too many programs run automatically at startup. Larger, serious questions can dramatically too slow down your computer's performance. You may have a virus or have need troubleshoot clean start.

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  
  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
   
  Method 2.

  Also, check out the steps that are listed in the articles below and check.
  How to set performance options in Windows XP
  http://support.Microsoft.com/kb/308417

  Restore the performance of your computer with Windows XP
  http://www.Microsoft.com/windowsxp/using/Setup/expert/northrup_restoreperf.mspx

• Microsoft Media Center remote with pace DC50X 1039, Setup box cannot change channel

  Can I use Vista Media Center to record only TV etc...
  Recently I had to use a configuration of Comcast Digital adapter carrier (DC50X) in order to get access to the channels.

  Vista recognize the Remote Setup Box, but it is not able to change the channels of the Remote Microsoft.

  On this page: http://mythtv.org/wiki/MCE_Remote I have the 3rd remote from left to right.

  I contacted PACE (the author of the configuration box) with the following response:
  ". The DC - 50 X uses a new remote protocol called XMP. Check to see if it can emit IR codes using the XMP Protocol.
  "If you use Microsoft remote issue codes using the XMP Protocol, it will not work with the DC 50 x"

  Anyone know if Microsoft Remote is able to use the XMP?

  Someone knows how the Media Center as the configuration box to change the channel?
  It looks like, it uses IR (due to the extra step of IR with the configuration box).

  If you have a WMC working with the DC50X, what is your Setup, what version of the distance, whats is your hardware configuration?

  My tuner (Hauppauge WinTV-PVR-500) can see the image, the sound is fine.

  Any help would be much appreciated.

  Deckard6, please see the Microsoft Hardware site:
  http://www.Microsoft.com/hardware/default.aspx

  Also try:
  Remote control for Media Center PC with Windows

  We can help you with Vista related components, if you feel that your Media Center software configuration is at fault for what you are experiencing, then we can try wrong turn, however, if it is indeed the remote transmitting Protocol, then it is not in our support framework. Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cisco SPA with problem of DHCP Options 66

  Dear all,

  I have a problem of my phone Cisco SPA for the autodeploiement.

  If I manually enter the page configuration and paste "[- pwd - password user uid] http:///dms/def/spa$PSN.cfg" in the profile rule. Everything works perfectly.

  However, we would like to do in the provision of zero touch, I add the "[- pwd - password user uid] http:///dms/def/spa$PSN.cfg"DHCP Options 66. " The SPA phone seems impossible to get the 66 Options parameter. It shows that "/ spa$ PSN.cfg" in the rule of profiles.

  I'm sure that the DHCP server works perfectly.

  Can anyone help on this?

  Kind regards

  Desmond

  You cannot use the custom during initial deployment (zero touch) password. DHCP can be used to deliver key to the device in this way.

  Ok. What are the options you have?

  You my use of the configuration file, compiled with SPC type -target option. It encrypt the file by using the password from each device Mac so you need no password given to the device - device can calculate the password required their Mac. It provides just basic security level - insensitive user, like me, know the algorithm used for password generation so that it can calculate the password and decrypt the file.

  You can use HTTPS with mutual certificate authentication to deliver XML or SPC configuration form. All phones have the unique client certificate, then you can be sure that the request has been issued by the unit. It offers a high level of security.

  There are also a few other possibilities, but disclosed so that information on the goal you want to hit, so I can't list.

  Just note that DHCP will meet anyone, in addition, the answer may broadcast (therefore handed to anyone, even without prior request). If you deliver critical data via DHCP, you can consider them publicly available. Security resulting is without security.

• Using SQL to ensure the matching records are mutually exclusive.

  There are two tables defined in the following way:

  Table A

  Number 1

  Number 2

  Date

  ROWID

  Table B

  Number 1

  Number 2

  Date

  Identifier of the line

  Each table stores a call between number 1 and 2 on a specific date. The goal is to map exactly one entry of table A with exactly the record in table B

  in a mutually exclusive way. So a single call to a table must be associated with exactly one call the other table (the key is here

  A.Number1 is B.Number1 and A.Number2 = B.Number2). Because it is a relationship is many to many (the number of source and destination may be paired multiple)

  (time), I'm not able to build a series of sql statements that will allow me to get a relationship one between pairs of telephone numbers.

  I'm not allowed to develop a PL/SQL procedure, which would easily solve this problem.

  I was able to find a solution using MIN(Number 1) KEEP (DENSE_RANK FIRST ORDER BY Date) to THE (PARTITION BY x) the form x

  using temporary tables, which allows me to reach a breaking successively much many relationships (i.e. three broken bones in a 01:58 after

  an iteration, and after one iteration, I arrive at a one to one relationship). However, I can't break these relations some n number of times because it requires number n

  hard curls. Therefore, I need a sophisticated solution that will allow me to achieve a relationship one by one.

  Example of

  Table A

  Record 1

  Number 1:451923456789

  Number 2:541969432045

  Date: 29/07/2015-09:01

  Worksheet 2

  Number 1: 451923456789

  Number 2: 541969432045

  Date: 29/07/2015-09:03

  Table B

  Record 1

  Number 1: 451923456789

  Number 2: 541969432045

  Date: 29/07/2015-09:04

  Worksheet 2

  Number 1: 451923456789

  Number 2: 541969432045

  Date: 29/07/2015-09:05

  If we unite our table A and B by A.Number1 = B.Number1 and A.Number2 = B.Number2, we have 4 records. I'm looking for exactly two records.

  The criteria is to associate by the minimum of the sum of the date of the table A table B date. Therefore, the final result should match:

  (1) record 1 of table A with record 1 of table B.

  sheet 2) 2 table A with 2 record in table B.

  So we must do something to reduce the 4 records resulting from the join of two records describe as we see above.

  The result of the join:

  1st row: TableA.Record1 with TableB.Record1

  2nd place: TableA.Record1 with TableB.Record2

  Rank 3: TableA.Record2 with TableB.Record1

  4th place: TableA.Record2 with TableB.Record2

  What I'm looking for, which is easily achievable with a slider, but not with SQL:

  1st row: TableA.Record1 with TableB.Record1

  4th place: TableA.Record2 with TableB.Record2

  Note that if the minimum date condition allows us to select the necessary records, we won't get the expected results. In other words, using the minimum date.

  the results will be:

  1st row: TableA.Record1 with TableB.Record1

  Rank 3: TableA.Record2 with TableB.Record1

  (criteria - table a minimum date)

  or

  1st row: TableA.Record1 with TableB.Record1

  2nd place: TableA.Record1 with TableB.Record2

  (criteria - date minimum table B)

  Two of these results to break the rule are mutually exclusive.

  Post edited by: 3000640

  If I understand correctly, something like:

  SQL > with tableA (id, telephone1, telephone2, call_date) as)

  2. Select 1, ' 451923456789 ', ' 541969432045',

  3 to_date (July 29, 2015 09:01 ', 'dd.mm.yyyy hh24')

  4 union double all the

  5. Select 2, ' 451923456789 ', ' 541969432045',

  6 to_date (July 29, 2015 09:03 ', 'dd.mm.yyyy hh24')

  double 7),

  TableB 8 (id, telephone1, telephone2, call_date) as)

  9. Select 1, ' 451923456789 ', ' 541969432045',

  10 to_date (July 29, 2015 09:04 ', 'dd.mm.yyyy hh24')

  11 double Union all the

  12. Select 2, ' 451923456789 ', ' 541969432045',

  13 to_date (July 29, 2015 09:05 ', 'dd.mm.yyyy hh24')

  14 double)

  15 select a.id help, a.phone1 aphone1, a.phone2 aphone2,

  16 a.call_date acall_date, b.id offer, b.phone1 bphone1,

  17 b.phone2 bphone2, b.call_date bcall_date

  18 (select id, telephone1, telephone2, call_date,

  19 row_number() over (partition by numbers1, telephone2

  RN 20 order by call_date)

  tablea 21) a

  22 join (select id, telephone1, telephone2, call_date,

  23 row_number() over (partition by numbers1, telephone2

  RN 24 order by call_date)

  tableb 25) b

  26 on a.phone1 = b.phone1 and

  27 a.phone2 = b.phone2 and

  28 a.rn = b.rn;

  HELP APHONE1 APHONE2 ACALL_DATE BPHONE1 BPHONE2 BCALL_DATE OFFERS

  ---------- ------------ ------------ -------------------- ---------- ------------ ------------ --------------------

  1 451923456789 541969432045 July 29, 2015 09:01 1 451923456789 541969432045 July 29, 2015 09:04

  2 451923456789 541969432045 July 29, 2015 09:03 2 451923456789 541969432045 July 29, 2015 09:05

  John

• Create/class library with graphics drawn in flash

  Hello

  I'm new to the forum and I use flash for a short time...

  
  

  I would like to create a library that contains the objects designed in flash and classes that manage.

  An example: the use of flash I want to create a user profile box. This box contains a circle (profile picture) and a label (username).

  After that I would create an ActionScript class to insert the image in the circle and the name on the label. In the end, I have a class that manages user profile area.

  After I would use this class in another flash project.

  I hope that I was clear...

  How can I do?
  

  
  

  Thanks to all those who wish to respond.

  Create a new movieclip and draw your graphic elements on the stage of this movieclip.  assign to each object you want to control with actionscript, an instance name.

  assign this movieclip a class (for example, by double clicking in the column link from the library panel adjacent to the movieclip symbol).  Right-click as movieclip and click on Edit class.  create the code required by your class.

  You can use this movieclip and class to any other project pro flash by dragging the movieclip symbol in the library of the other project and moving the class file to the new project class path.

• A license is required at the VASA? A license is required for each copy? VSI is necessary to have the VASA? They are mutually exclusive? VSI need NOTTM?

  A license is required at the VASA? A license is required for each copy? VSI is necessary to have the VASA? They are mutually exclusive? VSI need NOTTM?

  Thanks in advance.

  Assuming that you are referring to EMC arrays.

  License to the VASA: No.

  VSI required at the VASA: No. they work very well together, but does require that the other.

  VSI allowing VAAI: No. VAAI is active with or without the VSI.

• Any chance of an installable Image with Dell management components?

  Subject says it all.

  I just bought 3 new PE2970 and would like the Dell that me is available natively management components...

  Thanks for listening...

  Wow!  What a welcome in the VM world!  I was about to ask about upgrading the standard installation of ESXi to that with Dell management components, but I think I'll ask for help elsewhere.

  'VMware ESXi 3.5 Installable U4 with Dell management components' is now available under the section binaries in the ESXi download page option.

• report based on elements are mutually exclusive:

  Hi guys,.
  I am creating a parameterized report based on elements are mutually exclusive:
  
  I have a list select 'P1_Property_type' element that has these values (office, apartment)
  If you choose "desktop" then the report should ONLY the value of the selection list element 'P1_beds '.
  If you choose 'apartment' then the report should be considered AS the value of the selection list "P1_size."
  ----------
  I used this query, but it does not seem to contribute:
  

  Select * from realestate where
  unit_type = decode (: P1_PROPERTY_TYPE, 'null', unit_type,: P1_property_type)
  and
  (br = decode (: P1_beds, "null", br,: P1_beds) or size = decode (: P1_size, 'null', size,: P1_size))

  ----------------
  I hope my question is clear
  
  Kind regards
  Fateh

  Assuming you are using the literal string "null" instead of NULL.

  "it doesn't seem to work" because of this:

  (br = decode (: P1_beds, "null", br,: P1_beds) or size = decode (: P1_size, 'null', size,: P1_size))

  Assuming you choose 'office' and: has the value p1_beds and: p1_size is "null", you end up with a statement that is the equivalent of:

  select * from realesate
  where unit_type = 'office'
  and (br = :p1_beds
  or size=size)    <--------------problem
  

  and your: p1_beds restriction is so inefficient.

  I'm not a fan of decode for this logic.
  I prefer a clear statement of the exclusive predicates that the optimizer can sometimes deal more effectively.

  for example, assuming that it is irrelevant, if you choose office or apartment because the relevant parameter: p1_beds or: p1_size will have the appropriate value:

  select * from realestate
  where
        (:p1.property_type is null / = 'null'
  or    (:p1.property_type is not null / != 'null'
  and    unit_type          = :p1_property_type))
  and   (:p1_beds          is null / = 'null'
  or    (:p1_beds          is not null / != 'null'
  and    br                 = :p1_beds))
  and   (:p1_size          is null / = 'null'
  or    (:p1_size          is not null / != 'null'
  and    size               = :p1_size))
  

  Note that I have provided alternatives depending on whether you are actually the NULL or a magic string.

• Drop-down menus are mutually exclusive

  Hi all:

  I am working on a form in which I need to have a user rates four items 1 to 4 compared to the other. Initially, we were going to use 4 drop downs each menu containing four options allowing the user to choose. The problem is, of course, that the user could choose option 1 four times in a row. So I need a way to allow the user to assess these four points 1 to 4, but in a mutually exclusive way. the image below shows the problem (they are in Spanish, but the text is not important). Here point 1 and section 4 have been selected both as 1, which is what we want to avoid. Any suggestions would be greatly appreciated. Thank you.

  

  Hello

  You could have a script of the event preOpen all of the four drop-down menus that would set the display settings, based on the previous selections in the other drop-down menus.

  There is an example here to populate the drop-down menus: http://assure.ly/jcTahK.

  Try this in the DropDownList1 preOpen event:

  Remove the previously selected items

  this.deleteItem (DropDownList2.selectedIndex);

  this.deleteItem (DropDownList3.selectedIndex);

  this.deleteItem (DropDownList4.selectedIndex);

  Hope that helps,

  Niall

• How to make "In line with text" as default option

  I use 5.6 Pages to deal with certain documents that have a lot of pictures. When I paste an image of the document, the default option of "skin" for the image is "automatic", I have to manually change the "inline with the text" option each time and drag it to the right place, it's extremely frustrating. Is it possible to put "in line with text" as default option when I paste a picture?

  Hello RCN,

  Click in the text where you want the image to be inserted.

  Dough.

  If the focus is on the text, the image will be stick like 'Move with text;' if emphasis is placed on an object (eg. an image that does not move with the text), the image will stick like "rest on the Page.

  Kind regards

  Barry

• Firefox on the laptop of my wife lost the black bar that displays maps, Gmail etc. Now at the top of the screen there is an empty bar, triple height, with just the Google search box entry. How can I get that back? Or is it a question for Google?

  When I open Firefox there is a black bar, sometimes vertical, sometimes horizontal, in the upper part, with links to maps, Gmail etc. When I opened Gmail the same links are listed at the top of the screen, just under the tabs. In my wife's cell phone, it appears in the Firefox splash screen, but not in the form of Gmail. In the top of the screen is an extra-large gray bar with just one Google search box entry. Is this a problem of Firefox or Google?

  She has XP Home SP3 and Firefox 9

  Thanks for any help.

  Is there still the Google URL in the address bar?

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)