Clean install of windows 7 ultimate

Similar Questions

• Clean install of Windows 7 Ultimate 64 - bit on Qosmio X 870

  When I got my laptop (Qosmio x 870) I immediately uninstalled BONES because it was full of bloatware and installed a clean version of windows 7 ultimate 64-bit. After my installation I tried installing the drivers on my laptop, but some do not seem to work.

  My VGA driver installed, but the windows experience index for my graphics is 5.5 which is much lower than it should be (if memory serves right it was 7.4 before I uninstalled the original O.S inflated). However, the biggest problem I encountered is the network driver. I installed all network drivers unique on the page of the Toshiba driver for the qosmio x 870, but none seems not to work. For some reason, the laptop thinks my wifi is disabled, I know that it is not (unless there is a setting in the bios that needs to be changed if not I don't know).

  I really need some help here guys, if someone can me EXACT by the drivers I need this point would mean the world to me. Toshiba really should have a package of essential drivers, as most other computer companies have, it makes everything much easier for people who hate the bloated OS that comes with their laptop.

  > When I got my laptop (Qosmio x 870) I uninstalled immediately his BONES because it was full of > bloatware and installed a clean version of windows 7 ultimate 64-bit.
  In my opinion this is the biggest mistake that anyone can do after the purchase of brand new computer. But you're not alone.
  As a first step before doing this you create recovery discs, and I really hope that you ve done that.
  Second, I can understand you if you say that the recovery image contains many pre-installed tips that you don t like, but you should not install version of the OS. No one force you to use all this stuff. You can remove all the system software and configure OS preinstalled on the way you like it.

  And third, why you didn t post here and picked up some opinions until you started to install own OS? You might get some useful tips first.
  You can install the version of the own BONE but installation of additional things must / should be made after the right installation order. Computers laptops Qosmio have more complicated platform/hardware features and drivers, tools and utilities must be installed on the right track if you want to have all the features.

  Best thing you can do now is to reinstall the OS and continue to install all the extra stuff following the installation order posted by Lasko.

• No volume screen after a clean install of Windows 7 Ultimate

  Recently, I started College, my program gave me a free upgrade to Windows 7 Ultimate. Not having a clean installation since the purchase of this PC, I thought it was the right time to do it. I realize that when clean installation of windows, you will lose a few pilots, after a lot of research I was unable to find anything to display on for volume orders. If someone is able to find something that could solve my problem, it would be much appreciated.

  Thank you, Jason.

  I have a HP G62 225DX

  64 bit

  Windows 7 Ultimate

  Hello

  Download and install the latest version of HP OSD on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55152.exe

  Once done, restart the laptop.

  Kind regards

  DP - K

• HP 630: Full disc format and a clean install of Windows 7 Ultimate 64 bit.

  I'm already slot than Windows 7 Ultimate 64 bit OS in my system HP 630 (2 GB RAM, 320 GB HDD).

  I want to do a full format of the drive around & pure install a fresh copy of Windows 7 Ultimate 64 bit OS. When I restart the system with the CD in the ROM already, it does not show an option to boot the system from the CD (boot from CD). I changed the order of boot devices in BIOS & upgrade CD as first option, still it does not show me the option to boot from the CD. Please suggest me how to proceed with a full format of the drive.

  Thanks in advance.

  Hello

  Try the following.

  Remove the disc to install Windows 7 and laptop stop,

  TAP the ESC key as soon as you start the launch of the portable computer and then Start Menu, insert the Windows 7 installation disc.  Select boot options (usually f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Kind regards

  DP - K

• Fingerprint reader not working on M6-1045dx after a clean install of Windows 7 Ultimate 64 bit

  Hi all, I wanted to do a clean install on my new laptop and it's the only thing that I can't seem to make it work so far. The validity on the HP website driver is installed, but there is no software security listed for this device. I tried Protecttools and he said he has not been supported on this device, I tried too Pass Simple and it wouldn't start without crashing. I'm not even sure that I install the correct software. Any suggestions?

  Thank you

  David

  Perhaps the best thing you can do is to install the version of HP SimplePass latetst of AuthenTec.  It's a version of 'up' of what is currently available at HP and has all the features and functionality you need to SimplePass.  You will also be able to import your file, .tsd (backup password) If you have in your facility.

  • Download HP SimplePass of AuthenTec (V5.4.0.620).
  • Extract using 7-Zip software.
  • Double-click to start the installation process.

• HP MIni 210-2145 DX: clean install of Windows 7, now I can't find the wireless drivers that work.

  I have a HP mini 210-2145 DX.  I recently had to do a clean install of Windows Ultimate edition.  Now, I can get a wireless connection because I can't find the right drivers on the HP site.  I tried 12 + drivers that I downloaded.  They all seem to be for 32 bits, and it's 64-bit.

  Can someone please help me find the right wireless drivers to install?  Thank you.

  Try this different file and see if it works automatically and installs the driver.

  File name: sp57965.exe

  There was also support for the hardware ID you have posted.

  I have no problem downloading the file, or by using 7 - zip to extract the exe file downloaded to a folder that you can browse from the network controller to install the drivers.

  Unfortunately, I can't help you with the problem if the new file does not work.

• What drivers to download for a clean install of Windows 7?

  I'm working on a clean install of Windows 7 Enterprise SP1 on my HP Pavilion computer of bureau a6600f (originally there was Vista, now he has Windows 7 Ultimate). The machine is stable but really slow.

  If I want to download the drivers and others, which is here. But I don't really know what are those who... just do each of them?

  and then after installing Windows 7, I have just install these one by one?

  Here are the specifications of your desktop HP Pavilion a6600f. Based on the specifications, this model uses a nVidia Chipset nVidia Graphics, nVidia Network and Realtek HD Audio. If you have already done, I would update the BIOS first. I skip the installation of the HP drivers and go directly to the sites of the manufacturer for the latest drivers chipset.

  nForce Driver v15.56 for Windows 7 64-bit (Ethernet, SATA/IDE, SMBUS, pilot EMS and Away Mode driver)

  V307.83 GeForce Driver for Windows 7 64 bit (Graph)

  Realtek HD Audio Driver for Windows (Tick 'Accept', click 'Next', years download location for 3rd item to the bottom of the list)

  I think that your 'slowness' is due to the entry level Pentium E2200 CPU and only 3 GB of RAM. Consider one of the better microprocessors on the list and the upgrade to 4 GB RAM HP.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• (64-bit capable) 32 bit Vista Home Premium... I can do a clean install of Windows 7 64-bit professional?

  (64-bit capable) 32 bit Vista Home Premium... I can do a clean install of Windows 7 64-bit professional?... from a flash drive?... to change the boot order?... or at all?

  Hello

  That's right; with Vista Home Premiun upgrade paths are for Windows 7 Home Premium or Ultimate.

  It is one of the reasons why you should do a clean install.

  The other reason is that you can NOT put 32-bit to 64-bit.

  You need a clean install to do.

  Follow these steps before you install or buy Windows 7:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  _________________________________________

  And it's a way to do the clean install of Windows 7 DVD forn and Flash Player

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Using the USB method:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  See you soon

• clean install of windows 7 on HP9040n

  Hi all

  I had some problems with vista ultimate 32 bit of the House, and I'm looking to do a clean install with windows 7, as well as updates.  Are there any problems I should be aware, before you go out and buy windows 7?

  Thank you

  Joseph Carabetta

  The only thing that worries me is the lack of specific drivers for W7. Your only shows the Light scribe software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3550550#N176

  Here is a NVIDIA drivers directly from their website, which should work just fine.

  http://www.nvidia.com/object/Win7-WinVista-64bit-258.96-WHQL-driver.html

• Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.

  Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.

  Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.

  As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)

  Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.

  I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.

  In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.

  After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)

  After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.

  Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.

  Details:

  System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4

  • Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
  • Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported.  Ran NVRAM reset before each attempt.
  • At ran EtreCheck report which seemed OK.
  • Verification of diagnosis ran who is childless.

  A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.

  In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.

  Distill the results (the Boot Camp partition removed):

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk2

  1: disk2s1 NO NAME 209.7 MB EFI

  2: disk2s2 Apple_CoreStorage TB 3.0 drive internal

  3: disk2s4 Apple_Boot Boot OS X 134,2 MB

  / dev/disk3 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk3

  Logical volume on disk0s2, disk2s2

  7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  Fusion unencrypted drive

  iMac - simon: ~ list of cs simon$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 3121237860352 B (3.1 TB)

  Free space: 0 (0 B) B

  |

  +-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk2s2

  |   Status: online

  |   Dimensions: 3000249008128 B (3.0 to)

  |

  +--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  ---------------------------------------------------

  Disc: disk3

  Status: online

  Size (Total): 3106705375232 B (3.1 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  Summary:

  Q1: Should it take 4 + hours to install Windows 10 via BCA?

  Q2: Al must ultimately be so slow when initially W10 desktop?

  Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?

  Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?

  Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?

  Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?

  Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?

  Details:

  Day 5. Attempt at 6.

  Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.

  4 1/2 hours from start of Windows 10 initial signature window.

  Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.

  In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.

  Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.

  Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...

  He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.

  I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.

  Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.

  I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.

  Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.

  I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.

  For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.

• HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1

  Hello

  After a clean install of windows 8.1 the audio beats does not open.

  It appears in the control, but when I click on it nothing happens.

  I have sound, and everything seems to work ok, but I'm curious to know what happened.

  When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.

  I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.

  Any help would be appreciated

  Hello

  Download and reinstall the Realtek HD Audio software at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• error message iTunes displays locked drive, itl locked files, or do not have administrative privileges on the PC after a clean install of Windows 10

  Yesterday I did a clean install of Windows 10 on my PC with a backup of the hard disk external. I downloaded iTunes, but get an error message that the drive is locked, the .itl files are locked, or I don't have administrative rights to these files. I deleted and reinstalled the PCI DSS several times correctly in the PCI slot hoping that would be a solution, but to no avail. I am the only user on this computer and do not have administrative rights. Any help you can offer will be appreciated. Thank you

  This can help (from turingtest2):

  Fix iTunes for Windows security permissions

• Clean install of Windows 7 on Satellite L655

  I have a Satellite L655 and replace the HDD with a SSD (2 sheets) system (more small capacity, 1 partition). I also want to do a clean install of Windows 7.

  I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.

  > I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.

  What exactly do you want: clean windows installation or by using the disk Toshiba recover?

  I mean own installation only the Windows operating system using the Microsoft Win 7 disc.
  This installation requires a valid serial key.

  But using the Toshiba recovery disc requires no any key since the BONES of the window is already enabled on this drive.

• Portege Z830 - on a clean install of windows access keys

  What do I need to work the KEYS FN on a clean install of Windows?

  I have a Toshiba Portege Z830, width window 8.1 Professional (he cams 7 width windows).

  The first time I installed windows 8, I'm doing the hotkey working width drivers Toshiba a upgrade of windows 8.
  But now, after a new installation, it does not work.

  Some keys work, such as FN + 3 or 4 for the sound. But I think that it is a feature of windows. I need the combination of brightness FN + F6 or F7, and they do not work.

  What should I install? I read that I have to install the driver of Toshiba value added package system, but it does not work. There is also a utillity called Toshiba function key.

  What should I install?

  Thanks ;)

  *@Infocomit*

  Don t be angry with me, but you're wrong. Sometimes it s advisable to check some things twice.
  Driver Toshiba UE page provides details and description on the drivers and utilities.
  If you need to get the details about the unique software, click on the red arrow in the Details column.

  By the way: it's community of users.

• Satellite P305-S8820 - FN key not working after a clean install of Windows 7

  Hello

  I have a Toshiba Satellite P305-S8820. I recently did a clean install of Windows 7. I loaded the value Toshiba driver pack and the trackpad driver but still cannot get the trackpad or press FN to work.

  Any ideas?

  Hi taxwiz,.

  I think that the forum already contains hundreds of discussions about this so why you n t use the forum search?

  Anyway, you need the latest version of Toshiba Value added Package and utility Support Flash Cards.
  Try to also restart Toshiba Flash Cards (start > all programs > Toshiba) and repeatedly press the FN keys.