Clean up his allotted time on Wan

Similar Questions

• Receiving the message: a clock interrupt has not received on a secondary processor within the allotted time interval. What is the problem?

  My computer goes to blue screen and gives the message above and also said STOP: 0 X 00000101 (0 X 0000000000000031, 0 x 0000000000000000, 0XFFFFF88003163180, 0 X 00000000000000002) of physical memory on the drive of Dumping:

  First says Windows has been shut down to avoid damage.  A clock to interrupt not received on a secondary processor in the allotted time interval.

  Happens if my home screen appears and automatically plays a commercial or video file or if I try to play a video of Facebook, YouTube or my email etc.

  My computer is a Lenovo Z560.  He has done since the day that I brought home from the store.
  I should take that back when I bought first, but did not. I got this computer more than a year.

  Thank you.
  

  Hello

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error.

  Control bug 0 x 101: CLOCK_WATCHDOG_TIMEOUT-This indicates that an interruption of clock expected on a secondary processor in a multiprocessor system, has not received in the allotted interval.

  http://msdn.Microsoft.com/en-us/library/ff557211%28VS.85%29.aspx

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I suggest you to download the minidump files so that the experts here can analyze the cause of the error on a blue screen.

  Try using this link to download pictures and files on SkyDrive.

  Download pictures and files:

  http://Windows.Microsoft.com/en-in/SkyDrive/add-photos-files-FAQ

  Please post back with the State of the question.

• I bought an iPad 2 Air and reserved for a free service call to show me the ropes. Nobody phoned me in the allotted time. What should I do?

  I bought an iPad 2 Air and reserved for a free service call to show me the ropes. Nobody phoned me in the allotted time. What should I do?

  Click on the help link at the top of the page and connect with Apple

  Or you are welcome to ask us your questions

  iPad - configuration - Apple Support

  User Guide - Apple iPad

• Error blue screen "a clock interrupt was not received on a secondary prossesser in the allotted time interval.

  I get a blue screen that says that this A clock interrupt was not received on a secondary prossesser in the allotted time interval

  * original title - an interruption of clock has not received on a secondary owner in the amount of time allocated Windows stops and I get a blue screen that says this *.

  It is likely that your CPU is a failure.

  However, before replacing, try this

  1. If you are overclocking the processor, back to normal speed
  2. To avoid overheating, get a can of compressed air and dust out of your computer
  3. Go to the website of the manufacturer of the computer, download and install the latest drivers and BIOS for your model

• How to clean the files of time machine restore after reinstall

  Just did a wipe and reinstall on an iMac 2011 (10.8.5) mountain running Lion.

  I don't want to do a full restore from Time Machine; I just want to take a few important files (cache profiles, e-mail, etc.). [Did the reinstall because my system was flawed and nothing else I did fix it.] [The story is here:beachball recurring in all applications in Lion, finally freezes iMac]

  When I open Time Machine on my 'new' machine and turn it on, he says he has no previous backups, but begins to make its first backup in 120 seconds. There is no option to "enter" Time Machine and recover individual files.

  I then turn off Time Machine because I'm afraid that it will make a new backup and erase / unrecoverable my previous backups.

  The drive Time Machine target exists in disk utility. A 600 + files (backups, no doubt!) and verified without errors.

  Before the clean and reinstall Time Machine worked perfectly. I have test-recovered some files and everything was good.

  How do I introduce my iMac 'new' to my old backups Time Machine?

  Thank you

  Use tmutil inheritbackup such as described by the end Pondini in his FAQ, here: http://pondini.org/TM/B6.html. Follow the instructions in the blue box, entitled "inherit a backup. The is short and simple but please follow carefully.

  I believe that you won't always be able to restore individual files until that Time Machine backs up new, then let him. Once this is done, you will have access to your old backups.

  Alternate procedure: since you can not keep this old backup after the restoration of the individual in any case files, you can hold a key option key while clicking the Time Machine in your Mac's menu bar. A option «Browse other backup disks...» ' will be displayed. What to choose.

• in Windows 7, the past his off times randomly notify.wav

  I recently bought a new motherboard, so I reinstalled Win 7 64 bit SP1. I installed all critics optionally Win updates and except language packs. Any motherboard current CPU and GPU drivers are installed from their respective sites. I started to re - install the software I used before without a problem. About a day in the installation of programs the its generic notify.wav began to go from time to time. Maybe once every two hours or more. It is not "Windows Notify.wav" but "notify.wav" now days later, it happens again.

  I've read a few threads that I could find on what people seem to have solved in different ways and it was mainly related to the installation of a third-party program that caused the notification. I used CCleaner to clean all residual files from facilities. I still get the sound of notifiy.wav will at random times.

  I decided to try just remove notify.wav C:\Windows\Media

  When I tried, first of all, I get "you need to provide administrator permission to move this file."

  After clicking on continue I get

  'You need permission from TrustedInstaller to edit this file.

  If I click on try again, she persists with this message. So I can't remove it because of TrustedInstaller. This confirms a little what others say is a problem with the installation of other programs. But the sound notify.wav seems to turn off randomly... all while browsing the web, watch a video in media player or vlc, and there is no popup or a warning message that accompanies the sound.

  Do you know why this is happening and hwo to stop it.

  Success!

  I found what was the sound notification going off, with a huge thank you to John in winhelponline. It involves the use of Process Monitor to monitor the programs that might be using the sound notify.wav or any sound that you specify in the filter. His instructions are here:

  http://www.Winhelponline.com/blog/find-application-making-sounds-in-background/

  It connects a download Process Monitor in his explanation, but in case you miss it, it's here:

  https://TechNet.Microsoft.com/en-us/sysinternals

  In my case it was a simple calendar program I installed (iCalendar) right after you have installed Windows. He missed to install to give notifications of time schedules using notify.wav as sound, without further notice visible. Crazy boring.

  in any case, John method above can be used by those who are trying to find the source of any random its going in Windows.

• Skype phone with none his first time in 4 years. Not muted.

  I have a Skype phone pair phone 6.0 dect, and lt went Mute while talking. Everything done to get itback. Reset computor alsol first time in four years. STI has phillips. Ive rest sounds all over the place. IM lost, HE signed yet.

  (deleted number)

  Hello

  Check with the support of Skype and their forums.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - Forums
  http://Forum.Skype.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• computer slows down, defragment and clean the registry several times

  With minimal, computer surfing (with Prof'l.) XP) becomes very slow. After registry cleaning and Defrag, computer resumes normal speed. What the source of the problem and the solution? Thanx.

  With minimal, computer surfing (with Prof'l.) XP) becomes very slow. After registry cleaning and Defrag, computer resumes normal speed. What the source of the problem and the solution? Thanx.

  Never use Registry cleaners... they can damage your system if you're not careful or don't know what you're doing!

  using the analysis

  http://www.Malwarebytes.org/ (recommended)

  If you have anti antivirus program update it and run full scan or if you do not get this one:
  AVG Free http://www.avg.com/gb-en/download-free-anti-virus

  Do using the analysis:

  http://www.emsisoft.com/en/software/EEK/ recommended

  You can run it from memory stick too.

  It is recommended to perform all analysis in safe mode.

  Make sure your system is clean first. use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download

  Make sure your windows is uptodate and drivers work correctly and that they are as uptodate.

  Use http://www.javacoolsoftware.com/spywareblaster.html to protect your pc against spyware, adware etc and keep it uptodate then use firefox as your browser

  only use the block announcement more, no script and WOT for safer web browsing for firefox.

  Check your drive for errors

  Try to find which program is the cause of your pc slow boot

  Statement from here

  http://support.Microsoft.com/kb/310353

  Test your windows files

  http://www.bleepingcomputer.com/forums/topic43051.html

  Uninstall programs you do not use!

  Please visit my blog for more tips and tricks
  http://safewordwidewebsurfing.blogspot.co.UK/

• stop 0 x 101: a clock interrupt has not received on a secondary processor within the allotted time interval.

  Hello guys I'm looking through these forums for a long time, but recently this bsod crossed the line: I am so angry and I want to know what the problem is. So I'm going:

  AMD Athlon Dual Core 6400 +.

  Biostar TPower n750

  Corsair 2048 MB 800 mhz

  GeForce 9800GT amp! Edition

  500 GB Maxtor Diamondmax22 hdd sata2

  screen 19' yuraku

  Ttied fi case Ariel (it looks like a beehive with air holes in the world) with a 120 mm fan on the back and another of 40 or 50 mm on the side

  EZ supercool source w 550

  LG dvdwriter, basic keyboard, basic optical mouse (logitech), basic logitech speakers

  Dynamode 11n wireless pci card

  I had installed on this pc WIndows Vista and after 1 year of error I coudnt repair it more.

  I hae errors on Xp before I bought a Vista and now I have installed Windows 7 as a test.

  Unfortunately, I received the error after 2 minutes of play Dark Orbit, the browser game. I noticed usually takes place when I play games the internet Explorer + or sometimes games + winamp.

  I downloaded Windows Dbg and I started to analise errors: the results have been different because of some programs I had installed.

  After reading a few reviews here, I've changed my antivirus AVG and my Ad-Aware malaware spyware Defender.

  After these changes and installing windows 7, the error is like this. I will introduce the last and 4 that I analyzed:

  Error 1

  Loading dump file [C:\Windows\Minidump\120410-23680-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 7 Kernel Version 7600 MP (2 processors) free x 64
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
  Computer name:
  Kernel base = 0xfffff800 '02a5c000 PsLoadedModuleList = 0xfffff800' 02c99e50
  The debugging session: 23:49:17.592 Sam 4 Dec 2010 (UTC + 0:00)
  System Uptime: 0 days 0:17:39.294
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .............................
  Loading user symbols
  Loading unloaded module list
  .....
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Error checking 101, {61, 0, fffff880009ea180, 1}

  Probably caused by: Unknown_Image (ANALYSIS_INCONCLUSIVE)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  CLOCK_WATCHDOG_TIMEOUT (101)
  An expected clock interrupt was not received on a secondary processor in a
  MP system in the meantime allocated. This indicates that the specified
  the processor is hung and not processing interrupts.
  Arguments:
  Arg1: 0000000000000061, Clock interrupt time out interval in nominal graduations.
  Arg2: 0000000000000000, 0.
  Arg3: fffff880009ea180, address the PRCB of the Hung processor.
  Arg4: 0000000000000001, 0.

  Debugging information:
  ------------------

  BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_2_PROC

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: d

  STACK_TEXT:
  fffff800 '03fed938 fffff800' 02a7a443: fffff880 00000000'00000101 00000000'00000061 00000000'00000000 ' 009ea180: nt! KeBugCheckEx
  "fffff800 '03fed940 fffff800' 02ad65f7: fffffa80 00000000' fffff800 ' 00000001 00000000'00002710 fffff880 ' 014de980: nt! : FNODOBFM: 'string' + 0x4e3e
  fffff800 '03fed9d0 fffff800' 02a1d895: fffff800'02 has 42460 fffff800 '03fedb80 fffff800' 02a 42460 00000000 00000000': nt! KeUpdateSystemTime + 0 x 377
  fffff800 '03fedad0 fffff800' 02aca3f3: 00000000 00000000' fffff800 '03fedb01 fffffa80' 025e9f00 00000000 00000001': hal! HalpHpetClockInterrupt + 0x8d
  fffff800 '03fedb00 fffff880' 03d531f2: fffff800 '02adba3a 00000000 00000000' fffffa80' 02dfc868 00000000' 00000000: nt! KiInterruptDispatchNoLock + 0 x 163
  fffff800 '03fedc98 fffff800' 02adba3a: 00000000 00000000' fffffa80 '02dfc868 00000000' ffffd399 00000000' 2e217e22: amdk8! C1Halt + 0x2
  "fffff800 '03fedca0 fffff800' 02ad66cc: fffff800'02c46e80 fffff800 ' 00000000 00000000 00000000' fffff880 ' 00e45f44: nt! PoIdle + 0x53a
  fffff800 '03fedd80 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x2c

  STACK_COMMAND: kb

  SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: Unknown_Module

  Nom_image: Unknown_Image

  DEBUG_FLR_IMAGE_TIMESTAMP: 0

  FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

  BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

  Follow-up: MachineOwner
  ---------

  0: kd > lmvm Unknown_Module
  start end module name

  Error 2
  Loading dump file [C:\Windows\Minidump\120410-26598-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 7 Kernel Version 7600 MP (2 processors) free x 64
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
  Computer name:
  Kernel base = 0xfffff800 '02a 56000 PsLoadedModuleList = 0xfffff800' 02c93e50
  The debugging session: 23:30:52.882 Sam 4 Dec 2010 (UTC + 0:00)
  System Uptime: 0 days 0:04:50.584
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ...............................
  Loading user symbols
  Loading unloaded module list
  ....
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Error checking 101, {61, 0, fffff880009ea180, 1}

  Probably caused by: Unknown_Image (ANALYSIS_INCONCLUSIVE)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  CLOCK_WATCHDOG_TIMEOUT (101)
  An expected clock interrupt was not received on a secondary processor in a
  MP system in the meantime allocated. This indicates that the specified
  the processor is hung and not processing interrupts.
  Arguments:
  Arg1: 0000000000000061, Clock interrupt time out interval in nominal graduations.
  Arg2: 0000000000000000, 0.
  Arg3: fffff880009ea180, address the PRCB of the Hung processor.
  Arg4: 0000000000000001, 0.

  Debugging information:
  ------------------

  BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_2_PROC

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: d

  STACK_TEXT:
  fffff800 '00b9c938 fffff800' 02a 74443: fffff880 00000000'00000101 00000000'00000061 00000000'00000000 ' 009ea180: nt! KeBugCheckEx
  fffff800 '00b9c940 fffff800' 02ad05f7: fffff880 ' fffff800 00000000' 00000001 00000000'00002710 00000000'00000000: nt! : FNODOBFM: 'string' + 0x4e3e
  fffff800 '00b9c9d0 fffff800' 02a 17895: fffff800'02a3c460 fffff800 '00b9cb80 fffff800' 02a3c460 00000000' 00000000: nt! KeUpdateSystemTime + 0 x 377
  "fffff800 '00b9cad0 fffff800' 02ac43f3: 00000000'00000000 00000000'00000001 fffffa80 ' 00000000 fffffa80 ' 031e6450: hal! HalpHpetClockInterrupt + 0x8d
  fffff800 '00b9cb00 fffff880' 03e2a1f2: fffff800 '02ad5a3a 00000000' ffffffed fffffa80 '02d280a8 fffff800' 02c4ec40: nt! KiInterruptDispatchNoLock + 0 x 163
  fffff800 '00b9cc98 fffff800' 02ad5a3a: 00000000' ffffffed fffffa80 '02d280a8 fffff800' 02c4ec40 00000000 00000001': amdk8! C1Halt + 0x2
  "fffff800 '00b9cca0 fffff800' 02ad06cc: fffff800'02c40e80 fffff800 ' 00000000 00000000 00000000' fffff880 ' 03d0f480: nt! PoIdle + 0x53a
  fffff800 '00b9cd80 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x2c

  STACK_COMMAND: kb

  SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: Unknown_Module

  Nom_image: Unknown_Image

  DEBUG_FLR_IMAGE_TIMESTAMP: 0

  FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

  BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

  Follow-up: MachineOwner
  ---------

  0: kd > lmvm Unknown_Module
  start end module name

  Error 3
  Loading dump file [C:\Windows\Minidump\120410-36207-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 7 Kernel Version 7600 MP (2 processors) free x 64
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
  Computer name:
  Kernel base = 0xfffff800 '02a0f000 PsLoadedModuleList = 0xfffff800' 02c4ce50
  The debugging session: 23:25:27.991 Sam 4 Dec 2010 (UTC + 0:00)
  System Uptime: 0 days 2:14:52.692
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..............................
  Loading user symbols
  Loading unloaded module list
  .....
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Error checking 101, {61, 0, fffff880009ea180, 1}

  Probably caused by: Unknown_Image (ANALYSIS_INCONCLUSIVE)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  CLOCK_WATCHDOG_TIMEOUT (101)
  An expected clock interrupt was not received on a secondary processor in a
  MP system in the meantime allocated. This indicates that the specified
  the processor is hung and not processing interrupts.
  Arguments:
  Arg1: 0000000000000061, Clock interrupt time out interval in nominal graduations.
  Arg2: 0000000000000000, 0.
  Arg3: fffff880009ea180, address the PRCB of the Hung processor.
  Arg4: 0000000000000001, 0.

  Debugging information:
  ------------------

  BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_2_PROC

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: d

  STACK_TEXT:
  fffff800 '00b9c938 fffff800' 02a2d443: fffff880 00000000'00000101 00000000'00000061 00000000'00000000 ' 009ea180: nt! KeBugCheckEx
  fffff800 '00b9c940 fffff800' 02a895f7: fffff880 ' fffff800 00000000' 00000001 00000000'00002710 00000000'00000000: nt! : FNODOBFM: 'string' + 0x4e3e
  fffff800 '00b9c9d0 fffff800' 02ff6895: fffff800'0301 b 460 fffff800 '00b9cb80 fffff800' 0301b 460 00000000 00000000': nt! KeUpdateSystemTime + 0 x 377
  "fffff800 '00b9cad0 fffff800' 02a7d3f3: 00000000 ' fffff800 00000202 '02a859fa fffffa80' 01bd6c20 fffff800 ' 02bb42dd: hal! HalpHpetClockInterrupt + 0x8d
  fffff800 '00b9cb00 fffff880' 03fb71f2: fffff800 ' 02a8ea3a 00000000' fffffa80 0000001e ' 02e88398 fffffa80'03122480: nt! KiInterruptDispatchNoLock + 0 x 163
  fffff800 '00b9cc98 fffff800' 02a8ea3a: 00000000' fffffa80 0000001e'02e88398 fffffa80 ' 03122480 fffffa80' 0455 c 410: amdk8! C1Halt + 0x2
  fffff800 '00b9cca0 fffff800' 02a896cc: fffff800'02bf9e80 fffff800 ' 00000000 00000000 00000000' fffff880' 0416 c 480: nt! PoIdle + 0x53a
  fffff800 '00b9cd80 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x2c

  STACK_COMMAND: kb

  SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: Unknown_Module

  Nom_image: Unknown_Image

  DEBUG_FLR_IMAGE_TIMESTAMP: 0

  FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

  BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

  Follow-up: MachineOwner
  ---------

  0: kd > lmvm Unknown_Module
  start end module name

  Error 4

  Loading dump file [C:\Windows\Minidump\120510-17550-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 7 Kernel Version 7600 MP (2 processors) free x 64
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
  Computer name:
  Kernel base = 0xfffff800 '02a 67000 PsLoadedModuleList = 0xfffff800' 02ca4e50
  The debugging session: 00:15:22.449 Sun 5 Dec 2010 (UTC + 0:00)
  System Uptime: 0 days 0:25:01.151
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .............................
  Loading user symbols
  Loading unloaded module list
  .....
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Error checking 101, {61, 0, fffff880009ea180, 1}

  Probably caused by: Unknown_Image (ANALYSIS_INCONCLUSIVE)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  CLOCK_WATCHDOG_TIMEOUT (101)
  An expected clock interrupt was not received on a secondary processor in a
  MP system in the meantime allocated. This indicates that the specified
  the processor is hung and not processing interrupts.
  Arguments:
  Arg1: 0000000000000061, Clock interrupt time out interval in nominal graduations.
  Arg2: 0000000000000000, 0.
  Arg3: fffff880009ea180, address the PRCB of the Hung processor.
  Arg4: 0000000000000001, 0.

  Debugging information:
  ------------------

  BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_2_PROC

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: d

  STACK_TEXT:
  fffff800 '00b9c938 fffff800' 02a 85443: fffff880 00000000'00000101 00000000'00000061 00000000'00000000 ' 009ea180: nt! KeBugCheckEx
  fffff800 '00b9c940 fffff800' 02ae15f7: fffffa80 ' fffff800 00000000' 00000001 00000000'00002710 fffff880'01673837: nt! : FNODOBFM: 'string' + 0x4e3e
  fffff800 '00b9c9d0 fffff800' 02a 28895: fffff800'02a4d460 fffff800 '00b9cb80 fffff800' 02a4d460 fffffa80' 00000000: nt! KeUpdateSystemTime + 0 x 377
  fffff800 '00b9cad0 fffff800' 02ad53f3: 00000000'00000000 00000000'00000001 fffffa80 '00000000 fffffa80' 03265340: hal! HalpHpetClockInterrupt + 0x8d
  fffff800 '00b9cb00 fffff880' 03cb01f2: fffff800 '02ae6a3a 00000000 00000000' fffffa80' 02d9f7e8 00000000' 00000000: nt! KiInterruptDispatchNoLock + 0 x 163
  fffff800 '00b9cc98 fffff800' 02ae6a3a: 00000000 00000000' fffffa80 '02d9f7e8 00000000' ffffd399 00000000' 2d666e22: amdk8! C1Halt + 0x2
  "fffff800 '00b9cca0 fffff800' 02ae16cc: fffff800'02c51e80 fffff800 ' 00000000 00000000 00000000' fffff880 ' 00c0bf44: nt! PoIdle + 0x53a
  fffff800 '00b9cd80 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x2c

  STACK_COMMAND: kb

  SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: Unknown_Module

  Nom_image: Unknown_Image

  DEBUG_FLR_IMAGE_TIMESTAMP: 0

  FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

  BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

  Follow-up: MachineOwner

  Hello

  I suggest you to clear the CMOS and reset the BIOS to default settings. Contact the system manufacturer for assistance.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 purchased, not activated/validated in the allotted time... help?

  Hello! I need to know if there is a way to activate a copy of Windows 7 Professional of after-market facility. My boyfriend bought a laptop about 8 months ago at a friend. His friend has installed a new operating system before selling. Boyfriend is not very gifted in computer science and has not activated within 30 days of activation-registration/product key, because he never uses the laptop. He has paid the initial Windows 7 Professional OS (about $70, as he recollects), but we can talk to the friend, he bought the laptop from the (contracting companies in the Australian Outback), incommunicado. I am now unable to activate/register the Windows 7 operating system and wonder if it is possible to get the OS enabled without having to buy a new OS. I recently bought and installed 2 licenses for Windows OS 8.1 to 2 separate notebooks for me and my son and I would hope to avoid adding another bill of $120 for a new OS installation. Thanks for any help you can offer! ~ Misty Saunders, e-mail - * address email is removed from the privacy *.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us
  http://Windows.Microsoft.com/en-us/Windows/activate-Windows#1TC=Windows-7

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Do not confuse the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  Not used the letters: A, E, I, O you and L S U Z unused numbers: 0 1 to 5

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Stop 0 x 00000101 "an interruption of clock has not received on a secondary processor in the allotted time interval.

  This accident occurs randomly. It is not dependent on temperature, as it happens hot and chilly days. The system does not have hard cpu utilization is about 15%. That seems to only happen when I'm not around and the system runs just fold at home, Kaspersky AV and Windows. ASUS P6T Deluxe, I7-920, 6GB OCZ Platinum, PC Power & Cooling 750 HP, Hauppauge 150 TV Tuner card, Creative Soundblaster X - Fi Titanium, Sapphire 4870. All the drivers are up to date, BIOS, just updated to 1701.  The system is overclocked to BCLK 170 instead of 133. The CPU voltage is 1.2, temperatures run 40-60. I stress tested Pime95 running without problem. I have not found much online that seems to help. I ran the Memtest and Windows memory diagnostics for a few hours each without mistakes to come. Thank you.

  I had this on my lenovo w701 - there ended up being the software power management - I never disabled it and viola no more problems.

• OfficeJet Pro8500 A909a cleans the print heads whenever his touring on!

  Hey elders ~

  Why my Officejet Pro8500 A909a short "Clean printhead" feature every time I turn on my printer?  Is there a place I can tell you to STOP?  It's my expensive WASTE.  Help!

  Hi @eschro

  You turn off the printer when you are not using it and turn it back on, or are you referring to light once it falls in mode 'sleep'? The following presentation may help explain why the print head cleaning is performed each time you turn on the printer.

  The print head nozzles get clogged over time, most commonly by dried ink or microscopic dust particles. Nozzles are kept clean of servicing, including wipe them the surface with a rag rubber, ejecting ink through the nozzles to purge the particles and to prevent drying and pumping with ink to clean the print head. To keep the printer ready to print in color or black, these routines of service generally consume little ink in each cartridge, even if only black or color is used in the document being printed.

  Tiny air bubbles form in ink over time and can block the flow of ink in the printhead long duration printers (IIC). In some printers IIC, bubbles of air can be caused by a change in the ink cartridge. Air bubbles can be removed by pumping them out of the print head. When you remove these air bubbles, little ink is also removed. On the IIC systems, multiple colors may use the same print head. When a single color cartridge is changed, some ink is also consumed since the other color ink cartridges using the same print head. - Source
  

  There is no way to disable this feature, but in General, it is best to leave the printer on and allow to maintain on a regular basis, rather than turning off and back on.

  I hope that answers your question. Happy Friday, have a great weekend.

• Lousy print quality no matter how many times I clean and align the printer.

  I really like this printer, so don't want to give up on this! Then... color printing is fine. Is the black which is ruin. Clean the printheads several times and the report that prints shows the problem... printing of text is faded in task, lack of parts or lines through the text and others. I've lined up the heads and that works great... have replaced the black ink cartridge, but still the same issue.

  Any ideas would be great... we had a paper jam at the time but it is erased, but perhaps it damaged something? Or is it a manual cleaning, I can do that could clarify this?

  THX... ~ Paul

  And so... I continued to clean the print heads, repeatedly... dozen or several times and it finally started getting better little by little. Clean them some more and finally got the head to complete alignment properly. Then I'll call this resolved for now, and there you have it... clean, clean and clean...

• WRT54GL DROPS WAN

  Got a wrt54gl with tomato 1.23. He abandoned the WAN (cable modem) connection when the modem itself abandoned the connection for some reason; However after the modem comes back online and tomato shows in his page with the WAN connection as 'connected', you still cannot browse the internet. I know that the modem is good because if I connect directly to a computer, I CAN browse AND if I get (off ramp exit/Activ) powercycle the router, things return to normal. I can reproduce the problem by feeding and turn on the modem, which turns into exactly the same results, tomato showing the WAN that plugged in, but with the navigation impossible.

  I've been breaking my head about that person, here is some of the things I've tried:

  -With the help of different routers, I have 4 wrt54gl, some more recent that other, newer is fresh out of the box.

  -Clear NVRAM memory, doing resets hard.

  -The WAN connection is DHCP, tried to "trick" the router static IP, but without being able to navigate.

  -Tried checking the ARP tables, routing tables, ifconfig vlan0 downs and UPS (upon entering the router via ssh). Does not work although the paintings look like exactly the same before and after I have to reproduce the problem.

  -Cannot ping the gateway given by DHCP, even though the routing tables show the path to him.

  -Tried iptables f thorugh the console of the router, no nothing.

  -Tried the firmware linksys of origin, with the same results.

  N ' use is not apps torrent or something like that, just good old web navigation.

  Here is the log of routers (to this day).

  May 13 11:59:50 unknown user.info kernel: vlan1: dev_set_allmulti(master, 1)May 13 11:59:50 unknown user.info kernel: vlan1: add 01:00:5e:00:00:09 mcast address to master interfaceMay 13 12:00:07 unknown cron.err crond[109]: time disparity of 20703899 minutes detectedMay 13 13:00:01 unknown syslog.info root: -- MARK --May 13 13:49:54 unknown daemon.info dnsmasq[143]: DHCPREQUEST(br0) 191.142.2.114 00:19:d1:90:38:72 May 13 13:49:54 unknown daemon.info dnsmasq[143]: DHCPACK(br0) 191.142.2.114 00:19:d1:90:38:72 kloneMay 13 14:00:01 unknown syslog.info root: -- MARK --May 13 14:29:51 unknown user.warn kernel: nvram_commit(): initMay 13 14:29:53 unknown user.warn kernel: nvram_commit(): endMay 13 14:29:54 unknown authpriv.info dropbear[85]: premature exit: Terminated by signalMay 13 14:29:55 unknown authpriv.warn dropbear[548]: Failed reading '/etc/dropbear/dropbear_dss_host_key', disabling DSSMay 13 14:29:55 unknown authpriv.info dropbear[551]: Running in backgroundMay 13 15:00:01 unknown syslog.info root: -- MARK --
  

  Modems are:

  Date time Event ID Event level Description 13/05/2009 0:40 1040100 6 TLV-11 - unrecognized OID 13/05/2009 01:52 20000200 3 no response Ranging - T3 time 2009-05-13 01:52 20000300 3 requests from attempts exhausted the 13/05/2009 01:53 20000200 3 no response Ranging - T3 time-out 13/05/2009 01:53 1040100 TLV 6-11 - unknown OID 13/05/2009 05:23 20000200 3 no response Ranging - T3 time-out 13/05/2009 05:23 20000300 3 attempts of applications ranging exhausted the 13. 05/2009 05:23 20000200 3 no Ranging response received - T3 time-out 13/05/2009 05:23 1040100 6 TLV-11 - unknown OID 13/05/2009 09:47 20000200 3 no response Ranging - T3 time-out 13/05/2009 09:47 20000300 3 requests from attempts exhausted the 13/05/2009 09:49 20000200 3 no response Ranging - T3 time-out 13/05/2009 09:49 13000401 5 ToD request sent - no reply received on 13/05/2009 09:49 1040100 6 TLV-11 - OID unknown 13. 05/2009-11:22 20000200 3 No. response received - T3 deadline 2009-05-13 11:22 20000300 3 attempts of applications ranging exhausted 2009-05-13 11:24 20000200 3 no response Ranging - T3 time-out 13/05/2009 11:24 13000401 5 ToD request sent - no reply received on 05/13/2009 11:24 1040100 TLV 6-11 - unknown OID 13/05/2009 15:05 20000200 3 no Ranging - T3 time-out response

  Now I have reduced to problems of communication between the modem and the router WHEN the modem disconnects, for some reason, worth mentioning that I CAN see the modem from the local network by going to its web interface, I can't use internet.

  Please help me on this one.

  Yes, Googling, it (and agree with you) I found that there is a timing issue with this SPECIFIC router, but it is not more than that.

  In any case, I found a solution to:

  http://victek.is-a-geek.com/REPOSITORIOS/Linksys/firmware/tomato/scripts/

  I used the script gateway2 to basically restart the wan (instead of the router itself) when the gateway does not respond to the ping command. I put this in a chron job every minute. It works, but it's not elegant.

  Well, I hope that the most recent routers do not have this problem. I'm waiting for 802.11n to get out (like not really rough). I hope that will be promptly accompanied by openwrt or tomato.

  Out of the object, if the sync problem is hardware related (because I guess it is) how could it not be fixed with open firmware? These 54 were long enough.

• Routers changed; How to reconnect time capsule

  Changed to Earthlink DSL to AT & T u-verse fiber and time capsule airport is no longer back up; AT & T set new router; I want to use only the Time Machine backup. What I have to do a hard reset of time capsule? Is there an easier way to reconnect with my iMac? I have now connected time capsule directly in my iMac, but still no recognition. Thank you.

  Whenever you change the modem or modem/router, or change service provider, the time Capsule airport must be reset to the default settings and then set it up again to work on the "new" network

  A hard reset on the Time Capsule will achieve this goal. Then, make sure that the Ethernet cable connects from one of the four <>- on the Uverse router/modem LAN ports to the "O" on the Time Capsule WAN port.

  Set up the time Capsule still... you can use the same name and password if you want, or set up a new name and password if you wish.