Click hidden objects

Similar Questions

• Shows in the preview hidden object game

  I have an object in the timeline that is hidden (X in the column of the eye). When I preview the slide, the hidden object is visible. Is there a way to get an overview without seeing the hidden objects?

  Hi Jay

  It is a normal behavior. When you hide things in the timeline panel, you are only hiding YOUR view as an author of Captivate. This allows you to get in the way temporarily while you work on other objects.

  For example, you have maybe five legends that appear all in the same location, but at different times. So, you want to hide all but one you are interested in when editing.

  It seems, based on what you posted that you expect the feature also hide the object during playback. That won't happen in general. However, if you really don't want to hide it during playback, and you have Captivate 4, they have added a new feature to the properties. It is located under the Options tab and is labelled "Visible."

  

  See you soon... Rick

  Click here for Adobe Certified Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks

• Double-click the object of front panel to find the terminal block diagram

  Hello world. I don't know why, if I double click on an object to front panel, labview opens the front tab customize, instead of finding control in block diagrams, which would be the normal behavior, as I read in http://labviewwiki.org/Tips_and_tricks#Debugging.

  I tried to reset the initial Setup by renaming the file LabVIEW.ini, but it doesn't seem to work.

  Do you know how double-click the object on the front panel and locate the?

  Thanks in advance!

  Guille.

  Did you restart LabVIEW after you rename the file labview.ini?

  There is an option (Tools... options...... general façade... 'Open the editor control with double click').

  It always seems to be set in your case.

• I can't scroll screen in hidden object games

  I bought a small laptop and I can't scroll vertically all playing hidden object games most of them rendered unplayable. Usually the screen would scroll upwards or downwards when I moved the cursor to the top or the bottom of the screen, but with this laptop (Samsung N110), the screen stays fixed.

  Hello

  Increase the resolution of the screen and check if it works.

  You can also change the hardware acceleration of different level and check.

  Check out the link:

  http://support.Microsoft.com/kb/263039

  If nothing helps, perform the clean boot.

  Here is the link:

  http://support.Microsoft.com/kb/929135

  Kind regards

  Bourso.

• By clicking on objects to pick them up. Need help please

  Hello

  Following my other thread: http://forums.adobe.com/thread/775468?tstart=0

  I'm trying to find how to make my game so that if you click on objects you can pick up. That is, click and hold the mouse on an object it will seek, move the mouse will be to follow the mouse, release the mouse will drop the object.

  I use the Havok xtra.

  That's what I have right now:

  -Created the field, a box and a character.

  -Do the arrows move the character forward, backward and turn left and right

  -The camera made a child of the character

  Then I put in place the Havok Physics:

  -Created a piece of media physical scene Havok.

  -Apply a physical behavior of Havok (No. HKE) in the 3D world.

  -Make the box a removable rigid body and the gound a rigid body fixed as follows:

  -installation havok (box)

  pHavok = member ("EmptyHavok")

  pHavok.gravity = vector (0, 0, -300)

  pBox.addModifier (#meshdeform)

  pHavok.makeMovableRigidBody (pBox.name, 1000.0, true, #box)

  -installation havok (ground)

  pHavok = member ("EmptyHavok")

  pHavok.gravity = vector (0, 0, -300)

  pPlane.addModifier (#meshdeform)

  pHavok.makeFixedRigidBody (pPlane.name, true, #box)

  Physical work, now I need a way to click on the box to pick it up.

  What I want to do is exactly the same as in this tutorial: http://www.deansdirectortutorials.com/3D/Havok/

  You can see the result here: http://www.deansdirectortutorials.com/3D/Havok/tutFiles/3DobjectsImportedHKE.dir

  But I use objects created Director and no. HKE. I can't make it work, when I try to apply the behavior of the mouse down it won't let me (no idea why?)

  Can I use the code inside the mouse to the bottom of behavior to do this?

  Need some advice please. Any help is very appreciated.

  The type of error you describe is revealing a list of incorrect model (all items in the list must be valid models in the 3D world).

  If pBoxHitBox1 and pBoxHitBox2 refer to models (rather than strings), all you need is:

  tModelList = [pBoxHitBox1, pBoxHitBox2]

• Problem with the display of help on hidden objects

  Hello.

  I started the conversion of an application to make use of the universal theme. The way I did is create a new system of menu navigation from this part of zero with the universal theme.

  I loaded my old 4.1.0.00.3 application in my workspace and began to copy pages in my new app. The problem that I am facing is bound to the elements of the region that appear under certain conditions. When the items are hidden, the help icon is (surrounded by a circle point of mark) still visible, stand-alone meeting in the middle of the region. If you click on it it displays help for a field that is not visible:

  

  So as you can see, there's a widget of self-help on the right side below the item earlier in the day.

  I use the product Application Express Build 5.0.2.00.07

  All advice appreciated.

  Thank you

  Clive.

  Hello. Thank you. I ended up remove and re-create the item that did the trick.

  I'm guessing that he in some way I messed up migrate objects from 4.1 to 5.

• Triggered by a selection of hidden objects

  How do hide you an object that is seen only when triggered by the selection of another object?  Which means, if I click on the checkbox, then only I see the fields to enter an address?  But if the box is never verified, then this address field is never visible.

  Ah, I see.  My script was using the Javascript syntax.  One option is to modify the scripts of language in the drop down in the JavaScript script editor, which will fix your syntax error.

  Or you can use the script below equivalent which is updated for FormCalc

  If ($.rawValue == '1') then

  TextField10.presence = "visible".

  on the other

  TextField10.presence = "hidden".

  endif

  They are different languages with different syntax.  FormCalc the equivalent of 'this' is ' $'.  Also, you will notice the syntax 'if' requires the keyword "do" and requires closing "endif" keyword as well.

  that should fix things.

  Scott

• Right-click menu objects

  Hello.. I had a problem with the context menu, creating graphic objects that remain in Office until another window passes over it.

  This only happens when the browser window is not available to the bottom of the screen. If I call the menu at the bottom of the browser, and the menu fills down from my position of the mouse, then no matter what part of the menu that extends below the browser window, will be visible... until I have spend another window on the desktop area.

  It does not affect performance, but in 20 minutes of work, the bottom of my desk looks like a collage of context menu.

  Is this just right click in Firefox, or right-click in the whole of Windows? If the latter, I've seen before, and it is either a problem with your graphics driver or with Windows itself. Try updating your graphic driver, update your drivers graphics to use hardware acceleration and WebGL

• Strong occasional roar of the hidden object games.

  HP Pavilion p6310f

  Windows 7

  For several months my computer has been sometimes emitting a hum loud noise (like a plane, limit the taken off!) while playing the game of objects hidden games. The newest game it took place is dark features: the sins of the father. The roar of noise only last about 5 seconds, 10 MAX I tried the source, but could not. Only happens when you play these games, but not always. Have checked with HWmonitor and time, temperatures are OK. Also, run Diagnostics of HP hardware that has not found any problems. What can be? I guess THAT fan?

  Cpu fan has changed, much better.

• Using Windows Live Mail. Screen reads, "some items can be hidden because a view is applied. How to access the hidden objects?

  Using Windows Live Mail.  My incoming screen is empty.  There is a message stating: "some items can be hidden because a view is applied.  How can I check to see if there are objects hidden and, if so, what they are?

  It depends on what version of the program that you use, but the key word is seen. In all versions, there are display orders; in 2009, WLMail, they are in the menu display . WLMail 2011, they tape everything what they own. In all versions, press Alt + V to display the available commands. Search, display or hide the options (to hide messages you have already read, for example) or a filter (for filtering messages read, for example).

  Windows Live Mail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page. You are probably asked to give your version of WLMail and Windows so that the answer may be more accurate.

  • In WLMail to find your version of the software, a press on ALT - H. If it doesn't show you the version and the build number, press on escape to two times, and then Alt - F B.
  • To find your version of Windows, type winver in the start search box and press enter.

  Noel

• Photoshop feature suggestion: turn off hidden object selection

  When you use the direct selection and drag to select multiple items, Adobe should only have select visible elements, especially when it comes to hidden items. It adds unnecessary steps to have to go up and deselect a hidden layer where the image falls outside the masked area.

  Example: I have several layers of text and rectangles and a picture hidden above all. The image itself is much larger than the masked area, but I can't. However, if I do drag and select multiple items, the area of the image outside the mask is selected if she rides one of the objects.

  I find it very inefficient and counterproductive. The direct Selection tool makes everything easy to handle, except that the hiccups.

  In addition, the layers that are cut to another, like a solid color adjustment cut on a text layer, layer should be selected by default when the two layers are higher in the layers panel, and you're not to select a mask. I noticed that this happens a bit in my workflow when I enabled automatic selection (which I use 99.9% of the time). It always catches me off guard when I select an object and I find myself by selecting an adjustment layer that is not yet hidden to a particular item.

  Please update to Photoshop in the last update for 2015.5.1

  Reference: Photoshop CC 2015.5.1 update now available

  Thank you

  Mohit

• Passing Hidden object visible

  Hi guys,.

  Currently of hard to get items that I've marked as hidden (out of the layout) to become visible. At this point, I'm trying to get different objects to become visible depending on which radio box they select. I tried to add the Javascript for one of the boxes of radio as follows:

  if (form.main.status1.sessionwaitlisted.rawValue == 2)

  {

  Form.main.email.Presence = 'visible';

  }

  This has failed permanently... And since then, I download the latest version of the labour code, where I can choose to add an action according to the screenshot...

  

  However, I am still unable to get the action work when I'm in preview mode. I have no results...

  

  Any help would be greatly appreciated.

  Hi melo.

  Since I couldn't see the field 'email' on the form, I cannot say if there is a problem with the script that you used.

  But please try to use the following script to the place:

  xfa.resolveNode("form.main...email").presence = ' visible';

  Additionally, make sure that you hide on the subform that the subject of the e-mail message in it.

  Thank you

  Kumar

• How to click on object and then uncheck this onbject then click another object?

  I build a simple game in which you must click on a box to activate it, meaning when you click on it, you have control of his movement. Then, I want to be able to click on the square again so that you don't have control of it, and then you can click on another object in the game. What is the code to enable this? I think that its an eventListener for a mouse event.

  By clicking on any way is to assign an event listener for the CLICK event, as in...

  yourSquare.addEventListener (MouseEvent.CLICK, manageControl);

  which bth in the name of the place that I used (yourSquare) and the name of the event handler (manageControl) function are named however you want they named.  The real work is done in the case of handler function...

  function manageControl(evt:MouseEvent):void {}

  It's where he's going in your code to determine if the place was clicked at the top compared to relinquish control of control.

  }

• Windows Recovery eliminated virus and recovered office, now back in the office hidden objects

  Hello

  I removed the Malware from Windows of a customers machine and then fixed recovery problems that caused removal regarding masking of the files linked on the desktop and programs.

  It was successful and the machine is free of Virus/Malware
  All this happened early last week.
  On Friday of last week the customer called me to say he had intermittent problems where the machine would start sometimes and sometimes wouldn't.
  Start fail meant it would go beyond the Welcome screen, but the Office would hang until he could use the machine, and then he could exercise a strong offshore and restart.

  I made a visit, and as usual with intermittent problems the machine showed no defects.
  I ran HiJackThis and could not see anything in the paper that pointed to more malware.

  Today the customer asked me to watch the machine he was not starting properly.

  What is happening now is the machine starts, gets past the opening screen, plays the startup sound and displays its normal wallpaper.
  However, there are no icons on the desktop and the taskbar is non-existent. Make a right click on the desktop will not bring a menu, and if I plug a USB it does not show one menu AutoPlay.
  The screensaver comes in after 10 minutes I thought it should and the task manager can be started with Ctrl-Alt-Delete.
  If I boot safe mode all I get is a black screen with notifications of Mode without fail to every corner of the screen and nothing else.

  Outside of the machine is not not usable it tells me that the machine correctly but does not show what it should.
  Can someone let me know what is the best way to go from here.

  I have supported Linux systems for three years so a command line is not a problem.

  Ah, the operating system is Windows XP Home SP2 (sorry)

  Mike

  If your customer has used the power button, the system of NT (NTFS) files may be slightly damaged.

  You must first run a chkdsk/r of a real installation of XP bootable XP Recovery Console or a bootable XP Recovery Console CD you can do (no XP media required) and be sure the file system is clean.

  Since you are able to get into the Task Manager, take a look at the processes tab to see if explorer.exe is running.

  If explorer.exe does NOT work, this is the reason why your office is (probably) just to show a background image.  The explorer.exe IS your way.  If explorer.exe is not running, all you will see is the background image.

  If explorer.exe does not work, see if you can start it manually as follows:

  In Task Manager, click file, new task, and in the Open box, enter:

  %windir%\explorer.exe

  Click OK and see if get you your office.  Of course explorer.exe must always be running.  If this isn't the case, you need to understand what the problem is and fix it.

  If you have removed the malware, what applications did you use?

  I would recommend this at some point:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Cannot use a format on hidden object mask?

  Version 4.1.1
  
  Hello
  
  For regular reporting, we can open any column and update the espcially mask to format for numbers with no problems. Now, I also have an HTML region where I show the value of an element of page hidden to help & P1_ITEM. Now I wanted to format the item, its a numeric field. So I opened the hidden item and entered in the format mask, however, it doesn't seem to work.
  
  Ideas or suggestions please?
  
  Thank you
  Ryan

  You can opt for the calculation calculation elements post parameter:

  Enter a SQL or PL/SQL expression or a PL/SQL '' function; to refine the value of the element.

  For example, if this element is named P1_X, you can use post of expressions calculation such as UPPER(:P1_X), INITCAP(:P2_Y), MIN(:P1_X,:P2_Y-200), NVL(:P1_X,:P2_Y), or a function like my_func(:P1_X) call; to set the final value of the question.
  Note that these examples show expressions can refer to the current element, or they can refer to any other item in session state.