ClickPad help - issues with cursor

Similar Questions

• issues with cursor

  My cursor has decided to change the usual standard to cross and even though I have an appointment in the preferences and change again, it remains on the cross.  Any suggestions?  (another getting used to her that way, lol)

  CAPS LOCK is on?

• I have a black screen with cursor before logon for Windows 7, 32-bit. Help, please.

  Tried to start in safe mode & start the laptop very well, but once I went back to the startup by default, face the same problem again.

  Hello

  Take a look at this thread and follow the same steps listed in the breast.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-7-boots-to-black-screen-with-cursor-before/531df029-0dac-4392-9efe-1d35714cf136

  In particular, the bit on a SFC/scannow. Sometimes when you unplug a PC like that, you can damage some essential Windows files. A SFC scan should be able to fix it.

  This link contains a lot of other really good as well troubleshooting procedures.

  I hope this helps.

• Are there known issues with the help of Dreamweaver CS6 on Yosemite?

  Are there known issues with the help of Dreamweaver CS6 on Yosemite? I am considering an upgrade of the Mavericks.

  I don't think so I am still using DWCS4 on Yosemite and it runs like a dream, so I think that DWCS6 would be.

• Insert the record of one table to another with the help of the cursor

  Help, please!
  
  the tables are - 1. countries (country_id pk, country_name, region_id)
  2A (country_id, country_name, region_id)
  table data are
  1 to 1
  2 b 2
  3 C 3
  NULL d 4
  5 e 5
  6 f 6
  7 g 7
  -----------------------
  Insert the record in the table a country table with the help of the cursor, insert all the non-null records.
  This procedure does not correct result
  -----------------------
  
  create or replace
  Amit procedure as
  cursor c1 is select * from a;
  RW a % rowtype;
  Start
  Open c1;
  Fetch c1 into rw.
  While (C1% found)
  loop
  insert into countries values (rw.country_id, rw.country_name, rw.region_id);
  commit;
  Fetch c1 into rw.
  If rw.country_id is null then
  Fetch c1 into rw.
  end if;
  end loop;
  Close c1;
  exception
  while others then
  dbms_output.put_line ('exception = name ' |) RW.country_name);
  end;

  You don't need cursor at all;

  create or replace procedure amit as
  
  begin
    insert into countries (Country_ID, Country_Name, Region_ID)
    (select a.Country_ID
           ,a.Country_Name
           ,a.Region_ID
     from a
    );
  
    dbms_output.put_line('Rows inserted : ' || sql%rowcount);
  
    commit;
  
  end;
  /
  

• Please help me with the issue of the image

  Hello

  I need to create a report of error log which two same named images overlapped together.

  

  The image above shows how is my page indesign file. I need the report as error log:

  With overlapping of images: photo_sample3.jpg

  Logic:

  I don't know what logic I need to use to get there. But with my knowledge, I thought, I can use the image name and the value of geometric image to achieve. I found a script that gives the number duplication, if any of this page in this page of this forum.

  var overlapArray = new Array();  
  var myPages = app.activeDocument.pages.everyItem().getElements();  
    
  for(i=0; i<myPages.length; i++)  
  {  
      var myPgItems = myPages[i].allPageItems;  
      for(k=0; k<myPgItems.length; k++)  
      {  
       var bounds1 = myPgItems[k].geometricBounds;  
              for(j=0; j<myPgItems.length; j++)  
                   {  
                     var bounds2 = myPgItems[j].geometricBounds;  
                       if(k==j)  
                       {  
                           continue;  
                       }  
                      var temp = touches(bounds1, bounds2);                     
                      if(temp == true)  
                      {  
                          overlapArray.push(myPages[i].name)  
                      }  
               }  
           }  
   }  
  alert("overlap Pages: "+overlapArray);  
    
  function touches(bounds1, bounds2)  
  {  
  if (bounds1[2] < bounds2[0]) return false;  
  if (bounds1[0] > bounds2[2]) return false;  
  if (bounds1[1] > bounds2[3]) return false;  
  if (bounds1[3] < bounds2[1]) return false;  
    return true;  
  }   
  

  Please help me with script or logic.

  Thank you in advance,

  Kitty

  Hi well,.

  all was needed was a line of code

  Array.prototype.intersect = function ( coordinates ) {
      var n = this.length;
      var nY1, nX1, nY2, nX2;
      var y1 = coordinates[0];
      var x1 = coordinates[1];
      var y2 = coordinates[2];
      var x2 = coordinates[3];
  
      while ( n-- ) {
          nY1 = this[n][0];
          nX1 = this[n][1];
          nY2 = this[n][2];
          nX2 = this[n][3];
  
          if (
              (
                  ( y1>=nY1 && y1<=nY2 )
                  &&
                  (x1>=nX1 && x1<=nX2 )
              )
  
              ||
  
              (
                  ( y2>=nY1 && y2<=nY2 )
                  &&
                  (x2>=nX1 && x2<=nX2 )
              )
  
          ){
              return true;
          }
      }
  
      return false;
  }
  function reportOverlaps() {
      var doc,gs, g, n, o = {}, p, pg, pb, lk, lkn, overlaps = [];
  
      if (!app.documents.length) return;
  
      doc = app.activeDocument;
  
      gs = doc.allGraphics;
  
      n = gs.length;
  
      while ( n-- ) {
          g = gs[n];
          p = g.parent;
          pg = p.properties.parentPage;
          if ( pg instanceof Page ) {
              pb = p.visibleBounds;
  
              lk = g.itemLink;
              lkn = lk.name;
  
              if ( !o[pg.name] ) {
                  o[pg.name] = o[pg.name] || {};
              }
  
              if ( !o[pg.name][lkn] ) {
                  o[pg.name][lkn] = o[pg.name][lkn] || [];
                  o[pg.name][lkn][ o[pg.name][lkn].length ] = pb;
              }
              else {
                  var intersect = o[pg.name][lkn].intersect ( pb );
                  intersect && overlaps[ overlaps.length ] = "Pg:"+pg.name+"//"+lkn;
                  o[pg.name][lkn][ o[pg.name][lkn].length ] = pb;
              }
          }
      }
  
      alert( overlaps.length? "Following overlaps where found:\r"+overlaps.join('\r' ) : "No overlaps found" );
  }
  
  reportOverlaps();
  

  Loïc

  www.ozalto.com

• Two issues with LR that I could use help with

  I'm on my first day of using LR and there are two questions that I could use help with:

  1. I can't replace the files when you move one place to the other.  I have a working directory, and now that I'm done I want to move the files finish to my disk archive.  Raw files are already on the archives, so when I try to move them I get an error that the files already exist.  How can I force a crash of in LR?

  2. I have directories where there are pictures which are a set of raw, psd and jpg files.  When I open the directory the raw and jpg are combined so that only the raw and psd files are appearing as separate files.  I would like to keep the jpg file in a separate so file and do not appear as part of the raw file.  When I open the directory in windows Explorer, they appear as three separate files.

  I appreciate your time to help me with these two fundamental questions.

  1. I'm not sure what the problem is here. What operating system do you use?

  2. in your Lightroom preferences, there is an option to treat JPEG files next to raw as separate files images. You must make sure that the option is checked. After you have done this, I think that you must synchronize the folder for the images that you have already imported. Next time you import JPEG files will be displayed separately.

• Help with cursors... shortcuts?

  Hi people.   My eyes are tired in my old age.

  I work with cursors, under presence, clarity, Vibrance, Saturation (LR3), and it is a real problem for me to get this slider to zero value.  I continue to not half dozen at-1 or + 1, etc.  Y at - it a shortcut by which I can just put the numerical value in manually for the sliders?

  Thank you all in advance for any response.

  A double click on a slider will put it to zero.

  You can click on the number, and then type the number you want.

  Victoria Bampton, the Lightroom Queen, has a Web site with a downloadable list free of all known Lightroom keyboard shortcuts, which some will move sliders in different increments. Google his name for more information.

  HAL

• Windows 7 Pro black screen with cursor on all modes and no login screen

  OK so basically, it's how, my laptop decided to me-screw right when I need to make some adjustments to my final project for next week.

  Friday he started very well in class and at the end of the course at 6:30, I stopped him. I normally don't that often stopped because I usually find myself opening upward in an hour later. But I did this time and when I got home and turned on around 9:00, it started like this:

  Screen Compaq PhoenixBIOS > Windows boot animation > black screen with cursor mobile, no login screen

  No screen connection. No sound. Not nothing but a black screen and the cursor movement. So I force shutdown and turned it back, this time he asked a chkdsk and I ran it. A ton of stuff file unreadable came and it took all night to run through it all. Tried to start again and Windows Error Recovery came and I tried all Modes of security and start normally and all produce the same black screen and the cursor with no login screen.

  Then I used my Windows 7 dvd repair to try and system restore to a week before. That's where I noticed that windows had installed a critical update at 12:00 on Friday. Tried to restore before that, but he failed. Gave me an error 0 x 80070057 and said I should run chkdsk /r and then try again. Then I used the cmd prompt through dvd repair and he has seen all these things wrong file again once recovered things then realized hours later. Tried to restore the system again. Still the same error. A run chkdsk again through the cmd prompt, then he went to clean without errors or orphaned files or anything, but it took a lot of time. I used the Startup Repair, and he has not found anything wrong either. But still the same error the system restore.

  So I looked around online for the last two days, trying to figure out and that someone said to try CTRL + Alt + Delete, the sticky shift key thing. So I tried to boot the system again, same black screen with cursor movement. I did CTRL + Alt + Delete, nothing. Press and hold the SHIFT key, and a pop-up window asked FilterKeys. Press the SHIFT key 5 times, a popup asked about sticky keys. But that's all I can get it to do. Nothing else. I tried to boot into safe mode with F8, chose, each of them and that changes in screen resolution and the words "safe mode" in all the corners of the screen. If the repair dvd's while I start in safe mode, it will open as well in safe mode, but with the same black background mode. Tried running sfc/scannow through repair invites cmd of the dvd and it says a system repair is pending and he had to restart, and then run the sfc/scannow. Tried, but it doesn't do anything when I restart except go to Windows Error Recovery asking either start in any safe mode or normally. And then it's just black screen again.

  So I am at a complete loss what to do now. After all of this mess, it seems that this Windows Update Friday afternoon did something and when I booted it upward once again, his cause nothing but problems. I think it has something to do with the display and the graphics card drivers? It's as if the thing starts but I do not see anything either because the sticky keys appears, but sees nothing else, no matter what I do. Seriously, I don't want to this junk because this is a new hard drive and I was just able to retrieve my files from my old hard drive that had epic failures as well. And I just got this new specifications I wanted as well.

  Laptop Spec:

  Compaq CQ50-115nr
  OS: Windows 7 Professional
  HARD drive: Western Digital Scorpio Blue 320 GB SATA WD3200BEVT
  Processor: AMD Turion X 2 RM-70
  Graphics card: NVIDIA GeForce 8200 M G
  Memory: 3 GB RAM

  If someone could seriously help me I would be VERY happy.

  Hello

  This isn't good news.

  --------------------

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not try to repair it, you can borrow a friends because they are not protected against copying. You can also buy the physical disks
  good system machine cheap that you already own Windows (you have to reinstall them if)
  required). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Black screen with cursor, no login screen; Windows 7 Home Premium 32-bit

  Hi all

  I have a Dell Inspiron 1501 running Win7 Home Premium 32 - bit with IE9. It worked perfectly fine for over a year. The last update listed in the system restore was on 23/04/2011. He installed the Windows updates.

  My husband used the computer very well the next morning. When I tried to start the computer, it wouldn't so I thought that maybe the battery should be charged. I plugged it in and nothing helped. The load button wouldn't even nothing worked at all. I bought a new battery and it came yesterday. I changed the batteries and let one over new-completely. I then tried to start the computer and he did something I could not do in months... He ran the disk check.

  The disk check lasted almost 2 hours. He wouldn't let me cancel it either. He said (from the pieces that I could see) that system files have been moved, a ton of them said that they have been replaced, others have been removed, and some have been updated. I knew not what do when it restarted because it did it is normal startup, showed at the Windows startup screen and then when I thought he was going to the login screen, it became black and only the cursor has been visible and moving.

  I restarted again and this time the display of incorrect closing came. I tried all the options - normal mode, safe mode safe mode w/networking and safe mode w/prompt - all results were the same. Then I tried using the recovery tool to fix the problem. Startup Repair showed no problem, System Restore showed either deleted or corrupted files and I ran Windows Memory Diagnostic and it showed no problems. I even ran the Diagnostic tool in the start menu.

  I think that chkdsk deleted my files of Windows, but I don't know how to get back them. I have the OS disk and tried to use the repair feature, but nothing yet. Also, I had to ask my husband did it to my laptop and he answered nothing. So I had to be more specific, and his answer to my questions were: ' I didn't download anything "and" I just closed the laptop, I never disconnected or shut it down. I guess that's the reason for the battery works not properly the next day.

  If someone could help me with this, I would be very grateful.

  Hello

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  References to Vista also apply to Windows 7.

  No registration necessary data and re - install Windows 7 might be the best
  the option but here are some others.

  You can save your files by putting the drive in another computer or a
  drive enclosure external hard and then save the. Do this using several
  methods to redundantly. Of course a real computer store or
  the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - Device Manager - Display Adapter - Double
  Click on - driver tab - click on UPDATE driver - then right-click on
  Devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in two regular windows
  and Safe Mode) is to CTRL + ALT + DEL - Manager tasks and the
  Processes tab find EXPLORER.exe and END PROCESS on it-
  then on the Applications tab - lower right kind - new task - in
  EXPLORER.exe. Safe Mode is available by pressing F8 repeatedly
  you the trunk upwards. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not come back
  on this subject.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Screen black issues are extremely difficult to repair and to any fix is
  usually on a hit or miss basis. There is no information on a black background
  screen as it is on a blue screen just adds to the difficulty. Often
  using a restore point or Startup Repair will have no effect.

  You can try a google to see the proposed repairs, some of which have
  works however these cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a window 7 disk? You can try restoring the system to it.
  If you don't have the disks from your system manufacturer will sell them at low prices.
  Or try in safe mode if you can get there.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can create a recovery disc or someone else use same version
  (restoring the system only to be bootable).

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ------------------------------------------------

  These require good Windows 7 drives (especially if you can't
  boot mode safe).

  Try the Startup Repair tool-

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  Try Repair Options recovery or a Windows 7 boot disk system

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  'Windows 7' black screen - check that a 1st
  http://www.google.com/search?hl=en&source=hp&q=vista+black+screen&aq=f&oq=&aqi=g10#hl=en&sclient=psy-ab&q=%22Windows+7%22+black+screen&oq=%22Windows+7%22+black+screen&gs_l=serp.3..0l2j0i7j0.11061.20608.0.21138.19.13.1.0.0.4.874.5490.2-2j4j5j1j1.13.0.les%3B..0.0...1c.1.5fPLvNo9C0U&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=4624fb5637e33ac3&bpcl=35466521&biw=1024&bih=731

  Black screen solution "Windows 7".
  http://www.google.com/search?hl=en&q=vista+black+screen+solution&aq=f&oq=&aqi#hl=en&sclient=psy-ab&q=%22Windows+7%22+black+screen+solution&oq=%22Windows+7%22+black+screen+solution&gs_l=serp.3..0j0i8i30l3.83803.88983.0.89342.18.9.2.0.0.4.1950.6210.0j1j1j2j2j7-2j1.9.0.les%3B..1.0...1c.1.DJgtecu85jA&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=4624fb5637e33ac3&bpcl=35466521&biw=1024&bih=731

  Fix black screen "Windows 7".
  http://www.google.com/search?hl=en&q=vista+black+screen+fix&aq=f&oq=&aqi#hl=en&sclient=psy-ab&q=%22Windows+7%22+black+screen+fix&oq=%22Windows+7%22+black+screen+fix&gs_l=serp.12..0j0i7l3.112960.116439.0.118669.13.5.1.0.0.3.1809.5242.2-1j5-1j0j2j1.5.0.les%3B..0.0...1c.1.K18bh3X267U&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=4624fb5637e33ac3&bpcl=35466521&biw=1024&bih=731

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  If nothing works, you can do a repair installation.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, to
  a type of Windows 7 boot disk: (type a line or copy and paste a line)
  at the time and hit enter - enter a parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  =================================================================

  These help in some cases:

  There are backups in the folder C:\Windows\System32\Config\Regback.

  These methods replace the registry with a backup.

  Start with a Windows 7 disc. Both the complete following restoration
  a backup of the registry.

  How do I recover from a corrupted registry that prevents Windows XP
  startup ( Vista and Windows 7 also using the instructions in the manual)
  http://support.Microsoft.com/kb/307545/

  Check this thread - you can use the command to a startup or recovery disk prompt.
  (It's Vista and Windows 7 is the same)

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/55f98088-0fc3-4371-A005-d95a457d9de6

  ========================================

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  If you need to repair disks - these help repair Windows not re-install.
  Often these records will help when the OEM recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs. (It can be done on any computer running XP,
  Vista or Windows 7 which has a CD/DVD burner).
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How create a Windows 7 system - free repair disc (must be made on a
  Windows 7 computer running the same 32-bit or 64-bit).
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  An installation disc is possible also to use for repair. Of course you would
  Use your own COST (product key).

  How to: What are my options for Windows 7 reinstall media?
  

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

  See MVP Andre Da Costa message in this thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-can-i-download-gatewaywindows7recovery-disc/3c0ecd74-CFC1-4188-89c7-a6bbe8113ee1

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Huawei P9 - I have many issues with getting my pictures from the phone to my Imac

  Huawei P9 - I have many issues with getting my pictures from the phone to iphoto on my Mac.

  Before the summer I bought a Huawei P9 phone, I can easily see the photos on the phone - I can't just them on my mac.  When I connect via a USB cable, it refuses my permissions.

  I try to use my Google account to view on the Mac and move the iPhoto - I can't work either! I can see them, I can't move them!

  I'm pulling my hair out and I have enough to do with! Help, please...

  Jim Hosking

  You need the phone provider support - there is a problem with the way their phone works and how to use it and has nothing to do with the Photos or iPhoto - if pictures is consistent with standards of good Photos and iPhoto won't work with it

  You may need special third party software for your phone load in Photos or iPhoto

  LN

• 16.0.2 Firefox is not compatible with the zone alarm Forcefield AGAIN. Please, help users with that. No current positions

  Before I updated to the current version, I checked for "reserves" and found nothing to indicate that the Zone Alarm Extreme Security, ForceField was not compatible with the Version 16.0.2. If I had known that I would not have updated. Y at - it no use for those of us who have this problem. ? The only post I noticed on this problem is 'closed' and dated about 8 months ago.

  Thanks for the reply, the old Fox!

  I agree with you 100%. This occurred without fault to each new update of Firefox.

  I wish that Firefox had warned users of the incompatibility issues with ZA ForceField, as they have done with other problems before users downloading the latest version of Firefox.

  Thank you also for the link to the "release notes", which I didn't have before. It is a help in the future.

  Warm greetings,

      Boudica
  

• iMac 27 "with the second monitor boots black with cursor

  I can't seem to find another discussion altogether as my problem starting special 'black screen ':

  New iMac 27 "retina 5K (end of 2015) running OS X El Capitan 10.11.3 with second monitor Samsung connected by Mini DP - DVI.  When starting, the two screens are displayed in black, but the cursor is available and can be moved.

  I have to make a hard stop and disconnect the second monitor to start at the login screen. Then I can reconnect the monitor and everything works.

  Any suggestions for a fix?

  So, I spent some time with Apple customer support. Several of the standard troubleshooting for problems of mystery, they came to the conclusion that there was an incompatibility of driver with the Samsung monitor at startup which is mucking things up, and I just have to accept starting with the second disconnected monitor then plug it in again after a successful login.

  Samsung does not write the monitor for Mac drivers (for some reason any), that's why the customer support figures that there is a hangup at startup. But why OS X recognize the monitor and run fine otherwise? Why only hang at boot time? And why my Mac Book Pro 2007 running the same version of El Capitan boot fine with the connected monitor? It has something to do with the Thunderbolt/mini-DP-to-DVI connection? I don't know, and I guess that Apple's Support is not either.

  I fell on a hack, which is as follows:

  1. start with the second monitor connected

  2. in the "black screen with cursor" hold the power button quite long to put the computer to sleep

  3 wake up the computer with the keyboard or trackpad or other

  4 and now the login screen will appear.

  5 log in as usual.

  6.

  I hope this helps someone. One day I'll get a more compatible monitor and it will not be a Samsung.

  They make nice dish, however.

• Covered with cursor movement

  Hi all

  Scenario of

  I have a chart with 2 sliders say Cur_1 and Cur_2. Cur_1 can have any value Y and Cur_2 has a value of Y which is "Num" less than the Cur_1 Y value where "Num" can be any number.

  For example, if Cur_1 = 50 and Num = 10, then Cur_2 = 40

  Whenever Cur_1 is moved, the Cur_2 is moved by program accordingly. Cur_2 can be moved independently, but its value there cannot be greater than the value Y Cur_1.

  Problem

  
  

  Now the problem is when the value of 'Num' is '0', then Cur_1 and Cur_2 are superimposed. In such cases, I am not in a position lower than if I move the top slider to move. And in my code as I have explained above, Cur_2 must move against the Cur_1 when ever Cur_1 is moved. Even if I think that move the top slider (Cur_1) and then move the lower, it is not possible because the lower slider should move automatically according to the Cur_1 movement.

  I'd be happy if someone can help me with any kind of suggestions.

  Thank you and best regards,
  Nitz

  (PS - sorry for the long description. I don't have a code to share with you all. So I had to expain it this way.)

  Hi Anand,

  Make the cursor visible or invisible disable... Still, it will be activated causing the under cursor is not to move. I don't have a specific solution. So I had to go forward with a work around. I am attaching here... You can have a look if you wish...

  Kind regards
  Nitz

• Black Pavilion a305w screen with cursor flashing at the beginning upward

  When the computer starts, starts the hp screen then black screen with cursor flashing/dash appears in the left corner. When a key is pressed, it beeps only nothing happening even when the f keys are pushed.

  I tried to disconnect the optical drive still same thing blincking momentum in the left corner only. Thanks for your help, what would you suggest then.