Covered with cursor movement

Similar Questions

• Windows 7 Pro black screen with cursor on all modes and no login screen

  OK so basically, it's how, my laptop decided to me-screw right when I need to make some adjustments to my final project for next week.

  Friday he started very well in class and at the end of the course at 6:30, I stopped him. I normally don't that often stopped because I usually find myself opening upward in an hour later. But I did this time and when I got home and turned on around 9:00, it started like this:

  Screen Compaq PhoenixBIOS > Windows boot animation > black screen with cursor mobile, no login screen

  No screen connection. No sound. Not nothing but a black screen and the cursor movement. So I force shutdown and turned it back, this time he asked a chkdsk and I ran it. A ton of stuff file unreadable came and it took all night to run through it all. Tried to start again and Windows Error Recovery came and I tried all Modes of security and start normally and all produce the same black screen and the cursor with no login screen.

  Then I used my Windows 7 dvd repair to try and system restore to a week before. That's where I noticed that windows had installed a critical update at 12:00 on Friday. Tried to restore before that, but he failed. Gave me an error 0 x 80070057 and said I should run chkdsk /r and then try again. Then I used the cmd prompt through dvd repair and he has seen all these things wrong file again once recovered things then realized hours later. Tried to restore the system again. Still the same error. A run chkdsk again through the cmd prompt, then he went to clean without errors or orphaned files or anything, but it took a lot of time. I used the Startup Repair, and he has not found anything wrong either. But still the same error the system restore.

  So I looked around online for the last two days, trying to figure out and that someone said to try CTRL + Alt + Delete, the sticky shift key thing. So I tried to boot the system again, same black screen with cursor movement. I did CTRL + Alt + Delete, nothing. Press and hold the SHIFT key, and a pop-up window asked FilterKeys. Press the SHIFT key 5 times, a popup asked about sticky keys. But that's all I can get it to do. Nothing else. I tried to boot into safe mode with F8, chose, each of them and that changes in screen resolution and the words "safe mode" in all the corners of the screen. If the repair dvd's while I start in safe mode, it will open as well in safe mode, but with the same black background mode. Tried running sfc/scannow through repair invites cmd of the dvd and it says a system repair is pending and he had to restart, and then run the sfc/scannow. Tried, but it doesn't do anything when I restart except go to Windows Error Recovery asking either start in any safe mode or normally. And then it's just black screen again.

  So I am at a complete loss what to do now. After all of this mess, it seems that this Windows Update Friday afternoon did something and when I booted it upward once again, his cause nothing but problems. I think it has something to do with the display and the graphics card drivers? It's as if the thing starts but I do not see anything either because the sticky keys appears, but sees nothing else, no matter what I do. Seriously, I don't want to this junk because this is a new hard drive and I was just able to retrieve my files from my old hard drive that had epic failures as well. And I just got this new specifications I wanted as well.

  Laptop Spec:

  Compaq CQ50-115nr
  OS: Windows 7 Professional
  HARD drive: Western Digital Scorpio Blue 320 GB SATA WD3200BEVT
  Processor: AMD Turion X 2 RM-70
  Graphics card: NVIDIA GeForce 8200 M G
  Memory: 3 GB RAM

  If someone could seriously help me I would be VERY happy.

  Hello

  This isn't good news.

  --------------------

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not try to repair it, you can borrow a friends because they are not protected against copying. You can also buy the physical disks
  good system machine cheap that you already own Windows (you have to reinstall them if)
  required). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• 10.11.6 - black screen with cursor in security update 2016-001

  Hello

  After installing safety day 2016-001 10.11.6 and reset as part of the installation process, I get a white apple logo, the white line will blink twice and then I get a black screen with white cursor. The cursor moves with the mouse but nothing happens and I do not get the login screen. This happened on my MacBook Pro and my iMac (retina 5K, end of 2014) (2015).

  Any help is greatly appreciated.

  Best regards

  Tom

  Same problem with iMac 5K, no problems with MacBook 2016 if. Very glitchy update indeed.

• The cursor moves erratically even when no mouse connected

  I've had the problem for over a year now, but I never received tour to report. From time to time, my cursor moves erratic around the screen, jumping from position every few seconds. I have a MBP, but often use it plugged on a screen and mouse etc with the lid closed. The problem persists if Setup like that, even when the external mouse is disconnected, or when simply use it as a laptop. I recently wiped the hard drive and reinstalled a clean copy of Mac OS x from zero (no backup), but the problem still persists.

  Any ideas?

  Looks like a hardware problem. How old is this MBP? Sometimes, when they get older, the battery may start to inflate and put pressure on the trackpad.

• When you type in Firefox, the cursor moves to the left while everything is written backwards.

  Recently, whenever I try to type so that Firefox 9.01, the cursor moves to the left while everything is written backwards. I can normally type into a word document to have done with it and cut and pasted in this message. I use Windows XP. I closed Firefox and restarted my computer twice with no success to solve this problem.

  Maybe this recent thread on the issue even helps.

  • [910552/questions/910552] It started a few days ago firefox will type back

• The mouse cursor moves on slow monition Dynadock U-related

  Hello

  I'll just borrow the subject to ask a question or an opinion on dynadock U.
  I have tecra S10 set to date, with win 7 32 bit Enterprise connected through dynadock you for external monitor AOC. Problem that I face is that my mouse (cursor) moves like on slow monition. At some delays just work with office (outlook or word), or surf the net - Explorer.
  As I said the two computer and dynadock are updated with the latest drivers.
  On dynadock are connected: two printers, keyboard, mouse, external HD and speakers.

  No idea how to fix?

  THX,
  marjaN

  Hello

  The same also occurs if the mouse is connoted to s for computer laptop USB port directly?

  Please check

• Satellite Pro 6100: cursor moves out of control on the screen

  Hey guys,.

  I'm seriously going crazy right about now... my problem is the following:

  I have a Toshiba Satellite Pro 6100, Windows XP Professional with SP2, memory: 512 MB.

  About two weeks ago my cursor began to move up and down whenever I pressed the space bar. It has gotten worse since. My cursor moves out of control across the screen (there are usually in the upper right or lower left) and I can not recover. I know for a fact that it has nothing to do with my external mouse (optical), because this problem also occurs when I use my pointing device. Even in safe mode.

  The thing I've tried:
  Ran Spybot: Search and Destroy
  Ran Adaware
  Xoftspy RAN
  A ran Symantic Antivirus 10 (complete analysis of the system in safe mode)
  New keyboard
  New motherboard

  Nothing helps. I'm this close to format my pc. Does anyone have a suggestion of what to do?

  Thanks in advance!

  Hello

  I put t he understand. You have changed the keyboard and the motherboard, but you did not recover the OS with the Toshiba Recovery CD.
  The first procedure that you should do is the new installation of the OS before you change or replace anything on the laptop.

  Unfortunately, it is not easy to say why it occurs. A friend of mine has a similar problem with the cursor. The cursor has jumped on the screen and it was not possible to open applications. It has (or service) resolved with the replacement of keyboard.

  If the new installation OS doesn't fix this strange cursor, so I recommend you contact Toshiba.

• When you tap on Satellite A215, the cursor moves

  This isn't a big problem.
  When I write a letter by e-mail the cursor will just up and move somewhere else in the letter.
  The computer I use is Satellite A215-S4807.

  I'd appreciate any help I can get with this issue.

  Thank you

  Hello

  The same thing happened to me and I thought that it s a touchpad or touchpad driver problem.

  Finally, I discovered, that I touched the surface of touchpad accidentally while typing.

  I've disabled the keyboard with the keys FN + F9 and since I didn t notice no cursor moves.

  Bye and good weekend

• cursor move unexpectaly

  While I'm typing my cursor moves to the previous parts of this paragraph and types where I certalnlydon can't like. How can I stop this. I can be anywhere, typng as now, and the cursor moves and put my letters in some parts of the paragraph I just typed. I have a PC Dell laptop and do not use a mouse, but a touch pad on the laptop.

  Hello

  Check with the manufacturer of system support, documentation in line, or forums as there
  probably are shortcut keys that enable and disable the touchpad functions.

  Dell - disable or enable the touchpad by using the access key
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&docid=424135&doclang=en&l=en&s=Gen&cs

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with)
  Entries of TouchPad) and some have a utility that loads in the Notification area near clock on
  at the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel - device - mouse and pointing devices Manager - Double click on the button
  Cushion - the driver tab - click on Update Driver (which is may not make anything as long as MS is far behind)
  drivers of certification), now RIGHT CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself
  (all in it). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
  of work.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need
  to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  ==========================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Screen is scrolling down repeatedly and the cursor moves on its own.

  The cursor is rolling along of type I.m

  You do not give much information about what is really happening, but the first two points to check are the mouse and the keyboard, before looking for other hardware or software problems.

  If you have another mouse and keyboard available, you can try reverse the two and restart the computer to see if the problem persists.  If not a little more information would be needed before I could give advice on the best way to solve the problem.

  You're talking about the screen, scroll down and the cursor moving without the mouse - these are two separate actions.

  He is not anywhere on the screen do scroll down unless you have a running program - this scrolling happens with all programs that could scroll, or simply with a certain program?

  The cursor moves randomly or according to a specific orientation?  The cursor move around all the time or only in certain programs?

  These problems occur all the time, or only when you do something, like click with the mouse or use the scroll wheel?

• cursor moves irregularly... typing very difficult because it moves independently running programs...

  Let me look at what I've done.

  • I had to reformat my hard drive.  I rebooted my Windows Vista (Home Basic) and made Windows updates on a daily basis.
  • Cursor of the laptop worked very well.  Now, after reformatting, my cursor will move... he can move at the beginning of the sentence or at the end of the paragraph, or even a response, send button or turn off the page completely.  It is random.  Cursor movement happen everywhere... online on a site, the same wrote this question and it happens if I use word, excel, or Notepad too.
  • I typed slowly, being careful NOT to communicate with the touchpad while typing.  Despite this, the cursor will always flow.
  • I tried to make changes in the settings of the control panel mouse and touchpad settings.   That didn't work... actually, I can't even find the touchpad settings more.  In the mouse property settings, I tried the options for "click lock" and "pointer options"... that does not work either.
  • I was at a loss, so even if I don't have a mouse attached via the USB port, I have updated the mouse only driver files that I see.  I've updated the two sets of files for driver for the keyboard and the mouse and nothing has changed.

  Any ideas?

  1 million thanks for any help!

  * & #$* I ^ #$IH #.

  Angela in Atlanta

  Thank you for your response.   I had to reload my drivers of Dell devices since access to my settings of touchpad (in the settings of the mouse) were absent.  Now I'm adjusting the touchpad settings, hopefully it will work.

  PC - Dell - Inspiron laptop 1521.
  32 bit OS

• E-mail frozen - cursor moves but does not respond when you click

  cursor moves but does not respond when you click

  Hello
   
  1. what email program are you using? Is - this Windows Mail or Outlook?
  2. is the problem with emails in Gmail or Hotmail or Yahoo on Internet Explorer?
   
  This can happen if the e-mail scanner is running on the system. The analysis of electronic mail is a built-in feature of many security software. We recommend that you disable the e-mail analysis and check the result.
   
  Please provide us with more details on the issue, so that we can better help you.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• the mouse cursor moves constantly

  It is difficult to open anything or move to any particular item because the cursor moves constantly on it.   PLEASE NOTE: Although my address on Live ID is , I need to be contacted at .   I have to find a way to change my address with Live ID.

  Lynda

  Hi Lynda,

  1. you are using a laptop or desktop?

  2. what kind of mouse you are using? What is a wired or wireless mouse?

  3. did you of recent changes to the computer?

  If you use a laptop, try to reduce the sensitivity of the Touchpad and check

  Change the settings of the mouse

  If you are using a desktop computer, you can try to reduce the hardware acceleration and check.

  a. click the Start button, Control Panel.

  b. now, select appearance and personalization. under display, select adjust screen resolution.

  c. now, select adjust the resolution.

  d. click Advanced settings.

  e. now, click the Troubleshooting tab, and select the change settings button.

  f. in the Security dialog box, click on continue.

  g. move the hardware acceleration slider to the third notch.

  h. click OK and restart Windows.

  Hope this information is useful.

• in my laptop, the cursor moves automatically

  In my laptop, I use an external mouse (without him), the cursor moves automatically to the position left more whenever I typed anything in any program. I use mouse microsoft 200 optical. I scanned for virus problem with my NORTON 360 and it does not have any solution performance. Help

  Hey pmani,

  The below knowledge base article has many suggestions for your question. Please follow the suggestions to solve this problem.

  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Inspiron 9400 laptop, Windows Vista, black screen with cursor, befor connection, safe mode works.

  Good then Ive internet scowerd to subject a houre read a lot of black screen of death without success problems.  Ive come to the conclusion that it is a unique problem.

  Inspiron 9400, Windows vista

  Problem: I'm catching up after startup, it does not show the vista logo but showed the loading bar, doesn't make it to the login screen. Instead shows the bright black screen with a cursor, the cursor moves freely. Ctrl-alt-del does not work, StickyKeys is sound but no visual. So we know that this abomination of windows load. We are now trying to startup repair. We know that the battery did not work because more than a year, the bios indicates there is no battery, I wonder what this block that says battery is lol.

  Whatcha got for me internet doesn't let me down.

  PS one of the dumbest moments of windows.

  Repair window said. May take a few minutes.

  Startup Repair process may take an hour to complete

  Hi Zirrer,

  Step 1:

  I suggest you to visit this link provided below.

  Why my screen is black when I start windows 7
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Step 2:

  I would also suggest update you your display adapter drivers and see if that fixes the problem.

  Reference:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  To download drivers, you can visit this link below.

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&CS=19&l=en&s=DHS&OS=WLH&OSL=en&SystemID=INS_PNT_P4_9400&CATID=-1&impid=-1

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.