Client certificate and router WebVPN
Hello!
In my test harness I can not to run my webvpn configuration =.
I have several components: AD MS, MS CS (but without NDE), 2911 router and client computer. Client and router have a certificate of MS CS. In my setup I use certificate or aaa (LDAP) authentication and authentication work aaa good. But the client certificate authentication does not work. And my internal https services do not work too--"no certificate or invalid", but this strange because I imported the CA certificate for that.
Can you help me it work?
My version of 2911:
Cisco IOS software, software C2900 (C2900-UNIVERSALK9-M), Version 15.1 (3) T, RELEASE SOFTWARE (fc1)
My Config:
AAA authentication login webvpn group local ldap
IP local pool webvpn 192.168.200.1 192.168.200.254
bind authenticates root-dn cn = webvpn, OU = team, dc = domain, dc = com password [email protected]/ * /.
WebVPN vpn gateway
IP address
SSL root-ca trustpoint development ! WebVPN install svc flash0:/webvpn/anyconnect-dart-win-2.5.3055-k9.pkg sequence 1 ! employee framework WebVPN SSL authentication check all ! connection message 'Portal VPN' ! the policy group peche1 List of URLS "on the inside". functions compatible svc filter VPN SPLIT tunnel SVC-pool of addresses "webvpn" netmask 255.255.255.0 SVC by default-domain "domain.com". SVC Dungeon-client-installed SVC split dns "domain.com". SVC split include 192.168.0.0 255.255.0.0 SVC-Server primary dns 192.168.1.1 SVC-Server secondary dns 192.168.1.2 Citrix enabled virtual-model 1 strategy-group-by default peche1 AAA authentication list webvpn vpn gateway authentication certificate user name - sign up root CA trustpoint-AC User location flash0 profile: / userprof development ! Crypto pki trustpoint root-ca Terminal registration revocation checking no rsakeypair root-ca ! I imported with CA pkcs12 certificate. My debug (it happened so I am trying to access my webvpn portal and I choose my certificate of MS CS for access) 5 Jun 11:22:39: WV: validated_tp: cert_username: matched_ctx: 5 Jun 11:22:39: WV: could not get opssl appinfo sslvpn 5 Jun 11:22:39: WV: could not get opssl appinfo sslvpn 5 Jun 11:22:39: WV: error: no certificate validated for the customer Can someone explain to me why it does not work? Resolved by the update IOS - version 15.2 (4) M2. Concerning Tags: Cisco Security Client certificate SSL V3.0 CFX_HTTP5 worked great! I wish just called him 'good '. I asked the question about a popular mailing list and got absolutely no response. I also searched Google for a few hours and did not find anything. CFX_HTTP5 did the job and now I can finish what I started instead of saying my client I found a mission critical issue that ColdFusionMX couldn't do. Thanks again! Client certificate authentication and proxy HTTPS WSA Hello on a clients site, we have a virtual Proxy WSA with WCCP running behind a firewall of ASA. Only we are facing a problem: the customer has a site that authenticates the client through the certificate. It does not work. If I dasable the transparent proxy for this host, everything works fine. I solved it now bypassing the proxy server for the spicific site. Is there another solution to allow clients to authenticate using certificates to a Web site? Hello Does it means that websites (some sites) request for client certificate to authenticate during the SSL negotiation? If this is true, can you check your option since default CLI interface HTTPS when HTTPS servers request certificate of the client during the handshake, WSA will respond with unavailable certificate and the handshake will normally be breaks. To check this: 1. log in to the CLI 5. keep pressing enter until the initial scope guest PPTP VPN between clients Windows and Cisco 2921 router Hi all! I have a problem with PPTP VPN between Windows clients and router Cisco 2921 with permission of RADIUS (IAS). When I try to connect to Cisco 2921 of Windows 7 by using MS-CHAP v2 I get the message 778: it was not possible to verify the identity of the server. Can I use PAP - power is OK. On Windows XP, the same situation. Cisco config: version 15.0 horodateurs service debug datetime msec Log service timestamps datetime msec encryption password service ! hostname gw.izmv ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings ! AAA new-model ! AAA authentication ppp default local radius group of ! AAA - the id of the joint session ! clock timezone + 002 2 ! No ipv6 cef IP source-route IP cef ! ! Authenticated MultiLink bundle-name Panel ! Async-bootp Server dns 192.168.192.XX VPDN enable ! VPDN-Group 1 ! PPTP by default VPDN group accept-dialin Pptp Protocol virtual-model 1 echo tunnel PPTP 10 tunnel L2TP non-session timeout 15 PMTU IP adjusting IP mtu ! redundancy ! interface Loopback0 IP 192.168.207.1 255.255.255.0 ! ! interface GigabitEthernet0/0 Description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE $ 0/0 IP 192.168.192.XXX 255.255.255.0 IP 192.168.192.XX 255.255.255.0 secondary IP nat inside IP virtual-reassembly automatic duplex automatic speed ! ! interface GigabitEthernet0/1 no ip address Shutdown automatic duplex automatic speed ! ! interface GigabitEthernet0/2 Description - Inet- no ip address NAT outside IP IP virtual-reassembly automatic duplex automatic speed PPPoE enable global group PPPoE-client dial-pool-number 1 No cdp enable ! ! interface virtual-Template1 IP unnumbered Loopback0 IP mtu 1492 IP virtual-reassembly AutoDetect encapsulation ppp by default PPP peer ip address pool PPP mppe auto encryption required PPP authentication ms-chap-v2 ! ! interface Dialer1 the negotiated IP address NAT outside IP IP virtual-reassembly encapsulation ppp Dialer pool 1 Dialer-Group 1 PPP authentication pap callin PPP pap sent-username DSLUSERNAME password DSLPASSWORD No cdp enable ! ! IP local pool PPP 192.168.207.200 192.168.207.250 IP forward-Protocol ND ! ! overload of IP nat inside source list NAT_ACL interface Dialer1 IP nat inside source static tcp 192.168.192.XX 25 expandable 25 82.XXX.XXX.XXX IP nat inside source static tcp 192.168.192.XX 1352 82.XXX.XXX.XXX 1352 extensible IP route 0.0.0.0 0.0.0.0 Dialer1 ! NAT_ACL extended IP access list deny ip 192.168.192.0 0.0.0.255 192.168.YYY.0 0.0.0.255 deny ip 192.168.192.0 0.0.0.255 192.168.YYY.0 0.0.0.255 deny ip 192.168.192.0 0.0.0.255 192.168.YYY.0 0.0.0.255 deny ip 192.168.192.0 0.0.0.255 192.168.YYY.0 0.0.0.255 permit tcp 192.168.192.0 0.0.0.255 any eq www permit tcp 192.168.192.0 0.0.0.255 any eq 443 permit tcp 192.168.192.0 0.0.0.255 any eq 1352 permit tcp host 192.168.192.XX no matter what eq smtp permit tcp 192.168.192.0 0.0.0.255 any eq 22 permit tcp host 192.168.192.XX no matter what eq field permit tcp host 192.168.192.XX no matter what eq field permit tcp host 192.168.192.XX no matter what eq field allowed UDP host 192.168.192.XX matter what eq field allowed UDP host 192.168.192.XX matter what eq field allowed UDP host 192.168.192.XX matter what eq field ! host 192.168.192.XX auth-port 1645 1646 RADIUS server acct-port Server RADIUS IASKEY key ! control plan ! ! ! Line con 0 line to 0 line vty 0 4 line vty 5 15 ! Scheduler allocate 20000 1000 end Debugging is followed:
14:47:51.755 on 21 oct: PPP: Alloc context [294C7BC4] 14:47:51.755 on 21 oct: ppp98 PPP: Phase is 14:47:51.755 on 21 oct: ppp98 PPP: using AAA Id Unique = 8 b 14:47:51.755 on 21 oct: ppp98 PPP: permission NOT required 14:47:51.755 on 21 oct: ppp98 PPP: via vpn, set the direction of the call 14:47:51.755 on 21 oct: ppp98 PPP: treatment of connection as a callin 14:47:51.755 on 21 oct: ppp98 PPP: Session Session handle [62] id [98] 14:47:51.755 on 21 oct: ppp98 TPIF: State of the event [OPEN] [initial check] 14:47:51.755 on 21 oct: ppp98 PPP LCP: switch to passive mode, State [stopped]
14:47:53.759 on 21 oct: ppp98 PPP LCP: exit passive mode, State [departure] 14:47:53.759 on 21 oct: LCP ppp98: O CONFREQ [departure] id 1 len 19 14:47:53.759 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8) 14:47:53.759 on 21 oct: ppp98 TPIF: AuthProto MS-CHAP-V2 (0x0305C22381) 14:47:53.759 on 21 oct: ppp98 TPIF: MagicNumber 0xF018D237 (0x0506F018D237) 14:47:53.759 on 21 oct: ppp98 TPIF: event [UP] State [departure at REQsent] 14:47:54.351 on 21 oct: ppp98 TPIF: I CONFREQ [REQsent] id 0 len 18 14:47:54.351 on 21 oct: ppp98 TPIF: MRU 1400 (0 x 01040578) 14:47:54.351 on 21 oct: ppp98 TPIF: MagicNumber 0x2F7C5F7E (0x05062F7C5F7E) 14:47:54.351 on 21 oct: ppp98 TPIF: PFC (0 x 0702) 14:47:54.351 on 21 oct: ppp98 TPIF: RAC (0 x 0802) 14:47:54.351 on 21 oct: LCP ppp98: O CONFNAK [REQsent] id 0 len 8 14:47:54.351 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8) 14:47:54.351 on 21 oct: ppp98 TPIF: State of the event [receive ConfReq-] [REQsent to REQsent] 14:47:54.751 on 21 oct: ppp98 TPIF: I CONFACK [REQsent] id 1 len 19 14:47:54.751 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8) 14:47:54.751 on 21 oct: ppp98 TPIF: AuthProto MS-CHAP-V2 (0x0305C22381) 14:47:54.751 on 21 oct: ppp98 TPIF: MagicNumber 0xF018D237 (0x0506F018D237) 14:47:54.751 on 21 oct: ppp98 TPIF: State of the event [receive ConfAck] [REQsent to ACKrcvd] 14:47:54.915 on 21 oct: ppp98 TPIF: I CONFREQ [ACKrcvd] id 1 len 18 14:47:54.915 on 21 oct: ppp98 TPIF: MRU 1400 (0 x 01040578) 14:47:54.915 on 21 oct: ppp98 TPIF: MagicNumber 0x2F7C5F7E (0x05062F7C5F7E) 14:47:54.915 on 21 oct: ppp98 TPIF: PFC (0 x 0702) 14:47:54.915 on 21 oct: ppp98 TPIF: RAC (0 x 0802) 14:47:54.915 on 21 oct: LCP ppp98: O CONFNAK [ACKrcvd] id 1 len 8 14:47:54.915 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8) 14:47:54.915 on 21 oct: ppp98 TPIF: State of the event [receive ConfReq-] [ACKrcvd to ACKrcvd] 14:47:55.275 on 21 oct: ppp98 TPIF: I CONFREQ [ACKrcvd] id 2 len 18 14:47:55.275 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8) 14:47:55.275 on 21 oct: ppp98 TPIF: MagicNumber 0x2F7C5F7E (0x05062F7C5F7E) 14:47:55.275 on 21 oct: ppp98 TPIF: PFC (0 x 0702) 14:47:55.275 on 21 oct: ppp98 TPIF: RAC (0 x 0802) 14:47:55.275 on 21 oct: LCP ppp98: O CONFACK [ACKrcvd] id 2 len 18 14:47:55.275 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8) 14:47:55.275 on 21 oct: ppp98 TPIF: MagicNumber 0x2F7C5F7E (0x05062F7C5F7E) 14:47:55.275 on 21 oct: ppp98 TPIF: PFC (0 x 0702) 14:47:55.275 on 21 oct: ppp98 TPIF: RAC (0 x 0802) 14:47:55.275 on 21 oct: ppp98 TPIF: State of the event [receive ConfReq +] [ACKrcvd to open] 14:47:55.295 on 21 oct: ppp98 PPP: Phase is AUTHENTICATING, 14:47:55.295 on 21 oct: ppp98 MS-CHAP-V2: O CHALLENGE id 1 len 28 of 'gw.izmv '. 14:47:55.295 on 21 oct: ppp98 TPIF: State is open 14:47:55.583 on 21 oct: ppp98 MS-CHAP-V2: I ANSWER id 1 len 71 of "domain\username". 14:47:55.583 on 21 oct: ppp98 PPP: Phase TRANSFER, tempting with impatience 14:47:55.583 on 21 oct: ppp98 PPP: Phase is AUTHENTICATING, unauthenticated user 14:47:55.587 on 21 oct: ppp98 PPP: request sent MSCHAP_V2 LOGIN 14:47:55.591 on 21 oct: ppp98 PPP: received LOGIN response PASS 14:47:55.591 on 21 oct: ppp98 PPP AUTHOR: author data NOT available 14:47:55.591 on 21 oct: ppp98 PPP: Phase TRANSFER, tempting with impatience 14:47:55.595 on 21 oct: Vi3 PPP: Phase is AUTHENTICATING, authenticated user 14:47:55.595 on 21 oct: Vi3: given msg No. MS_CHAP_V2
14:47:55.595 on 21 oct: Vi3 MS-CHAP-V2: SUCCESS O id 1 len 46 msg is "tG @ #QDD @(@B@ (@[email protected]/ ** / @I @:[email protected]/ ** / @@@ EJFDE)). 14:47:55.595 on 21 oct: Vi3 PPP: Phase is in PLACE 14:47:55.595 on 21 oct: Vi3 CPIW: protocol configured, start state cf. [original] 14:47:55.595 on 21 oct: Vi3 CPIW: State of the event [OPEN] [Initial report on startup] 14:47:55.595 on 21 oct: Vi3 CPIW: O CONFREQ [departure] id 1 len 10 14:47:55.595 on 21 oct: Vi3 CPIW: address of 192.168.207.1 (0x0306C0A8CF01) 14:47:55.595 on 21 oct: Vi3 CPIW: event [UP] State [begins to REQsent] 14:47:55.595 on 21 oct: Vi3 CCP: protocol configured, start state cf. [original] 14:47:55.595 on 21 oct: Vi3 CCP: State of the event [OPEN] [Initial report on startup] 14:47:55.595 on 21 oct: Vi3 CCP: O CONFREQ [departure] id 1 len 10 14:47:55.595 on 21 oct: Vi3 CCP: MS - PPC supported bits 0 x 01000060 (0 x 120601000060) 14:47:55.595 on 21 oct: Vi3 CCP: event [UP] State [begins to REQsent] 14:47:55.599 on 21 oct: % LINK-3-UPDOWN: Interface virtual-access.3, changed State to 14:47:55.603 on 21 oct: % LINEPROTO-5-UPDOWN: Line protocol on Interface virtual-access.3, changed State to 14:47:56.027 on 21 oct: Vi3 LCP: I have TERMREQ [open] id 3 len 16
14:47:56.027 on 21 oct: Vi3 LCP: (0x2F7C5F7E003CCD740000030A) 14:47:56.027 on 21 oct: Vi3 CPIW: event [BOTTOM] State [REQsent on startup] 14:47:56.027 on 21 oct: Vi3 CPIW: State of event [CLOSE] [begins with initial] 14:47:56.027 on 21 oct: Vi3 CCP: event [BOTTOM] State [REQsent on startup] 14:47:56.027 on 21 oct: Vi3 PPP DISC: MPPE required not negotiated 14:47:56.027 on 21 oct: Vi3 PPP: sending Acct event [low] id [8B] 14:47:56.027 on 21 oct: Vi3 CCP: State of event [CLOSE] [start with initial] 14:47:56.027 on 21 oct: Vi3 LCP: O TERMACK [open] id 3 len 4 14:47:56.027 on 21 oct: Vi3 LCP: event [receive TermReq] State [Open to stop] 14:47:56.027 on 21 oct: Vi3 PPP: Phase ENDS 14:47:56.027 on 21 oct: Vi3 LCP: event [CLOSE] [off status of closing] 14:47:56.675 on 21 oct: Vi3 PPP: block vaccess to be released [0x10] 14:47:56.675 on 21 oct: Vi3 LCP: event [CLOSE] State [closing closing] 14:47:56.679 on 21 oct: Vi3 LCP: event [BOTTOM] State [closing on Initial] 14:47:56.679 on 21 oct: Vi3 PPP: compensation AAA Id Unique = 8 b 14:47:56.679 on 21 oct: Vi3 PPP: unlocked by [0x10] always locked by 0 x [0] 14:47:56.679 on 21 oct: Vi3 PPP: free previously blocked vaccess 14:47:56.679 on 21 oct: Vi3 PPP: Phase is BROKEN 14:47:56.679 on 21 oct: % LINK-3-UPDOWN: Interface virtual-access.3, changed State to down 14:47:56.683 on 21 oct: % LINEPROTO-5-UPDOWN: Line protocol on Interface virtual-access.3, state change downstairs I'll be very grateful for any useful suggestions We had the same problem using MS-CHAP-V2 and 3945 router using IOS 15.2. When you add the same combination of username/password locally it worked fine but it wasn't no of course of the solution. We have solved this problem by adding the following line in the config file: AAA authorization network default authenticated if This is because Windows 2000 clients require the use of a statement of authorization aaa in the router config. Maybe it was default (and therefore not shown) previous iOS releases. Success! Wil Schenkeveld Certificate expired on a server that has only the client VMware and VMware workstation Our scanners detected security certificate expired vmware on a server. The only products currently running on this server are VMware workstation and the vSphere client. I looked in all the installed certificates and their lack of vmware. When I open a web browser and go to the IP address of servers using port 443 I get a message of invalid certificate and look a certificate it shows expired recently, and was published by VMware. Where can I find this certificate and what is used to indicated the products installed on this system? The certificate was for workstation server configurations (connection sharing VMs/Remote). Just disabled the sharing feature because it is not used. Find the certificate in the program data-file VMware. Could not find information on renewal, only how to replace it. ASA VPN client certificate authentication Hi all We finished our from the ASA Firewall VPN client. Is it possible to authenticate users with certificate. Certificate itself being our ASA server. Our requirement is to have:-user must use one laptop company provided for the VPN connection. I think it's possible with certificate OmniPass. Y at - it another way to have this control. Thank you -John Hi John,. It is indeed possible to authenticate your users to VPN client with certificates and it will prevent guests who do not have the certificate installed on their computer to connect. In the subject to use the ASA CA Local, I advise you to use only if you have Anyconnect client and not the classic IPSEC client. The local ASA CA has been implemented for use for WebVPN and Anyconnect sessions only so I advise you to use an external CA if your customer is the IPSEC one. Kind regards Nicolas How extract/export a client certificate of FF mobile? I created an account for StarSSL of my Android device and a client certificate has been downloaded/installed in the mobile browser. certutil k d sql:. shows something like: certutil: check the chips 'certificate of NSS DB' slot 'private NSS user key and Certificate Services. Now, I know I should use pk12util to extract the key, but the command: Pk12util o ~/cert.p12 - n '< ID from the top >' sql d:. Displays the following error: Pk12util: find the Pseudo user certificates could not: PR_LOAD_LIBRARY_ERROR: failed to load dynamic library Thank you very much for help and keep excellent work with mobile Firefox (and office) Resolved by myself, the solution is not to enter the ID of the certutil command, use name instead of the certificate: How to export a client certificate on Firefox for Android? In the process of registration on www.startssl.com a client certificate was added to my Firefox for Android. I would also like to use this certificate on my Firefox Desktop, is it possible? Thanks for any help! HI SumoAlex, I understand that you would like to know how to export the client certificate to the Android and also use it on the desktop. IT may not work on the desktop, but I don't know that you can turn on remote debugging in Firefox. The cert.db on the desktop stores all certificates. (is it the same on the Android device?) Try the Cert Manager add on for Firefox for Android. Ref stackoverflow.com I hope this helps. Insider source subscription. Could not retrieve the client certificate Hi all I created subscription source initiated between two Windows 2008 R2. The source (client) cannot connect to the server. Logs on the client: Send the request for operation to the destination machine enumeration and the server.corp.domain.com:5986 port Authenticate the user using the Client certificate mechanism User authentication failed. The credentials did not work. Has received the answer of the layer network; status: 401 (HTTP_STATUS_DENIED) WSMan enumeration operation failed, error code 5 Opens a session on the server. Sending HTTP error to the client after a failure of transportation. Could not retrieve the client certificate Send the HTTP 401 response to the client and disconnect the connection after sending the answer The user authorization failed with error 5Authorizing the user Authentication using client certificate with the client.corp.domain.com object is successfully How to fix the error "unable to retrieve the client certificate? Hello Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums. http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer See you soon. What is a DHCP client address and what is an ISP? Try to connect Tivo w / a wireless connector for my computer instead of using the phone line. TiVo's request for a DHCP client address and Pack International customer Hello The DHCP Dynamic Host Configuration Protocol () is a protocol for network configuration for hosts on networks IP (Internet Protocol). Computers that are connected to IP networks must be configured before it can communicate with other hosts. The essential information needed are an IP address and a default route and the routing prefix. DHCP eliminates the manual task by a network administrator. It offers a central database of devices that are connected to the network and eliminates duplicate resource assignments. See the following link: Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry VRF-lite, NAT and route-leak Hello, community. I'm trying to reproduce the installation with two clients (R1 and R2) program, router PE (R3) and common services (R4). Here is the configuration: R1: interface Loopback0 IP 10.10.1.1 255.255.255.255 ! interface FastEthernet1/0 192.168.15.1 IP address 255.255.255.0 ! IP route 0.0.0.0 0.0.0.0 192.168.15.5 R2: interface Loopback0 10.10.2.2 IP address 255.255.255.255 ! interface FastEthernet1/0 IP 192.168.16.1 255.255.255.192 ! IP route 0.0.0.0 0.0.0.0 192.168.16.5 R3: IP vrf VRF1 RD 1:1 export of road-objective 1:1 import of course-target 1:1 ! IP vrf VRF2 Rd 2:2 Route target export 2:2 import of course-target 2:2 ! interface FastEthernet0/0 R1 description IP vrf forwarding VRF1 IP 192.168.15.5 255.255.255.192 IP nat inside IP virtual-reassembly ! interface FastEthernet0/1 R2 description IP vrf forwarding VRF2 IP 192.168.16.5 255.255.255.192 IP nat inside IP virtual-reassembly ! interface FastEthernet1/0 R4 description IP 1.1.1.1 255.255.255.0 NAT outside IP IP virtual-reassembly ! IP route 0.0.0.0 0.0.0.0 1.1.1.2 IP route vrf VRF1 0.0.0.0 0.0.0.0 FastEthernet1/0 overall 1.1.1.2 IP route vrf VRF1 10.10.0.0 255.255.0.0 192.168.15.1 IP route vrf VRF2 0.0.0.0 0.0.0.0 FastEthernet1/0 overall 1.1.1.2 IP route vrf VRF2 10.10.0.0 255.255.0.0 192.168.16.1 ! IP nat inside source list 15 interface FastEthernet1/0 vrf VRF1 overload VRF2 of the IP nat inside source list 16 interface FastEthernet1/0 vrf, overload ! access-list 15 allow 192.0.0.0 0.255.255.255 access-list 15 allow 10.10.0.0 0.0.255.255 access-list 16 allow 192.0.0.0 0.255.255.255 access-list 16 allow 10.10.0.0 0.0.255.255 R4: interface Loopback0 IP 10.10.10.10 address 255.255.255.255 ! interface FastEthernet0/0 1.1.1.2 IP 255.255.255.0 ! IP route 0.0.0.0 0.0.0.0 1.1.1.1 The configuration is not operational. R1 #ping 192.168.15.5 Type to abort escape sequence. Send 5, echoes ICMP 100 bytes to 192.168.15.5, wait time is 2 seconds: !!!!! Success rate is 100 per cent (5/5), round-trip min/avg/max = 68/89/116 ms R1 #ping 192.168.15.5 source l0 Type to abort escape sequence. Send 5, echoes ICMP 100 bytes to 192.168.15.5, wait time is 2 seconds: Packet sent with the address 10.10.1.1 source !!!!! Success rate is 100 per cent (5/5), round-trip min/avg/max = 68/86/92 ms R1 #ping 1.1.1.1 source l0 Type to abort escape sequence. Send 5, echoes ICMP 100 bytes of 1.1.1.1, time-out is 2 seconds: Packet sent with the address 10.10.1.1 source .!!!! Success rate is 80% (4/5), round-trip min/avg/max = 292/357/400 ms R1 #ping 1.1.1.2 source l0 Type to abort escape sequence. Send 5, echoes ICMP 100 bytes to 1.1.1.2, time-out is 2 seconds: Packet sent with the address 10.10.1.1 source .!!!! Success rate is 80% (4/5), round-trip min/avg/max = 216/187/160 ms R1 #ping 10.10.10.10 source l0 Type to abort escape sequence. Send 5, echoes ICMP 100 bytes of 10.10.10.10, time-out is 2 seconds: Packet sent with the address 10.10.1.1 source .....
Success rate is 0% (0/5) I can't ping R4 loopback address ("shared resource" or also known as the "common service") It is the same with R2 (second customer). But I can still ping loopback R4 of R3: R3 #ping 10.10.10.10 Type to abort escape sequence. Send 5, echoes ICMP 100 bytes of 10.10.10.10, time-out is 2 seconds:
!!!!! Success rate is 100 per cent (5/5), round-trip min/avg/max = 40/88/116 ms It's the routing on R3 table: R3 #sh ip road | start the gateway Gateway of last resort is 1.1.1.2 network 0.0.0.0 1.0.0.0/24 is divided into subnets, subnets 1 C 1.1.1.0 is directly connected, FastEthernet1/0 S * 0.0.0.0/0 [1/0] via 1.1.1.2 R3 #sh ip route vrf VRF1 | start the gateway Gateway of last resort is 1.1.1.2 network 0.0.0.0 192.168.15.0/26 is divided into subnets, subnets 1 C 192.168.15.0 is directly connected, FastEthernet0/0 10.0.0.0/16 is divided into subnets, subnets 1 S 10.10.0.0 [1/0] via 192.168.15.1 S * 0.0.0.0/0 [1/0] via 1.1.1.2, FastEthernet1/0 R3 #sh ip route vrf VRF2 | start the gateway Gateway of last resort is 1.1.1.2 network 0.0.0.0 10.0.0.0/16 is divided into subnets, subnets 1 S 10.10.0.0 [1/0] via 192.168.16.1 192.168.16.0/26 is divided into subnets, subnets 1 C 192.168.16.0 is directly connected, FastEthernet0/1 S * 0.0.0.0/0 [1/0] via 1.1.1.2, FastEthernet1/0 So the question is what is the cause of the problem? How to troubleshoot? What is the troubleshooting steps? His does not work since the address IP of Destination that represents common Services is be routed locally to the THIS itself. That's the problem here. We must ensure that the Destination subnet is not pointing to what is happening here. R4: interface Loopback0 IP 10.10.10.10 address 255.255.255.255 ! R3-VRF1 S 10.10.0.0 [1/0] via 192.168.15.1 Concerning Verdier Domain name of ISE, certificates and portal comments Hello world We have a deployment ISE using our internal domain for its FULL domain name (example: ise01.private.local). Now, we want to use for authentication of access as a guest and have noticed that the default redirect URL uses the FULL of the ISE Server domain name. It works very well for our business machines that we have our own generated certificates and internal certification authority. As we don't want a certificate, that the errors that occur for our clients, we need to use a public domain FULL name. Are we better off by changing the domain name used by the servers of the ISE, or is it possible to change the redirect URL to use a custom domain? I've heard suggestions that change the domain name is not supported, but I can't find another way. Thank you Mark, You already have a public domain FULL name pointing to your ISE? If so, let's assume that you authenticate you if you use a CWA. First creat a new profile authorization, under common tasks, select redirect Web (CWA, DRW, MDM, DK, RPC), choose the authentication method (in this case, CWA) and set the ACL to use. Just below, select the name of the static host/IP and enter the COMPLETE public domain name that points to your ISE. From there, you can create a permission policy to reference the profile that you just created. Please rate useful messages and mark this question as answered if, in fact, does that answer your question. Otherwise, feel free to post additional questions. Charles Moreton ISE Local certificate and the certificates in the certificate store Hello I'm pretty new to ISE and read the document in the link below to create understanding "Local certificates" and "certificate store certificates. It seems that in the former certificate is used to identify the EHT on customers and is later used to identify customers at the ISE. http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-2/installation_guide... Now, what part of the ISE configuration told him to check the certificate sent by the client in its certificate store? I am somehow the mixture up with "Certificate authentication Profile", which is used in the identity Source sequence. But I guess that the certificate authentication profile is used to verify the certificates from a source of external identity as AD or LDAP. So where do we consider 'certificate certificate store' in our configuration of ISE. Thanks in advance for help out me. Kind regards Quesnel Hi Quesnel- (ISE) server certificate can be used for are: 1 HTTP/HTTPs - is for the ISE web server that is used to host various portals (comments, Sponsor, BYOYD, my devices, etc.). This certificate is normally issued by a public CA such as VeriSign or GoDaddy. A public certification authority is not necessary, but outside your environment, customers who do not trust the certification authority that issued the certificate will get an error HTTPs warning to users that the certificate could not be verified. 2 EAP - this is for EAP based authentication (EAP - TLS, EAP-PEAP, EAP-PEAP-TLS, etc.). This certificate is usually issued by an internal CA. The same certification authority issues usually user and/or computer-based certificates that can be used for the authentication type EAP - TLS. The certificate store is used to store root certificates and intermediate certificate authorities you ISE to trust. By example, if a computer is running a machine ISE authentication must trust the certification authority who has signed/issued the machine certificate. Therefore, the machine will also have to trust the certification authority which has issued/signed the ISE server certificate that you torque to the EAP process. Profile of teh authentication certificate is required if you want to use certificate based authentication. The CAPE tells ISE which attribute of the certificate should be used for the usernmane. Then based on that you can create more specific authorization profiles/rules information. You can also configure CAP to make a comparison of binary certificate with AD and confirm wheather or not the certificate is/has been published to AD. I hope this helps! Thank you for evaluating useful messages! / * Style definitions * / table. MsoNormalTable {mso-style-name: "Tabla normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "} Hello I am a novice with automatic certificates and I have a question. I want to implement EAP - TLS in a WPA deployment and I have a question on the client-side certificate. When I install a client certificate on a computer to a specific user, this certificate is valid for this machine and this user? Or can I export this certificate and use it in another machine, but the same user? Thanks in advance, Here is a good link that explains the requirements of Microsoft certificate. WRVS4400N Client filtering and AP Isolation Options missing I have a WRVS4400N with v1.1.13 firmware (latest firmware for versions 1.0 and 1.1 of the material). I need to configure the wireless client filtering and isolation of the AP. The frequently asked questions for this router contains information on this subject. However, my firmware on the router does contain no options described in the FAQ. These settings are only available in the v2.0 hardware? I hope that these settings can be made available in the 1.0 1.1 hardware. I wouldn't have to buy a new router to do this. The following is extracted from the FAQ WRVS4400N (Document ID: 109207) > Q. How can I configure the clients of filtering on the WRVS4400N wireless? > > A. Complete these steps in order to allow filtering wireless have: > 1. open the WRVS4400N web configuration page.
> > Q. What is the characteristic of Isolation AP, and how does it work? > > A. The Isolation AP feature isolates all the wireless clients and the wireless on your network devices to each other. The insulation is made at the level of the MAC address so > all wireless devices are able to communicate with the router, but not to each other. In order to use this feature, click on the button Activate and save the > parameters. The AP isolation is disabled by default.
FAQ seems to be for an older version of the firmware and the firmware later has the options you want under different headings. Filtering wireless is managed by going under wireless > wireless control. Select 'Enable' and then decide whether or not to control the connections by allowing only certain MAC addresses or deny certain MAC address and allowing all other wireless. There is even a button that shows the current wireless connected clients to make it easier to determine the MAC addresses of valid customers when filling out your list. The isolation of the AP is called Wireless insulation. Go under wireless > wireless security and select 'Enable' for isolation wireless. This will prevent communication between wireless clients. Update Intel® Core™ 2 Duo processor E6300. I have Intel® Core™ 2 Duo processor E6300 (1.86 GHz, front side bus at 1066 MHz, 2 MB Cache).His quiet old, so my questions are: 1. the question of whether I should upgrade my processor or buy a new one (or another desktop computer / laptop)?2 and if I bought a WF-2650 epson all-in-one printer and am trying to find a replacement for QuickTime so that I can download a video. I have a MacBook Pro computer. Where can I get something instead of QuickTime? How can I get my programs to run after re installing Windows XP? I had to Re install Windows XP operating system. Now my program file no longer run. They seem to still be present in the Program Files folder, but do not work. the most important is my cable modum so I can access the internet. I want to install msn email on my shelf corner how much will it cost I just bought a corner shelf and don't know how to set up msn email and I have msn Prime Minister that I also have to pay for this information This laptop is about to collapse total unretrieavable. I want to recycle, but first of all, I want to do a complete cleaning memory of the computer, all programs, etc. How this is done?Similar Questions
I am trying to use a client certificate to connect via CFHTTP a secure Web site and I'm getting a "403.7 - Forbidden: certificate customer required" error. I have correctly installed the Web site cert by following the instructions here:
http://www.TalkingTree.com/blog/index.cfm?mode=entry & entry = 25AA75A4 - 45a 6-2844 - 7CA3EECD842D B576
When I access the secure site using IE, I am asked to use the installed client certificate, and then I'm able to view the content secure without no 403 errors.
After completing the research question, I read in this post that CFMX7.01 does not support the SSL V3.0 protocol:
http://www.houseoffusion.com/cf_lists/message.cfm/forumid:4 / messageid:229870 / step: 0
Did someone using client certificates SSL V3.0 with CFMX7.01?
Is it a question of Adobe or java problem? Are there alternatives?
2. control of type advancedproxyconfig
3. type HTTPS
4. keep pressing enter to accept the value by default until you reach "measures to be taken when the HTTPS servers request certificate of the client during the handshake:" and change it to "get through the operation.
6. type commit to save the change.
Now, I tried to save this cert to my desktop Pc. After searching a lot about this, I found out how to copy the files cert9.db and key4.db on my PC, but now I don't know how to extract the certificate of the files. Using the command:
RSA < 0 > < some long letter/digit ID > < Email address > s ID StartCom Ltd.
Greetings,
tuxflo
SQL d Pk12util:. out.p12 - n o 'ID < mail_address > StartSSL Ltd.'
After you enter the password twice, I had the certfile out.p12 in the current directory and could import on my Firefox on my desktop.
Now I want to save this client certificate, but I don't know how I could export it to the mobile version.
Thank you for your question. I apologize for being a little late in coming in responses. If we are unable to find an answer, please post your question again once.
The HTTP status code is 503
The error code is 995
An ISP (ISP) is an organization that provides access to the Internet.
Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233
Mark
http://www.Cisco.com/en/us/products/ps9923/products_qanda_item09186a0080a39097.shtml
> 2.Click the wireless tab.
> 3.Click the subtab to access the wireless network.
> 4.Select prevent access to and allow the access keys.
> 5.Fill in the wireless MAC address which is filtered so that you can control what wireless client can connect because of the road.Maybe you are looking for