Client operating system VPN requirements
Hi all
Does anyone know of any problems with the help of Win98 and WinME to vpn in a pix? I have XP and 2K connection and works well, but whenever I use 98 or ME, the tunnel just sits there on "Contact the security gateway" and eventually times out. I would be there compared to not having the password correct or similar. I know that the details are 100% correct about the customers.
My config works for 2000 and XP machines so it must be (I assume) based operating system?
The pix has 6.3.3 software and I tried to recharge one of the ME machines of costs with all updates from MS with no difference in the result.
Any assistance received with joy and thank you for your time.
see you soon
Andy
Edit: Sorry - I tried customer 4.0.3.F more the last customer base 3. (and yes I realize and 98 are not the best choice of operating system but then I unfortunately can't change that)
see you soon
Hello!
Try adding a few new isakmp policies, eventually the customer and the PIX will manage negotiate the appropriate settings for the connection, because they can be dynamically negotiated by both.
Select the LOG option in the client.
Try to do some debugging if posible. Before debugging make sure your CPU usage is low with
HS the CPU usage
[No] debug crypto isakmp
[No] debug crypto ipsec
SH debug
See this document http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_configuration_example09186a00801e71c0.shtml
And finally and most importantly, it's my setup
partnerauth Protocol Ganymede + AAA-server
partnerauth AAA-server (host 172.16.101.1 pixkey timeout 5 inside)
access partner-tunnel ip 172.16.0.0 list allow 255.255.0.0 any
partner-tunnel ip 172.18.0.0 access list allow 255.255.0.0 any
partner-tunnel ip 172.19.0.0 access list allow 255.255.0.0 any
access partner-tunnel ip 10.10.0.0 list allow 255.255.0.0 any
allow list to access partner-tunnel ip 172.17.0.0 255.255.0.0 any
172.16.99.200 - reseller 172.16.99.230 IP local pool
Crypto ipsec transform-set esp - esp-md5-hmac TS2
Crypto ipsec transform-set esp - esp-sha-hmac TS1
Dynamic crypto map DYNMAP 10 game of transformation-TS1 TS2
Crypto card partner 20-isakmp dynamic ipsec DYNMAP
launch of the partner-map client configuration address card crypto
card crypto partner-map client configuration address respond
card crypto partner-ID client authentication partnerauth
partner-map interface card crypto outside
ISAKMP allows outside
ISAKMP client configuration address dealer outside pool
part of pre authentication ISAKMP policy 1
of ISAKMP policy 1 encryption
ISAKMP policy 1 md5 hash
1 1 ISAKMP policy group
ISAKMP policy 1 lifetime 1000
ISAKMP strategy 8 authentication rsa - sig
encryption of ISAKMP strategy 8
ISAKMP strategy 8 sha hash
8 1 ISAKMP policy group
ISAKMP life duration strategy 8 the 86400
part of pre authentication ISAKMP policy 20
encryption of ISAKMP policy 20
ISAKMP policy 20 md5 hash
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
reseller partner-group-pool of addresses vpngroup
vpngroup partners-Group server dns 172.16.100.2
vpngroup partners-Group wins server - 10.10.1.8
partners-group by default-field partner.com vpngroup
vpngroup split tunnel partner-group partner-tunnel
vpngroup idle time 1800 partners-group
password partner-group vpngroup *.
Tags: Cisco Security
Similar Questions
-
What operating system is required on a mac to install lightroom 5
Hi, can you please tell me which operating system I need a Mac to install lightroom 5.
Thank you
10.7.x
-
client operating system 64-bit would not start (32-bit host)
FreeBSD7-amd64 or Windows 2003 Server 64 bits (the two being "supported" OSes)
wouldn't start under VMWare Server 2 (VMware-server - 2.0.0 - 122956.i386.rpm on CentOS5). FreeBSD BTX loader would crash and NTLDR would say "mode 64-bit not supported on the current processor, try
32-bit version instead of this".
The system is a PE-860 Dell with 1 quad-core Intel chip what lshw says is
Xeon of Intel (r) CPU X 3220 @ 2.40 GHz
Intel's page mentioned in the FAQ and 1901 KB (http://compare.intel.com/pcc/default.aspx?familyid=5 & culture = en-US) claims EMT64 and VT are supported. I understand I need a update for the Dell BIOS (the BIOS is somehow something wrong to the VT CPU feature) or is there something escapes me?
If you consider any useful comment please assign points
---
VMware vExpert 2009
-
Y at - there no distinction between the "minimum operating system requirements" and nail systems supported? For example, the minimum list of operations required in accordance with the specifications of the printer 3835 8.1 Windows as one of the required minimum systems, without mention of Windows 10. Yet the system compatible for the same printer is given as Windows 10. For most printers, both the minimum requirements for compatible systems start with Windows 10. I would be grateful someone clarify the difference.
Hello
The minimum system requirements see General requirements such as the operating system, the required memory and the disk space and additional software requirements.
Operating systems supported only summarize the operating systems supported.
Youe taken printer supported on Windows 10, according to the list of the minimum system requirements or operating systems supported section below:
Minimum system requirements:
10Shlomi
-
How to get the operating system of the client formsweb?
Hi all.
I use Forms11g Rel2 and have the following piece of code on a trigger WHEN - BUTTON PRESSED:
Start
If get_application_property (operating_system) in ("MSWINDOWS"
, "MSWINDOWS32".
"WIN32COMMON") then
message ("Estoy en plataforma Windows...!"); take a break;
on the other
message ("Estoy en plataforma Unix / Linux...!"); take a break;
end if;
message from ("platform the client form (Formsweb customer: ' |)") webutil_clientinfo.get_operating_system); Break;
end;
If I run the form on my laptop from my installation in development mode, webutil_clientinfo.get_operating_system , he returned to Windows 7, which is correct.
Later when I put this form on the application server, which is a linux machine, it returns null.
Question: is this the expected behavior? Under very specific conditions, I need to know the client operating system running formsweb. Not Formsweb / forms runtime, which is get using get_application_property. Webutil_clientinfo.get_operating_system will do the work?
Best regards, Luis
Problem solved...! I noticed a few errors on the java console as follows:
network: cache entry not found [url: http://186.24.48.242:8888/forms/java/oracle/forms/webutil/clientInfo/GetClientInfo.class, version: null]
network: http://186.24.48.242:8888/forms/java/oracle/forms/webutil/clientInfo/GetClientInfo.class with proxy = DIRECT connection
java.lang.ClassNotFoundException: oracle.forms.webutil.clientInfo.GetClientInfo
Even if I correctly attached to the webutil library and classified under the Group of the object, I was not using the correct configuration on the URL section. The other config = webutil or a configuration named which included webutil settings correct.
Thanks anyway...!
-
Can I run RoboHelp 7 on Windows Server 2008 operating system?
Yes, I know that we are out of date, but not sure I can get to upgrade or not.
Thank you
Anahid
RoboHelp is not certified for use on any server operating system.
The license allows a single user on a client operating system, such as XP for RoboHelp 7. Not sure about Vista but it is not supported on Windows 7. It can work, and then you might find something broken. Your call on that.
See www.grainge.org for creating tips and RoboHelp
-
VPN-block end-of-life operating systems
Is it possible to configure the client AnyConnect or ASA to block some operating systems? End of support for Windows XP is April 8th and we want to deny Windows XP after the end of support date. Thanks in advance.
You can use the HostScan function for this. But this requires AnyConnect Premium and will not work with AnyConnect Essentials.
-
I plan to upgrade my OS to El Capitan. What are the processor speed and memory required for the operating system works well?
I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.
My last similar attempt on another machine resulted in a very slow computer.
Thanks, Ron
Apple says the following:
General requirements
- OS X 10.6.8 or later version
- 2 GB memory
- 8.8 GB of available storage
For best performance, I would say not less 4 GB and preferably 8 GB or more.
Your i5 is well able to support properly.
http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration
-
Original title: Software Assurance
We have the assurance of software on the operating system server & CALs client server. Our agreement expires in June 2013. Do we need to exercise our upgrade to the licenses before 2012 June?
Hello
Thanks for asking this question to Microsoft Community.
I suggest you check the Microsoft Software Assurance Web site for assistance.
http://www.Microsoft.com/licensing/software-assurance/default.aspx
Software Assurance FAQ:
http://www.Microsoft.com/licensing/software-assurance/FAQ.aspxIn addition, you can contact support by calling team: 800-936-3500.
Hope this information helps.
-
Original title: reboot problem
My computer crashed and after that I reinstalled everything I get is a screen when I reboot that requires my operating system. I never had this before. How can I get rid of him? It's gray and white, something like the safe mode screen.
Hello
Read the following article which can be useful:
To specify the default operating system for startup
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sysdm_advancd_startrecover_default_os.mspx?mfr=true -
I have a Windows 7 Ultimate active computer that was swarming (STRONGLY) of malware/virus/junk files/adware...
I think I have cleaned out, but want to do a clean to be sure install, but I have no partition recovery (may be erased by a virus?) and no recovery dick.
I went to the Microsoft website and entered my product key. He has been recognized as Windows 7 Ultimate, but when I had to choose a language, English was not available.
Any solution, or should I continue to use the computer and all hope is clean?
EDIT - I installed the windows 10 (using an ISO image) on Windows 7. I do not enter the product key when asked (the program said I could jump at this stage of the installation). Installation went well.
I then checked to activate Windows 10 - it activated without any difficulty.
I will now try a clean install...
For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.
It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.
Given that this option is no longer available, what are your options? See the article for more details:
-
I've seen other posts on this topic. Nothing seems to work, so I thought I would explain my situation.
The machine is new. Win7 64 bit company. The problem I see is that I try to load some versions of Visual Studio on the new machine. However, none of the discs auto-run using my local internal DVD drive. They all have a Readme file with the message "this disc contains a"UDF"file system and requires an operating system that supports the ISO-13346"UDF"file system specification."
I know that the discs are good, I used the on my old machine, and I can always use them on other machines I tested.
The real kicker here is that I can plug an external USB DVD drive... and then the local drive starts to read the installation discs! It's like making this action allows something else in the machine.
Also, I even restarted the machine mode of diagnosis (without external DVD drive attached)... and restart, the drive would read the installation discs. BUT when I do a full stop and then turn on the machine upward, the local drive gives me the same readme file. Again, it is as if something gets activated, and then reset to a complete stop.
I am at a loss of what to check then. Real head-scratcher, because I know the drive works and the machine can recognize the drive and even read installation discs.
I do not have the applications installed on the machine of DVD burning, so I don't think there is a conflict.
Any suggestions are welcome.
Thanks in advance!
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums so the problems occurring on Windows 7 Enterprise.
Hope this information helps.
-
I downloaded Windows 7 from MS with a liscence on a computer running Windows 8. I wrote the ISO on a DVD but when I try to read every DVD I see is a readme file that contains the text "this disc contains a"UDF"file system and requires an operating system
that supports the ISO-13346 "UDF" file system specification. "Former title: installation of windows 7 download
Use the following to burn the. ISO to a blank DVD file:
After graduating the .iso file, you use the Microsoft .iso to USB/DVD tool to create a bootable DVD or USB (requires a blank DVD or USB flash to at least 4 GB key).
You can also burn the. ISO natively in Windows 8 file:
-
old game system requirements for modern operating system
On the system requirements check of an old game, he showed the cd/dvdrom was slow (300 Kbps). How can I change the speed of cd/dvdrom on a windows operating system 7? And if it is importiant, the game, I am trying to install, I install via dosbox (a dos Emulator).
-Give more details of what is, or isn't, and include the name of the game.
"On the system requirements check of an old game, he showed cd/dvdrom was slow (300 Kbps).
Not sure what you mean - the disk requirements are lower than your CD/DVD drive speed,
or your drive does not have required gear.
-Kbp/s 300 seems a little slow, if it's the speed of your drive, because it is only equivalent to 2 X.
-I assume that the disc requires a drive with a minimum speed of 4 X?
Modern disks usually have a minimum of 4 X, so if the disc does a 2 X you may not be able
to do anything.
-I don't know where to change the speed, if possible. I thought the speed was fixed, or
determined by the media.Regarding BOX BACK. If you are not already used the DOS WINDOW, try to use D-Fend Reloaded to help
with the installation of the game in the BACK WINDOW.
D - Fend Reloaded: overview -
Hello my dear,
I need your help if you can as soon as possible.
My problem was unexpected, when I turned on my laptop computer and received the following message:
"Your pc needs to be repaired the application ot operating system could not be loaded because a required file is missing or contains errors.
File: \Windows\system32\winload. EFI
Error code: 0oxc0000185
You will need to use tools of recovery on your installation media. »
Here some useful information can by important for you:
* my laptop is dell inspiron 15R.
Operating system is windows 8.
* windows has been installed on the laptop (by the company) and I DID NOT CHANGE IT.
* I don't have a windows CD.
* The problem occurs the first time.
I am ready to give all forgotten information.
Help, please.
Thank you very much.
Original title: recovery
Companies who pre-install Windows on your computer usually have a generally accessible, integrated conservation program by rebooting and press a special recovery as F2, delete, or escape.
You want to contact Dell or refer to the manual of your laptop to find out how to start the repair process.
You can go to http://support.dell.com to discuss with their technical support directly too.
Maybe you are looking for
-
14 - J009TX: unable to display the photos in my pictures
Hello I just bought a new laptop with a DESIRE series intel i7 and Nvidia Geforce GTX portable. However, when I try to view ictures in my pictures, it tells me "This application does not support the specified contract or is not installed. I can see t
-
T420 graphic card appearing does not
Hi, I have a T420 that I recently bought, and the seller said that the computer comes with a NVIDIA NVS 4200 M graphics card. And no matter what I try I can't find anywhere. I went through: Device Manager CPUID HWMonitor BIOS (no mention of switchabl
-
Broken laptop screen Equium A110-233
Hi, I have a satellite A110-233, the screen is broken. I have attached an external monitor and it displays when the Starter until he got to the Windows logon screen and then it switches back to the laptop screen.Is there no workaround known solution
-
HP Pavilion H8-1151sc: HP Pavilion H8-1151se
This computer will work with a Pavilion usb keybord (will not use it to play program). What is the name/code of original keyboard/mouse.
-
I have a backup script (Robocopy) that looks like this:off @echoEcho «Copy of the files on Server1...» »REM xcopy "Z:\*.*" C:\Users\Apps\/c/s/r/d/y/i >: \Users\Apps\taddxpercopy.log/SECFIXs C:\Users\Apps E:\LIVE/e R:1 /W:1/v/FP ROBOCOPY/MIR/sec The b