Clip disappears when you synchronize the audio feature, Bug or am I doing wrong?

Similar Questions

• Half the Office disappears when you unplug the external monitor

  I have a MacBook (early 2011) with a single office shared between two monitors - with one hand on the internal screen and the other half on a Dell 23 inch. The Dell is my first when I use both at the same time. Until a few months ago, when I unplugged the external monitor, all windows automatically appears in the monitor to the laptop, including the menu bar and dock.

  After an operating system upgraded a few dos systems (I'm on version of El Capitan.6), when I unplug the screen seems not to register - in other words, the left side of my office, including the menu bar and the dock, and all the apps that were there just to disappear. So my laptop seems to think that the other view is always connected and direct, unless I restart with the detached monitor. (I unchecked 'Displays have separated spaces') in Mission Control.

  Is that what I can do to force the Office to redesign the internal screen? (Note that the display is a Dell S2330MX, which seem not to support any Mac OS - so who could answer the question here.) Thank you

  I've known who issues from time to time, try to close and reopen the lid, which needs to redraw your office.

• Error when you use the Group feature

  Oracle forms6i
  
  Hai
  
  While I compile my coding it will compile correctly, but when I tried to run I revealed an error in the function of group
  
  my code is
  
  
  If (NTC <>0) then
  Select the BAR code, RESPONDENT, OUTTIME today_bar, today_in, today_out from dail_att where BARCODE =: bar code
  and ATTEND_DATE =: bardate;
  Update dail_att set outtime = max(:bartime) where barcode =: bar code
  and ATTEND_DATE =: bardate;
  
  on the other
  If (cnt2 <>0) then
  
  Select RESPONDENT, OUTTIME in yest_in, yest_out from dail_att where BARCODE =: bar code
  and ATTEND_DATE =: bardate-1;
  
  If (yest_in is not null and yest_out is null) then
  Update dail_att set outtime = max(:bartime) where barcode =: bar code
  and ATTEND_DATE =: bardate-1;
  
  on the other
  insert into dail_att(barcode,intime,attend_date)
  values (: Barcode, min(:Bartime),: bardate);
  end if;
  on the other
  If: bartime between 0100 and 0630
  insert into dail_att(barcode,intime,attend_date)
  values (: Barcode, min(:Bartime),: bardate-1);
  
  Update dail_att set outtime = max(:bartime) where barcode =: bar code
  and ATTEND_DATE =: bardate-1;
  
  on the other
  
  insert into dail_att(barcode,intime,attend_date)
  values (: Barcode,: min (Bartime),: bardate);
  end if;
  end if;
  end if;
  
  while I'm trying this groupfunction it throws error while I use seen tell me how to use the Group feature and where
  to use
  
  Regadrs
  
  Srikkanth.M

  Srikkanth,

  For this you need to calculate the max outside of the update statement and then use this value in the update statement.

  The bartime is a control in the block?

  If Yes, then you need to find the max manually, and if it isn't, then you can write a sub query to find the maximum value.

  Kind regards

  Manu.

  If my response or response from another person was helpful, please mark accordingly

• Start menu disappears when you use the menu

  When I click on the Start button on the start menu, the menu will open, but after a few seconds it just closes. Account other start menus work perfectly well.

  Hi Danny81212,

  ·         Have you made changes on the computer before this problem?

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 2: It seems to be corrupted user profile. Follow the steps in the article on how to fix a corrupted user account.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• Why my video clip disappears when it reaches the last frame?

  Hello

  I have a clip on the stage with the length of 600 images. I put a code in actionscript 3 "stop();)» at the end of the film. It stops when it reaches 600 frames, but it disappears from the scene. That I don't want. It should stop the animation, but will remain with last fram which has a welcome message.

  How can I do this?

  I should stay visible, so you must be beyond the last image or the movieclip somehow.  Maybe chronology that occupies your animation does not go as far as chronology.

• When you install the module FEATURE, there is a warning

  Ghostery is an add-on recommended firefox add-ons recommended page. When I try to install this add-on, I'm waring. In this case, I want to know what is "Featured" add-on? (I think that by Star Add on, they are fully verified and approved by firefox) If they are not entirely true, why they are featured modules? If this is not the case, why are they under recommended modules?
  What is c? I am a user common & confused now to install this add-on or not? Please, someone to guide me.

  Oh oh, I see now, sorry for the confusion. This warning is Firefox that you want to install the add-on of dual control. It's not mater if it is a recommended add-on, or a new brand. Firefox just wants to confirm that you HAVE asked to install the add-on, not a malicious Web site. So, if you want to install the add-on, go ahead and click on "install now". It is just a feature of security built into firefox and has nothing to do with the add-on. If you are sure to continue.

  Once again, my apologies for the confusion. Your screenshot cleared up he instantly.

• Text box disappears when you use the text tool

  I downloaded a model for a leaflet to 3 parts and I create a text box, as soon as I take my finger off the mouse button, the text box disappears.  If I type, the text appears, but it has a colorful background.  If I switch to the selection tool, the text box is once more visible, but as soon as I hit the text tool, the box again is no longer visible.

  I guess it may be a setting somewhere in the model (this doesn't happen to me when I'm working on one of my own files) but I can't find the setting that controls this.  Any ideas?

  Thank you

  What color is the highlight? Rose, a font missing, green means custom tracking/kerning. These ar the two that you're more likely to see applied to an entire line. Yellow is substituted glyphs (typically ligatures, but it could be all cpas or samll so caps) and colors for the kepps violations there, but I don't know them off the top of my head. All these can be turned on or off in the Composition section of the preferences.

• The cursor disappears when you press the happy.

  When I type in Microsoft Word and on Web sites, if I push the caps lock button, I have to click the back arrow on site of th when I was typing. I tried to run the Microsoft Fix It and it found nothing. Please help, I am constantly typing on my computer and having to click back on Gets a lot of your time. Thank you!

  Halima,

  I contacted Dell Support and they had me restore the computer to factory settings, because everything else they've tried has failed. After setting this back to factory settings, it worked very well and no problems so far. Thanks for you advice.

• Imported text formatting disappears when you change the font in the character palette.

  Something seems to have changed with my InDesign, and I don't know why. Here's what I used to be able to do.

  I could import a word doc into a text box. This text would be bold italic, regular, fonts. I choose the text box, and then change the font using the character palette by changing just the upper box of the police. For example, if the police imported as Helvetica, but I wanted to be all Futura, I check the box and then simply type Futura and all bold Helvetica would become "BOLD" Futura, and italic Helvetica became Futura Italic, etc.. I didn't have to select each row.

  Now if I try to do the same thing, when I select Futura, it changes just ANY text to regular Futura. I lose all the precedents of the formatting that was imported from the word doc.

  I hope this makes sense.

  How can I go back to the way it was?

  Help, please! It's maddening! Not a big deal to design unique flyer but when laying on a book, it could represent DAYS on the project.

  Thank you!

  I fixed it. It was so simple. I just stumbled upon the answer.
  All I had to do was change the search option using this drop-down list. (See the image)

  

• Images that disappears when you insert the header/footer

  Can someone tell me why this is happening? I can't see differences or the simularities in the pictures that explain such behavior.

  
  Here are the documents created in Word, and then saved in Adobe PDF format.

  In fact, I found a solution to the problem. I took the "Enable accessibility with PDF" check marked slot acrobat-> preferences in Word, before the Save as pdf. Seems to work.

  -Merete

• Why the data disappears when you click on a text box on a page of a completed form on?

  Adobe Acrobat 9 Pro on Windows 7.

  Installation: I created a doc of bid that allows the end user to complete the first page (request for quote) and auto information fills in the next 3 pages, carrying contractors names and info to separate bid documents.

  Each of the contractor bid documents must out individually, so I check out them for distribution.

  The problem is that the details of the offer requires sometimes scroll down in the text box, which has been activated and works well on the original document, the information disappears when you click the check box in the checked out document.

  The original Document ('Scope') field properties:

  

  Original Document - scrollbar behavior works to read all content info:

  

  Extract Document - before clicking the "range".

  

  Extract Document - after clicking on the "range".

  

  Extract Document - properties of the field.

  

  What is blow the information contained in the extracted document when you click on the text box? This does not happen in any other areas of text without scrolling.

  Help!

  

  I have never heard forward and cannot reproduce them. What the police that you use for the multiline field? It would be interesting to see a sample file if you can put a somewhere.

  Something that might work is first export data from form (in FDF/XFDF), then extract the pages, reset and re-import the data in the page.

• problems to capture the audio layer when you import the m2ts files

  Hi all, I'm new on the side of the entire video editing and so would be grateful for the help.

  I just bought a camcorder Canon HF200 HD, and a Sony Vaio notebook that came with Premiere Elements 7.0 preinstalled.

  Last month I've been shooting sequences and down just to try to change everything and set up a DVD.

  The problem I have right now (and I've just started using the program, so everything is new for me) is that while I seem to be able to import the m2ts file format in which my camera records, only the video is imported by first - no audio (it reads the file ok, no errors appear, but when I go to review images there is video but no sound).

  I can play all my videos in Windows Media Player very well, both video and audio.  So it seems that my machine is able to read the files correctly in this program.  However, it seems that the audio drop out when I import the file in first.  The program was pre-installed on my computer and when I have a look at the audio settings, it doesn't seem to be a possibility to change the settings to something different.

  So far, I've spent a long time googling and trying to find a solution, but without any joy immediately.

  Enjoy the anyone can offer any assistance.  Is it just a simple setting I need to change?  Or I have to somehow convert the files in a different format before Elements 7.0 can read?

  Thank you.

  Jeff

  the machine I have appear to be consistent with the specifications required by PE7 (and given that it came with pre-installed PE7 which should be the case).

  There are two things to consider:

  1.) edition of most of the images, especially material to SD

  2.) editing AVCHD, currently the most demanding of all popular video formats to edit. That's what you have.

  Now when you launch the pre, you get a splash screen. There you can open new create a new project, open an existing project that has been recently opened, or open a project by browsing to it. We can also leave.

  In your case, you go again and when the dialog box opens, choose the preset for AVCHD w / DD 5.1 SS Audio.

  Also note, that in the Edit Mode, there are two Modes of display (access via two icons to the left of the lower panel), view timeline and sceneline view. For DD 5.1 SS Audio Clips, you will find Timeline View Mode to be the best. Now, you can switch back, but the timeline view Mode will give you infinite control. It is estimated that change the most programs use, and most publishers use.

  Good luck

  Hunt

  PS - I highly recommend Steve Grisetti book, The Muvipix.com Guide to Adobe Premiere Elements 7

• When you use the feature of period of Parental controls for my child's account, the session is saved, and although very convenient for the user, it's boring for the parent. How can I disconnect this acct when it expired already?

  When you use the period of Parental control feature, acct of my child receives the 15 min and 1 put min warning, and then the closure of the session. However, any Web site that it has a really annoying music keeps playing even when I connected under my account admin the only way I can disconnect the acct with Parental control game is to restart my whole machine. Is there another way to disconnect the user standard acct with this feature of limitation in time game? THX.

  Hi marion_librarian

  Thank you for using the Microsoft Answers Forums!

  This is the problem of design, the session remains active in the background, however, so the next time they connect, they can pick up where they left off without losing any of their work.

  In case if you complete the program, there is no these settings in the parental control to close the program, you can disconnect the program using the Task Manager.

  Check the link for more information:

  Explore the features: Parental controls:

  http://www.Microsoft.com/Windows/Windows-Vista/features/parental-controls.aspx

  Set up Parental controls:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  NOTE: When you log in as an administrator you can connect to the wide of other users. Follow these steps to log on to the account with Parental control and/or any other user.

  1 click-right on the taskbar and open the Task Manager.

  2. Select users

  3. right click on the user name you want to disconnect, and then click close session.

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The files 'disappear' when you add a period to a folder or a file name in windows through GUI

  The files 'disappear' when you add a period to a folder or a file name in windows through GUI

  I don't know if it's a bug, but certainly doesn't seem like it should be the case. I tried on both 64-bit and 32-bit on windows 7. Does not make this error on XP or vista.

  Can someone explain to me what is happening?

  To reproduce, in windows 7 make a file or folder, and THEN add a ".". (period) to the end of the name of the file and look at the file "disappear". It's still there, just need to refresh (F5) and it reappears (w/o of the annex "." because it's an illegal file naming convention).

  I tried to do the same thing but through command line and it always auto corrects names of files to the conventions, and correctly, it remains on the GUI, so I think that the problem is related to the graphical mode of name change

  -Favre a. Reid

  Hello

  This seems to be a bug with Windows 7. We really thank you for this bug in our opinion. This will be the team of developers. Thanking you once again.

  Concerning
  Anthony.

• All windows disappear except Composition and timeline when you drag the time indicator current (CTI)

  All windows disappear except Composition and Windows calendar when you drag the time indicator current (CTI). When I let go of the mouse, all the windows reappear. I'm sure I've accidentally changed a parameter overview, but I can't find where this setting is. I want just all the Windows I normally opened to stay there while I drag the CTI.  Any ideas how to solve this problem?

  I have NVidia Quadro FX 3800, driver version 341.92, which is one of the most recent drivers, but that made me think. In the NVidia Control Panel, I checked manage 3D settings and restored all global and set default settings. Now it does not work properly. I think that I have stayed a while to solve something for a different application, and who touched somehow AE. Thanks for the help!