Clip Plus / comparison of the triggers?

Similar Questions

• Sansa clip plus and itunes - how to transfer files

  I'm really ignorant, but I would be very grateful for the help.   I did research on this topic here but do not understand the answers...

  Basically, I use itunes on Windows XP.  I just boughts liked a Sansa clip.

  I don't know even what kind of files I have in itunes - they are mostly ripped a CD. I guess they were mp3s but looking at recent postings here it looks like they may be something else (ACC file extensions?).   Anyway, I was fiddling around in itunes but have not been able to verify what are the types of files ('cos I'm ignoring it!)

  Earlier today I just copied some of the songs in itunes, go to Windows Explorer and paste in the section music to the Sansa Clip file.   They played very well...

  Then I went and deleted these files on the Sansa Clip Plus, because they were just an experiment.

  Then I went back to itunes and copied the files over.   This time, when I went to paste the files in Sansa Clip Plus in Windows Explorer, I found the option to paste is grayed out.

  I'm stuck and would be incredibly grateful for the help.   As you can from it of the mess that the above, any guidance I get has to be pretty basic.

  the easiest way is just to look at the files in windows Explorer. go to documents, then music. the music folder to itunes folder. That's where itunes stores all the files. you need to configure the computer to display file extensions for known file types. Find your MP3 files and copy them from windows Explorer, then glue them to the clamp.

• Today, I installed serif photo plus, and got the crazy computer, I uninstalled this program but I can't delete the photo over the toolbar, how to do?

  Today, I installed serif photo plus, and got the crazy computer, I uninstalled this program but I can't delete the photo over the toolbar, how to do?

  Thank you, but I had to go to safe mode and to the restoration of the PC, but it has been resolved

• Satellite L500 - where can I get the clip of restraint for the keyboard?

  Hello!

  A few weeks back, I bought a L500/00U, brilliant.

  Only problem so far, last night one of the clips of restraint on the broken keyboard. It was the SHIFT key that originally broke out, but because I use a lot the SHIFT key, I swapped retiner clips with the key on the keyboard.

  Anyway, my question is, how do I acquire a new retainer clip, I really like to avoid to return the laptop to the store, only just got all my software after a clean install of Windows 7 Ultimate RTM x 64.

  Thanks in advance.

  If the keyboard or else be replaced, why you think you lose something of the HARD drive?
  If technicians share the keyboard it has nothing to do with the OS preloaded with.
  Only the features will be tested and that s it.

  OS should not be installed again.
  Contact the nearest Toshiba authorized service in your country, explain the situation and they will help you in this regard.

• How can I delete several clips at once from the timeline

  How can I delete several clips at once from the timeline?

  Thanks, Dan

  Shift-click or command-click to select if they are contiguous. Then press the delete key.

  Or select them and use the keyboard shortcut command + X.

  Or select them in the Index of the Timeline and use the key DELETE or command + X.

  Russ

• HP Pavilion 15 laptop: press the Plus sign (+) on the numeric keypad is too sensitive

  Press the plus sign (+) on the numeric keypad is so sensitive that it is like it is stuck. I have to tap it or even touch it, just gently move the computer or touch the computer around the + key is enough to activate, which translates by +++.

  How can I fix?

  Thanks in advance!

  Hi!, @DMercier:

  ¡Bienvenue, on the Forum!

  Solutions for the problem of keyboard... http://support.HP.com/us-en/document/c03738933

  Portable computer key stuck

  If a key is physically stuck in the down position, you should not have to replace the entire keyboard. Many keyboards have keys that can be removed by inserting a knife to butter under one edge of the button and gently lifting upward on the upper and lower edge. After having removed the key, using a buffer with alcohol, clean the underside of the key and the key on the keyboard slot. Put the key in the snapping it back in place.

• Why is relativeInitalX value not taking into account the triggering delay? using scope OR with the PXI-5124

  Hi all

  play with a digitizer PXI-5124 in a case of PXI1042Q with a PXI8110 controller that runs labview 2012 (latest updates) with the latest version of the driver NIScope.

  I put in place an acquisition of off-delay (by assigning the triggering delay, for example 20us) which works very well (I can tell by the signal I get delay control works correctly), but the data returned in the info wfm cluster (using the 2D version of niScope I16 Fetch) does not have this delay.

  Description of the relativeInitialX within this cluster indicator indicates "is the time in seconds between the trigger and the first sample in the acquired waveform" but its never to return something around 1E-9 independent of trigger delay. Surely the relative initial x should reflect the triggering delay?

  I'm doing something wrong?

  Thanks for your help!

  So, I made a screenshot of the image in the section "Trigger Delay" link I sent you.

  

  Meaning of the symbol:

  T0 = original moment of relaxation

  T1 = time to trigger used in the acquired record (t1 = t0 + TriggerDelay)

  T2 = time of first sample in the record of the acquis.

  RX = relativeInitialX = t1 - t2

  Response to previous reviews

  «I understand what you're saying - so basically, if I want to know the delay of my trigger for the first sample in the record, I just add my delay time value to the relativeInitialX.»

  • Close, the delay of the original trigger (t0), for the first sample in the record (t2), would actually be TriggerDelay-relativeInitialX

  «.. . Nowhere does graphically describe where is the relative value of initialX real. »

  • Right, relativeInitialX is not a timestamp, so it is not a place on the timeline, it is the difference between two timestamps (t1 and t2 above), where the relativeInitialX name.

   

  "The trigger"record"is the straight line in the Middle, so expect relative to - 1/2 initialX record length?

  • Almost correct, because the reference trigger is relativeInitialX to the position of 50%, will be the time in seconds for 1/2 the record length. (i.e. If the registration has been long relativeInitialX, 2s = 1 s).  RelativeInitialX will always be the delta time between the trigger (t1) and the first sample returned in the record (t2).
  
  
  • For example using the picture above: If t0 is 10 sec, Trigger Delay = 3 sec, SampleRate = 1 kHz, = 1000 record size.  This means that t1 = 13 s.  Our record is long of 1s (1000 points to 1 DC between each = 1 s), if t2 = 12.5 sec.  If away from all these moments are absolute time, as the timestamps.  So relativeInitialX = t1 - t2 is 13-12, 5 = 0.5 sec.
  
  
  • As a side note, the reference position should not be 50%, you can configure to between 0-100%.

  Time not yet discussed record attributes

  I don't want to make you more confused, but there is another useful attribute in the waveform info that we've not yet discussed and its AbsoluteInitialX.  Starting from the NOR-SCOPE help file:"absoluteInitialX is the timestamp of the first sample of recoveries in seconds..." "So, using the above image, absoluteInitialX = t2.

  I hope this helps.  If a part is still not clear, let me know.

  -Nathan

• Comparison of the results of the performance and the sum of the sum of array elements

  I did a comparison of the performance of "Add table" with 2 other methods (an Add elements and function of ddot BLAS) to see who was the fastest and also to compare their results, given that I was watching a few slight differences.

  Conclusions
  BLAS ddot's quicker (just a little), then add items, then add it in a loop of table

  BLAS ddot and add items table give identical results almost all the time.

  I don't know why add items in a loop manually gives a slightly different result. I understand there are any rounding due to finite precision errors, but why is it different for the 2 other methods?

  This classic of digital computing: the quality of the result depends on the order of operations.

  A simple example is the calculation of a * b / c with a, b, c equal to 25, 200 and 100 respectively. The result should be 50, but if a, b and c are U8, the result depends on the order of operation, as shown in the example below. DBL and data non-entier, the difference is of course that much smaller, but still there are!

  

  

  In your case, the difference also stems from the order of operations:

  -in the table add-in, the product of all the elements is calculated first and then the elements of the array are added.

  -in the loop, the addition is performed after each multiplication.

• How can I make the comparison of the two string one by one

  Hi all

  I'm new in labview and I'm stuck with the problem.

  I have a huge text with a different pressure values in different ports. My goal is to find the average value of the two ports and the dP and this value, I need to find the max value of dP.For that please see the attached VI. and see the structure 1st case of this home VI. This I already have.

  [I first hypothesis structure I compare the port 103 and 115]

  Now that I was for 2 ports and now I want to do a calculation for the comparison of the two ports but labview should do automatically, for reference, I have attached the text file.

  [Now, I want to compare 103 & 115 104 & 116, 105 & 117 automatically a]

  Please see the nd structure 2 for that. (in the first case structure I put table 1 d of search function to find the location of the port column but I manually write the "103" Port, now I want the labview automatically read the port of 103, on port 104 and calculate the average)

  He would be grateful if you can help me.

  I press the run button and push the button highlight to see execution. And I found something wrong.

  In the second element of research case structure function read the location of the column, but after identyfied the number of the column, the message not to the upper structure and the calculation has not started. Computing began when he reads the element and passes the final item column, then the calculation started...

• Zip clip is impressive, but the screen is sideways

  I recently put to date of a Clip + to a Zip Clip, and everything is even better than before, except that the screen is sideways to Polarized Sunglasses. Any other portable device I own (phones, MP3 players, tablets, etc.) appear to have installed their screens with glasses polarized in mind, but I have to rotate the Clip 90 degrees Zip in order to see the screen with my glasses.

  I know it's a longshot, but if I open the Zip Clip and physically rotate the screen, is there anything in the firmware that allows me to rotate the screen 90 degrees? If not, can anyone think of a way to fix this problem?

  
  

• For sansa clip plus travel charger

  Hi, im newbie here! I would like to ask about a travel charger which is safe for my sansa clip plus. I have two things here:

  a. creative zen v more charger, spec: input 100-240VAC / 50-60 Hz, 0. 3a Output 5V = 1000mA

  b. charger RIM, spec: input 100-240VAC / 50-60 Hz, 0. 3a Output 5V = 550mA

  That is appropriate and safe for my player? Thanks in advance

  
  

• 'Versions of the application and the database do not match' on the comparison of the annex

  Moved the database to a Server 2003 to server in 2012.  This has been the only change PM receive the message "the application and the database of the versions do not match" when they try to make a comparison of the annex.

  Thanks for your help.  You have provided very concise solutions to my problem, I ended up having also do the following:

  Trip, click the password in the admim.cmd to ensure that the password has been set successfully and deleted the file BREBootStrap.xml (let it recreate itself)

• The comparison of the annotation date

  Hello

  I need to compare the date of the day + 15 d Date read annotation of VM.

  Here's the code for today + 15 days:

  $Date = get-Date-format ' dd/MM/YYYY '.

  $Date = [datetime] $Date

  $inTwoWeeks = $Date.AddDays (15)

  Here the output: 2016/06-16 00:00:00

  Here the code to get the date in the annotation:

  $expiryDate = $vm | Get-Annotation - CustomAttribute "MACHINE_EXPIRY_DATE."

  $expiryDate = [string] $expiryDate

  $expiryDate = $expiryDate.replace ("","")

  $expiryDate = $expiryDate.Trim("MACHINE_EXPIRY_DATE:")

  Here the output: 31/12/2014

  How can my question, I convert the second exit to make a comparison with the first release?

  Kind regards

  Fred

  You can use $expiryDate = Get-Date $expiryDate to convert $expiryDate into a datetime object, which you can compare to $inTwoWeeks.

• Can I save clips short, renowned for the active project folder in 14 elements?

  Hello!  I have a ton of renowned, short clips in a project I'm working on that.  Problem is, I have change the longer movie clips go ziping up to the far right (off the monitor), which causes a lot of blue air here because I get what I need.

  And a lot of my audio clips (narration) took off for the hinterland law-neighborhood, lost of the workspace until I go through the laborious search for them.  Seems to me that it wastes a LOT of time.

  Can anyone help?

  I'm not sure of your narration. I think that we need to solve the problems that as a separate issue.

  But here's how you create small clips of a longer clip:

  (1) define the components panel of project for the display of the list by selecting it in the Panel Options in the upper right corner of the Panel.

  2) double-click your videos in the active project (before placing on your timeline).

  (3) in the monitor of the Clip, the points value and exit to set your short clip.

  (4) drag this short clip from the Clip monitor into the active panel. It appears as if it were something new, shorter.

  You can do as many segments of this clip for as long as you want.

  There are also automatically that can work for you. Once more, make sure that you are in list view. It works as well in grid mode.

  Right-click on a clip in the active panel of the project, and then select Execute Auto Analyzer. This will create a new folder in your project assets with the longest clip automatically cut to shorter clips, based on changes in the content.

• Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem

  Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem is it gets rid of color and shows that the peak through the text.  I wanted a draft of the text with the picture.  Is this possible?

  Thank you

  Peter

  You're welcome, Peter.