Clips of the video choppy after export to the formats .m4v.

Similar Questions

• Video garbled after export - CC Pro encoding

  I tried to export a file that is on Adobe first Pro CC 4000 MB; It is a H.264, 1080 p 23.976 FPS. The first time, it has exported the video was completely garbled. the second time half of the video has played well, and then it began to falter and he was completely jammed after. The audio works perfectly, it's just the video once it's coded, does not play well.

  I shot with a DSLR Canon 1080 p 24 frames per second. The files are MOV.

  I don't know what is happening. is this a bug? When I just changed, I noticed that my video editing flickered when I played it for a while. Does this mean that my file is corrupted? Should I copy and paste to a new sequence?

  1038 is that still a number of problems for MPEG-based media.  I recommend you copy and paste all your clips in a sequence corresponding to your support.

  Once that is done, try an another export.  You can add a crop 20 pixels high, and down in the export settings to get the desired proportions.

• Video jumpy after export Quicktime Movie of PS CS4 Extended

  I am producing a training video for short-term work.  I created my entire movie in iMovie ' 09 and she had desperately need a few arrows and text in order to clarify some more technical aspects.  I've exported as a Quicktime from iMovie file and imported in Ps CS4 extended.

  After having finished the mounting, I chose to export my video, once again as a Quicktime movie.

  The export is complete, and when I went to see my movie, he was extremely nervous.  Watch the online time on the bottom of the Quicktime screen, I noticed that he was jumping in several intervals of seconds.  The audio sounds like normal, but kept the video freeze and interference.

  I tried to re - export the video with Quicktime Animation settings, and Frames Per Second to know.

  No difference.

  Any ideas what I am doing wrong?

  dmisita wrote:

  Marian-

  It's 50-50 live video/ultrasound gray scale clips.

  I used animation because I was told that it was the most without loss. I wanted to not double compress my video too.

  The animation codec is lossless, but it works best on the flat areas of color (like animation 2D, The Simpsons, etc.). I don't think that it handles live action or else noise. The ultrasound imaging can be quite noisy. The nervousness could be the animation codec choke in noisy real action?

  If you don't want a double-compress, you should worry about compression far upward flow. Looks like iMovie gives you already a highly compressed h.264. You could try exporting from iMovie to the highest possible bitrate video (= less loss).

• Video game after export Epub or pdf

  Really need help here!

  I did a project ebook with Indesign CS6 and plans to put some interactive videos that can be played in the ebook. However, after that I followed all the instructions online to place the video content in indesign and export as pdf interactive or the Epub format, the video, I placed cannot be read and even show on Epub file.

  Could someone help me solve this kind of situation? Is there any setting I have to do and I have only not for the export of interactive video content?

  Thank you

  Here are my 2cents...

  I take your exported epub and try to load it on an iPad and see if you can see the video here.

  I read in the forums that ADE will not play videos right now because it's not epub compatible 3.0.

  Good luck.

• Video flickering after export [first CC]

  Good night

  So, I don't know how to solve this problem: whenever I visit my media, it makes everything flickered and with noisy display.

  Overview of the AME watch media are ok, but when it is rendered entirely and I run it, it bugs, like the image below:

  

  I use Windows 7 and sequence settings are: Quicktime h264 1080 p 24 frames per second.

  Can help someone, please?

  Thank you.

  No it's not a bug: its a user error.

  As I suspected: it's not 1080 p, you did all interlaced (bottom field is for SD)

  Post a screenshot of a music video in MediaInfo to treeview.

  You need to reset the parameters of your sequence and export of settings

• video problem after export to HTML

  I copy integrate youtube video code and paste on the muse of adobe. I can listen to video excerpts. If I export to HTML, and I opened to index.html on export folder, I do not see why video? Help me

  Please send fix for me

  [email protected]

  Thank you

  Some HTML embedded (like youtube) may not work in a browser using the file protocol. Here's a similar thread - http://forums.adobe.com/message/5567897.

  Thank you

  Vinayak

• Poor video quality after export

  I used the brightness and contrast and color corrector three way to edit. When I export, I lose almost all of the color quality. I tried QuickTime, H.624, and a number of different Codecs and it always comes out the same. I pushed the rate all the way upward as well. I don't know what else to do

  I discovered that the problem was the monitor settings when you switch from laptop to monitor

• What is the difference between the formats .m4v and .mov?

  I recorded a video of 18 seconds on my iPhone 6 p and sync Photos on my mac (El Capitan).

  When I try to export this video of Photos on my hard drive, Photos gives me options for

  • Export 1 video...
    • Selection 4K output gives me a 24.3 MB file with a .m4v
  • The Original unmodified for 1 video export...
    • Gives me a 39 MB file with a. MOV extension

  I want to store this file on a disk hard in case I want to change it in the future. What storage option gives me the most flexibility and the best resolution? MOV file is larger, but 4K does not give you the best picture? The only video editor that I use is on iOS and mac iMovie.

  (18 "video is just an example. What I'm really dealing is a 15-minute video which is > 800 MB.)

  Thanks for any help you can provide!

  MJ - lee

  Hi, mjlee,

  For your application, I would only export the unmodified Original.  File more voluminous, but of better quality and more flexibility to edit later.

  Yes, 4K gives a beautiful image.  But if you go in the m4v form you'd be compressing considerably and thus loss of quality.  Then, when you change it and new made, you could be compressing more.   Whenever you visit, you lose the quality.  In addition, edition would be not as accurate due to compression Group of Pictures.  So, if you can get an unmodified original .mov, I would take this option.  Your unmodified original is going to be a 4K movie much less compressed you can change and go to as high a quality as your application is capable of.

  Best,

  Rich

• Video integrated Youtube is missing after export to HTML

  I'm having a problem with the onboard video, I put in my site.  It appears so fine and everything works in preview, but after export to html format to download the embedded video is no longer there.  I don't have this problem with earlier versions of muse and I think it's a bug. Does anyone else have this problem? Can it be fixed?

  Hello

  Take a look at this thread where this has been answered: http://forums.adobe.com/message/5770863

  I hope this helps.

  See you soon

  Parikshit

• Problem: video downgrades the quality after exporting

  Hello world!

  IM new and this is my first question on the forum.

  Now, I created 10 succesful videos with Adobe Premiere Pro, editing Gopro videos 1080 p 60 fps.

  My new video, I started using my phone Samsung Galaxy Neo S3 content.

  The problem: after exporting my video, the quality of Gopro videos is like 480 p, but I still want the quality as the original, 1080 p 60 fps.

  What I need to do / how can I solve this problem?

  Relevant information:

  Laptop specs: Windows 10 960 M from NVIDIA, Intel core i7.

  Export format: H.264.

  I tried already rendering in modes: Youtube, Vimeo 1080, Match source 1080HD high flow, I ticked the box "maximum render quality".

  But nothing is done, the quality of the videos Gopro changed as 480 p after the export of the video.

  Please help me.

  Although I have not any more wise, I found a solution on Youtube.

  In my calendar, there is a yellow bar. I had to click "sequence" and then "render outside". Then the bar turned green.

  Then I had to select the export mode: HD 1080 p 29.97 fps.

  Then, as in my first picture, you can see "basic video settings".

  You can scroll down here, and there is also a "fps rate" which was 30 (automatic).

  I had to change at 60 frames per second. It is also recommended to check the box "made to maximum depth" in the audio and video tab.

  The size of the file push double (200%), but the quality is good as it should.

  I want to thank you for your efforts and help.

• How to export a short video clip to the timeline of EP 13 on my HDD to be used elsewhere?

  I would like to copy and export a short video clip from a video on the timeline of the elements first 13 full length so that I can use it in a different video. Any advice would be appreciated.

  Brian Sweeney

  "Work area bars" are circled.  Him are normally stationed at the beginning and at the end of the timeline.  Drag them there where you want, and then check out.

  Largarath codec is not included in the pre, it is heavy, and you have to install it yourself.  Treatment of H.264 is usually more than "good enough" unless you have pictures very critical.

  

• Export the clip with no video, audio only and keep the timecode

  I have transcribed for a documentary film clips. There are many of them and my transcribers using a program that can use the timecode of audio and video files.

  We are Dropboxing so I want them to be just audio files, but I need the timecode to stay on the clips when I export the audio.

  So far he strips and all I get is life.

  The original videos are in. MTS format. They import in first CC very well, but when I export the audio the initial timecode disappeared.

  The other option would be to compress the video and the watermark, but the time code disappears when I do that too.

  I think that I get it.

  You want just the files as small as possible. Right? That's why you just want audio?

  Well, rather than do without the video completely, just to reduce the flow of something terribly weak, where the video is barely able to be seen. You want to export to a format that the program can handle, like Quicktime. But where I could export to 25 Mb/s, you might be able to export 1 Mb/s. The video will look terrible. Well, so what? Who cares? Right?

  But there the timecode.

  When their web page says they can accept different audio formats, I don't think they hear audio by itself. They mean that the audio in the video stream may be audio AIFF, WAV, AAC and MP3.

• Playing several clips video one after the other on the main timeline

  Excuse the probably simple question but I'm just starting with Flash.

  I imported a few trailers directly in flash and saved as video clips.

  I want to be able to insert these clips on the main timeline and play one after the other, by repeating once they all played.

  In the main timeline, I put one layer for each clip and a keyframe where the clip is inserted for each layer.

  When I go to play the flash file, is to show the first frame of each movie file and before the first frame of the next movie file.

  What should I do to make the entire movie file flash game in this specific context before moving on to the next section where is the following file in the sequence, then to play all this film?

  Sorry for what is probably a simple thing to ask.

  Thank you

  Create a new layer actions on the timeline stop() and the main square. commands on this layer in each frame where resides a movieclip.

  In each clip, at the end (last image) you mean the main timeline to play(); While it moves to the next section (where it stops because of the stop() commands you add).

  If at the end of each movieclip you put either:

  AS2: _parent.nextFrame ();

  for AS3: MovieClip (parent) .nextFrame ();

  For the last movieclip in programming, you will replace nextFrame() by gotoAndStop (1);

• Export video in After Effects

  I'm trying to export a video in After Effects and when exporting video, ago only audio, no video or the video and audio are not synchronized.

  I tried to export in the Render Queue in After Effects and Adobe Media Encoder. When I tried to export as one. MOV, the file exported with no video and audio. When I tried to export to. AVI, but it showed the video was not synchronized with the audio. What I can do / how can I export the file to fix this error.

  To give a bit of history on the file: this is a clip of a video that I cut and stabilized in Premiere Pro and exported as a .mp4 file. I then used rotoscoping tool to hide the background of the video in AfterEffects. Now I'm trying to export the video to a file that can be played on a projector for an exhibition, but the export does not work properly.

  I guess the mp4 exported pp are 1920 x 1080, and they play with success AND without distortion, correct?

  Some codecs and multimedia containers allow only a finite set of horizontal & vertical dimensions... mp4 among them.  This could be the source of your problems if you actually try to create files of 1920 x 1200.

• Voiceover first clip of bad quality, after export only. Audio effects involved. How can I fix it?

  All the sound quality is as desired in the timeline panel during the first edition. After export, the first clip in voice-over ONLY, now has a dominant white fuzzy noise. If I delete this clip and export, the clip that was the second, but now first, inherits the problem.

  The video below has the original "first music video" removed, to show that the problem persists in the new video for first, which was previously the second and previously sounded very good. Each "phrase" or an "expression" is on his own audio clip, on the same track.

  Also note that the sound quality of the music is great in each. In addition, the quality of the voice is perfectly fine in all the remaining 3 minutes of video.

  From what I can tell, it's like audio effects have not been applied to the item first, after export. I use DeNoiser, dynamics and Volume of the channel in the whole of the audio track of the set (as opposed to each individual clip) voice. When I apply effects to each of the first 3 clips and place them on a separate track, and export, all 3 clips have the problem of white noise.

  I guess that the effects take some time to 'register' and so when effects are applied to the entire track this should happen only once. But just who does not sense that this is a permanent problem or every video ever made by creating using DeNoiser and dynamics would have this problem!

  What Miss me? There must be a way to solve this problem.

  Here is a screenshot:

  

  I use version creative Cloud, Adobe first Pro CC 2015

  I exported with the following parameters:

  H.264

  Format AAC, AAC Codec (tried MPEG and Dolby as well)

  48000 Hz

  Stereo (tried MONO as well)

  High quality

  320 kbps bitrate

  Bitrate priority

  Make maximum use

  
  

  Thank you.
  

  WORKAROUND SOLUTION:

  I used both your advice to a solution that WORKS. Simply, I moved all the audio on this track 5 seconds back and insert an audio clip arbitrary at the beginning of the track. I then exported audio on one. WAV file. I imported the. WAV file in the project and trim the beginning (with the arbitrary clip) back to what is supposed to be the beginning of the audio.

  The arbitrary clip inherited the problem and the remaining clips are great. They reside on a track that has no effects applied, as the. WAV files retain the proper sound quality.

  Also, I've read just after this operation that checking the box "Freeze" can cause the denoiser to apply instantly. I've never tried, but if it works, it's probably a simpler solution.

  Thank you.