Clone tool of the photoshop2015 acting weird

Similar Questions

• Why clone tool set the tone?

  Clone tool has never acted as the demos show too.  That's how it worked in CS3, 4, 5.  I see all the demos that show works like I think it should.  Actually everything I've ever gotten is cloned items that are visually close but are always lighter or darker.  It's light elements lighter same clone, as a f stop value and elements dark clone even darker about 1.5 f stops it seems.  In fact he clones black and white very well but is really almost can't get accuate bypass neutrals such as the skin.  After months of various reading and tonight, alone I spent 5 hours parameters and variations trying to get a particular job without result.  I use the fake tool?  I find that I can get exact clone if I select a zone, control J a layer and then move it and put it on w / healing or as needed.  Why clone must adjust things?

  Hello, just got out of bed!  Thank you for your interest.  For Mr. Dennis, yes the Normal value.  It's almost all I use. For Mr. Carboni, as always it's what I see online, not what I get.  Yes, I spent hours setting things as said on the various pages here.  I actually try to use only the original open the file, the original file open w / a copy of control J and n, adjustment layers open seems to have no effect, the thing to ignore is checked.  Thus, it seems that it is beyond my ability to read to resolve.  Hard as you can find it to believe, I have no idea how do to 'screenshot' I just get fingerprints on it.  HaHa.  Sorry, but not a great interest in computer latest photos.  I have a key that says PrtScnSysRq on it.  Who is he?  It seems to do nothing.

  Just to update, at 03:00 I am so frustrated I have reset the stuff photoshop (left and other menus) to the default values (Arrrgggg! I hate it) and went to bed.  When restarting today behavior is closer to what I expected, I say it is the right solution, try a lot of custom parameters...  I would call it useful now.  I suspect a combination of parameters and of the person in the Chair syndrome.

  Thank you for your interest to answer two.  Richard

  Google just the idea of screenshot.  Now I know how if I need again.  Thank you all once again.

• Clone tool offsetting the source when it is not defined

  I did not put the Clone Stamp tool to any compensation other than where I place, but if I click on more than one occasion, he step duplicates the source.

  I can not find anywhere the causes is not the zone 'Of Frame Offset' clone of the source Panel and which is set to 0.

  Someone has hot ideas to stop?

  Thank you!

  -Renee

  I closed and restarted Photoshop and the clone tool is now normally.  I still have no idea what caused his step double my source point. But at least he does more.

• the touchEvent acting weird

  OK, this is really strange. I have a screen, in which I have a few managers. In the account manager, which locates in the middle of the screen, there is a table with a table header (i.e. not focusable) and with a couple of RowManagers (which are focusable), containing some LabelFields. The header and the class RowManager extend VerticalFieldManager.

  Now I have these lines focusable and when I double click on a line, I want to do something. I overrided the touchEvent method in the RowManager, it looks like this:

  protected boolean touchEvent (TouchEvent message) {}
  {Switch (message.getEvent ())}
  case TouchEvent.GESTURE: {}
  Gesture TouchGesture = message.getGesture ();
  If (Gesture.getEvent () == TouchGesture.CLICK_REPEAT) {}
  If (Gesture.getClickRepeatCount () == 2) {}
  fieldChangeNotify (1); This brings up only a Dialog.alert in the main screen.
  Returns true;
  }
  }
  } default: return super.touchEvent (message);
  }
  }

  Now when I run the application, the strange thing: using tapping (left mouse button) works fine, but when I click (not double click) on the table, the menu (which is supposed to be shown using only the Menu device key) suddenly appears as a popup on my cursor. Therefore, it is impossible to do a double click, because the first click, menu popup appears and the second made the choice on the shortcut menu or actually disappear. I do not use any menu of context in my application (at least I'm not aware of it), so it's really strange for me... Here are some screenshots:

  

  Someone has an idea of what the problem may be? I'm doing something wrong?

  I have solved, the problem is, that the click was not consumed. And since it is a field, not a ButtonField, the ButtonField.CONSUME_CLICK would not work, so I overrided the navigationClick method:

  protected boolean navigationClick(int status, int time) {
    return true;
  }
  

  The menu no longer appears.

• Stupid Photoshop. Clone tool does not. That means "could not use the clone stamp because the area to clone has not been defined (option - click to set a point source)" means?

  Please help and bear with me, I can not know what you are talking about. Total newb

  Nice day!

  The Clone Stamp tool is intended to be used to paint the parts of an image on one image (the same or another).

  To do this, a sampling point must be set for Photoshop 'know' what piece to be used and which is done with the Clone tool from the selected buffer, alt-click on the space provided.

  Kind regards

  Pfaffenbichler

• Where is the clone tool?

  I had picture it photo program on my computer before, she was a clone button, I now adobe elements 10, because I can not find a clone button, please help

  Lorraine

  Title of the message was edited by: Brett N

  Right-click on the tool directly under the red eye, and then you can choose the clone tool or the configuration tool.

  

• Clone acting weird tool.

  Work in Photoshop CS6 clone tools seems to be picking up everything in childbirth not a particular place selected. Selecting the place is fine, and then releasing the option key button a the whole layer greyed version moves with the mouse. Have uninstalled and reinstalled.

  You have Clipped unchecked in the Panel Source of duplication?

  

• After update to Photoshop CC 2015.5.0 the clone tool will not show the crossline

  After the update of Photoshop CC 2015.5.0 my clone tool appear no more the focus of point of origin. I can see the target point, but not the point of origin.

  Is this normal or a problem with my installation?

  Anyone know, how I can do vibile kdshjfk cross for the source visible again?

  Thank you.

  No, not normal. You must be able to see the viewfinder to control what you draw. It is fine on my MacBook of retina with the same upgrade.

  What is a video display problem?

  I can't believe that the file is already damaged, but:

  

• How can I get my tool clone to stop the reversal of colors instead of working as a clone tool!

  How can I get my tool clone to stop the reversal of colors instead of working as a clone tool?

  Blendimg and how the tool is set on?

  

• in the separation frequency step, clone the orange color application tool / overlay expired, how do I reset my clone tool?

  Hello

  given that Adobe support be contacted only during my hour of work (handy indeed ) I need expert help.

  Basically, I'm still new in photoshop and I use my tool clone for different things (remove glare and the frequency of separation mainly).

  A week ago, I used the clone tool and at the end of the process of separation of frequency, when I have to use the tool clone to readjust the tone of a part of the skin of my model, surprise: I have a bright orange instead... as an overlay.

  I checked the clone window and that the box was untucked, I lowered my opacity etc... It became less bright, but still orange...

  I can't edit one of my model skin and I have to prepare my wallet at the end of the month...

  Sagna can help me to restore my clone tool? PLEASE...

  Thank you

  Sue

  Hello

  Greetings!

  You can reset the Clone stamp Tool

  Select the Clone Stamp tool, and then select "Reset Tool", as shown in the image below

  

  Hope that helps

  ~Assani

• Adobe supports CS4 products? Photoshop clone tool is inoperable at this time. Worked the month last but not today updated hardware drivers on Compaq z620 wkstn ran patch from Adobe...?

  I use Photoshop CS4 on and off for the preparation of the image.

  recently I tried to use the clone tool and noticed he attached to a square 20 x 20 pixels of the image and move it.

  I've updated all my hardware HP and Logitech drivers, ran the patch from Adobe for photoshop CS4, but it's still the wrong thing.

  Other tools seem to work very well.

  In the Panel of Source of duplication , Clipped to check and see if it's better.

  

• I have the last cloud of Photoshop/creation or what they call these days. I just changed a photo and sudenly I lost my column of tools on the left side of my picture. The column with the Magnifier to enlarge etc clone and all those around 10 or m

  These aren't the tools that I've lost. I lost those with enlargement tool (+/-, clone tool, tool mix etc.) The only tool I have is the crop tool. Dan

  Hi Dan,.

  Please make sure you have the Tools selected under window on the menu bar Option.

  If still the same.

  Try resetting preferences.

  Press and hold the CTRL, Alt, shift (Windows) / / Command, Option, Shift (MAC) while starting up of Photoshop. A dialog box appears asking if you want to delete the preferences/settings file. Select Yes

  That recreate the preferences and set its default value. So backup Actions/spaces of work/Plugins added (If any).

  Let us know if that helps.

  Thanks for posting on the Adobe Forums.

  ~ Assani

• I have a black stripe on the wall behind the speaker in my film.  Is there a way to remove it because I could do in Photoshop with the clone tool?

  I have a black stripe on the wall behind the speaker in my film.  Is there a way to remove it because I could do in Photoshop with the clone tool?

  AE has a clone tool.

  If the black stripe is stationairy you can use a mask to isolate a good piece of wall one drop on the original clip

• Could not use the Clone Stamp tool as the area to clone has not been set

  Freshly installed 10 items.  Can not use the option-click to define an area for the clone stamp.  The error I get is:

  Could not use the clone stamp tool because the area to clone has not been defined (option - click to set a sampling point).

  New Mac Mini.  Had the same problems in Elements 9 so I installed the trial of 10.  Is it an error of keyboard shortcut?  Do not have this problem with Elements 9 on my Mac Air or my Windows 7 system.

  I'm not a newbie and know how to use the tool clone.  I won't say that I'm an expert, so if it's something related to diapers please throw some ideas.

  Yes, that sounds like a problem of layers.  If the area that you use to define the source of duplication is a transparent area on one of your layers, it will not work.  Released from the Palette layers, then make sure that you use the area of the image (and not the mask area) - if the area of the image on the layer is active, it will have a border.

  Ken

• Brushes in the clone tool

  In items 1 I could get in shape and the hardness of the brush in the tool Clone.  3 items, I have only the menu presets for brushes, soft or hard.  (I have a good menu brush with the Healing Brush tool, but I have no opacity setting.))  Any ideas on how to change the hardness of the clone tool?  Thank you.

  There is not an option or area additional options with one so that isn't a problem.

  Have you checked to see if the shortcut works with another brush set. Try the default game is the game that I used to check it works in PSE 3. I use Windows, but I doubt that this shortcut or ability would be different using a Mac.

  Edit: This shortcut should is exactly the same on Mac that PC is not a difference in OS shortcut. Reference table below the link... page 2.

  http://darksideofthelens.com/2008/08/Photoshop-elements-keyboard-shortcuts/

  It's on Page 2 of this ranking of shortcut. BTW, you click on the graph to make it disappear. I clicked on all around the graph before it dawned on me.

  If they don't work, try a reset of the tool. Right-click on the icon of clone in the options bar. It is first clone stamp icon on the left side of the options bar... it one that is colorful. Click on it and select "Reset Tool" from the list. Try the shortcut again and see if it works.