Qosmio G20: Wake up to sleep with a security camera?

Hi, my laptop is a G20.

Is possible to wake up from the day before, with an outdoor security camera, via the USB port?

Thank you

I don't think it's possible, but maybe all 3rd party applications will help you.
Try goggle around these small applications.

I found this one: WakeupOnStandBy
http://WakeUpOnStandBy.www-dennisbabkin-com.QArchive.org/

I put t know if it will help but maybe you can use something similar

Tags: Toshiba

Similar Questions

  • Qosmio G20-139: error creating DVD with MCE

    Hello

    I'm having a problem DVD creation with MCE. I followed all the links, trying to save my recorded TV progs.

    I get on well, until it starts to create a DVD. It only happens to 1%, then he rushes up to 100% and after about 30 seconds it says "dvd creation error".

    I use a G20-139 and the dvd drive is a carpet * a dvd - ram uj846s.
    Help.

    See you soon

    Ogilvie

    Hello

    It is not easy to say what the problem is here, but in my opinion, you should try to use a third party burning application, try to create DVDs.

    I can recommend Nero Express. I tested it on Qosmio G20 and it works perfectly. I also have very good results with Ulead DVD MovieFactory 5. It works perfectly.

  • Qosmio G20 wakes up after hibernation for no apparent reason

    Hello all,.

    For a while now, I've noticed that my Qosmio G20 tends to wake up from hibernation at random times for no reason apparent. When I place it in hibernation during the night, it passes in a State of hibernation, but (normally) after a few hours suddenly waking up from that State for no reason.

    Obviously this isn't a big issue, but I prefer to Hibernate when it's possible (as opposed to the day before) and it's pretty boring to woke up at 04:00 by triumphing over the Qosmio music shine (it's still better than windows ' your da!) " : P)

    Any ideas?

    Kinder,.
    Lee.

    Hi Lee

    Please check the BIOS settings. I'm not 100% sure, but on a page on the side right, there must be some sort of wake-up option. Check if this option is enabled.

  • Flex 10 wake up from sleep with Windows 8.1 problem

    I installed Windows 8.1 but have a problem with the wake up the computer from sleep mode. Someone else the problem?


  • Computer won't wake up from sleep with Windows 7 sp1 installed

    I have a problem very persistent and annoying.

    My office don't always sleep wake. When you wake the computer, fans turn and everything becomes energized, but the screen stays off. The only option at this point is to press on and hold the power button or turn the power off. Windows does not start, run and shutdown normally, but it fails every time trying to wake up from its sleep. The problem started after I installed Windows 7 service pack 1 and disappears if the service pack is uninstalled.

    I have a motherboard EVGA FTW3 with a Crucial C300 SSD as my main drive. I thought I had found a solution with http://support.microsoft.com/kb/2495523 but it didn't work. My bios is up to date, the firmware is up to date on my SSD and my the Marvell controller firmware is current. I tried to plug my SSD in the Intel SATA ports (and disable the controller Marvell making) but it did not help. I went through every setting imaginable, with the support of EVGA, tried to turn off "Allow hybrid sleep" in the power of the BIOS settings. The only change I found that 'fixed' the problem is uninstall Windows 7 service pack 1.

    My computer specs:

    Card mother EVGA FTW3

    Processor Core i7 980 x

    Memory Corsair Dominator DDR3 1600 (3 X 4 GB)

    EVGA GTX 580 graphics

    Crucial C300 SATA 6.0 Gps SSD

    Western Digital 1 TB SATA 6.0 Gps data drive

    NVIDIA 3d Vision Kit

    I use the latest drivers for all devices because I clean just installed Windows 4 days to try to resolve the situation.

    Beta EVGA Bios recovery mode fixed 80 S3 sleep for me also. Everything seems to work perfectly after that I did the bios flash.

  • WiFi slow to wake up after sleeping with Vista

    Inspiron 9400, Core 2 Duo, 2 gigabytes of ram, Vista Ultimate, Dell 1390 wireless, Linksys G Router card.

    When I close the lid on my 9400, it enters mode "Eve". When I open it it snaps back very quickly with the exception of my wireless connection. Sometimes this can take more than a minute to recover.

    I've updated the Vista driver on the Dell site for map of 1390 - no help. I tried another HD with XP on it (even other materials) and he gets less sleep seconds 5 or more.

    Just for grins, I put the action for closing the cover Hibernate (Vista again) and I have the same delay for the wireless reconnect when I recover from Hibernate mode.

    My daughter of 1720 doesn't have this problem (don't remember what was his card).

    Anyone else with this experience? All the patches?


  • Qosmio G20 talks in his sleep in?

    Now, this may sound weird, but my computer speaking literally when in "stand-by"!

    This has only started to happen after I reformatted a month ago. When he is asleep, he speaks in this strange-computer voice says things like

    "Hello, how are you?

    then it waits about 5seconds and meets himself

    "I'm fine thanks, and you?"
    What is c? someone at - it? This serves a purpose?

    : D it s a funny theme :D
    Thanks allanf to clear up this laptop strange speaking ;)

  • Qosmio G20: How to disable/bypass SCMS-T for adiosyn with a bluetooth headset?

    Hello all,.

    I recently bought a set of bluetooth stereo headphones (Creative CB2350) and found that, because of the inclusion of SCMS-T copyright protection I can't audiosync directly to my computer laptop bluetooth stack (Qosmio G20). The headphones come with an audio jack adapter (bluetooth transmitter), but it runs on a single AAA battery and cannot last more than an hour; So I need to connect without it.

    Is there a way to disable or circumvent the requirement for protection by copyright SCMS-T in the last toshiba bluetooth stack? and if not why not? I paid a lot of money for my Qosmio and my helmet and I'm leaving furious inclusion deliberate software/firmware designed to keep me from using my material for legitimate purposes (i.e. what they were designed to do).

    Please help me,
    Lee ([email protected])

    PS: Frankly I didn't really a problem with DRM technology before that, but now I can see how irritating and pointless DRM is. Compare the number of people using bluetooth devices for piracy (negligible) number of bluetooth headset that does not support the MAN - T (a lot if all my google searches are anything to go by) and see you how stupid the idea of DRM via bluetooth is really.
    In my opinion not so humble large commercial companies like toshiba should woven converluted pap as SCMS-T as a matter of appeal; the final user does not want to spend several years download licenses and scouring the web only to find out access to his material is totally useless. (Sorry for the rant, but that's how I feel).

    You're right, I completely agree with you.
    The problem here probably that Toshiba is a little anxious summer continued in the music industry, if users use technology to copy copy-protected music.
    I think that it should be possible to transfer the responsibility of the end user by some sort of agreement, that the user must confirm once by a mouse click during installation.

    I already had a discussion with Toshiba customer service on this issue. They informed me that they reconsider this issue and try to find a solution for this. The odds are so good
    that a future version of the BT-stack will be the ability to disable the GUY.

  • Qosmio G20 156 runs slow after system restore

    Please help since my son crashed my pc and I restored it with the cd that came with the machine im problems with the screen saver works slowly and some programs that run slowly as vision of nero which was fine before. I tried all the usual stuff like the lowering of graphics acceleration but no joy please don't help

    Send me an email to [email protected]
    my machine is a qosmio g20 - 156 pqg21e

    Hello

    It is hard to believe that the Qosmio G20 may have some problems with the saving screen graphics and slower running.

    In any case try check the energy saving settings and the use of the processor to maximum power. Check also running a process in the Task Manager and stop all unnecessary processes running. Don't forget that antivir application doesn t do any disk HARD analysis in the background.

  • Qosmio G20: Qosmio player and FM Tuner

    I saw a question on the FM tuner in the Qosmio G20 series (and other portable with Qosmio Player). Users responded that the Qosmio Player has no FM tuner! That's wrong!

    I did a manual search in Qosmio Player using frequency analysis, and it is possible to scan the frequency range of the FM band. So, I found a few radio stations that I can save. The resolution is not the best but you can easily find radio stations!

    Hello

    I agree with Togan. The units are supplied with different hardware configurations.
    As a result, some units support a tuner and are supplied without the tuner.

  • Qosmio G20 - 108 awakening with lid closed

    Hello

    I have a Qosmio G20-108 with BIOS 1.2. I've set a scheduled task in Windows to run at night and wake up the computer to do. This only happens when the cover is open, if it is not closed, the task is not executed. Does anyone know if the reactivation of the BIOS will work if the lid is closed? Update the BIOS to 1.4 make windows work power the machine on the lid closed?

    On an unrelated note, where can you get information about what is in the various versions of BIOS? I'm not used to slapping just the latest BIOS on a machine if I have the problem, I want to know what is in the update, what are the features it has and what suits it contains! An hour to search the net and support of Toshiba pages and I cannot find a thing, except for the file to 1.4 real day.

    See you soon,.

    Steve

    Looks like everything is clear now

  • Qosmio G20 screen is comatible with display Qosmio G10?

    Hello

    Dose anyone know if the screen Toshiba Qosmio G10 is compatible with the Toshiba Qosmio G20?

    Thank you guys

    Of
    Sweet

    Hello

    I think display of the G20 should be compatible with the Qosmio G10 display.
    I searched a bit and found that the Qosmio G10-100 PQG10E was fitted with the 17 "WIDE XGA LCD.
    The Qosmio G20-101 PQG20E supports the same 17 "WIDE XGA display.

    Therefore, it seems that both units use the same screen.

  • With Qosmio G20 PCI TV TUNER type

    Hi, my os XP PRO sp3 does not recognize my type of TUNER TV PCI with Qosmio G20
    I'm trying to download the driver, bit it is not resolved.
    Thanks for your help

    Hello
    I'm waiting for the answer, I think it's better that Toshiba support answers me.
    but I can't create a new driver for the type of Tuner TV PCI w. before I have XP MCE and now XP Pro SP3
    Thanks a lot for your help.
    I also have a problem to update my bios 1.30 to 1.40, MSG is no administrator privilege, but I am an administrator.
    My laptop is a Qosmio G20

    Post edited by: Berrabah

  • System drive Qosmio G20 with an image or a clone backup

    On another thread, I asked problems with Acronis True Image to backup and cloning of my system (C) disk. Whenever I'm trying to clone my system disk or recover an image, I can create and restore the image, but when I install the player recreated and tries to start, I get as much "windows did not start successfully, I would like to start in safe mode... last good config known... or normal. All the options to return to the screen.

    I have two drives 100 GB sata, with the first disc of the op system, programs and the second with my data and therefore has set up the raid as two independent disks and the raid console option disabled.

    After trying another product of cloning with the same result, I guess there is something in the Qosmio implemented that is the cause. I read that Qosmio Player is installed on a hidden partition of Linux on the system drive and am wondering if it may not be picked up by the cloning and imaging software and that may cause boot failure.

    So I have two questions. First of all, nobody knows why I might be problems starting from a clone or recovery using third party disk image backup software and second, anyone successfully upward and restore a G20 Qosmio Player system, and if so with what software and do you perform all the special functions.

    Thank you very much.

    Hello

    Well, I use the Toshiba Recovery CD to restore the operating system on the Qosmio G20.
    It has also 2 x 100 GB, but under my computer, I saw only one a HARD drive. I created 2 partitions with the ghost (second option on the recovery CD).
    However, I have now 2 partitions but after this procedure, the Qosmio player has been removed. I though that I need to install again simply because of the Qosmio player but I tried to install the Qosmio player after the recovery procedure and it has been successfully.

    2 existing partitions and I also have a Qosmio player on my laptop.
    But one thing is very strange; I can't locate the partition in disk management.
    But everything works ok

  • Qosmio G20 with Intervideo WinDVR3

    Hello

    I have a laptop Qosmio G20/395LS (purchased at the Japan) that since I converted to English Windows XP Pro SP2. I then downloaded all the drivers from Toshiba on the site of Toshiba UK, choosing the Qosmio PQG20, which is the closest model from my Japanese version. (The Toshiba to the Japan site is not all drivers available for download, that's why I used the site of Toshiba UK.)

    In any case, all functions work perfectly, except that I canoe use Intervideo WinDVR3 to watch television. It recognizes the Composite inputs and S-video but not the antenna TV input option. I have a normal TV antenna cable connected to the Qosmio and can watch TV with other software such as Qosmio Player, Windows Media Center and same Intervideo Home Theater. But not with WinDVR3 (Im using the latest version downloaded from the Web site of Interviodeo.) I don't like Windows Media Center or Intervideo Home Theater and Qosmio Player not use that by cutting off the power supply, so I defintely want to use Intervideo WinDVR.

    I contacted Intervideo, and they said that my hardware is certainly consistent, but I must have the correct WDM driver installed for the TV Tuner to operate correctly the WinDVR. Im not sure what is a WDM driver, but looks like I need to download the correct driver for the TV Tuner on this Qosmio.

    I checked Toshiba Japan website, but I saw no TV Tuner driver to download it. Ive tried a few of the drivers TV Tuner for the different models on the Web sites of UK and US Toshiba, but WinDVR still does not recognize the option antenna TV.

    Can someone point me to the right driver WDM driver that I need to get this software WinDVR3 will?

    Thank you.

    Hello

    Toshiba doesn't recommend that you install the graphics drivers 3rd or any additional graphics accelerator. This may damage the video card or the motherboard.
    On the Toshiba driver page, you will find all the WDM drivers. Only the Tv tuner and graphics drivers.

    I don't know if the WinDVR is supported by Mr. antenna interface I've never checked.
    However, I found this site. If you wish, you can consult this site on WDM driver:
    http://BTWinCap.sourceforge.NET/

Maybe you are looking for