Cloning of EBS 11i on RHEL 5

Similar Questions

• Cloning of EBS 11i RHEL4.6 to OEL5.6

  Hi hussein.
  
  I am cloning our EBS 11i RHEL4.6 to OEL5.6, but I encountered error:
  

  Beginning database tier Apply - Sat Feb 19 01:40:39 2011
  Log file located at /u02/oradev/devdb/9.2.0/appsutil/log/DEV_oracletrng5/ApplyDBTier_02190140.log
  RC-50004: Fatal: Error occurred in ApplyDatabase:
  RC-50014: Fatal: Execution of AutoConfig was failed
  
  ERROR while running Apply...
  
   ERROR: Failed to execute /u02/oradev/devdb/9.2.0/appsutil/clone/bin/adclone.pl
  
   Please check logfile.

  I checked the log file, and that's what he said:
  

  [AutoConfig Error Report]
  The following report lists errors AutoConfig encountered during each
  phase of its execution.  Errors are grouped by directory and phase.
  The report format is:
        <filename>  <phase>  <return code where appropriate>
  
    [SETUP PHASE]
    AutoConfig could not successfully execute the following scripts:
      Directory: /u02/oradev/devdb/9.2.0/appsutil/install/DEV_oracletrng5
        afmkinit.sh             INSTE8_SETUP       127
  
  
  AutoConfig is exiting with status 1
  
  RC-50014: Fatal: Execution of AutoConfig was failed
  Raised by oracle.apps.ad.clone.ApplyDatabase
  
  
  StackTrace:
  java.lang.Exception: RC-50014: Fatal: Execution of AutoConfig was failed
          at oracle.apps.ad.clone.ApplyDatabase.checkAutoConfigErr(ApplyDatabase.java:2322)
          at oracle.apps.ad.clone.ApplyDatabase.runAutoConfig(ApplyDatabase.java:2117)
          at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:415)
          at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:319)
          at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:295)
          at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
          at java.lang.reflect.Constructor.newInstance(Native Method)
          at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
          at java.lang.Thread.run(Thread.java:479)

  It is stuck in afmkinit.sh :(
  
  
  Help, please...
  
  Thank you

  See the list of operating system Linux.

  See also, (Note to master of the Linux OS requirements for database server [851598.1 ID]), it clearly says "non certified, not supported, unplanned".

  Thank you
  Hussein

• EBS 11i for RHEL 5

  Hi hussein.
  
  Can you give me notes/docs on how to install EBS 11i (11.5.10.2) on RHEL 5?
  
  
  Thank you very much
  
  
  Mrs. Mina

  Please view these docs/links.

  Oracle Applications Installation update, version 11i (11.5.10.2) [ID 316806.1]
  Installing Oracle Applications 11i on OEL5 or RHEL5 [ID 730444.1]
  Recommendations for install of Oracle Applications 11i [ID 294932.1]
  Oracle database on Unix AIX, HP - UX, Linux, Mac OS X, Solaris, Tru64 Unix operating system Installation and Configuration requirements checklist (8.0.5 to 11.2) [ID 169706.1]

  Installation Guide for Oracle Applications: Quick installation using
  http://download.Oracle.com/docs/CD/B25516_18/current/Acrobat/r115102ins.PDF

  Thank you
  Hussein

• cloning of EBS 11i, AIX 5 L

  Hi friends,
  
  I am cloning EBS 11i, AIX 5 L on the same server.
  Currently we have on the server @user oracle EBS 11i PROD.
  I want to clone to EBS 11i TEST on the same server, oracle2 @user.
  Things I've done:
  1. run autoconfig
  2 run preclone programs
  3. copy appl and db of the file to the new location for the user oracle2.
  4. run the user oracle2 cloning.
  
  But I got the following error:
  
  $ perl adcfgclone.pl dbTier
  Enter the password [APPS] APPS:
  Apps
  ERROR: Unable to set the classpath
  U10/app/Oracle/kprddb/9.2.0/appsutil/clone/bin/... /jlib/classes111.zip: missing
  
  First create a new context for the cloned system file.
  The program will ask you for information on the new system:
  
  SH: 946274 instruction (coredump) illegal
  ERROR: creation of context not completed successfully.
  Please check for errors in the /tmp/adcfgclone.err file
  
  =========
  adcfgclone. Err
  =========
  stackpointer = 2ff20660
  JVMXM004: JVM executes the abort shutdown sequence
  JVMDG217: Dump Manager is a Signal Processing - please wait.
  JVMDG303: Base file that requires JVM Java
  JVMDG304: Base of Java written to /u10/app/oracle/kprddb/9.2.0/appsutil/clone/ file
  bin/javacore946274.1227240407.txt
  JVMDG215: Dump Manager handled Exception Signal 4.
  = end =.
  
  
  Can you help me please...
  
  
  Thank you very much

  Please see the following note, it should be useful to resolve the issue.

  Note: 393723.1 - adcfgclone.pl JVMX004 JVM Core error when running on AIX
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=393723.1

• Cloning/migrating EBS 11i for Linux

  Hi all
  
  We have a customer with EBS 11i on AIX. We always test our e and again, we encounter a lot of error.
  Since we have limited access to the installation, I want to clone in our offices (on linux) so I can have access for a long time and the tests on this subject.
  Can you give me notes on how to clone from aix to linux 11i?
  
  
  Thank you very much
  
  YXES

  Please see the following notes:

  For the application tier:

  Note: 238276.1 - migration to Linux with the version of Oracle Applications 11i
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=238276.1

  For the database layer:

  Note: 230627.1 - process Import/Export 9i to Oracle Applications Release 11i
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=230627.1

  Note: 362205.1 - process of Import/Export for Instances of Oracle Applications Release 11i with Oracle Database 10g Release 2 database
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=362205.1

  Note: 557738,1 - Export/import notes on Applications 11i Database 11 g
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=557738.1

• Cloning of EBS by using batch / response file

  Hi you
  
  EBS 11i / R12
  RHEL 4.6
  
  Can I clone the EBS 11i or R12 by using a batch file and the answer? I want to say in front of the interactive mode.
  I want to tread the cloning to our customer. But I want to put it on a scenario where the operator just run
  single command as #./clone_apps.exe
  
  
  Thank you very much.
  
  Ms. K

  Hello

  Please see these documents.

  Note: 454393.1 - how I used RedHat Command Line Utilities to automate the quick Clone my Test and the Dev forums
  Note: 345145.1 - is there a way to automate the guests for Adcfgclone.Pl?

  Thank you
  Hussein

• EBS 11i clone question

  Hi all
  It's been a while that I cloned our EBS 11i.
  We used to have an identical structure on applications and db between environments Prod, Uat, and Crp levels. Some time ago, we moved our Prod d/b on the SAN. So, now I have datafiles, redo logs and control files in different places then before. In production, they are now in/prod/oraprd/oracle/data, / prod/oraprd/oracle/redo/prod/oraprd/oracle/control.
  UAT, they are in the directory/uat/orauat/data.
  My question is: after I start an adpreclone.pl and copy the files on Uat, then unzip them in appropriate directories, can I then move to the init.ora parameter and change the locations of the control files?
  After that, change (IRPP) and rebuild controlfile prior to execution adcfgclone.pl?
  
  Thank you
  Eugene

  epipko wrote:
  So, in my case, if I have some data/logs/from recovery from 3 directories in prod in 1 directory of the Uat, I just answer 1 question 'Number of DATA_TOP on the system target' and everything will be built properly?

  Fix.

  Thank you
  Hussein

• Cloning by rman on a different server with the directory structure different and different DBNAME in EBS 11i using quick Clone

  Hello

  We want only DB (not apps) cloning through PROD rman, step TEST EBS 11i using quick Clone without taking downtime of PROD (i.e. No. BKP COLD).

  Source and target are on different servers, different file structure and the different database name.

  Kindly let me know the detailed procedure?

  Kind regards

  RR

  
  

  You can use this simple method that I am.
  

  
  

  Take backup of production with rman:

  {

  overlap archivelog all;

  backup format compressed backupset database tag PROD_FULLBKP ' / u10/PROD1_L0_BKUP_20131125/PROD_DB_set%s_piece%p_%T_%U' filesperset 15;

  SQL 'alter database backup controlfile to trace. "

  SQL 'alter system switch logfile;

  SQL 'alter system switch logfile;

  SQL 'alter system switch logfile;

  overlap archivelog all;

  backup as compressed backupset archivelog all delete input PROD_ARCHBKP format tag ' / u10//PROD1_L0_BKUP_20131125/ARCH_PROD_set%s_piece%p_%T_%U' filesperset 20;

  backup format ' / u10/PROD1_L0_BKUP_20131125/PROD_ctl_%T_%U' current controlfile;

  }

  
  

  Move the backup on the test server:

  SCP /ftp

  Modify the pfile to the test server:

  Parameters such as:

  db_name

  control_files

  modify the pfile to match the location of the test server

  Add this parameter

  db_file_name_convert = ' / PROD_datafile_location/datafile ', ' / test_datafile_location / data ', ' / PROD_datafile_location/tempfile ', ' / test_datafile_location / data.

  log_file_name_convert = ' / PROD_redofile_location/ONLINELOG ', ' / test_redofile_location / data ".

  Start the DB:

  Start the db in nomount:

  startup nomount.

  Connecting to rman and start to restore:

  Auxiliary RMAN.

  RMAN > run

  {

  allocate auxiliary channel a1 device type disk;

  allocate auxiliary channels a2 device type disk;

  allocate auxiliary channel a3 device type disk;

  allocate auxiliary channel a4 device type disk;

  data duplicated in the PREPRODUCTION backup location ' / u10/PREPRODUCTION/oraR12/clone_backup/PROD1_L0_BKUP_20131125 ";

  }

  OR

  If you specify time/perform a recovery of time based, like below:

  RMAN > run

  {

  allocate auxiliary channel a1 device type disk;

  allocate auxiliary channels a2 device type disk;

  allocate auxiliary channel a3 device type disk;

  allocate auxiliary channel a4 device type disk;

  data duplicated in PREPRODUCTION backup location 'LOCATION_OF_BACKUP', until ' TO_DATE (7 July 2012 09:45 ',' DD/MM/YYYY HH24:MI:SS') ";

  }

  Concerning

  Karim

• RHEL 6 for EBS 11i (11.5.10.2)

  Hi hussein.
  
  I posted a thread here before on our company to buy or upgrade to a newer server which is of high quality and with more processors and memory.
  
  We are currently running EBS 11i (11.5.10.2) on the current server, which is about 6 years old. It is the single node only and running RHEL 4.6.
  
  Now, due to degradation of performance, we purchase newer machines which will be a two-node configuration. The machine seller said that the os it runs on will be RHEL 6.
  
  My question is... RHEL 6 supported in EBS 11i? I can clone the existing PROD EBS 11i, located on RHEL 4.6 to
  the new servers target running on RHEL 6?
  
  
  Thank you very much
  
  Mrs. Mina

  My question is... RHEL 6 supported in EBS 11i?

  Either you need to install RHEL4 and RHEL5.

  I can clone the existing PROD EBS 11i, located on RHEL 4.6 to
  the new servers target running on RHEL 6?

  If you install RHEL5, you can use quick Clone to clone from RHEL4 to RHEL5.

  Please see the docs for a list of pre - req software. and packages on RHEL5/OEL5

  Oracle Applications Installation update, version 11i (11.5.10.2) [ID 316806.1]
  Installing Oracle Applications 11i on OEL5 or RHEL5 [ID 730444.1]
  Recommendations for install of Oracle Applications 11i [ID 294932.1]
  Oracle database on Unix AIX, HP - UX, Linux, Mac OS X, Solaris, Tru64 Unix operating system Installation and Configuration requirements checklist (8.0.5 to 11.2) [ID 169706.1]

  You can re-edit recreate a link to executable files according to the docs referenced in this thread (this is optional as quick Clone will do that for you).

  Need for clarification on Solaris 10 update for application suite E Business
  Need for clarification on Solaris 10 update for application suite E Business

  Thank you
  Hussein

  Thank you
  Hussein

• Server Linux for EBS 11i upgrade

  Hi all
  
  EBS 11i
  RHEL 4.6
  
  
  Our EBS 11i is running on server HP with OS 4.6 RHEL and a single node only. This server was purchased 6 years ago and lately it is show the performance degradation. We want to migrate/upgrade to a model like high-end HP and make a knot of multiples. But the latest HP model doesn't support a minimum version of RHEL 5.
  My question is, is the support for EBS cloning 11i RHEL 4.6 to RHEL 5? How can I migrate EBS 11i with this kind of scenario?
  
  
  Thank you very much
  
  SIS Inday

  Hello

  It is supported on the database layer node, so there should be no problem in the migration of the database.

  Thank you
  Hussein

• Cloning of EBS R12.2.4 with system file to run on fs2

  Hi all

  EBS R12.2.4

  RHEL 6.5

  I am cloning our EBS R12.2.4, who has run the file system on fs2.

  Information on the E-Business Suite environment

  ----------------------------------------

  EXECUTION of the file system: / u01/appvis/SCREWS/fs2/EBSapps/appl

  PATCH file system: / u01/appvis/SCREWS/fs1/EBSapps/appl

  Non-Editioned filesystem: / u01/appvis/SCREWS/fs_ne

  
  

  .

  
  

  So I copy the folder >/U01/of/SCREWS/fs2/EBSapps

  
  

  But when he asks the system base directory target, and I come home >/U01/of/SCREWS

  It will automatically be poppulate records succeeding and default to the fs1

  How can I force it points to fs2?
  

  
  

  Target system Base Directory: / U01/of/SCREWS

  Home directory for the defined target system on/U01/of/SCREWS

  The target system value based filesystem screws/U01/of/SCREW/fs1

  The target system value another file system based/u01/appvis/SCREWS/FS2

  Target Fusion Middleware Home screws/U01/of/SCREWS/fs1/FMW_Home system

  The target value system Web Oracle Home screws/U01/of/SCREWS/fs1/FMW_Home/webtier

  The target value system Appl screws/U01/of/SCREWS/fs1/EBSapps/appl

  The target value system COMMON TOP screws/U01/of/SCREWS/fs1/EBSapps/comn

  Target directory system Instance home [screws/U01/of/SCREW]:

  Thank you very much

  JC

  No it should not be modified in TARGET. in the file system TARGET will remain same as source.

  Of course how do not support this approach, but on source to change the file system to run for FS1 and run adpreclone and check.

  No doubt, when you ran adpreclone on the source, which was executed at this time file system. I just wanted to be sure.

  concerning

  Pravin

• EBS 11i upgrade confusion

  Hi all

  EBS 11i (11.5.10.2)

  9i DB

  RHEL 4.6

  Fact: The 9iR2 database is certified Linux 3 and 4.

  
  

  Assuming that I migrate or upgrade 9iR2 to 11 GR 2, where install the GR 2 11? This is on linux 4 (current server) or Linux 6 or higher (different server).

  GR 11, 2 is based on 4 Linux?
  

  
  

  Thank you very much

  JC

  Why not the Server Windows 2008 or 2012 instead of Windows 7?

  It is a server and this means you better install a server operating system.

  Kind regards

  Bashar

• EBS 11i supported OS

  Hi all

  EBS 11i (11.5.10.2)

  9i dB (9.2.0.6)

  RHEL 5.5

  We have the performance issue on our 9i database. He can't change his memory for more than 2 GB because of its limitation of 32-bit.

  In the first place, I do not understand why Oracle has brought together this 32bits 9i DB when they know that EBS is memory intensive software?

  You have an idea why he brought together this small memory 32-bit Database 9i?

  Can I migrate this 9i 32-bit to 64-bit 9i?

  Thank you very much.

  JC

  Hello

  The application tier is supported by Linux 32-bit 3, 4 and 5 only.

  The 9iR2 database is certified on 64-bit Linux 3 and 4.

  The best thing to do is to create a virtual Linux 4 machine and move the top database.

  You can also migrate and upgrade the database to 10g or 11g.

  Kind regards

  Bashar

• Data migration of EBS to 12.2.4 EBS 11i

  Hi all

  EBS 12.2.4

  RHEL 6.5

  We migrate our EBS 11i to EBS 12.2.4. Can you help me please what is the correct procedure to migrate data?

  For example in the GL/tables schema in 11i, assuming that our functional did the GL R12.2.4 module setup.

  How I extracted the tables in the schema of GL 11i database and load it into the scheme of database R12.2.4 GL?

  Is it possible that the data loader itself will be to install the module GL R12.2.4 based on configuration data extracted from the 11i database?

  Is it possible to copy the configuration in 11i and fill on R12.2.4?
  

  
  

  
  

  Thanks in advance for your kind cooperation.

  
  

  JC
  

  Hello

  You can do this by using WebADI.

  Since you are going to extract only the balances so this task will be easier in extraction and loading.

  The tables of the interface of 11i and R12 are not very different.

  Almost the same method used by entering data in 11i usable in R12. The data to be loaded will be on spreadsheets prepared by users and validated by the business consultants.

  The application developer should not take the data by itself and insert it into the new system.

  You can do a quick search and find lots of resources on the topic.

  http://Oracle.ITtoolbox.com/groups/technical-functional/Oracle-Apps-l/data-loading-in-gl_interface-Oracle-R12-5011222

  http://kommaoracleapplications.blogspot.com/2012/08/complete-GL-interface.html

  Kind regards

  Bashar

• Discoverer 11 to connect to EBS 11i

  
  Hi all

  IM currently able to connect EBS 11i (11.5.10.2) use DIscoverer desktop 4 (4.1.48.06) on RHEL 4

  I installed DIscoverer desktop 11 (11.1.1.3.0) and try to connect to the same instance ebs 11i but he says

  "Unable to connect to discoverer@ABC.

  you don't have access to all the tables end user layer. »

  I connect with the user of 'discoverer' for both versions

  My question is what to do so that I'll be able to connect with the two explorers 4 & 11 on ebs 11.5.10.2

  OS: RHEL 4.6

  Discoverer 11: 11.1.1.3

  Discoverer 4: 4.1.48.06

  Thank you.

  Please confirm that you have followed all the steps (using discoverer 11.1.1 with Oracle E-Business Suite Release 11i (Doc ID 1073963.1)).

  Why do you need to have access to both discoverer 4i and 11g? 4I discoverer is no longer supported - https://blogs.oracle.com/stevenChan/entry/reminder_discoverer_4i_desuppo

  Please see the following documents.

  Error when creating connection to Discoverer Plus - you have no access to any end user layer table (Doc ID 1108393.1)

  Cannot connect to the Integrator Finder - no access to the Tables EUL (Doc ID 186168.1)

  User with Admin Privs in Disco is unable to connect to the Integrator Disco - no access to the Tables EUL (Doc ID 281187.1)

  Thank you

  Hussein