Cloning of path and for the use of the network

Similar Questions

• Receive error message when you open Outlook; the path specified for the file G:\outlook...pst is not valid.

  I recently exported my outlook to a pst file and saved on my external hard drive.  Since then I get this message when I open Outlook "the path specified for the file G:\outlook...pst is not valid.  How to stop?

  NEVER use the. Functions of export/import PST in Outlook.  They are broken, have been for some time, data loss and often corrupt Outlook profile in use. To perform a backup, just close Outlook and make a COPY of the. PST file.  Looks like (and I guess here) your external HD is G:\. This being the case, that. PST file is probably still attached to Outlook and Outlook can't find it.  With Outlook open, see the supplement files pane. PST file, right-click, and then click "close".  You may need to have the hard drive external and exported. File PST attached and available for work.  If this does not work, you have damaged your profile and will need to make a new one:

  How to create and configure an e-mail profile in Outlook 2007 and in Outlook 2003

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Is it possible to define the name of the path and inside the MSI log file

  Is it possible to define the name of the path and inside the MSI log file, so that it should not be set from the command line.  This way just race the msi causes always a logfile in a specific path and the file name?

  Read the following article and see if it helps.  In my view, it is possible to use InstallShield, but I'm not sure.  It's just a little out of my League. http://www.flexerasoftware.com/webdocuments/PDF/msi_writing_to_the_log_file.pdf.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• wcmUrl cannot run the "evaluateScriptEx" of service method. The server script expression evaluates error. No path required for the ssWeblayoutUrl parameter.

  Hi all

  I have a data file where there is a wcm:element like below

  < wcm:element = "linkUrl" name > [!-$wcmUrl ('resource', ")-] < /wcm:element>

  So, I get an exception to content server

  
  

  Event generated by the user 'sysadmin' to host 'CIS '. Could not generate the HTML page. Unable to evaluate the function. Error running system. wcmUrl cannot run the "evaluateScriptEx" of service method. The server script expression evaluates error. No path required for the ssWeblayoutUrl parameter. [Details]

  An error has occurred. The stack trace below shows more information.

  !csUserEventMessage,sysadmin,CIS!$!csPageMergerUnableToGenerateHtmlPage!csDynHTMLSystemExecutionError,csDynHTMLReportMsgFunction!$wcmUrl!csUnableToExecMethod,evaluateScriptEx!csDynHTMLServerScriptEvalError!$Missing required path parameter for ssWeblayoutUrl.

  intradoc.common.ServiceException:! csPageMergerUnableToGenerateHtmlPage

  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)

  at intradoc.server.Service.buildServiceException(Service.java:2271)

  at intradoc.server.Service.createServiceExceptionEx(Service.java:2265)

  at intradoc.server.Service.createServiceException(Service.java:2260)

  at intradoc.server.Service.buildResponsePage(Service.java:1314)

  at intradoc.server.Service.doResponse(Service.java:2076)

  at intradoc.server.FileService.doResponse(FileService.java:1469)

  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:802)

  at intradoc.server.Service.doRequest(Service.java:1890)

  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)

  at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)

  at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)

  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

  Caused by: java.io.IOException:! csDynHTMLSystemExecutionError, csDynHTMLReportMsgFunction! $wcmUrl

  at intradoc.common.DynamicHtmlMerger.createIOException(DynamicHtmlMerger.java:2588)

  at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:1202)

  at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)

  at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)

  at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)

  at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)

  at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)

  at intradoc.common.DynamicHtmlMerger.outputDynamicHtmlPage(DynamicHtmlMerger.java:2007)

  at intradoc.server.Service.buildResponsePage(Service.java:1267)

  ... more than 10

  Caused by: intradoc.common.ServiceException:! csUnableToExecMethod, evaluateScriptEx

  * ScriptStack! csDynHTMLStackDumpStart, sysadmin, (datasummary) IdcService is SSXA_GET_DATAFILE\, dDocName = 00151164\, = 209607 dID! $

  ! csDynHTMLNoStack! $

  !csDynHTMLErrorMessage,/oracle/ecm/ucm_domain/ucm/cs/weblayout/groups/public/@global/documents//mdaw/mtux/~edisp/00151164~2.xml.parsed,9,40!csDynHTMLSystemExecutionError,csDynHTMLReportMsgFunction!$wcmUrl!$

  -& #62;      & #60; WCM:element name = "linkUrl" & #62; [(--\!--$wcmUrl('resource'\, '')]; & lt; / span & gt; & #60; / wcm:element & #62;

  in sitestudio. SSClassHelper.invoke (unknown Source)

  in sitestudio. SSScriptExtensions.evaluateIncludeXmlEx (unknown Source)

  in sitestudio. SSWCMScriptExtensions.resolveWcmUrl (unknown Source)

  in sitestudio. SSWCMScriptExtensions.evaluateFunction (unknown Source)

  at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)

  at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)

  ... more than 17

  Caused by: java.io.IOException:! csDynHTMLServerScriptEvalError

  at intradoc.common.DynamicHtmlMerger.createIOException(DynamicHtmlMerger.java:2588)

  at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:1202)

  at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)

  at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)

  at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)

  at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)

  at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)

  at intradoc.common.DynamicHtmlMerger.executeDynamicHtmlToWriter(DynamicHtmlMerger.java:2060)

  at intradoc.common.DynamicHtmlMerger.evaluateScriptToWriter(DynamicHtmlMerger.java:1872)

  at intradoc.common.DynamicHtmlMerger.evaluateScriptNoErrorHandling(DynamicHtmlMerger.java:1836)

  at intradoc.common.DynamicHtmlMerger.evaluateScriptEx(DynamicHtmlMerger.java:1794)

  at sun.reflect.GeneratedMethodAccessor500.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  in sitestudio. SSClassHelper.invokeRaw (unknown Source)

  ... 23 more

  Caused by: intradoc.common.ServiceException: path of access is required for ssWeblayoutUrl parameter.

  * ScriptStack! csDynHTMLStackDumpStart, sysadmin, (datasummary) IdcService is SSXA_GET_DATAFILE\, dDocName = 00151164\, = 209607 dID! $

  ! csDynHTMLStackElementWithFilename,wcmUrl,/oracle/ecm/ucm_domain/ucm/cs/weblayout/groups/public/@global/documents/generalmodule/mdaw/mtux/~edisp/00151164~2.xml.parsed,9,40!$

  ! csDynHTMLServerScriptEvalError

  in sitestudio. SSScriptExtensions.evaluateFunction (unknown Source)

  at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)

  at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)

  Therefore I don't see the placeholder to correct the link. How can I fix this, or at least manage the display of the placeholder.

  Concerning

  I don't think the resources without the dDocName specification will work (for example [!-$wcmUrl ('resource', ")-]).

  At some point, the code path probably leaves the SiteStudio component and goes back to the core code WebCenter content to fetch the revision. It seems that it is where he meets a problem (impossible to find the last out for review).

  If you turn on additional detailed complete tracking for site *, file * and system * this gives you a clues?

  Jonathan

  https://jonathanhult.com

• Hello, I would like to take advantage of the promotions on Adobe Photoshop for a single user (valid until tomorrow), but I have two questions.  First of all, I intend to buy a new computer for a month and for the moment, I don't know if it will be

  Hello, I would like to take advantage of the promotions on Adobe Photoshop for a single user (valid until tomorrow), but I have two questions.  First of all, I intend to buy a new computer for a month and for the moment, I don't know if it will be a pc or a mac. Do I have to decide at the time of the purchase, what system I'll use?  Secondly, I also have a plan for about a month to open an individual company. If I buy the program as a person, could I then use it as a business?

  Creative cloud is cross-platform. Licensing is not serious. By definition, an "enterprise" might as well be a single person. It is totally irrelevant, as long as you purchase a full license appropriate regardless of any promotion.

  Mylenium

• Error: "cannot find the path specified for the old driver X5XSEx_Pr135.

  Original title : can not find the path specified for the old driver X5XSEx_Pr135 is the message I get.  How can I solve this problem?  What is a legacy driver?

  Can you help me solve this puzzle?  I have no idea how to solve this problem!  Help

  Hello

  (1) when you get the error message?

  (2) program who worked on when you got the error message?

  The computer game to clean start State to check which program is associated with error.

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the above article.

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• ' Error' the settings saved on this computer for the network do not match the requirements of the network "while trying to connect to the wireless network

  Title: Cannot get an Internet connection!

  Connection Wi - Fi comes with a warning that 'the settings saved on this computer for the network do not match the requirements of the network"what should I do to get a connection?

  Hello

  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you follow the steps to run the troubleshooter from the
  link and check if the problem persists.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Method 2: I also suggest you to follow the steps from the link and check if it helps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 3: Follow the steps below to remove and add the wireless network.
  (a) click Start and select Panel.
  (b) select network and sharing Center and manage the networks without wire (on the left).
  (c) in the list, click on your network and Remove top.
  (d) you can then search for available wireless networks again and reconnect it to your network.
   
  Hope this information helps.

• 'the settings saved on this computer for the network do not match the requirements of the network.

  original title: securtity settings in my computers. where should I go and see what are my security settings?

  the settings saved on this computer for the network do not match the requirements of the network.

  where should I go and see the settings?

  Hello Arturito1,

  Thanks for posting in the Microsoft Answers forum! For assistance with your question, I would recommend that you follow the steps provided by Srinivas R in the thread below:

  http://social.answers.Microsoft.com/forums/en/vistanetworking/thread/a82432f2-9312-480A-b2ea-720033c73387

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• The use of .vas and for the script .lst files.

  Hello

  I'm working on a script about tiara for the treatment of the channels (involving Crash module). I saw a few scripts using *.vas and *.lst files to define variables and measures for different cases and all.
  I would like to understand more about the features of said make use in my scripts. I looked on the internet for explanations about the same but do not have something useful.

  It would really help me if there is some links or examples for them.

  Thanks in advance,

  Kind regards
  Fazil Shah.

  Hi faz_mah,

  In this case I recommend using two objects dictionary, TypeDict, and PriceDict, like I showed you above.  Or color you use the object than a dictionary and store and array values (type, price, etc.) with each name of the search.  Enumeration style variables "A" in the *.vas file have a static list of enumeration values and variables for enumeration of type 'G' in the file menu of *.vas their dynamic list of values from the file * .lst - which means that you would have to add rows at the end of the file list to add rows to the table of the above possibilities.  It would be faster and more easy to avoid the hard drive and use a dictionary object or two.

  If you're still not convinced, I can send you an example of creating a variable of type *.vas 'G '.

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• Configuring the private network or disable questions for the network discovery in network and sharing Center.

  I just got my laptop all cleaned and had everything updated. When I got it back I was mainly concerned how my network and discovery sharing would work, because we never had a home computer and a laptop computer at a time. Our PC at home has always defined for a private network. Today, they are both defined for the private sector, the laptop will probably always be at home too, but I was curious to see how the printer share everything would work on my laptop. It would not print and I checked just the settings that the guy I of any program for me usually had the top settings. On my laptop that I was first checking out and the network discovery has been to custom on both, one on my PC was on, laptop has never been verified we or off, file sharing has been enabled on both. public folder sharing off on both, printer sharing turned off the PC at home, but on laptop, so much time, I guess me to turn on the PC I don't know yet. Printer password sharing is on the PC and laptop. I try essentially whether it is what you would call a custom setting make for a firewall setting, or could someone please just kinda tell me if the sharing of network discovery should be turned on on the laptop and the PC, or was it not suppose to be turned on to the laptop, but on the PC only? Which should be lit and which should not be enabled in the configuration of the private network? I just want to be able to print my laptop if I want to. Thank you

  [Moved from the community centre of Participation]

  Hello

  What version of Windows are you using?

  This article was written for the two Windows Vista & Windows 7.  Drop-down menu (right) allows you to activate Windows Vista Instructions.

  http://Windows.Microsoft.com/en-us/Windows/install-printer-home-network#1TC=Windows-7

• restore service dependency for the network and sharing Center

  How to restore the dependency service or group who couldn't start for network and sharing Center?

  Hi patto1708,

  If it was something that was already previously and failed after certain activities on the computer for which you are not aware of, then the best possible thing to do is run a system restore. This will ensure that your computer is back to operational status.

  For more information about the system restore, you can see the link: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

  Or you may need to check for the dependency of the network and sharing center services and start them manually when they are stopped manually.

  See the link: http://windows.microsoft.com/en-US/windows-vista/Manage-services-in-Windows-Vista-from-Windows-Vista-Inside-Out to learn more about how to manage services in Windows Vista

  Kind regards

  SAP U G - Microsoft Support

• How can I change my email for my account and for the invoice address?

  I have an existing account, but had to change because of changes in the personal e-mail address.

  It is not a problem to connect with the new address and change the channels of communication.

  Everything works as expected.

  But I can't change the settings in the invoice. It the old address still - appears and emails all go.

  Manage your membership and your payment. Creative cloud

  https://helpx.Adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )