Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

Similar Questions

• No sooner, I get up and ongoing enforcement, when my computer needs to "Set up the updates" don't shut down computer! And then it's 'Shutting Down' that takes forever. Help! Is it possible to stop this configuration? What is it? I need.

  stop the configuration on my computer

  Hi booklubber,

  Thank you for visiting Microsoft Answers.

  As these updates are very useful for your operating system works better, you must update these updates on your computer
  1. download these updates on your computer.
  2. try to install.

  If this is not possible in normal mode, then place the clean boot computer and install updates.

  To perform a clean boot on a computer that is running Windows 7, follow these steps.

  1. click on start toreduce this includes this image, type msconfig in the Search box and press ENTER. Collapse this includes this image if you are prompted for an administrator password or a confirmation, type the password or click continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the Load Startup items check box.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.

  5. click on OK.

  6. When you are prompted, click restart.

  7. after starting the computer, install the updates.

  If this does not work, try to reset the windows update components.
  1. click the button to fix in the following link: http://support.microsoft.com/kb/971058
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  Note this fix it Solution has two modes by default and aggressive. You must run the fix it solution in default mode and determine if it solves your problem with Windows Update before running it in aggressive mode.

  Swati K - Microsoft support technician
  Visit our Microsoft answers feedback Forum and let us know what you think.

• At the start of my laptop in MS Vista, an error box will appear 'PhytonDLL26 failed to reinstall. Sombody could you please tell me how to fix even that the computer shuts down.

  I tried reinstalling several times but with the same result.

  Hello

  You have made any changes to your computer recently?

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you run the System File Checker and verify.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  See also:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

• every time that the computer shuts down, (IE Automatic updates), recent documents is empty.

  original title: recent documents: every time that the computer shuts down, (IE Automatic updates), recent documents is empty. How do I prevent this? Very frustrated Ruth

  Recent documents: every time that the computer shuts down, (IE Automatic updates or I turn off during the night) recent documents is empty. How do I prevent this? Don't know if the following has nothing to do with it, but - about 6 months ago I reinstalled XP, since then I have no sound and comes to the foregoing. Oh and to add, at the same time, I've changed hard drives up and down, which means that I have and that he had 2 hard drives.

  Very frustrated Ruth

  Hello

  Try the steps below to solve the problem.

  Caution:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  (a) open the registry editor and navigate to:

  HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer-advanced

  (b) save the key in a file. See the article of support upward.

  (c) the value of Start_ShowRecentDocs as a result.

  (d) value of 0 - list of my documents most recently opened is disabled
  Value 2 - list my most recently open documents is enabled

  Note: set the value to 2.

• error 1321: NTauthority or Services and controller app sez he has a problem and the computer shuts down

  sez no authority trying to run AVG or Malwarebytes - every 1/2 hour or if some "prog system? NTauthority or Services and controller app sez he has a problem and the computer shuts down

  Hello

  • What is the full error message?
  • What were the changes made to nfore this question?
  • What exactly do you mean by "no authority running avg or malwar bytes?
  It's a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.

• How can I get rid of the icon "shut down windows"? It appears from the beginning to the top!

  How can I get rid of the icon "shut down windows"? It appears from the beginning to the top!

  Hello jsitch, This thread has been created in the forum Desktop and personalization; the Microsoft moderation team has moved this thread to the Performance and maintenance Forum.

• How can I configure drive extender? get an error when the computer shuts down say reinstall Extender player

  get an error when the computer shuts down say reinstall Extender player. ? What is it. Thank you

  Hi deener49,

  Please look at the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_other/please-reinstall-Extender-Player-invalid-or/86692b09-9464-E011-8dfc-68b599b31bf5

• Are there problems with Microsoft 7 and Frontpage 2002? The system shuts down when I try to add a hyperlink.

  The system shuts down when I try to add a hyperlink.  The hyperlink insertion page opens.  But when I try to click on the link that reads "Microsoft Frontpage has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  Edited to add: if I type in the hyperlink, it seems to work.  But in the past, I just clicked it.  But now when I click on it is when she stops.  Strange.  Did not this on the Vista computer.

  Hello CaptainKAG,

  Thanks for posting on the Microsoft answers Forum.

  I recommend you post in the Forum Office where this problem is related to FrontPage 2002. We can install on Windows 7, but is not fully compatible, so some features may not work properly. Office 2003 and Office 2007 are fully compatible with Windows 7.

  Click here to post in the Forum Office.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• an error message appears indicating the pc has a problem and the computer shuts down

  an error message appears saying the pc has a problem and the computer shuts down.

  What do you do when this happens?  It is the way in which computers to protect the components of your computer.

• Wireless use USB ports locks and prevents the Windows shut down

  Hi all. Faced with this one.

  Computer is the laptop, HP Pavilion DM4 - 1150ca. 4 GB of Ram, 150 GB HD

  OS Win 7 Home Premium 64-bit, SP1 and latest updates installed

  Problem: I have 3 ways to connect to the internet: 1 Dongle USB (Device Manager calls "Remote NDIS based internet device for sharing". No problem connecting to the network and to the internet with this device. 2. built in WiFi adapter, "Intel Centrino Wireless - N 1000 and 3. External antenna for high power USB and USB «Realtek RTL8187» adapter Medium 1 and 2, I can normally connect to the network, get decent speed but he declines quickly and then to a random period, usually within a few minutes, I lose my internet connection, and finally my network shows disconnect icon. At this stage all 3 of my USB ports are locked up, removal of the WiFi device does nothing, don't disconnect sound and no USB device is recognized if I try their connection. In addition, Windows will not stop. I get a "shutting down" screen but it stays that way until the expiration time and finally restarts, screen asking if I want to start normally or in safe mode.

  Action taken:

  Several online sites checked and tried solutions including:

  RTL8187 uninstalled and reinstalled several times

  Uninstalled and reinstalled HP wireless several times

  Deleted (Device Manager, see all) entries while grayed, unused network

  So far, no joy, no change. Anyone have any new ideas? Thanks for any help

  Hi Raven,

  Do you have third-party security programs installed on the computer?

  Basically, if the internet works in safe mode and not works in normal mode, not applications or third-party security programs can be in conflict with the drivers from the internet.

  As a solution, I suggest to uninstall the anti-virus program and check if it works in normal mode.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Answer with the results so that we can help you even the question.

• When you download a new page, the page will move upwards a little, revealing the same page as, and then will go back down and full download.

  I have Windows 7 32 bit, Firefox 19.0 when I click to go to another page, sometimes the current page will move upwards a little, revealing the same page under. After a few moments, the current page will move down and then goes to the new page and download.

  Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, perhaps an addon intrudes here...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• H Satelite L755-13 - the speakers shut downs every few minutes

  I have experience with speaker problem. I have installed new drivers, even reinstalled new win7 64 bit.
  However, speakers shut downs every few minutes. If I start to use earphones instead speakers back in work.

  Please, help to solve this problem.

  How to understand this issue?
  You start your laptop and this computer you do exactly? What happens exactly?
  Is everything OK with headphones?

• HP Envy: a blue screen at startup, then the system shuts down its own

  When I turn on my computer, a blue screen appears and remains.  The boot sequence does not turn on and the computer shuts off after a minute or two.

  Hit the ESC key after that market puts me at the page 'option '.  'Advanced options', I tried "System Restore" and "Startup Repair" or solved the problem.  Failed to start in safe mode or change the boot settings because the sequence of starting (reboot) the system is broken.

  A hard system reset did not work and pushing the F2 key does not bring to the top of the page of diag sys.

  At this point, it seems that the only option on the left are trying to boot from a USB device or do a Reset from the PC (keep my files)?

  Any suggestion would be appreciated.

  Thank you

  It looks like you can have a hard/failed drive. If PC Reset is an option try it. If this does not work I would like to replace the hard drive and booting with recovery media to install Windows.

• Installation of updates and the computer shuts down

  By turning on the computer it goes to 3 of 3 updates to the installation, then stops. This happens several times and am unable to turn on the computer. I brought the laptop with Vista already installed on it, not so no disc
  I am out of resources on how to solve the problem!

  Hello Barby,

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe . When the Windows NT kernel detects that or the other of these processes has stopped, it shuts down the system and triggers the STOP 0xC000021A error. This error may have several causes. Among them are the following:

  • Incompatible system files have been installed.
  • A Service Pack installation has failed.
  • A backup program used to restore a hard drive does not correctly restore files that may have been in use.
  • An incompatible third-party program has been installed.

  Step 1:
  You can try the above troubleshooting steps I have provided about the "configuration updates 3/3. 0% complete".

  Step 2:
  Please follow the troubleshooting steps mentioned in the link below
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;156669

  Step 3:
  Otherwise, please try the steps below to restore your computer to the last working state.

  (1) start the system using a Windows Vista DVD.
  (2) system will ask you to «Press any key to boot with the CD or DVD...»
  3) press enter or another button to continue...
  (4) "thewindow installation" will open. Click Next.
  (5) choose the option "repair your computer" in the next window.
  (6)the system recovery options window"opens. Choose the Option 'System Restore'.
  (7) now select 'System Restore' window you invite, and then click Next.
  (8) he will ask the 'restore to choose Point".
  9) click in front of the box 'Show Restore Points more than 5 days'.
  (10) select the date on which Office worked very well. And then click Next.
  (11) 'drive to confirm to the recover window"will ask you choose Drive where the OS (Operating System) is installed." Click Next.
  (12) confirm your Restore Point window will be fast, click Finish.
  (13) A pop up you will be asked to continue the restoration of Windows. Click Yes.
  (14) the system will begin to restore the operating system for the selected restore point. Once finished with this the system will ask you restart indicating that the machine is restored successfully.
  (15) reboot the machine.

  By performing the steps mentioned above, system will be re-recorded on the date on which it was working fine.

  Note

  : S ' ensure that to disable your automatic update function after the restart, to avoid to automatically download patches.

  [If this post can help solve your problem, click "propose as answer" below or the "Vote as helpful" button at the top of this message.] This way you can help others find the successful resolutions of questions].

  ---

• Not sure if the computer shuts down on himself after 20 minutes of inactivity.

  Original title: pc stops some way?

  problems with a dell Windows vista pc. When not used for 20 minutes, the PC seems somehow closing mode, it is to say screen turns off and does not respond to any tax, but fans of the pc can still hear running. Just don't know what it is any help would be great

  Thanks for your help

  Matt

  Hello

  ·         Since when are you facing this problem?

  ·         How do you start the computer again?

  I suggest you follow the steps mentioned below:

  Method 1:

  Disable power options sleep. Follow these steps and check if the issue persists:

  a. open Power Options by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking Power Options.

  b. on the page select a power plan , click change plan settings under the plan selected.

  c. on the plan of the page change the settings, click change advanced power settings.

  d. the tab Advanced settings , buttons power and lid, expand the menu power start button, and then click setting, click the arrow and expand on sleep.

  e. click OKand then click save changes.

  Method 2:

  Update control and driver graphics card if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly