Cloning of the db to the new Linux box

Similar Questions

• Migration from the old to the new storage box

  O/s - AIX
  Present Storage - storage IBM XIV
  New storage - HP EVA 8400
  
  We intend to migrate from old storage to the new storage box. Here's the oracle servers.
  storage team and AIX o/s teams will migrate data from the old to the new storage box storage box. (step of migration include - backup of volumes of the o/s and even restore in new storage box).
  
  WHAT SHOULD DO ORACLE DBA, RECOMMEND SO THAT OUR ORACLE DATABASE SHOULD WORK JUST FINE ON THE NEW STORAGE SYSTEM? Please share your entries?
  
  My hypothesis: The o/s team as AIX will be due work migration preferred to be a s/n, we need not do binary oracle / oracle data files will be the same migrate to new storage box as it is. We being ORACLE DBA should simply ensure that we should have our oracle databases registered with us architecture.
  
  All Suggestions, questions are welcome, thank you friends.

  Yet once if administrators can make the local hard drive appear identical to the operating system when the contents of the disc is moved to the new storage unit you should not have to do anything. If the local drive cannot make it appear exactly the same that I would probably want to re - install Oracle and patch then just start my database to the newly built House. The note of Oracle on cloning Oracle Home can present a different option.

  It would be nice if this process has been run on a test server before production, because according to your window, you don't want to build a new House of Oracle after the migration to disk. I would like the House to be brought as part of the file movement or I would create before it is tested and ready.

  HTH - Mark D Powell.

• Can we have three sets of Essbase on the same Linux box?

  We have three versions of HSS and planning on three different servers to Windows - one for the DEV, others for the stage and TEST.
  We have also three mounted 11.1.1.3 Essbase servers on a 64-bit Linux (one for DEV, others for the stage and TEST).
  Install DEV planning could be confused as to which Essbase is using the address because they all reside on the same 64-bit Linux box?
  Did someone correctly set schedule with three Essbases on the same LINUX box?
  I asked precisely because install DEV planning seems to work but REFRESH planning filters is not created in Essbase filters.
  In addition, CSSexport does not seem to recognize security Essbase.

  Do you mean that it does not all filters or the worst.
  Did you give the user access Essbase writing role?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Image vs cloning on the new HARD drive with an operating system already installed.

  First of all, I'm NOT tech savvy.  I apologize in advance.

  After several warnings error that my hard drive was in danger of failing, I was finally able to install a new HARD drive.  Windows has had some difficulty in installing Windows 7 to new HARD drive, but I finally found a solution.  So here's my current situation.

  I have the main drive (old) (C:\) which has Windows 7 and all my data on it (it is a Seagate 1 TB HARD drive that came installed on my Dell Studio XPS 8100).  I installed a new WD Black 1 TB HARD drive and was finally able to get Windows to download on it (it reads now like two distinct? score?) E:\ and F:\) see photo.

  

  Now, my question is this...

  I want to save all my data from my old HDD and put it on my new HARD drive.  One that I have this, I would like to remove the old Windows 7 HDD and use it as "extra" space

  Make a clone of the old HARD drive to the new since I have already installed the new Windows 7 HARD disk?

  Please advise and please keep in mind that I might say things correctly and I can't understand though if the answers are on my level.  I appreciate any help!

  OK, so here is what I would do to try to avoid problems of compatibility or driver, as far as I can:
  -Turn off your system completely and unplug from the power outlet wall
  -Disconnect the old drive in your system (SATA and power cables)
  -Place the new WD Black on the main port SATA (should be labeled SATA0)
  -Turn on your system and put your OS drive you can do a completely new installation of the operating system.
  S ' ensure that you have updated all the drivers and the operating system after the installation
  -Turn off your system and plug your old drive
  -Turn on the system in the BIOS and make sure the WD Black has the priority starting on the old HDD
  -Boot into the operating system and copy all data from the start of your old disk partition that you want to keep for the WD Black
  -Go to disk management and delete the old boot partitions and the old drive system
  -The old HDD should be your secondary drive now and you can freely move files between the two disks
  N ' have in mind that due to the new copy of the OS, you must reinstall all the games and programs in order to operate because of the new system registry

  This should put you on the safe side and prevent any compatibility issue or driver which is possible during a clone or restore procedure. :)

  Captain_WD.

• Disable the new search box

  Hi, I tried the new area of research for a while, but I realize that I don't really like it. It feels very swollen. Can I disable and back the old box of simple search somehow?

  You can go back to the old search like this bar.

  Open Subject: config (typed in the address bar)
  Do a right click and toggle this false preference

  browser.search.showOneOffButtons

  Then restart Firefox.

• Problem with the new text box - large size

  Hello

  I have a problem with InDesing and just can't understand why it's happening.

  When creating the text box (frame), I am selecting the text tool and want to drag a new text box, InDesing creates a new frame with size 1221, 058 x 1221, 058 mm (always, no matter what...). When I'm typing in it, the text is invisible, in the same way that it is out of reach of the size of the image (at the bottom right I see the Red Cross). It happenes even after hitting only one character and I can't make it visible (adjust to the right).

  Someone has any suggestions how to solve this problem?

  I will be grateful.

  System: Win 8.1

  InDesign worm. : output 2015.4 CC / 11.4.1.102 x 64 build

  Best regards

  Andrzej

  

  First try: 101 troubleshooting: replace, or 'trash' your InDesign preferences

• Text appears in the new text box even if they say do not.

  So that's my problem. I'm trying make a text based game to learn a little more about coding, but even after looking around, I can't find a way to solve this problem.

  The point of the code is to have a type writer effect, I have a button to jump at the end of the timer and show all text at once, but because it doesn't seem to be part of the issue I failed it by below.

  What happens with the code below, it's that when the button is pressed a blank text box appears instead to display the new sting of the text. If the button is pressed before the end of the text by typing the text that appears in the following image will be the text which had no time to post.

  I tested with the 2nd fair framework be T1.text = "NewTexthere" and it worked properly but when the type writer effect is applied, is no longer works.

  -Part 1-

  Stop()

  T1. Text = «»

  var i = 0;

  var myString:String = "text".

  var mytimer:Timer = new Timer(10,myString.length);

  mytimer.addEventListener (TimerEvent.TIMER, timerHandler);

  myTimer.Start ();

  function timerHandler(event:TimerEvent):void {}

  T1. AppendText (myString.charAt (i));

  i ++ ;

  }

  Button1.addEventListener (MouseEvent.CLICK, fl_ClickToGoToNextFrame);

  function fl_ClickToGoToNextFrame(event:MouseEvent):void

  {

  nextFrame();

  MyEventArgs;

  }

  -Part 2-

  T1. Text = «»

  var i2 = 0;

  var myString2:String = "NewTextHere".

  var mytimer2:Timer = new Timer(10,myString.length);

  mytimer2.addEventListener (TimerEvent.TIMER, timerHandler);

  mytimer2. Start();

  function timerHandler2(event:TimerEvent):void {}

  T1. AppendText (myString.charAt (i2));

  i ++ ;

  }

  ---------

  Why do you use the appearance of string 1 frame when you define a new string under 2?  Why I increment when you use i2?  Between the two of you might find the problem.

  var i2 = 0;

  var myString2:String = "NewTextHere";

  function timerHandler2(event:TimerEvent):void {}

  T1. AppendText (myString.charAt (i2));

  i ++ ;

  }

• Confirmation to the new page box

  I created a confirmation box that is displayed when someone clicks on a button on my page, simply stating that the future will lose any current changes, they did. I've got the navigation works without problem. The thing is that I'm using a JavaScript control to navigate and not turned the page to the correct values on the new page, or if it opens a blank entry if a new should be created. I tried to empty the cache of the page, but which makes it just an entry blank anything. The JavaScript code that I use is:
  
  < script language = "JavaScript" type = "text/javascript" >
  <!--
  
  function confirm_response()
  {
  var response = confirm ("are you sure you want to open the communication log? \nAny changes will be lost. »)
  If (answer is true)
  {
  Window.Location = ' f? "p = & APP_ID.:4: & APP_SESSION.:4, P4_ID, P4_PARTICIPANT_ID.
  }
  on the other
  {
  do something else
  }
  }
  ->
  < /script >
  
  If I tahe the first 4 on 4, P4_ID, P4_PARTICIPANT_ID section, it just evokes the same entry over and over again. I need to be able to pull the top of the selected entry, or a vacuum if necessary. Any ideas? Thank you.
  
  Josh

  Josh,

  You are welcome. Don't forget to mark answers are useful or correct. It rewards those who hep you and others also allows to find a solution if they have the same problem.

  Kind regards
  Dan

  http://danielmcghan.us
  http://sourceforge.NET/projects/tapigen
  http://sourceforge.NET/projects/plrecur

  You can reward this answer by marking as being useful or correct ;-)

• Restore the virtual machine to the new ESX box

  Hello

  I'm new on this.

  I recived a set of virtual machines to another place and I want to restore to the newly created ESX. I followed the steps below to restore.

  Recived files:

  XX_YY. NVRAM

  XX_YY.VMDK

  XX_YY.vmsd

  XX_YY.vmtx

  XX_YY - flat hard

  After I copy all the files above using WinSCP, I could find the "XX_YY.vmdk" is copied to the XX_YY.vmdk.flatfile' which I have one copy of another on the server with the old name using the command #cp XX_YY.vmdk.flatfile XX_YY.vmdk?

  I copied all of the above files using winscp client.

  Open the VI client and browse the storage

  right click on the "XX_YY.vmtx" and add to the inventory

  Add to the popup to open inventory and asks me to enter the name of the template and that I have provided.

  In the next window, I click on finsih, I see the error: "the operation is not supported on the object.

  Any Document that would tell me more info on how to restore / import VM in my newly created ESX box?

  Thanks in advance

  Krishna

  The files are in the format of model already if not the following.

  Simply import the vmdk into ESX using "vmkfstools", then search for the data store, right-click on the vmtx file and select Add to the inventory. Also, you can simply rename the vmtx to vmx file.

  Carl

• I deselected "Show this dialog" when you open a file, now I need the new dialog box

  Ive tried "Reset all dialog boxes" under preferenecs, but it still does not appear.

  im a opening. File DDS. normally, a dialog box appears asking you what bit depth you want to open the file in but I deselected the option 'display this dialog box. now al my opening of 16-bit images

  To add to the post of Sudarshan, this is the button you click on:

  

• Oracle EBS: change the configuration of the new server

  Hello everyone.

  I'm newbie talk about administering Oracle EBS.

  This is the scenario:

  Oracle 11.1.0.7.0 database

  Oracle EBS 12.1.3

  The single node configuration: database of the layer and the application layer runs on the same server.

  OS: RHEL 5.7

  Virtual server.

  The IT guys have cloned the production server by using the virtual server administration software in order to create a new virtual server for development purposes. The production server has been cloned successfully, the new development server is a host name and IP address different of the production server.

  The head of the computer SCIENCE Department has asked me to work in the new development server. My goal is to change the configuration of the EBS:

  1. change the ORACLE_SID of the Oracle database.

  2. change the ORACLE_HOME of Oracle database and Applications: for example, current ORACLE_HOME is/U01/production and we need the ORACLE_HOME under/u01/development

  3. change the user and group of the owners of Oracle database and Applications directories: for example, current owner of the directories of Oracle database is oramgr user and need to change the owner of oradev user, same case for Applications: current owner of inventories of Applications is user applmgr and need to change the owner of appldev user.

  Of course, it is expected after making changes, the Oracle DB and Oracle Applications must be able to function normally, I want to use the scripts to start and stop oracle the bleachers.

  Is it possible to make the mentioned changes?

  Can you please guide me to do this?

  Thanks in advance guys!

  You will need to follow the steps of the R12 cloning MOS 406982.1 Doc - essentially you are going to use the current instance as the source and make a clone with all the necessary changes you listed, and then drop the source instance

• AF:dialog cancel the problem on the new line of VO

  With the help of 11.1.1.4.
  
  I have an af:popup that contains an af:dialog which itself contains entrable components mapped to attributes of VO, the first being an af:selectOneChoice (list of the part of the body). The list of the part of the body draws from a LOV configuration on the underlying VO attribute. LOV rowset is initialized in the model of the line layer whenever the popup is called to make sure that it contains all the allowed values.
  
  Everything works fine except when:
  
  (a) user adds a new row to the underlying VO and invokes the popup to initialize the values of the new line, and
  (b) the user selects a value in a list of the part of the body, and
  (c) user chooses to cancel the dialog box
  
  The PopupCanceledEvent triggers a Delete on the underlying VO in the case above operation, to remove the new line has been added.
  
  It all works very well, but if the dialog box is now called either for another new line or an existing line, the list of the part of the body indicates the value that has been selected to b) above and not on the value as it is in line with model (this has been verified). If I add and remove line using the Delete operation out of an icon above the table of VO (outside), then no problem. The problem is not correct itself unless / until the user goes in the new dialog box and completes the process of adding line by pressing the button of the OK dialog box. User can then delete this new line using the icon and then edit and add all operations work fine again.
  
  All about the model seems very well, the problem seems to be that the user interface components in the dialog box are not properly initialize values which I know to be in the model WHEN AND ONLY WHEN the dialog box was canceled on the addition of a new line (cancellation of a change does not cause the problem). I tried various RPP requests to try to synchronize the items with related values, but not luck.
  
  Does anyone have any suggestions as to what might be going on here?
  
  Thank you

  Check this box:
  http://www.adftips.com/2010/10/ADF-UI-resetting-or-clearing-form.html

  Thank you
  Nini

• from new text boxes, text is not quite all the way to the top

  I work off someone elses ID CS4 files and there is a "Preset" I can not understand how to disable

  With the new text boxes, I'm starting, the text is slightly lower than at the top left as it normally would be.  Ive checked the vertical offset, which is set to 0, also verified the inset spacing which is 0 on all sides.  This could be the cause?

  Check the options of text block. Looks like the first baselin is leading instead of ascension (nothing bad at all), or there may be an applied custom baseline grid (or even a ducment baseline grid) and the first baselin is lower than expected and calls for the alignment on the grid style.

• Beginner question - why the new pages always spread?

  Whenever I insert new pages to my doc, they're pasta spread, even if the master is implemented in a single page.

  In the workspace, spreads in the thumbnails of Pages dialog box. I don't want that.

  I want pages simple, stacked vertically.

  I deleted all the masters and made a new Master - a single page. When I insert Pages and add pages 3, 4, 5, they always display product.

  I've looked everywhere I can think of and you can find no place in the Pages dialog box to change this for simple pages.

  Thank you

  When you start a new Document, simply uncheck the pages box facing in the new dialog box.

• HP Officejet 6500 E710: How to create desktop icon to launch the Scanner dialog box?

  I would like to create a desktop icon to launch the Scanner dialog box. I'm not a fan of the approach to Tile Windows.

  Under Windows, 8.1, there was a desktop icon which allow me to connect to my Officejet 6500 unit and allow the scan to computer option. Who disappeared with the upgrade of Windows 10.

  I ran the print and Scan doctor and it solved the problems. When I went to test scanning, it arises from the familiar dialog box where I could choose different settings.

  It worked perfectly. But after having closed the doctor, I could not find any place to launch the new dialogue box, outside the doctor.

  I downloaded and installed the scanning HP and Capture app. It works very well, but I rather not leaving office to launch it, or use it enough to justify the taskbar setting.

  Is it possible to create a desktop icon for the application of scanning and Capture

  or

  is there a way to create an icon to launch the dialog box scan that print and Scan Doctor uses?

  I prefer this one.

  Hello
  
  Thank you for using the HP Forums.

  Is there a way to create the shortcut to scan on your desktop. Try the following steps:

  1. open a file Explorer

  2 C: > Program Files (x 86)

  3 program Files (x 86) > HP

  4 HP > HP Officejet 6500

  5 HP Officejet 6500 > Bin

  6 bin > Scanner HP

  7. right click on the analysis of HP and "create shortcut".

  You'll get a prompt that "Windows cannot create a shortcut here.  Do you want the shortcut to be placed on the desktop instead?    Select "Yes".

  Hope that helps!