Close the box of

Similar Questions

• I just updated my indesign to CC of CS5. One thing I notice which is annoying is some text boxes and images go live. For example, if you close a text box in CS5 you close the box you see reformat the text to set the new size. In the tex CC

  I just updated my indesign to CC of CS5. One thing I notice which is annoying is some text boxes and images go live. For example, if you close a text box in CS5 you close the box you see reformat the text to set the new size. In CC, the text does not reformat until you are done change the size of the box. It's the same for the images when resizing or rotation re. You don't know what you have until its finished. If you are a little guess instead of see what you're doing while. Is there a way to change this, or does anyone else have this problem. Maybe it's just what does CC. But I'm not a fan... Can anyone help?

  When using the image processing manages, click... for a while... then drag...

• I get a pop-up window at startup every time that says: "cannot open osoyugup.dll, Access is denied." I close the box and everything seems to work normally.

  Why do I get this popup each time, and how to fix it?  I did a system repair and re-installed xp pro, but the pop up still appears whenever I turn on the PC.

  See if the following sounds like your situation:
  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can still find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that systems currently has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Have a box of HP update; too small and click the update installation, cannot enlarge the box button install access, can not enlarge the box.

  How can I get rid of or access to a box to update from HP that I am unable to read entirely and also unable to extend the size of box click the button install. Cannot drag the box in the trash. Anyone know how to remove the box?

  To close the box, click on the red button X in the upper right corner of it.

  Size of the box is in it was due to a glitch. It happens from time to time and will probably not repeat.

  Rifdhan

• I have a statioery box that appears in the cenbter of my screen. Cannot close - the cursor moves UNDER it. How can I get rid of him?

  I have a box of stationery that opens in the center of my screen.  Cannot close - the cursor moves UNDER it. How can I get rid of him?

  Hello

  1. when exactly you get the pop up?

  2. What is the pop up to say?

  Additional information on the issue so that we can better help you.

• How to close the PrintDocument printing dialog box after pressing on it's Cancel button

  I develop using Windows 7, VB.net 2010 and dotnet 4.0.  The application is an x 86 application of Windows Forms using the PrintDocument class for printing.  After the call to PrintDocument.Print, the application manages the PrintDocument events and a print dialog box is displayed that indicates the number of pages that have been printed.  The print dialog box also includes a Cancel button.  I noticed that when a print job is canceled by using the Cancel button in the print dialog box, the print dialog box does not close until the underlying application closes.  When the compiled application is running, the application must close before to close the print dialog box.  When the application is running in the Visual Studio debugger, Visual Studio must close before to close the print dialog box.  The print dialog box also throws an error "a StartDocPrinter call was not issued" when you press the Cancel button.  Once you press the Cancel button, printing of dialogue "pages" message changes to "Cancel printing".

  Can someone tell me what I do wrong?

  The 'Microsoft community' focuses on the consumer.  You're more likely to get help in the MSDN forums or TechNet (links are on the forums to know which forum to post in).

  https://social.msdn.Microsoft.com/forums/en-us/home?Forum=whatforum&filter=AllTypes&sort=lastpostdesc

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=whatforum&filter=AllTypes&sort=lastpostdesc

• Cannot close the import dialog box?

  We scanned the photos of our printer in our Toshiba laptop.  The dialog box import returns to ask us to continue to import.  After clicking on OK, scanning continues.  After the picture is imported, we want to close the dialog box, but it does not close.  We can only reduce.  Then after we have the computer shutdown dialog box will disappear.  Thoughts?

  Hello

  You use any third-party application to import pictures in windows 7?

  I suggest you to change the import settings and check if it helps.

  1. connect the scanner to your computer via a USB cable and turn on the scanner.
  2. in the Autorun dialog box that appears, click on import pictures and videos using the Windows.
  3. to change the parameters that are used when importing pictures and videos, click import settings in the dialog box import pictures and videos .
  4 change one or more settings in the import settings dialog box and then click OK.
  5. click OK to restart import pictures and videos. Type a label in the box mark these images (optional) , and then click import to import your photos
  and videos using the new settings.

  Check if the import area closes after importing the photos.

  See this link:
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Also, disable any security software and check if it helps.

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus
  software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the
  Internet or network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Close the other forms box in navigator under Tools

  Hello

  How to activate the box (close other forms under Tools) by default for specific users or through the system.

  Is there any profile for it.

  Thank you

  Ravi

  Not that I know of.

  Thank you

  Hussein

• I'm trying to refresh for CS6 bridge and the dialog box always tells me to close the bridge first even if the bridge is not open

  I'm trying to refresh for CS6 bridge and the dialog box always tells me to close the bridge first even if the bridge is not open

  Bridge is probably running in the background.

  Error "Setup cannot continue until...". Adobe Bridge is closed. Installation | CS5

• Close the Popup by clicking on the OK button on the dialog box information Message

  JDev ADF BC 11.1.1.5.0
  
  I have a popup and a dialog box on the inside where the user enters data and click Save.
  I show an Information message when the click on save on having managed the insertion of data in the database.
  What I want to achieve, it's that I want to close the popup window with the click on the OK button located in the information message dialog box which has proved on memorizing data.
  There is already a similar thread Close popup in adf , but that was not a correct answer.

  (1) linking the main popup to a bean variable:

  public class MyBean
  {
    private RichPopup myPopup;
    ...
  }
  

  (2) add a DialogListener to the of the informational message:

  
    
      ... Info message here ...
    
  
  

  (3) use this DialogListener to close the main popup programmatically:

    public void infoPopupDialogListener(DialogEvent dialogEvent) {
      myPopup.hide();
  }
  

  Dimitar

• Cannot close the context Message box must face.

  To display a message on the change tab, I gave context message must face on DisclosureListener of the tabs.
  
  FacesContext.getCurrentInstance () .addMessage (null, new FacesMessage (MyMessage, FacesMessage.SEVERITY_WARN, null));
  
  The message shows on the top left corner of the page jspx. Also, I am not able to close the message. But if I click outside of the message box, i.e. any other position in the page, the message box will...
  I use JDeveloper 11
  
  Published by: Briston Thomas 20 May 2009 22:05
  
  Published by: Briston Thomas on May 25, 2009 05:03

  Hello

  Why is it you are using error messages - is it for the purpose of error? -Why do you not use popup with a message?

  Kind regards

  Branislav

• Do not forget to passwrds for sites will not be checked... when I close Firefox and reopen it, the box is unchecked. How can I keep it checked stay?

  Sites passwords are stored, but still not "active"; I have to go to options/security and check the box remember passwords at each Firefox session. Didn't used to be this way. Apparently one of your recent "improvements" have lowered the this function for me. How can I convince to save this setting?

  Read the following article.

  • How to fix preferences that will not save

• Is it possible to close the titles so they load in RAM until I tell them?

  I want to build my Orchestra until I play on the instruments. He ends by 165 securities loading from above all Kontakt 5.
  My problem starts a little after I loaded my project. My CPU bird up before I even play. That is not surprising that many tracks but can I somehow closed the tracks in my project? So my computer don't have to load anything until I have to say. I am aware of the Frost farm of, lock, mute buttons. But none of them really close the tracks. Somehow, I want to be able to force my project to open without loading all my instruments until I have actually say this to load a specific track: Pei

  Maybe I'm just dreaming? And the only solution would be a bigger computer: Pei as 12 hearts haha...

  Thanks in advance,
  Michael

  Hmmm, keep them loading...

  And neither of the two below answer to your problem?

  When Show Advanced Tools is selected in the Advanced preferences pane, you can freeze one track, reducing the computing power required to read the title. A reduced freezing track usage of the CPU than a track high-resolution audio without effects plug-ins, regardless of the number or complexity of plug-ins actually used on the track. Freezing is especially useful for software instrument tracks and audio tracks that use complex effects. Freezing is not available for software instruments several outputs.

  When you freeze a track, the track is rounded to an audio file. The gel file includes the output of any plug-ins on the track and any automation track. While the track is frozen, the gel file reads instead of the original track, which is temporarily disabled (including plug-ins). The channel strip controls (for example track mute and solo) are available, but no content track cannot be changed (including mute of the region and solo, for example).

  Even if a track is frozen, it cannot be changed. If you want to change the track, you can free an it, make the changes and then freeze again the track.

  Gel is designed to work around very CPU process, as software instruments with an architecture complex voice and complex plug-ins (such as reverb, filters or effects by FFT). If your computer allows to calculate all the active processes in real time, the titles of freezing is not necessary. Freeze tracks is recommended when the securities with processor software instrument or effects plug-ins are in a final State, or require no subsequent change.

  In freezing the slopes, you can:

  • Use plug-ins or additional software or audio effects software instruments instrument of additional tracks, which would be normally impossible it would exceed the limits of the CPU of your computer processing.
  • Read the projects created on computers with more CPU power.

  Freezing a track

  1. Click the Freeze button in the header of the track. The lock will turn blue to indicate that the track is ready to freeze.
  2. In the track Inspector, choose a Freeze mode:
     • Source only: Freeze the track without any signal effect plug-ins. When selected, the Freeze button becomes solid. Note: This Freeze mode is useful when you use software instruments much the processor or flex modes.
     • Pre Fader: Freezes the signal of the track including all effects plug-ins. When selected, the Freeze button shows a point.
  3. Click on the Play button in the control bar.
  4. To unlock the track, click the Freeze button again.

  To change the State of freezing of several tracks, click and hold the Freeze of a track button, then drag the pointer upwards or downwards. The buttons of the freezing of all tracks are critics put you in the same condition.

  If you try to make changes to a frozen track, a dialog box tells you that the track is frozen.

• Why FireFox looking for 'Chrom '.... "when I close the tag (last) left and report ' can not open...? I missed an option that it would send to my hom

  If I close the last tab (on the left) to go back to my office, firefox attempts to load the reports to me that it cannot find the server and google Chrome.

  Apparently, I missed an option in the help section that prevents this. Any ideas?

  Hello

  To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• Unable to write by e-mail to in the box. I tried the compaction, but TB goes for several hours and then stops responding. I erased my in box on the server.

  I'm now 17 nstmp folders. my 3 TB drive C is only about 60% full. It is true that I've never compacted my Inbox before. I currently have about 1169 messages in the box. my server is POP3. mail.armscomm.com network solutions. I am able to download mail on another computer using Outlook Express. ask if you need more information

  Jonathan arm

  There is another way. I just try and avoid it.

  • It is essentially a compact manual.
  1. Create a folder in Thunderbird and copy all mail in the Inbox.
  2. Go to the menu Tools (alt + T), and then select account settings
  3. Select the server to the account settings (or if it is a local folder or a problem of global Inbox of local records)
  4. On the right at the bottom of the screen will be a local directory. Click Browse.
  5. In the window that opens on the right click on the highlighted entry and select Explorer. This should open windows Explorer to the folder that the file in question is
  6. Close Thunderbird by clicking Cancel on all Thunderbird Windows, you opened, and then the X
  7. Delete the Inbox and Inbox MSF files
  8. Restart Thunderbird
  9. Copy your mails to Thunderbird created when he started toward the top of the Inbox.
  • Thunderbird has its own javascript engine, it is part of the program.
  • Reinstall Thunderbird will not help because the problem is with your profile and who is unaffected by the resettlement process.