close wall front upper vi slot while front vi run
Hello
I wrote a program of wiring and have several (many many many...) VI that launches Sub - VI with the front.
Here Sub VI during, the front face of the Top - VI bored behind...
Is it possible to hide this Panel before while the Subvi is running.
Thank you
Sorry for this post, I have not read all the responses of the subject as follows:
http://forums.NI.com/T5/LabVIEW/closing-front-panel/m-p/300115
Falkpl VI:HideFPvi.vi 24 KB is a very good method for my VI.
Sorry again, hope this will help someone
Tags: NI Software
Similar Questions
-
Open just close vi front panal
I have a sub vi that returns a true or false value. I uses a box to open and close the front paved the Sub vi. If it is true, I use a FP invokepen to open the sub vi and if false I use a FP invoke: close to close the front panal. The sub structure vi and case or inside a while loop. My problem is that an error occurs if a false is returned without the front panal is already open. Is there a different setting that I should use or is there a way to determine if the front panal is closed so I do not use the invoke FP: Close?
Thank you.
KNOEBEL wrote:
I didn't have to do it this way. If I use FPpen and FP: Close according to the value true or false I get always an error if set to False and the front panel is already closed. I don't know of another way to open and close the front panel, based on the State.
Yes, you will get an error if you try to close a panel that is not open. Ignore the error with the specific error clear.
-
FaceBook gives an alarm signal:... detected Malware via FaceBook on my computer... and their suggestion to install Maverick while I'm running on El Capitan... Apple recommends? ... and of course, this happens in the weekend... Please some advice...
Aalthough I've not heard of before, it looks like a scam. Nothing on the Internet can scan your Mac Malware or something.
I would also say that you don't take any advice someone on Facebook.
-
Can I turn off the display on the Qosmio X 770 while I am running programs?
Can I turn off the display of my Qosmio X 770 while I'm running programs such as virus scans to save power and the screen? Most laptops have a function key to enable this.
Hello
Of course you can do it.
You can change the settings of your central in Win 7 power management settings.Go to the control panel-> power-> Plan on changes of settings Options
Now, change the setting to turn off the display.
I would have put a minIn such cases the fi would not touch to the laptop for a min the screen turns off
-
Time for a while loop to run once
Hello guys,.
I want to measure the time for a while loop to run once. There is a piece of code raised. So I just created a simple VI to try, please let me know which is the right way to do it?
And I wondered, when I run the VI without highlighting the execution, he wouldn't give me a number, maybe it's because the code is simple and really fast? I have to highlight all the time?
Thank you
Not quite right. Both get primitive value time will run at the same time. use an image sequence to force the order of execution, as shown. I also brought in the relitve of accuracy seconds vi of VI. LIB\utilities because it depends on the clock of the system rather than the mSec timer accuracy.
-
Original title: wireless network connection wizard does not work
How can I get my connection wizard of wireless network to work when I get the RunDLL error "an exception occurred while trying to run 'wzcdlg.dll, FlashConfigCreateNetwork' I can see no wireless connections more. Not sure why all of a sudden it stopped working. Thank you!
Hi ChadWilliams_1974,
Try the following methods:
Method 1: Try the steps from the link.
Troubleshooting network connection problems:
http://www.Microsoft.com/windowsxp/using/networking/maintain/troubleshoot.mspx#3
Method 2: Reset TCP/IP Protocol, you can run the fix it from the link below and check if the problem is resolved.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357
I hope this helps.
-
Original title: continue to get an exception has occurred
An exception occurred while trying to run "appwiz.cpl C:\WINDOWS\System32\shell32.dll.Control_RunDLL . The other question is one that I posted yesterday that being to keep the screen with Oxffbadd11 seems to know one had this problem as one of soaps still responded to this post
Hello
1. don't you make changes on the computer before this problem?
Please wait for the response from Microsoft support engineer for the number that you have posted here.
Run the SFC scan on the computer and check.
SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
To run the System File Checker tool, follow these steps:
1. Click Start and type cmd in the box start the search.
2. right click on cmd in the list programs and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type your password or click on continue
3. at the command prompt, type the following line and press ENTER:
sfc/scannow -
Hello
I was able to set up compilation SDK and successfully the example program Login.java. But while trying to run it I get the following error: Please help me solve this problem.
com.sqribe.rm.ReportMartException:GsmNotFound
at com.sqribe.rm.SessionImpl.convertError (unknown Source)
at com.sqribe.rm.AASessionImpl.open (unknown Source)
at com.sqribe.rm.AASessionImpl.internalInit (unknown Source)
to com.sqribe.rm.AASessionImpl. (Unknown source)
at com.sqribe.rm.SessionFactory.getInstance (unknown Source)
When connecting. (Login.java:28)
at Login.main (Login.java:69)Hello
Check if the GSM service is running. Also check if the user is able to access the workspace without any problem.
Thank you
Nirmala
-
Using Player Adobe 11, now comes up with an error, once the file is opened. "Invalid Plugin detected, will waive the software Adobe reader." Close the program so cannot display PDF files. Running windows 7. I uninstalled and reinstalled the same Adobe. Help
It seems that something has been added in the folder on the drive. I would recommend http://labs.adobe.com/downloads/acrobatcleaner.htmluninstalling the program, running, removing any left over parts of the record player (this could be the problem), reboot and reinstall. If all goes well, that solved the problem. Future questions about the player, you should consider asking in the forum of reader, is not.
-
Increase memory resource limit while VM is running
Hi all
I have a virtual machine that is configured with 8 GB of RAM. I happened to look at the tab of the assignment of resources and noticed that its limit of memory is only 4 GB. Here are my stats client quick real memory:
Private: 4,09 GB
Transit: 221 MB
Traded: 0
Compressed: 0
Climbed: 3.28 GB
Compress: 415 MB
Active principles: 1.04 GB
My question is this: if I change the settings for this virtual machine while it is running and to increase the memory limit, what will become of the VM? It will slowly reduce his balloon, or should I it reboot?
The guest OS is CentOS 5.6 32-bit.
Thanks in advance!
Matt
By setting the limit that you forced the vmkernel to use memory ball - by removing the limit now allows the vmkernel provide the physical ram if available it sounds like it was available, but it takes time as you have learned.
-
I'm developing an application in which I call several Sub screws that contain a number of structures of the event. I have a problem that when I call such a sub VI control goes to this Sub VI and never returns to the main VI. I would like to return control to the hand once I close the fron of the VI called Sub panel. Does anyone have any solution for this?
Rgards,
Mansoor
Thank you Ravens.
Yes my event structures are inside while loops and all the code is inside a driving main while loop. Is it possible that I can cancel this main while loop when I hit the close button at the top right of the window?
-
When I'm trying to close the front cover of the MX922, the small paper support fold in.
I noticed that support for paper of my MX922 - the place where the printed page can be picked up - does not automatically close when I close the printer. Is - fixable?
Hello.
Troubleshooting with our support group will be necessary to narrow down the cause of your problem. Please contact our support group using the link 'Contact us' below for further assistance.
It has not responded to your question or problem? Find more help contact us.
-
White screen while laptop is running so close cover when starting
Whenever I close the lid right after turning on my HP DV6 want, and when I opened the lid, the screen remains blank. The system does not appear to be a 'sleep' mode because the lights of buttons and buttons are turned on and off. The sound can also be heard. But the screen remains blank. I have to force restart it. But if I leave the lid open when you turn on the machine, it works fine.
How can I solve this?
N ° never do this if you want a laptop to run reliably. It wouldn't matter if it's a laptop Apple or Linux computer. The same thing applies.
Closing the lid after booting and logging in the windows are OK, but not during the start or stop.
Torture test fragile devices is not a good idea unless do you for a living or have unlimited resources.
-
Developer of forms 4.5 - bring item displayed in the front when running
I have 10 items displayed square lined with 2 x 5 to represent a form of rectangle on my form. Individual display elements represent 10 posts on a pallet. Other display items are then used to represent an item it takes placed on a position on a pallet, so affectivly your dragging a point display ontop of another element of the screen.
My problem: it allows you to drag the item on it but it will not allow you do the reverse. Even if it looks like your selection of the top which is under discussion, forms think your draggin the square behind him? How can I change the focus of the display elements when running?I hope that your PC does not fail. You might have trouble to install forms 4.5 on Windows 7 or 8 platforms.
If I remember correctly, the only way to really check that an item displayed at the top of all the others is to put it on his own Web stacked with the same dimensions as the element. You can move the canvas integer autour rather than on the question, and if the focus is ON the element (by using go_item, for example), while the point will be on top of all the others.
As soon as another element receives focus which is located behind the canvas, the canvas will disappear.
-
Why close and restart after 1 hour, while I am still connected to my computer?
My computer restarts automatically after an hour and I lose and have to reconnect! Help! Don't know what to do! Have windows Vista Home premium. Never had this problem before, until now!
Hello
Check the Task Scheduler to see if you have anything put out there.
http://www.Vistax64.com/tutorials/132903-Task-Scheduler-create-task.html
---------------------------------------------------------------------
Could be linked to the heat, make sure that the computer has adequate ventilation, maybe use a small fan to
Add air flow. On a PC, the cards, the memory and the cable (both ends) will need to be reinstalled.
Remove all power and remove and replace those, don't do not just tight. Can't do that on a good laptop.
Also check the power supply Plan of Advanced Options to make sure there aren't some parameters here that cause
power off - Control Panel - Power Options.Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html------------------------------
Check with this utility, just in case there is a situation of blue screen.
BlueScreenView scans all your minidump files created during 'blue screen of death '.
accidents and displays the information about all crashes in one table - free
http://www.NirSoft.NET/utils/blue_screen_view.html------------------------------
Also do this so you can see the probable bluescreens. (You may or may not be able to see
them if they occur even after doing this according to the cause.)Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html=========================================
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Maybe you are looking for
-
video integrated in HP Pavilion 23-f450z TouchSmart All-- One desktop PC in
I plan to buy HP Pavilion 23 - f450z TouchSmart all-in-One desktop PC but before buying it, I was wondering if anyone can tell me what model of video card is on this computer. What it says on the Web site is "Integrated graphics - AMD" any informati
-
Voucher number - AP invoices in Microsoft Dynamics AX
I have a problem when I try to save the new invoice - everything is ok, but the dynamic does not generate a voucher number, when I finished. DOE anyone have similar problem? Concerning
-
an error occurred when checking for updates.
error occurred is all I ever get when I use the Help toolbar selection, "check for updates".
-
Display driver igfx has stopped working and recovered
While playing the sims 3 the screen goes usually black then back to the game. then it goes black again and the game will continue once again, the screen is much darker. the darkness of the screen comes and goes and seems to pass the game of light to
-
Sign in to Messenger can't mistake - 800488fb
Can'ts connect my Messenger because error: 800488fb please help me!