Clumsy exit for some records

Similar Questions

• I am trying to access my hard drive for some records and my file photo in windows vista after it has been formatted.

  My laptop after runing battery accident, I cannot restore and re-installed was the only solution, I thought I had backup all files, but my photo files is missing and an other files that were in my office. I need assistance to access the hard drive if possible, I said it can be done.

  If you formatted the drive and reinstalled Vista, data is almost certainly lost to conventional methods of recovery...

  You can try this program:

  http://www.SnapFiles.com/get/Recuva.html

  Recuva is a file undeletion tool that allows you to analyze your hard drives or media cards for files that have been deleted or formatted. It presents you a list of files that have been found, as well as an assessment of their potential for recovery, a preview option, and a hex viewer to inspect the content. You can limit your search to files of a certain type (e.g. images, audio etc.) and choose between a quick and a thorough analysis approach. The program also includes a secure deletion option that allows you to permanently delete files that were found while parsing, to avoid any future recoveries.

  If the above does not resolve the problem, you will need to contact the Date recovery Experts.
  Be warned: they are very $$$

  See you soon.

  Mick Murphy - Microsoft partner

• How to take the exit for some time on a loop to do comparison

  Hi all!

  I had a problem with my labview project, asking me to make the comparison with

  2 output values, both of which are within his time looping.

  To clarify this issue, I have 2 data entries, they are read in 2 loops while respectively once.

  Now I need to extract these values outside read the while loop to make the comparison. However simply

  the 2 outputs out of wiring to a comparison function does not work. The enforcement highlight function

  I can see that the data coming out of the loop!

  So, I would ask if anyone has any idea, thanks!

  Chao

  
  

• The default values on the retail block for dummy record gets inserted in detail blk

  Hi all
  
  I have a master block
  a block of detail and a detail for detail block block
  
  For every master I have or have no certain records in the block of retail
  
  for each master, I have a few detail records
  
  for each detail record I may or may not have the corresponding detail records
  
  Let's take an example
  I navigate a primary record to the detail record.
  in the 3rd block of retail, there is no record for the record in detail, but I have some default values.
  
  Now I navigate to the 3rd block of detail and I do not insert records and then exit the screen
  
  Here oracle asks me to save all the changes I made (I did no changes)
  and by clicking on Yes, there is a dummy record is created for a 3rd detail record
  
  Please help me
  
  Thank you

  This is the default values are to mark the block as being changed. That's why you get the message "do you want to save the changes.

  I suggest that you fill out elements of the base with the default values table and fill out the matching elements from the base on a prior insertion trigger table.

• a fusion drive is good for audio recording?

  I think buy a 27-inch iMac for audio recording on Logic Pro X, but is not sure a merger player performance, because some say that the part of the HARD of it on only 5400 RPM drive, if I hold with an iMac HARD 7200 RPM drive?

  You will likely get different opinions, but personally I would not use the fusion drive and recommend an SSD.

  Quite significant speed difference.

• Some records are not in my list of bookmarks; the individual bookmarks can be found in the search, but the record does not show.

  Some records are not in my list of bookmarks; individual bookmarks can be found in the search, but the folder does not appear in the list of bookmarks, and results do not indicate where the individual bookmarks.

  You can use an add-on to display add a column to the Library dialog box for the folder of the bookmark.

  https://addons.Mozilla.org/firefox/addon/show-parent-folder/

  The extension can indicate only the name of the folder or you can view the full path via the menu in the folder. This full path option is useful if a file accidentally gets you drag somewhere in order to explore the it and find it.

  To access the settings of the extension, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, find the Options button under the specific extension.

  A little luck?

• Are there drivers for the recorder sony icd-bp150 for windows 7

  Are there drivers for the recorder sony icd-bp150 for windows 7? I can't recorder to work with the current drivers of dvr3. It works on XP machines but not my computer windows 7...

  Hello sconley3.

  I did some further research and found that, if the worm Software Digital Voice Editor 3.3 is compatible with Windows 7 OS, the recorder itself is not compatible with Windows 7 OS.

  However, you can try to transfer the files from the recorder to a computer with Windows 7 OS installed in it, using the stereo mini plug cable.
  Plug one end of the cable to the headphone jack of the recorder mini stereo jack.
  Plug the other end of the cable to the Microphone Jack on the computer.

  You can follow the link below to transfer files using mini cable plug.
  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&externalID=C1002444

  Kind regards
  ColbyP.

• "Sweep left" does not work for some email notifications

  On some mail notifications, as documented works "sweep left" very well, but I'm still not clear what if any difference there is between 'X' and 'Clear' (see previous announcement) - I have recently several contradictory theories.  However, for SOME e-mail notifications, "left sweep" simply does not work - nothing happens.  I * think * it's maybe for 'complex HTML' messages, not 100% sure.

  Hi Doug

  As previously indicated, 'X' and are clearly part of the same key - typing will erase / reject notification from your list of recorded notifications.

  Also as previously indicated, there is a difference between alerts by mail in the list of alerts in the Notification Center (IE hitting swiping to the left on the alert) compensation and removal / rampage messages in the Mail application.

  More information:

  https://help.Apple.com/watch/#/apddca457a4f

  https://help.Apple.com/watch/#/apd29461a7b7

• I use a wireless modem to get on the internet at Virgin Mobile Broadband2Go device. Is it possible for some to get access to my PC, when this device is active?

  I have these multiple .exe running on my registry? security of wireless modem?

  I have 2 questions:

  1. I use a wireless modem to get on the internet at Virgin Mobile Broadband2Go device. Is it possible for some to get access to my PC, when this device is active?

  2. I think that someone is due to ghosting my PC. On my registry, I have 2 of the following: iexplore.exe attributed to administrator. Then I have an explorer.exe attributed to administrator. I have 6 svchost.exe running 2 assigned the Local, 2 assigned to network service and 2 running service attributed to the system. Can anyone provide an answer why I have these multiples, exe running on my registry?

  Thank you very much

  GreenGiant

  Hello
   
  Yes, it is possible to gain access to your computer; but not without your permission. The firewall on the computer prevents any unauthorized entry. Refer to the following articles.
   
  What is a firewall?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-firewall
   
  Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Firewall
   
  How will I know if a wireless network is secure?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure
   
  When you say "Record" do you mean "Services" in the Windows Task Manager. Its common to have these processes or services to run in the background.

  'iexplore.exe' means 'Internet Explorer'.

  'explorer.exe' means 'Windows Explorer'.

   

  What is svchost.exe?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-Svchost-exe

   

  You can scan your computer with MSE to check the virus or malware if it affects your performance.

   

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Hope this information is useful.

• Window Media Center! 10 GB for TV-record 30 minutes! Go Microsoft!

  As I said in the title, I usually record TV shows so I can watch them after school, then all of a sudden one day I discovered my hard drive was full... I tried to find the problem and found out it was the "recorded tv" folder which is sh * ting my storage. I take a look at the properties and shocks, each tv 30mins record contains 10 GB or more! Go! It is simply not true! No idea how I change it or compress the vid or just convert a .wtv for any folder that's NOT going to s * ck my hard drive! PLEASE...

  For ISDN (the Japan Broadcasting System), I don't know.  But brushing up on the specs, I can see why the size of your file is so huge - the bit rate is, well, pretty high (but, this picture has got to be so pretty!)  With a rate of 51 MB/s per channel, it'll do for some large files in a hurry.
  Here in the United States, ATSC (our over-the-air signal level) has a total ~19.4Mb/s rate (amount of signals of a station - up to 5 programs of the station).  Therefore, smaller file sizes.  (Cable is as a result, most of the time.)

  Why MC just write the bitstream (remember: the signal is already digital, and in a format that it understands) to disc and gives no possibility (at least here) of re - encode a smaller size?  Because it would take considerable processing power to do and would get more heavy you want to compress, or tuners more your are running.
  Is it possible to put MC to compress the signal?  For you, I don't know (but I guess that the answer will be 'no', just as it is here for digital signals.)

  For now, the best advice I can think of for you to get a more concrete answer would be to re - ask the thegreenbutton.com wire (it is recommended that post in the Windows 7 folder in the world).  There are some (not too many, I think; but a few) users to your part of the world who might be able to shed light on it a little more for you.

  Oh, and: I'm sorry for the price of HARD drive.  That sucks.  :(

  HTH,
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Access to another system of Win7 has stopped working for some reason any

  I have 2 systems Win7 Ultimate x 64 on a network. These two systems have been able to share files etc for a while using standard file sharing both in a home network. For some reason, I was on the road for a few weeks and when I came home and connected to the network I am more able to reach other Win7 systems.  I can Ping the systems IP address but not by name (I get the message "Ping request can not find host xxxxx.").  If I do a 'net view', I see the host name but can use net use to access the shared drive (error system 53). Since the home network, I can see the system and open the view which shows the 'Documents', 'Videos' etc., but records by clicking on the folders just returns without having to open the folder.

  Clues as to what perhaps is the problem or how can I do to diagnose the problem.

  Thank you

  Neil

  Neil Lamka

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Any idea on how to implement the discussions threaded for physical record in URM.

  I have a requirement of implementation of the functionality of dicussion threaded for physical records in URM. It is currently only available for electronic records only.

  Thank you

  Vanina

  We finally reached by taking the output of the component box discussion threads and rename all the services, change some db queries (since all the material metadata element are present in different tables) and also by the way dSource = physical parameter so that the system makes a distinction between electronic and physical records. Also I am not suggesting to ovveride resources of the existing component rather get all resource definitions in your new device. This will eliminate the dependence between two components, and each will work independently.

• IOM 11 GR 2 - Configuration of automatic approval for automatic recording - organization field

  Hello

  I am trying to configure automatic approval of record auto in OIM 11 g 2.

  I read a lot of links (a relative majority of 11 GR 1 material) but I'm still not able to do this due to the field of the organization being approver only

  I tried to use an adapter to prepopulate (as I do with success with the 'role' attribute) and a search query. None of this has worked.

  I found out that someone did the same steps as me, but the debate is closed without response: Re: configuration of automatic approval for automatic recording - fail because the organization.

  Any advice to achieve this in GR 2 11?

  Thanks in advance

  This message was edited by: 2808590

  In the case where a person is confronted with the same question, I solved it by using an event handler to pre-process on user create.

  The following link can give some advice: identity and access management: automatic approval for Self-Register users - OIM 11 g R2

  To get dynamically key of the organization by the name of the Organization, you can use it in Manager:

  The value attrRet = new HashSet();

  attrRet.add (OrganizationManagerConstants.AttributeName.ID_FIELD.getId ());

  Organization org = orgManager.getDetails (orgName, attrRet, true);

  Object orgKey = org.getAttribute (OrganizationManagerConstants.AttributeName.ID_FIELD.getId ());

  return (Long) orgKey;

• Running in a book headers are empty for some files of the book?

  12 of FrameMaker unstructured: I have a file of a book with several chapters in separate files. I also have a template file that is used to control all the files in my book. In this template file, I have the system variable running H/F 2 header on a master page. It comes to show section 1 - level chapter in a header on each page name. I use Formats of file/import/order with all selections containing the tag to import all the common parameters of my template file in each book file of. All files use layout unique face with right master page only.

  For some reason, most of the book records shows no chapter running name in the header. Some files display properly. What could be the problem here? All files must have been prepared in a similar method. How can I make sure all the pages show header running names?

  Large. Maybe you can mark my answer as "Good response" so that this thread is not open.

  Thank you :-)

• Report of the Summit with the details below for a record

  Hello

  I'm looking for an answer to my problem:

  We have a report that contains many ~ 60.

  And is not very user-friendly because it is so wide table.

  It is possible to see some less important columns as information additional report below.

  for a single record in the report. For example, the user selects the radio button of the first column and details are updated for this record.

  (if it is possible to group information in tabs)

  Thank you very much for your answers.

  Hello

  Here is an example

  https://Apex.Oracle.com/pls/Apex/Apex/f?p=39006:41

  Create a hidden item which is not protected. In my case the name of the element is P41_DEPTNO

  First report query

  select
  APEX_ITEM.RADIOGROUP(1,DEPTNO,:P41_DEPTNO) AS rg,
  EMPNO,
  ENAME,
  JOB,
  MGR,
  HIREDATE,
  SAL,
  COMM,
  DEPTNO
  FROM EMP
  

  Second report query

  select LOC,
    DNAME,
    DEPTNO
  from DEPT
  WHERE DEPTNO = :P41_DEPTNO
  

  In the second region report defined the elements of the Page to submit your name for the hidden item.

  Create dynamic action

  -event: change

  -Selection Type: jQuery Selector

  -jQuery selector: input [name = f01]

  -Action: Value set

  -Set type: Expression JavaScript

  -Expression JavaScript: this.triggeringElement.value;

  -Selection Type: Item (s)

  -Article (s):

  Then add an another true dynamic action event

  -Action: update

  -Selection Type: region

  -Region:

  Kind regards
  Jari