CMD 'net view' to show the other operating systems.

Similar Questions

• Hi all, I want to know what can I complie forms in windows and run the file met in the other operating system

  Hi all, I want to know what can I complie forms in windows and run the file met in the other operating system

  3177349 wrote:

  Hi all, I want to know what can I complie forms in windows and run the file met in the other operating system

  It depends only on the BONE of the application server.

  If your OS development and OS is different, you have to compile the fmb in the server again.

  Hamid

• How can I change the file permissions that are made in the other operating system on the same machine?

  Hi all

  I installed 2 operating in two different drives (drive C & D) systems in the same laptop.
  Recently I have re-installed the Windows7 operating system on drive C. And formatted the D drive. Now, I have a BONE in my system.
  Now the problem is, I can't open some video files (the names are colored in green) who says that you have no permissions.
  I found that "Encrypt contents to secure data" is enabled in advanced of this specific file properties.
  When I go to turn off this option, it says that you have no permissions. It shows the name of the owner as a previous user of the operating system
  in the other disk drive D (that I already formatted)
  How can I get out of this problem?
  Thanks in advance.
  Balu.

  Hi all

  I installed 2 operating in two different drives (drive C & D) systems in the same laptop.

  Recently I have re-installed the Windows7 operating system on drive C. And formatted the D drive. Now, I have a BONE in my system.

  Now the problem is, I can't open some video files (the names are colored in green) who says that you have no permissions.

  I found that "Encrypt contents to secure data" is enabled in advanced of this specific file properties.

  When I go to turn off this option, it says that you have no permissions. It shows the name of the owner as a previous user of the operating system

  in the other disk drive D (that I already formatted)

  How can I get out of this problem?

  Thanks in advance.

  Balu.

  If encryption is not involved (if you do not encrypt the files originally) and is just a file permissions problem - simply take possession of the files first and then change the permissions when your account has full permissions on the files/folders that you need.

  If you do not backup your encryption certificate and key encryption is involved, then the data are almost lost to you.

• Someone was able to get the TOP of direct exec to show the other than 0% cpu %

  Someone was able to get the TOP of direct exec to show the other than 0% cpu %
  for all the processes... I've tried it on anf 3.2.6 now 4.0.3 and it still says 0%. Envoy in trouble months ago... Runnig im opensource hyperic on a system of ubnutu 6.06 linux
  Architecture: x86_64
  2.6.15 - 53-amd64-Server

  Mike,

  Here is the bug report that I mentioned when I said that it should be fixed in 4.1.  Now he says he's planned for 4.2.  I swear it says 4.1 when I modified looked at him.  :-(  If all goes well a fix will make it in 4.2. Maybe a 4.1.x if we are lucky. :-)

  http://JIRA.Hyperic.com/browse/HHQ-2678

  Brian

• What is the best operating system to upgrade from Vista? Should I buy Windows 7, 8 or 8.1?

  I have Vista 32 bit Home Premium.It does not support Windows Mail.Which is the best operating system to upgrade from Vista? Should I buy Windows 7, 8 or 8.1? I do not have a touch screen system, my system is five years old.

  Original title: upgrade

  Hello WilliamPopat,

  If you want to buy an another operating system, you would do better to buy the latest version, i.e., Windows 8.1 it doesn't matter that you don't have a touch screen like Windows 8.1 will work just as well on a desktop PC / laptop normal.

  However, before rushing and buying a copy of Windows 8.1, I suggest that you look at this link http://www.eightforums.com/tutorials/11885-windows-8-upgrade-assistant-download-run.html the link above shows Windows 8 Upgrade Wizard you can download (free) and allows you to check that your PC is compatible with the latest version of Windows.

  According to me, one of my office machines is around 5 or 6 years and Windows 8/8.1 works fine on it.  However, it is best to check your own machine with the wizard upgrade just in case.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• My intex 3g data card cannot connect to the windows operating system 8, why?

  My intex 3g data card shows the following when connecting to the internet in the windows operating system error 8. The error message is "the system cannot find the directory entry for this connection".  but I can't use the telephone connection. Please find a solution for it.

  Hello! There is another easy method.

  1. install the compatibility mode Windows 7 driver.
  2. right click on computer and select manage, then go into the Device Manager.
  3 see. you other disks with the triangle on the bottom icon, right click and select Update driver software.
  4. Select Browse my computer for driver software.
  5. now, the path should be "C:\Program Files\Intex speed 3.5 G Datacard" with subfolders include verified.
  6 do this for all 3 of them and your drivers will be installed.

  FACT! Enjoy now.

• Performance problem with the guest operating system

  Hello gurus - I have one of the most unusual questions, I ran into a few time.   Here it is:

  I have a guest w2008R2 OS - installed in a 5.1 version of VM 7 vSpherer - which has an Emulex LPe 12002-E 8 GB dual HBA port is assigned to the as 2 PCI (1 device per port) via DirectPath devices

  The guest operating system has an application that performs backup tests.   WWPN of the HBA is zoned in the fabric and declared in the interface of Compellent Storage Center and everything is good here. the application creates a replay of a volume, mount it as a drive, read all the blocks, then dismantles and moves then repeat the process with what ever additional volumes should be safeguarded.   It is so cool I have do this with a VM right and not a physical host?  (would be cool if I had work NPIV but that's another story, not with technology HBA vendor support...)

  So, what's the problem?   Well, the bed the mounted disk backup will work extremely slow as slow as 5MB\sec flow, then during any other activity takes place on the system the flow jumps up to 150MB\sec all of a sudden and will continue to run fast for a long time and finish jobs on time with each work taking a little more than an hour.  But when the slow going the same work (all jobs are the same, they are simply by reading all the blocks of a bunch of 200 GB volumes and wrote a set of NULL value, do not forget this is just test) takes up to 10 hours to complete.

  I think that what is the culprit?   POWER MANAGEMENT.

  I have just about each performance counter and the journal of events known to man and I don't see anything abnormal on the table, ESXi virtual machine, nothing.  But what I see in the newspapers is any kind of activity that could happen in a transparent manner to save energy.

  FACTS on this case:

  -Reservation of memory is defined (it must be for directpath otherwise, you can't power on the virtual machine)

  -Booking CPU - has not been defined before an hour ago, I gave her just a small reserve for this rule, so I do not know if this will help alleviate the slow flow, or have an effect on what I think is a question of power (unit linked) management

  -windows power management is set to high performance never-ever - but not until an hour there doesn't I changed advanced settings for USB Disabled------turned off.  PCI peripheral energy saving setting was already off.  Which is in contradiction with my theory.  But maybe, just maybe, something is broken somewhere, or could be a bug... blah blah blah

  -the HBA, Emulex, as it appears in Device Manager in the guest OS doesn't have a power management tab to disable the feature, I don't see that the adapter VMXNET3 had this tab, and I turn off the power save setting to be conservative, do not think that it was the culprit, but as there is no real data running through the NIC.  The data is simply to be read from the disk mounted, not copied on any wire Ethernet.  never the less, in the Emulex properties is a Details tab and a selection of power data, and performance data indicate you what power mode, the device is, as well as feeding supported systems.  D0: full power, but D3, which shows as supported by the device, is an energy saving mode.   I could not yet attend the setting at the time of slow activity, my good intention as soon as possible. He is currently shooting in D0, full power.

  This is so what I have to offer on this, I hope that its just...   If I'm missing something, or if others have experienced this massive loss of unknown flow without reason and have resolutions, please share.

  If there is a way for me to disable power on the Emulex HBA management inform you please, I don't mind if I stop to enter the firmware, if that was even possible.  But if possible I would disable it immediately before any new tests are executed.

  The root cause of this issue has never been identified by VMware support which for me is a question of ugly.  Reservation of CPU for the VM using directpath IO with HBA installed in it corrected the problem.  I'd be leary with direct path IO.

• CPU pegged at 100% in the guest operating system

  Hi all

  New to this forum, so I hope I'm posting in the right place. Note that I'm not our VMware admin, but rather, I have a server I have to admin that has been converted to VM via the P V. apparently process, our group has converted nearly 50 PMs successfully and of course one of mine is the only one who has a problem now. We have a custom application that has been developed to synchronize data between ESRI GIS and databases SAP. The code is about 7 years old and runs on a version of Oracle (9.2) and is Java based, both on the same vintage. It is not possible to upgrade by the creator going out of business and not having is not the source code. I ask this to understand that the problem is probably with the programming, but thought it was worth it.

  Anyway, one of our guard batch process fail with a Java out of memory error on the virtual machine. It works well on the PM. A consultant ran the diagnosis with a Profiler memory on the virtual machine and concluded that the program never went beyond 256 MB and we have 1 GB allocated to the guest. We now consider the CPU issues. The only other thing we know is different is a matter of hyperthreading (HT). The PM is certainly HT'd (1 physical CPU showing that 2) and it does not appear that this setting met on the virtual machine. When you run the package on the PM, we see 2 CPUs in the Task Manager, and neither hits 100% for more than a few seconds for the whole process. On the virtual machine, we see a flatlined CPU and it is 100% most of the time until it fails about 15 min in.

  The sysinfo on the virtual machine shows a 2400 MHz CPU, while the PM shows (2) 3400 MHz CPU (due to HT). I checked all my other virtual machines, and they are all 'show' 2400 MHz, so this must be a virtual standard machine type? I think that the virtual computer guest has access to the CPU ramp according to the needs, but then I'm not clear why the task manager would show that he attached the entire lot? It is likely that task manager prompt indicates whether flatlined to 100% of a 2400 Mhz CPU, even if she isn't really the most? If this is really the most, our admin should not be able to increase the dedicated CPU (I looked at the console with him and did not see an obvious option for this)? Is it possible to enable hyperthreading on the * comments * OS to mimic what has had on the PM? We cannot add another CPU to the guest due to licensing issues. Oh yes, the guest operating system is windows server 2003 and VMware ESXI 4.1 server. Thank you very much!

  G

  The speed of the CPU that you see is the speed of the physical processor in ESXi hosts. You cannot increase this speed, however - licensing - usually, you can assign two vCPUs, virtual machine as a dual CPU core instead of 2 processors. This option has been added to ESXi 4.1. See http://kb.vmware.com/kb/1010184 for more details.

  What you need to do is to set the number of processors to 2 and add the advanced parameter cpuid.coresPerSocket = 2.

  André

• Trouble installing the guest operating system

  All,

  Having trouble installing the guest operating system - Windows XP SP3. I followed the directions of the booklet that I try to boot from a local image and a CD. I can't able to get into the setup of the BIOS to start the virtual machine when you press F8. I am currently on a decentralized network that starts his BONES from a PXE server. When I turn on my VM, its shows the boot process than my actual desktop. I tried many configurations, but still problems. All instight would be useful. Thank you.

  Welcome to the forums!

  To enter the VMWare guest BIOS press F2, no F8.

  You can also add 'bios. BootDelay = 10000 "in the prompt .vmx file. This gives you more time to press F2.

  The virtual guest has a CD-ROM attached to it?

  Is it "connect to turn on?

  Is it connected to the physical machine (where the OS CD is inserted)?

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Upgrade memory of the guest operating system

  Hello

  There is problem, increasing memory on the guest operating system.

  Here is the hardware config

  HP Blade

  Whe have 14 GB of physical RAM on this server blade

  ESXI 3.5 VM

  Windows 2003 guest entry (guest 2 OS) operating system

  Question:-we want to divide our 14 GB of ram in two comments OS 7 GB each.

  When connect us to OS there is no increase ram it shows only invited invited old config ram, how can I update to the new allocation of RAM on the operating system.

  Thanks in advance.

  No worries, consider the positions of marking as useful or appropriate if it's for you.

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• How to keep the controls panel/glance through the changes of fonts more small-medium-large screen made through a window to customize the Windows operating system?

  Hello

  My application uses digital edition, ring and other controls with chains of control/label mainly composed of EditDialogMetaFont size = 11 (all optimized for the smallest font setting in a customization of the Win operating system window). When the user changes the font to the medium setting for example the police of all labels and controls is changed size = table 13 and all labels are misaligned with some labels even extending lines of Panel and thus become partially visible. How to deal with this situation, please?

  Thank you

  Martin M.

  The description of the metafonts sheds some light on this issue; It basically says that for a police metafont predefined size is not an absolute value and can change... The solution uses the fonts provided by the operating system, for example, Arial.

• Need help to restore my laptop to the original operating system is

  I accidentally installed 3 different operating systems on my laptop on a hard drive external that I had saved them on because we have hacked a year ago on 2 of the 3 calculates so my son saved our systems for us in case it happened again. Now, I have all 3 on my laptop and need to restore my laptop to its original files. I have a mixture of things here on my PC and my husbands xp and my laptop vista. Help. I don't know if the other 2 systems can be saved on my external hard drive or not. I have my product key for 3 computers.

  You are welcome.

  As you never have a drive to buy, this is how you should be able to reinstall Vista on a Toshiba using the recovery partition:

  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletinDetail.jsp?soID=2737864&PF=true

  You can see if it works but it is probably destroyed by installing these backup Images.

  If it is not available, try and get the Toshiba recovery disks or borrow a DVD of Microsoft Vista according to my first answer.

  See you soon.

• MCAFEE VS. NORTON 360 TO PROTECT THE VISTA OPERATING SYSTEM

  I have a Qosimio Toshiba computer and it came with trend Anitvirus software for the first year. I have the Vista operating system. I want to either update Mcafee or Norton 360. What is the best for my computer and do I uninstall the antivirus software of original Trend before or after the installation of the new software, and how do I do?

  Hello

  Frankly, I would not use all three, and never you have on the machine now that you must
  Delete (so you have only a major antivirus on the system) do not forget to use the removal of their creator tools
  or anyone who can leave problems using scraps.

  Download replacements, but do not install until after the removal of those present and restart.

  For any need to use this method:

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN

  Instructions/TrendMicro removal tool
  http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  How can I uninstall my Trend Micro program removal tools fail?
  http://eSupport.trendmicro.com/pages/how-do-I-uninstall-my-trend-micro-home-and-Home-Office-program-if-the.aspx

  ========================================================

  Here's what I use and recommend: (all are free and offer exceptional protection)

  Avast and Prevx proved extremely reliable and compatible with everything I threw at them.
  Microsoft Security Essentials and Prevx have also proven very reliable and compatible.

  Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

  Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
  (Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
  http://www.avast.com/eng/avast_4_home.html

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
  a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• AppWorld select the lowest BONE or the current operating system?

  Hello

  I'm going to relase multiple filebundles to take in charge several OS (thanks to the ads BB 'simplified' requirement). My question is like this:

  I have created 4 filebundles for operating system specific (4.5, 4.6, 5.0, 6.0) and select all the devices for each filebundles. AppWorld detects the device OS and that it points to the related filebundles or it will automatically direct the device at the lowest that the device operating system supported?

  IE Bold9000 OS 5.0 - Download 4.5? or 5.0?

  Why I asked because, as Bold900, there are some with OS5 and others with OS4.6. If both my filebundles 4.6 and 5.0 have Bold9000 selected which one it will be downloaded? Based on the device on the operating system, or the lowest BONE, the device can support?

  App World will serve as the correct version based on the operating system device. For example "BOLD" with OS 5.0 will receive version 5.0, "BOLD" with OS4.6 will receive the 4.6 version.

• What is the best operating system

  Hello

  What is the best operating system, Windows 7 or Windows 8?

  Night1

  I have to say I'm a fan of Windows 8, not looked back since the upgrade of my laptop at home a few months back. The initial setting is quick and painless, the interface is really clean and simple to use, and there are also many other benefits.

  I found this article online, which talks about reasons why you should go:

  Why you should switch to Windows 8

  I would certainly invest!

  Damian.