Code 10 error on Windows XP

I get this failure when I plug my MP3 into the usb port.  The computer is a Compaq Pressario 5000 initially installed with Windows Me, who agreed the mp3 player. It wasn't until I upgraded to Windows XP that the failure has occurred. All the solutions I've met are to be upgraded to a high speed usb... but I do not understand that, if the computer system accepted me the MP3 software windows.

Any thoughts on this would be helpful...

Try to update the windows and installation of the software for the MP3 player.

Also install any updated firmware for the MP3 player.

Tags: HP Desktops

Similar Questions

  • driver chipset download code 80070490 error using Windows updates

    original title: try to download intelr 829456 chipset family code 80070490 error, microsoft has tried to adapt it still download of may not run solutions

    Hi, I keep getting a notice from windows update down load an update of the family of chipsets intel r 829456 Express.com when I do I get a code error 80070490, used good microsoft it solutions I get a message from windows update components must be repaired don't know what to do next , or if I need this update?, or is there a way to stop this request to make this update? Dave

    Hello

    Did you change your computer?

    I suggest you to see link and check.

    Windows Update error 80070490

    http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

    I also suggest you perform the clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • COD 4 Error 1719 windows service install could not be accessed

    So, after I installed Call of duty 4: Modern warfare, I get the error called: windows service install error 1719 could not be accessed

    It's quite annoying and I bought the game and it should work...
    They say that this problem is fixable, but I couldn't find it or search for it.
    Can someone help me even if it is a game, but I want to know if it my system or what?
    Please answer me.
    Thank you.

    Ahh forget it I figured out that the copy is dead: P so I installed a new and he's alive! xD

    Thanks for the info so. It happens to anyone, dead copies are horrible haha.
  • Error code 646 error on Windows Update

    Hi, I use Windows Vista, when it updates I get error code 646. Can you help me get rid of this, please?

    Hello

    read this

    Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

    http://support.Microsoft.com/kb/2258121

  • I have the code of error 0xc0000135 (Windows 7)

    I have the 0xc0000135 error code and I have tried everything that I could find on the internet for this problem. I am running windows 7 and you try to run an .exe application and it does not work. I asked the developer of the application and could not either. He only this message when I try to open the hauppauge capture and another application. Thank you in advance!

    He only this message when I try to open the hauppauge capture and another application. Thank you in advance!

    Sorry, this forum is focused on the problems of Windows. Better to check this with the Hauppauge people, or do an Internet search with a search engine.

  • CD and dvd drive code 39 error in Windows XP

    I write on behalf of a client when the client uninstall Norton 360 V5 system loses sight of my dvd players and cd.  The drive letter is no longer seen and I can't read or write on the part of readers. The operating system of the operating system is
    XP, but it also happened when running windows mobile phone of the customer home premium 7.  The customer was able to solve the problem using the troubleshooter in windows 7, but could not find a similar convenience store on XP.  Can you help me?

    Hello

     
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
    Run the fix it tool for the article mentioned below and check if this can help fix the problem.
     
    Your CD or DVD drive is missing or is not recognized by Windows or other programs
  • I get the same messages code and error with Windows Mail for a week that the person in the previous announcement.

    It seemed to have started running last week when we had a huge update of Windows.  Windows Mail does not connect to the top through our wireless network.  He tries to go through several dial-up non-existent.  It is not a problem with my server.  I checked with them.  I tried to pass even if Windows Mail, with tools, through accounts, properties.  Once I get in the window with about 8 tabs on it, I can't get into any tab, except that might do me some good.  When I click on the Connections tab, my computer hangs in Windows Mail, and I leave Windows Mail.  Is there another way to get into Windows Mail to set the connection to Windows Mail?  Is there a way to get my computer to get the network wireless set up as the connection by default because the way he is now, he won't put the connection wireless as the default connection, even if I'm signed up to this time.  It's a problem that has arisen recently and it is extremely annoying.

    Try to compact and repair the database first (see www.oehelp.com/WMUtil/) to rule out the possibility that it is a question of database.

    Then go to tools | Options | Connection and see if you can set the correct connection there.  Then go to tools | Accounts | Add | Post and add another copy of your e-mail account with the correct settings.  Before you download messages, go to tools | Accounts | Mail | The original properties and uncheck the include account when sending and receiving.  Then check mail on the new account you set up and see if it works.  If so, you can delete the old account.

    If it is still a question, then see point 3 here: www.oehelp.com/OETips.aspx#3 to exclude interference antivirus and see point 15 on this page for updates which could have done (nothing to do with your problem).

    Steve

  • Error Code 0 x 080070570 Windows updates and 0x800A01AE impossible?

    Error Code 0 x 080070570 Windows updates and 0x800A01AE impossible? Regds, 'a journey of a thousand miles begins with a first step."

    Code 0x800A01AE error and 0 x 080070570

    Stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:
    Click Start, run, type cmd, and then click OK.
    At the command prompt, type the following commands and press ENTER after each command:

    net stop wuauserv
    net stop bits
    output
    Rename the Catroot2 folder.

    Note do not follow this step if you are using Microsoft Windows 2000.

    To rename the Catroot2 folder, follow these steps:
    Click Start, run, type cmd, and then click OK.
    At the command prompt, type the following commands and press ENTER after each command:

    net stop cryptsvc
    Ren %systemroot%\System32\Catroot2 oldcatroot2
    net start cryptsvc
    output
    Important do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.
    Rename the folder "C:\Windows\SoftwareDistribution":
    Click Start, click Run, type %any, and then click OK.
    Right-click the C:\Windows\SoftwareDistribution folder, and then click Rename.
    Type SoftwareDistribution.old, and then press ENTER to rename this folder.

    Save the files used by Windows Update and Microsoft Update. To do this, follow these steps:
    Click Start, run, type cmd, and then click OK.
    At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
    regsvr32 c:\windows\system32\wuapi.dll
    regsvr32 wuaueng1.dll
    regsvr32 c:\windows\system32\wuaueng.dll
    regsvr32 c:\windows\system32\dllcache\wucltui.dll
    regsvr32 wups2.dll
    regsvr32 c:\windows\system32\wups.dll
    regsvr32 wuweb.dll

    Start the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:
    Click Start, run, type cmd, and then click OK.
    At the command prompt, type the following commands and press ENTER after each command:
    net start bits
    net start wuauserv
    net start Eventlog
    output

    Luck!

    Kind regards
    Sohail Patel

    Regds, 'a journey of a thousand miles begins with a first step."

  • Code 80072EE2 error when I try to update the update for Windows Vista (KB972145) tried to install on a week help someone?

    Code 80072EE2 error when I try to update the update for Windows Vista (KB972145) tried to install on a week help someone?

    sweetcheeks,

    0x80072EE2 ERROR_INTERNET_TIMEOUT http://support.microsoft.com/kb/836941/en-us

  • installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online

    NEW HP computer bought in September, already updated to Windows 7 with HP upgrade kit. I installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online. Also can not get a pop window to activate by phone. HP says that I must fully restore Windows Vista x 64 Home Premium AGAIN at the factory all MICROSOFT updates, and THEN... so I can reinstall Windows 7 upgrade. Why now only after 30 days Windows 7 refuses to ACTIVATE! Nothing but run between Microsoft and HP > Please HELP without having to reinstall EVERYTHING on my computer.

    Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

    If you were not able to validate, follow these steps:

    1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

    -Online Windows XP: double-click the executable file to run the tool.

    -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

    2. after running the tool, click the Windows tab and then click on copy to the Clipboard.

    NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

    3 start a new post in the appropriate Microsoft Genine Advantage forum and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

    4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Error code 0 x 80070643 Windows Update

    When you run Windows Update, I get "some updates could not be installed" for "Microsoft .NET Framework 1.1 Service Pack 1 security update for...» (KB953297) "the log says file error code 0 x 80070643 so I followed the instructions here http://support.microsoft.com/kb/958052 and enabled the additional logging options.  It has certainly created several journal entries when I tried to reinstall, but I don't understand them.  Article says to contact MS support, but they know long waits for XP questions or they want me $210.00 load.  Pass.

    Do I have other options to install this update?

    The Windows version is 5.1 SP3

    First of all turned off, to
    MS09-061: Description of the update of security for Microsoft .NET Framework 1.1 Service Pack 1:13 October 2009

    How to get help and support for this security update

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    Unless you are a corporate customer , it is completely wrong for that to be said that support for the installation of this update you would cost you $210.
    If you are not a business customer you can contact him again the Support and show them the above information or see this article:

    When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0, or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install '1603' MowGreen MVP Data Center Management - update of safety Consumer Services

  • In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

    In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

    0X8007000D ERROR_INVALID_DATA

    Try to manually download the update and installation
    http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

    It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

  • Error codes when you use windows update 0 x 643

    Error codes when you use windows update

    Received error code 0 x 643 during the installation of update for Visual C ++ 2010 (KB2467173). What should I do?

    Hey Joe,

    You can check if this article helps.

    You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update

  • code 3 error Windows xp media center

    My Media Center application isn't working - I have a few different errors, but the most important seems to be 3 Code and failure of critical processes.  I did the steps in KB 910905 several times, but it has not solved the problem.  I also get a Messenger failure whenever I start Media Center, although Messenger is installed and working properly.  I don't know where to go from here - there has another possible solution to this?  I have Windows XP with SP3.

    Use all of the following steps in the order indicated below for manually services Media Center cancels the record and save again:

    1. Close Media Center
    2. Click on the start menu, choose run and type cmd
    3. Run the command regsvr32.exe atl.dll
    4. Run the command C:\WINDOWS\eHome\ehSched /unregServer
    5. Run the command/service C:\WINDOWS\eHome\ehSched
    6. Run the command C:\WINDOWS\eHome\ehRecvr /unregServer
    7. Run the command/service C:\WINDOWS\eHome\ehRecvr
    8. Run the command C:\WINDOWS\eHome\ehRec.exe /unregServer
    9. Run the command C:\WINDOWS\eHome\ehRec.exe/regserver
    10. Run the command C:\WINDOWS\eHome\ehmsas.exe /unregServer
    11. Run the command C:\WINDOWS\eHome\ehmsas.exe/regserver
    12. Restart the Media Center

    For messenger error: -.

    http://mymce.WordPress.com/2008/08/20/Windows-Messenger-error-in-Windows-Media-Center/

  • code 80090006 error, problem is preventing windows to check exactly the license for this computer. Then you disconnects to the user menu.

    Have window xp error. A problem is preventing windows to check exactly the license for this computer. error code 0 x 80090006. Then it disconnects you return to the screen of the user menu.

    Error code 0 x 80090006

    This problem occurs because the drive letter has changed or that some files can be found in default locations.

    See: http://support.microsoft.com/kb/914232

    You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer

    When you try to start a Microsoft Windows XP-based computer, you may receive an error message that contains different error codes. This article describes the causes of the different error codes. This article also provides workarounds for the following error codes:

    • Error code 0x80004005
    • Error code 0 x 80090006
    • 0x8009001d error code
    • Error code 0 x 80070002
    • Error 0x8007007f code or code error 0x8007007e
    • 0x800705aa error code 0x8007007e error code and error code 0x80004005
    • 0x800705aa, error code 0 error code 80070002 x, error code 0x80004005, 0x800405aa error code and error code 0 x 80090019
    • 0x800703e7 error code

    Additionally, this article contains workarounds for some error codes that aren't in this list.

    etc.

    TaurArian [MVP] 2005-2011 - Update Services

Maybe you are looking for

  • -Does anyone know how to detect a bad/corrupt file?

    Basically my laptop crashes, after some looking at but I think it might be to do with a file I have (for the moment I have only really photos, videos and music files). Is there some way I can find out if one of them is causing my laptop freeze?Thank

  • Need driver card its W2k for Satellite A65-S1062

    Hello world! I have an A65-S1062 who move on Win XP operating system. For some reason, I install Win2000 instead of WinXP.After the installation of Windows 2000, I have loss my graphic driver sound card, but I found the graphics driver.Now, I don't h

  • Satellite P300 - Value Added package does not work after the computer restarts

    Hello I have a Toshiba Satellite P300 PSPCCA Windows vista ultimate x 64. I can't do my work button soft touch. I downloaded latetest VAT package and installed. After installation it asks to restart but I restart my laptop and I make just restart Fla

  • Example of test bench for several elements of e/s FPGA

    Hello I'm looking for an example on the creation of a test bench that simulates multiple FPGA of e/s digital lines. I went through the tutorial of creation of test benches, but it uses only a single element of I/O.  E/s reading Point Name.vi is obvio

  • Add to Dictionary

    When I right click to select a misspelled word, the option "add to Dictionary" is grayed out and therefore unusable.I am able to "ignore" or "ignore all", but does not add it to the dictionary so that I can continue to use the new Word.I use a lot of