code 8007054f re KB9710323 my computer starts repeatedly try to install this update

Similar Questions

• Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• A security update cumulative for Internet Explorer 8 for Windows Vista (KB974455) __When I try to install this update fails I get error Code 80073712__

  I use Avg as a firewall and internet security 9.0.709

  KB974455 was released several weeks ago. How is it that you just try to install it now?

  A number of updates have been released since exit KB974455: were you able to install all the?

  80073712 ERROR_SXS_COMPONENT_STORE_CORRUPT
  CSI does not support several concurrent writes by design
   
  Have you rebooted and tried again?

  What antivirus application was installed before you installed AVG Free 9.0 and was your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you installed IE8?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get an error 8024800A code when you try to install this update how can I fix this (definition 1.151.666.0) KB2310138

  I can't download this update, how to fix

  Hi Kelly,

  Method 1: Install the latest Microsoft Security Essentials definition updates.

  https://www.Microsoft.com/security/portal/definitions/howtomse.aspx

  Method 2: Perform the steps from the link below and see if it works.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/( )

  Warning of Chkdsk.
  
  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Good day!

  Answer please if you face concerns.

• When you try to install an update Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based systems (KB968930) I get error Code 0x8007371B

  I get error Code 8007371 B. I tried several times to install and it still fails? What can I do to have it installed.

  Hi CSAMaximus,

  (1) how long have you been faced with this problem?

  (2) what is the complete error message you receive?

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Download and install the tool of the system was last updated

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

  
  Method 3: the clean boot computer and then try to install the updates.

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• I try to install the update update of security for SQL 2005 service pake 3. I have vista 2 this update applies to my computer I get an error code ff or c0000005

  I try to install the update update of security for SQL 2005 service pake 3.  I have vista 2 this update applies to my computer I get an error code ff or c0000005

  1. navigate to the following registry key (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL.1\Setup)

  2. find the "Summary" (REG_DWORD), and then change its decimal value from 1 to 0

  3. restart the computer

  4. install the same update.  It should work.

• 80073701 error code when you try to install KB2378111 update on Windows Vista

  When you try to install the update KB237811 on Vista 32-bit, I said it has installed successfully, but I have to restart my computer.  After the reboot, I get a message that the installation has NOT been successful.  I tried to install this update three times, and I still get the same error code: 80073701.

  See the section "How to get help" of http://support.microsoft.com/kb/2378111

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a free Windows Update support incident email request:

  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

• 57F error code I have Vista and I am running MS Office 2002 for students. When I try to install the updates, I get this error code. Until a few months ago I had no problem with the installation of updates for MS Office 2002

  Ideas:

  • Programs that you have problems with MS OFFICE 2002
  • 57 E error messages
  • Recent changes made to your computer NO
  • What you have already tried to fix the problem error code search

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi halecky6,

  Welcome to the Microsoft answers site!

  (a) update you are trying to install? (It would be better, if you can provide the number of KB)

  (b) are the other updates related to Windows from installing on your computer?

  I suggest you try the following steps:

  Step 1: Disable the software security and then try to install the update

  Note: Activate security software once the test is completed.

  Step 2: Download and install the update in the clean boot state

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  After starting the computer, download the update manually and try to install it.

  http://www.Microsoft.com/downloads/en/default.aspx

   

  Note: Return the computer to normal - reset the computer to start as usual (follow step 7 in the link) once everything is done.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  You can also post your question on the office community, please visit the link below:

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My XP computer keeps trying to download and install this update KB2686509. It is a zero-byte file.

  My XP computer keeps trying to download and install this update.  It is a zero-byte file.

  Any help would be appreciated.

  Jack

  Original title: Windows XP (KB2686509)

  A lot of discussions about this particular update:

  http://answers.Microsoft.com/en-us/search/search?searchterm=KB2686509&CurrentScope.ForumName=Windows&CurrentScope.filter=windows_update&askingquestion=false

  more particularly:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115C-419D-AC37-03ff8927b79c

• A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

  A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

  Hello

   
  You are able to install other updates successfully?
   
  See the methods mentioned below and check if that helps.
   
  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/310353

  Note: After completing the troubleshooting steps in the clean boot, follow steps to configure Windows to a Normal startup State of the link section to return the computer to a Normal startup mode.

  Method 3: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058
  Method 4:
   
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
  Hope this information helps.

• Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  I've read other discussions on error code 80242FFF.  Based on suggestions from Microsoft technical support, I tried Mncrosoft Fixit.  Also, I started my computer in mode safetboot and tried to update.

  They did not work.  So, will you be able to help me find a solution?

  Thank you

  Ken

  Hello

  1. is that the copy of windows is enabled?

  2 is the issue limited to the installation of a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)?

  I suggest to perform the steps in the following article and check.

  Method 1: run the Windows update troubleshooting tool and check.

  The problem with Microsoft Windows Update is not working http://support.Microsoft.com/mats/windows_update/

  Method 2: I suggest you to put the computer in a clean boot state and check if Windows update installs successfully.

  To help resolve the error and other messages, you can start Windows vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows vista and windows 7:
  http://support.Microsoft.com/kb/929135

  
  Note: When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.

  Method 3: If the problem persists, follow the steps in the following article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

   

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

  How to back up and restore the registry in Windows

  b) while running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  For reference:

  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

• When I try to install the updates to windows, I get the 8007371C error code

  I can't find any information on this error code. What is the error & the solution to the error? Help, please.

  Hi nymom,

  1. When was the last time you were able to install the updates on the computer?

  2. did you of recent changes on the computer?

  3 update you are trying to install?

  4. do you have security software installed on the computer?

  Method 1

  I suggest that reset you the Windows Update components by default and then try to install the update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2

  View update history to know what update is not to proceed with the installation and post back with the details.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.

  http://www.Microsoft.com/downloads/en/default.aspx

• Try to install the update for win 7 error code windows service install could not be accessed

  I can't indtall a program

  Try to install the update for win 7 error code windows service install could not be accessed.  Insatller Windows is not installed correctly.

  Try to make sure that the Windows Installer service is running, or force start it.

  1 open run and type services.msc, and then press ENTER. You can also go
  to the Panel of control-> Administrator Tools-> Services.

  2. in the installation list services, locate Windows Installer.

  3. check that the status is started. If the condition column is empty,
  Right-click Windows Installer, and then select start.

  4. If you get the error trying to force starts the Windows Installer service,
  try to change the Startup Type to automatic (default is Manual), then
  Restart the computer.

  You can also give the following a try, make sure that you back up your Windows registry database before you try:

  7 How do I backup the registry in Windows

  http://blog.thinksharp.nl/2009/03/08/WindowsInstallerHELLOnVistaX64PlatformsAlsoFixesITunesInstallProblem.aspx Change of the

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer\WOW64 key from 1 to 0 got my install iTunes work.

• 00643 error code when you try to install important update __WHy?

  Several times the same error code - tried this only started recently - what am I doing wrong? Can someone help me please

  Operating system? Update in question?

  1 Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  2. Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  3. you receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates
  http://support.Microsoft.com/kb/958052

  4. you receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services
  http://support.Microsoft.com/kb/903772

  and finally -.

  5. When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  and/or

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I try to install the update for Microsoft Works 8 (KB977304) security, but he has been unable to download. He said it failed because error code 646

  I try to install the update for Microsoft Works 8 (KB977304) security, but he has been unable to download. He said it failed because error code 646. If anyone can help me with this that would be great.

  Hello

  Do you work on your computer? Otherwise the control panel - Windows Updates - right
  Click on and HIDE.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.