Code 80071a3f when you try to install one offers updates

Similar Questions

• error code 8000FFFF when you try to install updates from windows update.

  error code 8000FFFF when you try to install updates from windows update.

  Lonnie,

  8000FFFF error code when you click on "check for updates" in the item of control panel of windows on a windows update computer vista http://support.microsoft.com/kb/946414

• Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  I've read other discussions on error code 80242FFF.  Based on suggestions from Microsoft technical support, I tried Mncrosoft Fixit.  Also, I started my computer in mode safetboot and tried to update.

  They did not work.  So, will you be able to help me find a solution?

  Thank you

  Ken

  Hello

  1. is that the copy of windows is enabled?

  2 is the issue limited to the installation of a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)?

  I suggest to perform the steps in the following article and check.

  Method 1: run the Windows update troubleshooting tool and check.

  The problem with Microsoft Windows Update is not working http://support.Microsoft.com/mats/windows_update/

  Method 2: I suggest you to put the computer in a clean boot state and check if Windows update installs successfully.

  To help resolve the error and other messages, you can start Windows vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows vista and windows 7:
  http://support.Microsoft.com/kb/929135

  
  Note: When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.

  Method 3: If the problem persists, follow the steps in the following article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

   

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

  How to back up and restore the registry in Windows

  b) while running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  For reference:

  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

• Getting error code 80004005 When you try to install an update to windows 7

  When you try to install an update to windows 7, I get a failure during Windows Setup. The error code is 80004005.

  80004005 = unknown error 0 x - can occur due to programs/services to interfere in the background.

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• How to fix error 646 windows code 7 when you try to install updates?

  error code 646 on windows 7 when you try to install the updates

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/043e5807-575d-45e7-9320-1dc415b5ee20

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/7fbfee2a-70d9-4007-A565-ee1b6d8f018d

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Received error code: U44M1I216 when you try to install the updates

  When you try to install the updates for my adobe products, I received the following message is displayed:

  Photoshop Camera Raw 7.4

  There was an error of installation of this update. Quit and try again later. Error code: U44M1I216

  
  

  Update 6.0.5 extensions Manager

  There was an error of installation of this update. Quit and try again later. Error code: U44M1I216

  
  

  Adobe Photoshop 13.0.5

  There was an error of installation of this update. Quit and try again later. Error code: U44M1I216

  Appreciate any help and suggestions.  Thank you.
  

  Hi Jeff,

  I had a whole series of mistakes differrent, but thought of the discuussions in http://forums.adobe.com/message/5273970#5273970 would be the resolution, but as you can see by my comment on this subject, that this still has not first solve my problem. I finally solved it by using this solutions all in contact with technical assistance, although I do not understand what we did different, he still was't straight forward and had several attempts to succeed. Still seems to be a problem Adobe must answer, especially with the new CC version and update to come Monday, I bet that there will be a lot of discussion of this problem the week next in the forums.

  See you soon

• Error when you try to install the software update of tax

  It is for the HR Block Tax software,

  Update installs successfully on the XP machine, but on windows 7, I get this

  "Windows Installer does not allow patching of managed advertised products. At least one characteristic of the product must be installed before applying the patch.

  I made sure that it is running as an administrator. Tried to use the previous version of windows. Still lost.

  Google and seems that it may occur with other programs as well. Have not found a solution very clear.

  Hello Joslinm,

  1. do you get this error when you try to install any other application?

  I suggest that you contact the H & R support and check if the application is compatible with Windows 7. Here is a link you can follow to contact support:

  http://www.hrblock.com/support/index.html

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• error code 66A when you try to install update MS10-077

  I can't install this update... tried several times.

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

• I get error 800b0100 when you try to install the KB961371__ update

  I have trouble to install udate KB961371.

  Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  See...

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702

  See also the section "How to get help" of http://support.microsoft.com/kb/961371

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Consumer Security Support homepage
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Code: 80070490 when you try to install windows updates

  I had this problem since March 2010. I get this error for most, but not all, updates to Windows update code (Vista Home basic Service Pack 2, 32-bit operating system).

  All updates cause me this problem are labeled 'security and important updates. From time to time a security update installs OK and any malware removal tools and updates for windows. One thing is certain that ALL who fail are security updates.

  I've tried almost all of the suggestions I found in responses from Microsoft that I could find, and I still have the problem.

  I really hate to continue to use my computer on my home network not knowing that I have all the updated wins.

  Need help

  Hi billch42,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. What are the suggestions that you have tried to solve the problem?

  This problem may occur if there is corruption in component maintenance (EC) manifest.

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Windows Update error 80070490

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070490

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to install an automatic update, I get an error Code 52D. What should I do?

  Error messages

  Hello

  Welcome to Microsoft Windows 7 Forum!

  You can try the following steps and check whether the problem is resolved.

  This problem may occur if some of the windows update components are corrupt, so we will try to reset the windows update components and find the number.

  You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058

  Once the Windows Update components are reset, try to reinstall updates. To do so,

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.

  2. click on the settings option to change on the left navigation bar. You will now be on a screen where you will be able to set up how Windows Vista download and install updates on your computer.

  3. Select the option check for updates but let me choose whether to download and install them. When you have finished setting options that you want, press the OK button to save these settings. You will now be at the main screen of Windows Update.

  4. in the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer.

  5. you can then download the updates one or both.

  6. click on install updates to install updates currently selected.

  7. Repeat steps 5 and 6 until you get all the updates you want on your PC.

  For more information about installing the windows updates, see

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Error code 800F0811 when you try to install service pack 2 for vista

  Original title: error code 800F0811 when trying to install service pack 2 for vista tried booting in minimum mode and reset my compents windows update or where he worked?

  When try to install service pack 2 for vista tried clean boot and reset my windows update components or where he worked? This two things were proposed during this same error that happened to a customer trying to download sp1

  Hello

  Review the information in the site mentioned below that can help you work with the question:

  http://support.microsoft.com/kb/947366#resolution3.

• Error code 800F0816 when you try to install KB2507938 and following

  When you install KB2507938 and others today on my Vista SP2 32-bit on Acer Aspire 7735 I couldn't start the laptop over. I needed to return to the configuration of the system later by the Windows tools. In the update log, I see the error code 800F0816 for the following updates:

  KB2507938

  KB2533623

  KB905866

  KB2555917

  KB2532531

  Any ideas why it's a failure? Should I try to stop the Windows Firewall, and then install and start the firewall up later? Any help appreciated.

  Hi Nora Marx,.

  Method 1

  This can also happen if there is some system files corrupted on your computer. I suggest that you run a SFC scan, which would be a system file corrupt on the computer search and replace.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2
  Step 1: once you make SFC scan, then I suggest to clean starts and then download and install the updates.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  Step 2: Update security for Windows Vista (KB2507938)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26733

  Update for Windows Vista (KB2533623)
  http://www.Microsoft.com/download/en/details.aspx?ID=26757

  Update for Windows Mail Junk e-mail filter [July 2011] (KB905866)
  http://www.Microsoft.com/download/en/details.aspx?ID=1207

  Update security for Windows Vista (KB2555917)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26752

  Update security for Windows Vista (KB2532531)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26749

  Method 3
  If the steps above fail, I suggest you to re - enable and disable the Windows Firewall.

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

• Error Code WindowsUpdate_00000D56 when you try to install Microsoft SQL Server 2005 Express Edition Service Pack 3 (KB955706) on Vista Home premium.

  Hello

  Help, please! I automatically get the update above via Windows update, but every time I try to install it, it fails with the WindowsUpdate_00000D56 error code. I searched on through pages and pages or forums, but I do not understand the jargon. How can I get this update to install successfully?

  Daniel

  Hi Daniel,.

  Could you please provide the full error message that you receive for a better understanding of the issue?

  Step 1: Manually download the update from the link below and then try to install it

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ae7387c3-348C-4faa-8AE5-949fdfbe59c4&displaylang=en

  Save the update on the Office

  Step 2: Disable security software, follow the steps mentioned below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done

  Now try to install the update that is saved on the desktop

  Let me know if it works or you need help

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 800F0816 when you try to install the updates

  Vista Home Premium Service Pack 2, 64-bit operating system. Downloaded and installed the latest updates of security, but 6 of them have failed to install which gives error code 800F0816. (specifically KB978338, 980232, 979683, 981332, 905866 and 978601). Unable to find much information about this error code at all. Can someone point me in the right direction please? Thank you JOCK McSQUIGGLE

  Thanks for the pointers, but none of the Web pages on the links provided, mentions this error code, which I find strange it seems that the problem is caused by the presence of defined Windows Firewall on 'on' when you download updates.  Turning the firewall Windows on a 'stop' in the control panel allows downloads to install correctly. Hope that other users may find this useful. JOCK McSQUIGGLE