CODE error 39 try installation, gel, try the registration program, said driver update driver update, nothing works, still cannot install the device driver
I try, nothing works. I try the system restore, try supportmicrosoft.com and they fix it, but when I open the Device Manager, my cd/dvd drive are still '? When I install the new window to solve the problem, window would not install the new program because it says I have no device driver for the cd/dvd drive.
Help.
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
Hope these helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
Can someone help me please?
On one of our macbook pro: end of 2011 in stock... hard drive, memory stock, after the 10.11.5 update nothing works anymore:
-Start: sometimes goes to 70%, 80% of the progress then a few lines appear and the screen goes black for a second and then turns to white to stay like that forever.
-recovery of the internet: charge of recovery, then starts and goes back to the white screen.
-time machine backup works do not at all
-Resettlement of USB-stick: boot from USB key gives the same result as the normal start-up (see above)
-everything: fashion, single user: same thing
(Internet) Apple hardware test allowed the machine.
Thing I could try?
Target works of fashion, I copied most of the files on the external drive.
If nothing else works, can I do a clean install to this macbookpro (in target mode) of mine?
Thank you very much.
can I do a clean install to this macbookpro (in target mode) of mine?
Yes. Open utility disk on your computer. Run disk utility, select the drive from the computer problem and select first aid. Reformat the hard disk using Disk Utility/Erase Mac OS extended (journaled), then click on the Option button and select GUID. Download the installer from the App Store using the identifier Apple associated with the computer that you are trying to recover. Then re-install the operating system on the computer of the problem.
-
Original title: 'Bad image 32 system error'
Error window opens "Winword.EXE - bad image", "C:\Windows\system32\bitsprx532.dll is not designed to run on Windows or it contains an error. Try fashion program at new etc. etc."
This happens at startup when programs open ie. audio and whenever I try to open a program, in this case MS Word. I click the OK button several times and he goes and allows me to work in the program.
It seems that the C:\Windows\system32\bitsprx532.dll file is related to malware. Examine for example the Uploader on VirusTotal.com and checking the results provided here.
Scan your system with the free version of MalwareBytes AntiMalwareand see what it finds.
Check with Sysinternals Autoruns for entry autostart referencing bitsprx532.dll and validate its location (in the autostart list).
-
tried the Device Manager and add/install the old hardware on the wizard... he finds ADSInstant HTV PC1, but sending the message... Impossible to install correctly the code 10
Restore the system to then it was working properly.
-
Cannot open not Ultimate traffic, get code error 339. Impossible to uninstall the game
Original title:-Thei have traffc ultimate instald on my computer and when I go to open the program t gives me an error code 339 and trying to uninstall cant
the programe of flight sim is 2004 and the program works fine. Its the ultimate traffc giving code error 339
Hello
(1) operating system do you use?
(2) since when are you facing this problem?
(3) don't you make changes to the system?
(4) was this works much earlier?
The problem is caused by programs such as firewalls, anti-virus and Anti-Spyware software programs running at the time of installation. Please, close them and try to reinstall.Method 1: Perform a clean boot
Follow the steps in the link below to perform the clean boot.
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.
Check if the problem persists.
Method 2: Disable the security software / firewall
Temporarily disable all firewall and security software and check if the problem is fixed.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Enable them after you perform the troubleshooting steps.
It will be useful.
-
Hello
is anyone know this error Code:-65589?
This error says:
Shared in environmental_logger.vi variable
This error or warning occurred when writing the following shared Variable:
CompactRIO Target\Mod2\DO1 \\RT
\\localhost\Mod2\DO1My cRIO9073 has 3 modules:
MOD1: 9203 HAVE,
MOD2: 9472 DO,
Mod3: 9265 AO.
When I delete all States and run only the first "init" State where I put DO0 = true and DO1 = false, I get this error. What could be?
I think we need more information about your project - you can take a screenshot of your project LabVIEW RT target and the location of the shared variables? What is the configuration of the shared variable? Do you use the cRIO Scan Engine or FPGA (or both?)? How you deploy your library of variables? You should also zip to the top of your project and join, if you can.
Here are some articles about the possible causes:
http://digital.NI.com/public.nsf/allkb/C32368835ADAEE19862578500067A8C4
http://digital.NI.com/public.nsf/allkb/7B52091D2FFA01EC86257C32005DF935
-
I receive thousands of billions of these error messages in the event viewer. My CD player broke and he was writer b replaced a regular CD; It can also play DVDs that fine for now. I think that the error may be because the system recognizes the change. However, when I check in the Device Manager it says that the device (the CDRom works. ??!! Need help!
Hello
In most cases, this error is displayed if the CD, DVD or Blu Ray, who is currently in your drive has a bad sector block.
Method 1: Insert the new CD drive, remove the drive defective media from your drive.
Method 2: You can also try following the steps from the link.
http://support.Microsoft.com/kb/314060
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/
For all windows questions do not hesitate to contact us and we will be happy to help you.
-
Cannot install current device driver for the video card.
I get a "blue screen" or "stop error" message after my computer shuts down unexpectedly. He told me to attack the video device driver. I tried to go to the windows updates. Don't choose Custom/Hardware options. By saying that they must be done separately. Also can download the pack family thingy, but won't install it. Not sure if the 2 issues are related.
Hi ginam4462,
1. What is the exact stop error or message code?
2. don't you make changes before the show?
3 you get an error message when trying to install the video card driver?Please provide us with more details on the issue, so that we can better help you.
During this time, check if the following items are useful:
1 see Error Message: cannot install hardware. An error occurred during the Installation of the device
2 see How to solve problems of hardware and software Windows XP driversVisit our Microsoft answers feedback Forum and let us know what you think.
-
error 0 x 80070005 trying to update Win7x64Ultimate to 10 (cannot install)
All important & required updates have been installed. Disabled antivirus. Connected to the admin account. You run Fixit, AccessChk (but the accesschk.txt file is empty), there is no ' HKLM\Components 'pendingrequired = 1' REG_DWORD, have run reset.bat (but it says 'subinacl' is not recognized as int or ext cmd), said windows update troubleshooting tool:
Details of the update of Windows editor
Problems found
Registration for the service is missing or corruptService record is missing or damaged fixed fixed
Sign up for the service Reset Completed
Windows Update, error 0 x 80070005 (2016-05-02-T-03_05_19P) 0 x fixed fixed Windows Update error 80070005(2016-05-02-T-03_05_19P)
Reset Windows Update Completed in the data store
Problems installing recent updatesProblems recent installation updates fixed fixed
Fix Windows Update finished
Problems installing recent updatesProblems recent installation updates fixed fixed
Fix Windows Update finished
Potential problems that have been verified
Windows Update environment variables are variable incorrectWindows to update environment there is no such thing as incorrect question
Some security settings are missing or have been changedSome security settings are missing or have changed there is no question
Check missing verrouillesfichiers or damaged, missing or corrupt files in question does not exist
Windows Update services aren't runningWindows update services perform no matter does not exist
Encryption services components are not the registeredCryptographic service components are not registered there is no question
Problems found details
6 registration for the Service is missing or damaged fixed fixed
Sign up for the service Reset Completed
6 0 x fixed fixed Windows Update error 80070005(2016-05-02-T-03_05_19P)
Reset Windows Update Completed in the data store
InformationalDataStoreAndWULogFiles.zip
31.24 MB
File name: DataStoreAndWULogFiles.zip
6 problems to install these updates fixed fixed
Fix Windows Update finished
Fix Windows Update services and dependencies
6 problems to install these updates fixed fixed
Fix Windows Update finished
Fix Windows Update services and dependencies
Potential problems that have been verified detection details
Windows Update environment variables are incorrect question does not exist
Some security settings are missing or have changed there is no question
Search for the missing or to issue corrupted files does not exist
The Windows Update services running not issue does not exist
Encryption services components are not registered there is no questionExpand detection details
Report InformationalError
RootCause: RC_DataStore
Error code: 0x80070005
TimeDetected: 2016-05-02-T-03: 05:19 P
File InformationalCollected
File name: CheckSURLog.cab
Collection information
Computer name: BACKUP-PC
Windows Version: 6.1
Architecture: amd64
Time: Monday, may 2, 2016 15:05:03
Publisher Expand details
Background Intelligent Transfer Service
Find and fix problems that may be preventing substantive work downloads
Package Version: 1.2.1.20140627
Publisher: Microsoft Corporation
Windows Update
Find and fix problems with Windows Update
Package Version: 8.1.1.20140627
Publisher: Microsoft Corporation
Windows Update
Find and fix problems with Windows Update
Package Version: 8.1.1.20140627
Publisher: Microsoft CorporationProblem has been resolved.
By my second post above, fortunately I was able to do upgrade to 10 Windows so I no longer need help.
Thank you for your offer to help.
-
The site is www.Jardencs.com/careers. When I click on "Career opportunities", I get the following error message:
Query error
Prohibited directory
Registration denied
Close the browser and try to connect again.
Error code: 403.14.The link worked on my computer up until now and now working on my cell phone. I recently installed the torch, but uninstalled it today when I started having this problem.
When I click on the link, I get sailed on a different site, https://erecruit.jarden.com/erecruit/jarden.html. This is done via a script rather than a simple link.
-
Help! How can I get those blasted things to install?
Hello
Follow the step and check if that helps.
Method 1: you receive error 0 x 80070643, error code 0 x 643 or updates may be offered again when you try to install .NET Framework updates when you use Windows Update or Microsoft Updates
http://support.Microsoft.com/kb/976982
Method 2:When, that you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive a Windows Update '0 x 643' error code or error code Windows install "1603".
http://support.Microsoft.com/kb/923100
Method 3: you receive error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update
http://support.Microsoft.com/kb/2258121
Method 4:Try download and install the update
-
Activation problem
I reinstalled Vista (upgrade), when I try to check and enter my product key, it says "only for the upgrade not a clean install. On the activation screen, it shows all telephone support option. Thanks for any help!
This is because a product upgrade key requires a copy of Windows to upgrade. That's why its called an 'upgrade '.
Restore the copy of Windows you improved the first time and then move on to Vista.
-
error message 00000646. tried repair, cleaning of files and did the sfc/scannow
Have you seen this sticky yet? -Online http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I just got this from Adobe support. Close all windows and start with a new browser window. Go to < www.prodesigntools.com >. On the right side of the window, there will be a small box labeled «direct download links» Click on 'New CC 2015' and when it starts to download cancel the download. Then, right-click on the "Lightroom 6/CC" link and open in a new tab scroll down until you find "BOLD" topic "Adobe Lightroom 6/CC direct download links" and then click on the link for the version you want to download, Windows or Mac OS. It's a slow download, maybe 2 hours or more depending on your speed of connection and internet download. When the download is complete, you will need to extract the files and install the program.
It is 22:00 Tuesday evening, and I am downloading right now in the Middle, waiting for results. I would like to hear the techie I spoke with tonight some time tomorrow and I will let him know if it worked.
Seems to me that this should be the method of downloading the program from the beginning, instead of all jump them through hoops and making many phone calls after he did get any help or advice on the site. I've been playing with this for three days and finally have little hope to get the program on my computer. Good luck, I hope this help anyone.
I don't have a screenshot of the error message, cannot find version
Lightroom, I installed now, and my question was not
answer online. I was given instructions by phone and made the
operation after the end of the telephone conversation. I also do not have
enjoy the repetitive requests for confirmation of my post. Kindly
stop asking for more information, I have given you
sufficient data and given an adequate explanation. Thank you.
The game, 09:46, 4 August 2016, Jeff A Wright [email protected]>
-
Samsung net book built in cam. Cam sex never work, but I only got sound. nc110
Hello
1 when was the last time it was working fine?
2. did you last changes before the show?
3. have you contacted the manufacturer about webcam problem?
Method 1:
Updated a hardware driver that is not working properly:
Also install the latest drivers for the webcam from the manufacturer's Web site.
Method 2:
Troubleshooting Windows:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-in-Windows
Method 3:
Hardware devices do not work or are not detected in Windows:http://support.Microsoft.com/mats/hardware_device_problems/en-us
For more information, please contact:
I hope this helps.
Maybe you are looking for
-
Path missing iTunes Songs (already tried script)
Hello recently I moved all of my itunes library to my new computer (Mac-> Windows), I noticed that some songs bad location path, and I discovered that the songs with special characters (like aeioun, Yes, I'm Spanish) are those who have suffered from
-
iTunes recognizes an iOS device, but not others
I have an Air iPad on iOS 9.2.1 & one iPhone on iOS even 5s. When I start my Mac with iTunes SL sees the iPad, the iPhone gets the message to update iTunes but this is the last version for SL. Ideas anyone please?
-
S890 - ideatool connection problem
Bought a S890 a few days ago. Have tried to get hook upward with my PC, but nothing helps. First of all, it does not connect as USB storage because of driver problem, as the "engines" are in the phone itself. So, I managed to copy the drivers and the
-
GameCenter does not work on iOS 9.2
Hey community,. Today, I downloaded an application needs (I think) gamecenter to start. (Btw: it's Angry Birds 2) The application has stopped loading to "connecting...". » I checked the app on the home screen: freeze checked the app settings: freeze
-
HP Envy 5534: Need help to find the 32-bit drivers - Win7 - basis for HP Envy 5534
Please see above, I'm unable to locate the drivers necessary 32 bit for my HP Envy 5534. I need to use the base without the supplied software drivers and I have a 32-bit system. A permit would be appreciated Thank you.