Code sample NFC in the development guide does not

Similar Questions

• the channel guide does not match the actual string

  the channel guide does not match the actual string that is to say PBS should be Channel 13 but is listed as channel 2 on the guide

  Hello James,.

  Welcome to the community of Sony.

  What is the model # of the TV?

  You can locate the model # of the TV from this link.

  You can try the steps mentioned on the underside of the base article of knowledge:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C408137

  Please mark it as "acceptable Solution" If you find this information useful.

  Kind regards

  Colby

• Panels in the develop module does not open

  All of the panels in the develop Module are visible and have a check beside them when I right-click.  However, the panels not open or close when I click on them.

  I can't seem to open the base Panel, and I can't get the detail panel to close?

  Thanks for your suggestions.  I searched for an answer in the FOrum, but did not.

  I've never seen a check mark next to a Panel, you can show us a screenshot? I saw a triangle on the right edge of the Panel name, what do you mean? (And I can confirm that it is Lightroom you speak?) If so, what version NUMBER?)

  What happens if you press CTRL + 1, the base Panel seems so?

• I installed LR6 however the develop Module does not work.

  All aspects of LR6 work, however, when I try to open an image in the develop Module all I get is a blue screen with diagonal lines through it?

  adobe staff:

  It is a nuisance GPU. Update your GPU drivers from the manufacturers Web site.

  In the meantime, disabling "Use Graphics Processor" (Preferences > Performance), should help to load the module development.

  For more details, Adobe Photoshop Lightroom Help | Lightroom GPU FAQ

• The extension "Guide" does not contain a valid signature. The extension will not be installed.

  Hi guys, looking for some help because I can't install an extension for Photoshop. Managed to install it on a machine in the office and it works very well.

  Data sheet:

  iMac OSX 10.8.4

  Photoshop CC

  The CC extensions Manager

  Please let me know if you need anything that anyone else.

  I've GuideGuide 2.1.3 successfully installed in the same environment as your. I guess you used the same version of guide. Have you updated to the latest version of the CC extensions Manager? Could you try to uncheck the option 'Allow the extensions Manager to access the Internet' in the Preferences dialog box, and then install it again?

• My performance of the Lightroom Develop Module does not work correctly.

  My performance of Lightroom is not great.  After you have installed the appropriate NVIDIA, GeForce card GTX 970 graph with 4 Gig of Ram, Windows 10 (latest version) with 32 Gig RAM and the latest version of Lightroom CC (2015.3), I am always facing update slow in the develop module image.  The software does not remember the excerpts that I created (1:1).  Whenever I click on a photo of the flows, the share of the image of being clear-> blur-> to clear, which take about 15-20 seconds.  This happens even though I have already generated previews 1:1 for all images in the catalog.  I need help to set the settings so that I can have a good experience with lightroom.

  I tried to follow some recommendations:

  1. leave a 160 Gig camera Raw Cache framework

  2. install an SSD for the start and placed the catalog Lighttroom and Cache folder under the default Images directory, under the my account profile

  3. has created a new catalog that is less than a few LIVE in size

  Posted below is my System Info.   Is there anything else I can do to make this work?  It's very frustrating!

  ---------------  SYSTEM INFO ------------------------------------

  Version of Lightroom: CC 2015.3 [1052427]

  License: Creative Cloud

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 3.5 GHz

  Built-in memory: 32717,7 MB

  Real memory for Lightroom: 32717,7 MB

  Real memory used by Lightroom: 925,4 Mo (2.8%)

  Virtual memory used by Lightroom: 1086,4 MB

  Memory cache size: 0.0 MB

  Maximum thread count used by Camera Raw: 8

  Camera Raw SIMD optimization: SSE2, AVX, AVX2

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1920 x 1200

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  GeForce GTX PCIe/970/SSE2

  Check the supported OpenGL: past

  Provider: NVIDIA Corporation

  Version: 3.3.0 NVIDIA 359.00

  Rendering engine: GeForce GTX PCIe/970/SSE2

  LanguageVersion: 3,30 NVIDIA via the Cg compiler

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: C:\Users\Johnny\Pictures\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\Johnny\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) home canon Plugin

  (2) Facebook

  (3) Flickr

  (4) HDR Efex Pro 2

  (5) attachment Plugin Leica

  (6) home Plugin Nikon

  (7) perfect B & & W 9

  (8) perfect effects 9

  (9) perfect improve 9

  (10) perfect photo Suite 9

  (11) perfect Portrait 9

  (12) resize perfect 9

  Config.LUA flags: None

  Map #1: Seller: 10de

  Feature: 13 c 2

  Subsystem: 29783842

  Revision: a1

  Video memory: 4008

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  I uninstalled Lightroom CC.  renamed the Lightroom to my profile folder, rebooted the PC.  Reinstalled lightroom CC, choose to create a new lightroom catalog, any of a local session of my C:\ Image folder.  The behavior is the same.  Lightroom does not remember previews and continuous 'loading' and make turn the wheel little whenever I click on an image of the band.  It's crazy...

  You're clicking on between images in the Strip to develop? The develop module does NOT use 1:1 previews. Those that are used only in the library. Develop, Lightroom must load the raw file and return each time, this isn't a good solution to quickly go through images to work to develop. It should take a few seconds to fully make a new raw image loaded it depending on the size of your images are. If you want to speed up switching to develop image there are solutions. One is a raw cache big camera, that you already use and secondly to disable acceleration of graphics card, which, if enabled, slows down the initial loading. Finally, you must ensure that you are the 2015.3 or the 2015.1.1, and that you do not have 2015.2. Version 2 had several bugs that could slow this process terribly.

  15-20 seconds is extremely long for this process of loading in my experience. I can't get it to be slow on a much less powerful system than if the files are > 500 MB high resolution stitched tiff files. Not with RAW files (I pull a 24 Megapixel). If they are raw files, something is wrong. You have turned off the facial recognition?

• The specified service does not exist as an installed service. (Error code: 0 x 80070424)

  I tried to turn on my Windows Firewall because they all stopped working for some reason any

  & When I tried turning on setting recommended my tittes name appears. PLEAS HELP

  The specified service does not exist as an installed service. (Error Code: 0 x 80070424)

  I tried to turn on my Windows Firewall because they all stopped working for some reason any

  & When I tried turning on setting recommended my tittes name appears. PLEAS HELP

  The specified service does not exist as an installed service. (Error Code: 0 x 80070424)

  The name of your what appears?

  Error 0 x 80070424   See: http://support.microsoft.com/kb/968002

• Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

  My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

  Hello

  Windows Defender is an antispyware software, not an Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And try this method for the analysis of Malware

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• The sketches app does not open, it tries then crashes... Several projects are being developed

  The sketches app does not open, it tries then crashes... Have several projects under development... Any suggestions?

  Hi Brian,.

  Really strange. Try to uninstall and reinstall the application.

  Let me know how it goes.

  Sue.

• The star rating does not appear on the image on the film after being assigned in the develop module. How can this be repaired?

  The star rating does not appear on the image in the film after being assigned in the library or development module. He uses appears before the last update.  How can it be fixed?

  Hi annl98929431,

  Greetings.

  Make slide film and make it appear larger than it is now.

  • https://helpx.Adobe.com/Lightroom/help/view-photos.html

  Concerning

  Rohit

• I have an Acer - processor AMD A10, 16gig ram desktop pc, I've upgraded to windows windows 10 8. When I open lightroom everything is ok in the library. When I select develop LR does not and I have to close it. If I delete a photo from the library of the h

  I have an Acer - processor AMD A10, 16gig ram desktop pc, I've upgraded to windows windows 10 8. When I open lightroom everything is ok in the library. When I select develop LR does not and I have to close it. If I delete a photo from the library of the same thing happens. How can I fix this., he can be to stop what is happening

  Hello Sarika

  Thanks for your help.

  It's not that simple I thought he'd be when I used your method that whenever I tried to uncheck 'Use graphics processor' Lightroom 6 crashed.

  At least you put me on the right track and I persevered and found the file relevant agprefs of Lightroom web help and followed the instructions to change manually.

  I have changed two files with the same name but stored in different locations.

  Everything works fine now.

  Thank you once again.

  Mick

• offline activation code how can I get a when the site getactivated does not work?  MSG: failed to process your request. Please try again later.  Help!

  Activation code offline - how to do when the site: getactivated does not work?  MSG: Failed to process your request. Please try again later.    Help!

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I just installed photoshop elements 14. the photomerge menu does not appear on the tab improve? I can only find it on the guided edits. Is that how it is supposed to be?

  I just installed photoshop elements 14. the photomerge menu does not appear on the tab improve? I can only find it on the guided edits. Is that how it is supposed to be?

  Hi rpwines

  Fuse are now under guided edit

  You have it the way it should be.

  

  Please consult help of Photoshop Elements | Guided - mode Photomerge edits

  Gor Features.See new more using Photoshop Elements. What's new in Photoshop elements 14

  Concerning

  ~ Assani

• Why the serial number does not appear after typing the code out of the card I bought?

  Why the serial number does not appear after typing the code out of the card I bought?

  See the following topics:

  Using redemption code

  --------------------

  http://helpx.Adobe.com/x-productkb/global/redemption-code-help.html

• Code 19. My CD/DVD readers does not

  Code 19. My CD/DVD readers used to work properly. After that some windows updates, my CD/DVD drive is not listed or recognized. I tried the Auto Fix It utility, but always by car is not recognized. Help, please.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.